View source for Intersecting number wheels

{{task}}

A number wheel has:
* A ''name'' which is an uppercase letter.
* A set of ordered ''values'' which are either ''numbers'' or ''names''.

<br>A ''number'' is generated/yielded from a named wheel by:
:1. Starting at the first value of the named wheel and advancing through subsequent values and wrapping around to the first value to form a "wheel":
::1.a If the value is a number, yield it.
::1.b If the value is a name, yield the next value from the named wheel
::1.c Advance the position of this wheel.

Given the wheel
: <code>A: 1 2 3</code>
the number 1 is first generated, then 2, then 3, 1, 2, 3, 1, ...

'''Note:''' When more than one wheel is defined as a set of intersecting wheels then the 
first named wheel is assumed to be the one that values are generated from.

;Examples:
Given the wheels:
    A: 1 B 2
    B: 3 4
The series of numbers generated starts:
    1, 3, 2, 1, 4, 2, 1, 3, 2, 1, 4, 2, 1, 3, 2...

The intersections of number wheels can be more complex, (and might loop forever),
and wheels may be multiply connected. <br>

'''Note:''' If a named wheel is referenced more than 
once by one or many other wheels, then there is only one position of the wheel 
that is advanced by each and all references to it.

E.g.
  A:  1 D D
  D:  6 7 8
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...    

;Task:
Generate and show the first twenty terms of the sequence of numbers generated 
from these groups:

    Intersecting Number Wheel group:
      A:  1 2 3
    
    Intersecting Number Wheel group:
      A:  1 B 2
      B:  3 4
    
    Intersecting Number Wheel group:
      A:  1 D D
      D:  6 7 8
    
    Intersecting Number Wheel group:
      A:  1 B C
      B:  3 4
      C:  5 B

Show your output here, on this page.

<br>

=={{header|11l}}==
{{trans|Python}}

<syntaxhighlight lang="11l">F nextfrom(&w, =name)
   L
      V nxt = w[name][0]
      w[name] = w[name][1..] + w[name][0.<1]
      I nxt[0] C ‘0’..‘9’
         R nxt
      name = nxt

L(group) |‘A: 1 2 3
           A: 1 B 2; B: 3 4
           A: 1 D D; D: 6 7 8
           A: 1 B C; B: 3 4; C: 5 B’.split("\n")
   print("Intersecting Number Wheel group:\n  "group)
   [String = [String]] wheel
   V first = ‘’
   L(w) group.split(‘;’)
      V s = w.trim(‘ ’).split(‘ ’)
      V name = s[0]
      wheel[name[0 .< (len)-1]] = s[1..]
      first = I first == ‘’ {name[0 .< (len)-1]} E first
   V gen = (0.<20).map(i -> nextfrom(&@wheel, @first)).join(‘ ’)
   print("  Generates:\n    "gen" ...\n")</syntaxhighlight>

{{out}}
<pre>
Intersecting Number Wheel group:
  A: 1 2 3
  Generates:
    1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  A: 1 B 2; B: 3 4
  Generates:
    1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  A: 1 D D; D: 6 7 8
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  A: 1 B C; B: 3 4; C: 5 B
  Generates:
    1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|ALGOL 68}}==
<syntaxhighlight lang="algol68">BEGIN
    # a number wheel element                                                  #
    MODE NWELEMENT = UNION( CHAR # wheel name #, INT # wheel value # );
    # a number wheel                                                          #
    MODE NW = STRUCT( CHAR name, REF INT position, FLEX[ 1 : 0 ]NWELEMENT values );
    # get the next value from a number wheel in an array of number wheels     #
    # note: invalid wheel names will cause subscript range errors             #
    OP   NEXT = ( []NW wheels )INT:
         BEGIN
            INT  result;
            BOOL found := FALSE;
            INT  w     := LWB wheels; # start with the first wheel            #
            WHILE NOT found DO
                IF position OF wheels[ w ] > UPB values OF wheels[ w ] THEN
                    # passed the end of the wheel, go back to the start       #
                    position OF wheels[ w ] := LWB values OF wheels[ w ]
                FI;
                NWELEMENT e = ( values OF wheels[ w ] )[ position OF wheels[ w ] ];
                position OF wheels[ w ] +:= 1;
                CASE e
                  IN ( INT  n ): BEGIN result := n; found := TRUE END
                   , ( CHAR c ): BEGIN
                                     w := LWB wheels;
                                     WHILE name OF wheels[ w ] /= c DO w +:= 1 OD
                                 END
                ESAC
            OD;
            result
         END # NEXT # ;
    # prints the first n values from an array of wheels                       #
    PROC show = ( INT n, []NW wheels )VOID:
         BEGIN
            print( ( "First ", whole( n, 0 ), " values from the Intersecting Number Wheels:" ) );
            FOR i FROM LWB wheels TO UPB wheels DO
                print( ( newline, "    ", name OF wheels[ i ], ":" ) );
                FOR v FROM LWB values OF wheels[ i ] TO UPB values OF wheels[ i ] DO
                    CASE ( values OF wheels[ i ] )[ v ]
                      IN ( INT  n ): print( ( " ", whole( n, 0 ) ) )
                       , ( CHAR c ): print( ( " ", c ) )
                    ESAC
                OD
            OD;
            print( ( newline, "        " ) );
            FOR i TO n DO print( ( " ", whole( NEXT wheels, 0 ) ) ) OD;
            print( ( newline, newline ) )
         END # show # ;
    # show some wheels in action                                              #
    show( 20, ( NW( "A", LOC INT := 1, (  1,   2,   3  ) ) ) );
    show( 20, ( NW( "A", LOC INT := 1, (  1,  "B",  2  ) )
              , NW( "B", LOC INT := 1, (  3,   4       ) ) ) );
    show( 20, ( NW( "A", LOC INT := 1, (  1,  "D", "D" ) )
              , NW( "D", LOC INT := 1, (  6,   7,   8  ) ) ) );
    show( 20, ( NW( "A", LOC INT := 1, (  1,  "B", "C" ) )
              , NW( "B", LOC INT := 1, (  3,   4       ) )
              , NW( "C", LOC INT := 1, (  5,  "B"      ) ) ) )
END</syntaxhighlight>
{{out}}
<pre>
First 20 values from the Intersecting Number Wheels:
    A: 1 2 3
         1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2

First 20 values from the Intersecting Number Wheels:
    A: 1 B 2
    B: 3 4
         1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3

First 20 values from the Intersecting Number Wheels:
    A: 1 D D
    D: 6 7 8
         1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6

First 20 values from the Intersecting Number Wheels:
    A: 1 B C
    B: 3 4
    C: 5 B
         1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4

</pre>

=={{header|AutoHotkey}}==
<syntaxhighlight lang="autohotkey">obj1 := {"A":[1, 2, 3]}
obj2 := {"A":[1, "B", 2]	, "B":[3, 4]}
obj3 := {"A":[1, "D", "D"]	, "D":[6, 7, 8]}
obj4 := {"A":[1, "B", "C"]	, "B":[3, 4]	, "C":[5, "B"]}

loop 4
{
	str := ""
	for k, v in obj%A_Index% {
		str .= "{" k " : " 
		for i, t in v
			str .= t ","
		str := Trim(str, ",") "}, "
	}
	str := Trim(str, ", ")
	x := INW(obj%A_Index%)
	result .= str "`n" x.1 "`n" x.2 "`n------`n"
}
MsgBox % result
return

INW(obj, num:=20){
	sets := [], ptr := []
	for k, v in obj {
		if A_Index=1
			s := k, s1 := k
		%k% := v, sets.Push(k), ptr[k] := 0
	}
	loop % num {
		ptr[s]++				
		while !((v := %s%[ptr[s]]) ~= "\d") {
			s := %s%[ptr[s]]
			ptr[s]++
		}
		key .= s "." ptr[s] ", "
		result .= %s%[ptr[s]] "    "
		s := s1
		for i, set in sets
			ptr[set] := ptr[set] = %set%.count() ? 0 : ptr[set]
	}
	return [key, result]
}</syntaxhighlight>
{{out}}
<pre>{A : 1,2,3}
A.1, A.2, A.3, A.1, A.2, A.3, A.1, A.2, A.3, A.1, A.2, A.3, A.1, A.2, A.3, A.1, A.2, A.3, A.1, A.2, 
1    2    3    1    2    3    1    2    3    1    2    3    1    2    3    1    2    3    1    2    
------
{A : 1,B,2}, {B : 3,4}
A.1, B.1, A.3, A.1, B.2, A.3, A.1, B.1, A.3, A.1, B.2, A.3, A.1, B.1, A.3, A.1, B.2, A.3, A.1, B.1, 
1    3    2    1    4    2    1    3    2    1    4    2    1    3    2    1    4    2    1    3    
------
{A : 1,D,D}, {D : 6,7,8}
A.1, D.1, D.2, A.1, D.3, D.1, A.1, D.2, D.3, A.1, D.1, D.2, A.1, D.3, D.1, A.1, D.2, D.3, A.1, D.1, 
1    6    7    1    8    6    1    7    8    1    6    7    1    8    6    1    7    8    1    6    
------
{A : 1,B,C}, {B : 3,4}, {C : 5,B}
A.1, B.1, C.1, A.1, B.2, B.1, A.1, B.2, C.1, A.1, B.1, B.2, A.1, B.1, C.1, A.1, B.2, B.1, A.1, B.2, 
1    3    5    1    4    3    1    4    5    1    3    4    1    3    5    1    4    3    1    4    
------</pre>

=={{header|C}}==
<syntaxhighlight lang="c">#include <stdio.h>
#include <stdlib.h>
#include <string.h>

struct Wheel {
    char *seq;
    int len;
    int pos;
};

struct Wheel *create(char *seq) {
    struct Wheel *w = malloc(sizeof(struct Wheel));
    if (w == NULL) {
        return NULL;
    }

    w->seq = seq;
    w->len = strlen(seq);
    w->pos = 0;

    return w;
}

char cycle(struct Wheel *w) {
    char c = w->seq[w->pos];
    w->pos = (w->pos + 1) % w->len;
    return c;
}

struct Map {
    struct Wheel *v;
    struct Map *next;
    char k;
};

struct Map *insert(char k, struct Wheel *v, struct Map *head) {
    struct Map *m = malloc(sizeof(struct Map));
    if (m == NULL) {
        return NULL;
    }

    m->k = k;
    m->v = v;
    m->next = head;

    return m;
}

struct Wheel *find(char k, struct Map *m) {
    struct Map *ptr = m;

    while (ptr != NULL) {
        if (ptr->k == k) {
            return ptr->v;
        }
        ptr = ptr->next;
    }

    return NULL;
}

void printOne(char k, struct Map *m) {
    struct Wheel *w = find(k, m);
    char c;

    if (w == NULL) {
        printf("Missing the wheel for: %c\n", k);
        exit(1);
    }

    c = cycle(w);
    if ('0' <= c && c <= '9') {
        printf(" %c", c);
    } else {
        printOne(c, m);
    }
}

void exec(char start, struct Map *m) {
    struct Wheel *w;
    int i;

    if (m == NULL) {
        printf("Unable to proceed.");
        return;
    }

    for (i = 0; i < 20; i++) {
        printOne(start, m);
    }
    printf("\n");
}

void group1() {
    struct Wheel *a = create("123");

    struct Map *m = insert('A', a, NULL);

    exec('A', m);
}

void group2() {
    struct Wheel *a = create("1B2");
    struct Wheel *b = create("34");

    struct Map *m = insert('A', a, NULL);
    m = insert('B', b, m);

    exec('A', m);
}

void group3() {
    struct Wheel *a = create("1DD");
    struct Wheel *d = create("678");

    struct Map *m = insert('A', a, NULL);
    m = insert('D', d, m);

    exec('A', m);
}

void group4() {
    struct Wheel *a = create("1BC");
    struct Wheel *b = create("34");
    struct Wheel *c = create("5B");

    struct Map *m = insert('A', a, NULL);
    m = insert('B', b, m);
    m = insert('C', c, m);

    exec('A', m);
}

int main() {
    group1();
    group2();
    group3();
    group4();

    return 0;
}</syntaxhighlight>
{{out}}
<pre> 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|C sharp}}==
<syntaxhighlight lang="csharp">using System;
using System.Collections.Generic;
using System.Linq;

public static class IntersectingNumberWheels
{
    public static void Main() {
        TurnWheels(('A', "123")).Take(20).Print();
        TurnWheels(('A', "1B2"), ('B', "34")).Take(20).Print();
        TurnWheels(('A', "1DD"), ('D', "678")).Take(20).Print();
        TurnWheels(('A', "1BC"), ('B', "34"), ('C', "5B")).Take(20).Print();
    }

    static IEnumerable<char> TurnWheels(params (char name, string values)[] wheels) {
        var data = wheels.ToDictionary(wheel => wheel.name, wheel => wheel.values.Loop().GetEnumerator());
        var primary = data[wheels[0].name];
        while (true) {
            yield return Turn(primary);
        }

        char Turn(IEnumerator<char> sequence) {
            sequence.MoveNext();
            char c = sequence.Current;
            return char.IsDigit(c) ? c : Turn(data[c]);
        }
    }

    static IEnumerable<T> Loop<T>(this IEnumerable<T> seq) {
        while (true) {
            foreach (T element in seq) yield return element;
        }
    }

    static void Print(this IEnumerable<char> sequence) => Console.WriteLine(string.Join(" ", sequence));
}</syntaxhighlight>
{{out}}
<pre>
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|C++}}==
{{trans|D}}
<syntaxhighlight lang="cpp">#include <initializer_list>
#include <iostream>
#include <map>
#include <vector>

struct Wheel {
private:
    std::vector<char> values;
    size_t index;

public:
    Wheel() : index(0) {
        // empty
    }

    Wheel(std::initializer_list<char> data) : values(data), index(0) {
        //values.assign(data);
        if (values.size() < 1) {
            throw new std::runtime_error("Not enough elements");
        }
    }

    char front() {
        return values[index];
    }

    void popFront() {
        index = (index + 1) % values.size();
    }
};

struct NamedWheel {
private:
    std::map<char, Wheel> wheels;

public:
    void put(char c, Wheel w) {
        wheels[c] = w;
    }

    char front(char c) {
        char v = wheels[c].front();
        while ('A' <= v && v <= 'Z') {
            v = wheels[v].front();
        }
        return v;
    }

    void popFront(char c) {
        auto v = wheels[c].front();
        wheels[c].popFront();

        while ('A' <= v && v <= 'Z') {
            auto d = wheels[v].front();
            wheels[v].popFront();
            v = d;
        }
    }
};

void group1() {
    Wheel w({ '1', '2', '3' });
    for (size_t i = 0; i < 20; i++) {
        std::cout << ' ' << w.front();
        w.popFront();
    }
    std::cout << '\n';
}

void group2() {
    Wheel a({ '1', 'B', '2' });
    Wheel b({ '3', '4' });

    NamedWheel n;
    n.put('A', a);
    n.put('B', b);

    for (size_t i = 0; i < 20; i++) {
        std::cout << ' ' << n.front('A');
        n.popFront('A');
    }
    std::cout << '\n';
}

void group3() {
    Wheel a({ '1', 'D', 'D' });
    Wheel d({ '6', '7', '8' });

    NamedWheel n;
    n.put('A', a);
    n.put('D', d);

    for (size_t i = 0; i < 20; i++) {
        std::cout << ' ' << n.front('A');
        n.popFront('A');
    }
    std::cout << '\n';
}

void group4() {
    Wheel a({ '1', 'B', 'C' });
    Wheel b({ '3', '4' });
    Wheel c({ '5', 'B' });

    NamedWheel n;
    n.put('A', a);
    n.put('B', b);
    n.put('C', c);

    for (size_t i = 0; i < 20; i++) {
        std::cout << ' ' << n.front('A');
        n.popFront('A');
    }
    std::cout << '\n';
}

int main() {
    group1();
    group2();
    group3();
    group4();

    return 0;
}</syntaxhighlight>
{{out}}
<pre> 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|D}}==
<syntaxhighlight lang="d">import std.exception;
import std.range;
import std.stdio;

struct Wheel {
    private string[] values;
    private uint index;

    invariant {
        enforce(index < values.length, "index out of range");
    }

    this(string[] value...) in {
        enforce(value.length > 0, "Cannot create a wheel with no elements");
    } body {
        values = value;
    }

    enum empty = false;

    auto front() {
        return values[index];
    }

    void popFront() {
        index = (index + 1) % values.length;
    }
}

struct NamedWheel {
    private Wheel[char] wheels;
    char m;

    this(char c, Wheel w) {
        add(c, w);
        m = c;
    }

    void add(char c, Wheel w) {
        wheels[c] = w;
    }

    enum empty = false;

    auto front() {
        auto v = wheels[m].front;
        char c = v[0];
        while ('A' <= c && c <= 'Z') {
            v = wheels[c].front;
            c = v[0];
        }
        return v;
    }

    void popFront() {
        auto v = wheels[m].front;
        wheels[m].popFront;

        char c = v[0];
        while ('A' <= c && c <= 'Z') {
            auto d = wheels[c].front;
            wheels[c].popFront;
            c = d[0];
        }
    }
}

void group1() {
    auto a = Wheel("1", "2", "3");
    a.take(20).writeln;
}

void group2() {
    auto a = Wheel("1", "B", "2");
    auto b = Wheel("3", "4");

    auto n = NamedWheel('A', a);
    n.add('B', b);

    n.take(20).writeln;
}

void group3() {
    auto a = Wheel("1", "D", "D");
    auto d = Wheel("6", "7", "8");

    auto n = NamedWheel('A', a);
    n.add('D', d);

    n.take(20).writeln;
}

void group4() {
    auto a = Wheel("1", "B", "C");
    auto b = Wheel("3", "4");
    auto c = Wheel("5", "B");

    auto n = NamedWheel('A', a);
    n.add('B', b);
    n.add('C', c);

    n.take(20).writeln;
}

void main() {
    group1();
    group2();
    group3();
    group4();
}</syntaxhighlight>
{{out}}
<pre>["1", "2", "3", "1", "2", "3", "1", "2", "3", "1", "2", "3", "1", "2", "3", "1", "2", "3", "1", "2"]
["1", "3", "2", "1", "4", "2", "1", "3", "2", "1", "4", "2", "1", "3", "2", "1", "4", "2", "1", "3"]
["1", "6", "7", "1", "8", "6", "1", "7", "8", "1", "6", "7", "1", "8", "6", "1", "7", "8", "1", "6"]
["1", "3", "5", "1", "4", "3", "1", "4", "5", "1", "3", "4", "1", "3", "5", "1", "4", "3", "1", "4"]</pre>

=={{header|F_Sharp|F#}}==
<syntaxhighlight lang="fsharp">
// Wheels within wheels. Nigel Galloway: September 30th., 2019. 
let N(n)=fun()->n
let wheel(n:(unit->int)[])=let mutable g= -1 in (fun()->g<-(g+1)%n.Length; n.[g]())
let A1=wheel[|N(1);N(2);N(3)|]
for n in 0..20 do printf "%d " (A1())
printfn ""
let B2=wheel[|N(3);N(4)|]
let A2=wheel[|N(1);B2;N(2)|]
for n in 0..20 do printf "%d " (A2())
printfn ""
let D3=wheel[|N(6);N(7);N(8)|]
let A3=wheel[|N(1);D3;D3|]
for n in 0..20 do printf "%d " (A3())
printfn ""
let B4=wheel[|N(3);N(4)|]
let C4=wheel[|N(5);B4|]
let A4=wheel[|N(1);B4;C4|]
for n in 0..20 do printf "%d " (A4())
printfn ""
</syntaxhighlight>
{{out}}
<pre>
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 7
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 5
</pre>

=={{header|Factor}}==
An attempt has been made to simplify the interface as much as possible by creating a natural literal syntax for number wheel groups. This should be useful for exploring these types of sequences in the future.
<code>nw-parser</code> is an EBNF grammar that turns
<pre>
"A: 1 B C\nB: 3 4\nC: 5 B"
</pre>
into
<pre>
{
    { "A" T{ number-wheel { seq T{ circular { seq { 1 "B" "C" } } } } { i 0 } } }
    { "B" T{ number-wheel { seq T{ circular { seq { 3 4 } } } } { i 0 } } }
    { "C" T{ number-wheel { seq T{ circular { seq { 5 "B" } } } } { i 0 } } }
}
</pre>
⁠— a dictionary-like structure that is transformed into a lazy list which yields the expected sequence elements.
{{works with|Factor|0.99 2019-07-10}}
<syntaxhighlight lang="factor">USING: accessors assocs circular io kernel lists lists.lazy math
math.parser multiline peg.ebnf prettyprint prettyprint.custom
sequences strings ;
IN: rosetta-code.number-wheels

TUPLE: group pretty list ;

C: <group> group

M: group pprint* pretty>> write ;

TUPLE: number-wheel seq i ;

: <number-wheel> ( seq -- number-wheel )
    <circular> 0 number-wheel boa ;

: yield ( assoc -- n )
    dup first first [ dup integer? ]
    [ dupd of [ i>> ] [ [ 1 + ] change-i seq>> nth ] bi ] until
    nip ;

: number-wheel>lazy ( assoc -- list )
    0 lfrom swap [ yield nip ] curry lmap-lazy ;

EBNF: nw-parser [=[
    num   = [0-9]+ => [[ >string string>number ]]
    name  = [a-zA-Z]+ => [[ >string ]]
    wheel = (" "~ (num | name))+ "\n"?
          => [[ but-last first <number-wheel> ]]
    group = (name ":"~ wheel)+ => [[ number-wheel>lazy ]]
]=]

SYNTAX: NUMBER-WHEELS: parse-here dup nw-parser <group> suffix! ;

: .take ( n group -- )
    list>> ltake list>array [ pprint bl ] each "..." print ;</syntaxhighlight>
Now the interface defined above may be used:
<syntaxhighlight lang="factor">USING: generalizations io kernel prettyprint
rosetta-code.number-wheels ;

NUMBER-WHEELS:
A: 1 2 3
;

NUMBER-WHEELS:
A: 1 B 2
B: 3 4
;

NUMBER-WHEELS:
A: 1 D D
D: 6 7 8
;

NUMBER-WHEELS:
A: 1 B C
B: 3 4
C: 5 B
;

[ 
    "Intersecting number wheel group:" print
    [ . ] [ "Generates:" print 20 swap .take nl ] bi
] 4 napply</syntaxhighlight>
{{out}}
<pre>
Intersecting number wheel group:
A: 1 2 3
Generates:
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting number wheel group:
A: 1 B 2
B: 3 4
Generates:
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting number wheel group:
A: 1 D D
D: 6 7 8
Generates:
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting number wheel group:
A: 1 B C
B: 3 4
C: 5 B
Generates:
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|Go}}==
<syntaxhighlight lang="go">package main

import (
    "fmt"
    "sort"
    "strconv"
)

type wheel struct {
    next   int
    values []string
}

type wheelMap = map[string]wheel

func generate(wheels wheelMap, start string, maxCount int) {
    count := 0
    w := wheels[start]
    for {
        s := w.values[w.next]
        v, err := strconv.Atoi(s)
        w.next = (w.next + 1) % len(w.values)
        wheels[start] = w
        if err == nil {
            fmt.Printf("%d ", v)
            count++
            if count == maxCount {
                fmt.Println("...\n")
                return
            }
        } else {
            for {
                w2 := wheels[s]
                ss := s
                s = w2.values[w2.next]
                w2.next = (w2.next + 1) % len(w2.values)
                wheels[ss] = w2
                v, err = strconv.Atoi(s)
                if err == nil {
                    fmt.Printf("%d ", v)
                    count++
                    if count == maxCount {
                        fmt.Println("...\n")
                        return
                    }
                    break
                }
            }
        }
    }
}

func printWheels(wheels wheelMap) {
    var names []string
    for name := range wheels {
        names = append(names, name)
    }
    sort.Strings(names)
    fmt.Println("Intersecting Number Wheel group:")
    for _, name := range names {
        fmt.Printf("  %s: %v\n", name, wheels[name].values)
    }
    fmt.Print("  Generates:\n    ")
}

func main() {
    wheelMaps := []wheelMap{
        {
            "A": {0, []string{"1", "2", "3"}},
        },
        {
            "A": {0, []string{"1", "B", "2"}},
            "B": {0, []string{"3", "4"}},
        },
        {
            "A": {0, []string{"1", "D", "D"}},
            "D": {0, []string{"6", "7", "8"}},
        },
        {
            "A": {0, []string{"1", "B", "C"}},
            "B": {0, []string{"3", "4"}},
            "C": {0, []string{"5", "B"}},
        },
    }
    for _, wheels := range wheelMaps {
        printWheels(wheels)
        generate(wheels, "A", 20)
    }
}</syntaxhighlight>

{{out}}
<pre>
Intersecting Number Wheel group:
  A: [1 2 3]
  Generates:
    1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  A: [1 B 2]
  B: [3 4]
  Generates:
    1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  A: [1 D D]
  D: [6 7 8]
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  A: [1 B C]
  B: [3 4]
  C: [5 B]
  Generates:
    1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|Haskell}}==

Defining a unit movement of the interlocking wheels as a recursive descent, 
terminating at the first digit found, and printing a map-accumulation of that recursion over a list of given length but arbitrary content.

<syntaxhighlight lang="haskell">import Data.Char (isDigit)
import Data.List (mapAccumL)
import qualified Data.Map.Strict as M
import Data.Maybe (fromMaybe)

---------------- INTERSECTING NUMBER WHEELS --------------

clockWorkTick ::
  M.Map Char String ->
  (M.Map Char String, Char)
clockWorkTick = flip click 'A'
  where
    click wheels name
      | isDigit name = (wheels, name)
      | otherwise =
        ( click
            . flip
              (M.insert name . leftRotate)
              wheels
            <*> head
        )
          $ fromMaybe ['?'] $ M.lookup name wheels

leftRotate :: [a] -> [a]
leftRotate = take . length <*> (tail . cycle)

--------------------------- TEST -------------------------
main :: IO ()
main = do
  let wheelSets =
        [ [('A', "123")],
          [('A', "1B2"), ('B', "34")],
          [('A', "1DD"), ('D', "678")],
          [('A', "1BC"), ('B', "34"), ('C', "5B")]
        ]
  putStrLn "State of each wheel-set after 20 clicks:\n"
  mapM_ print $
    fmap
      ( flip
          (mapAccumL (const . clockWorkTick))
          (replicate 20 undefined)
          . M.fromList
      )
      wheelSets
  putStrLn "\nInitial state of the wheel-sets:\n"
  mapM_ print wheelSets</syntaxhighlight>
{{Out}}
<pre>State of each wheel-set after 20 clicks:

(fromList [('A',"312")],"12312312312312312312")
(fromList [('A',"21B"),('B',"43")],"13214213214213214213")
(fromList [('A',"D1D"),('D',"786")],"16718617816718617816")
(fromList [('A',"C1B"),('B',"34"),('C',"5B")],"13514314513413514314")

Initial state of the wheel-sets:

[('A',"123")]
[('A',"1B2"),('B',"34")]
[('A',"1DD"),('D',"678")]
[('A',"1BC"),('B',"34"),('C',"5B")]</pre>

=={{header|J}}==
Implementation:
<syntaxhighlight lang="j">
wheelgroup=:{{
  yield_wheelgroup_=: {{
    i=. wheels i.<;y
    j=. i{inds
    k=. ".;y
    l=. j{k
    inds=: ((#k)|1+j) i} inds
    if. l e. wheels
    do.yield l
    else.{.".;l
    end.
  }}
  gen_wheelgroup_=: {{
    yield wheel
  }}
  grp=. cocreate ''
  coinsert__grp 'wheelgroup'
  specs__grp=: cut each boxopen m
  wheel__grp=: ;{.wheels__grp=: {.every specs__grp
  init__grp=: {{('inds';wheels)=:(0#~#specs);}.each specs}}
  init__grp''
  ('gen_',(;grp),'_')~
}}
</syntaxhighlight>

Task examples:

<syntaxhighlight lang="j">
   task=: {{y wheelgroup^:(1+i.20)_}}
   task 'A 1 2 3'
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
   task 'A 1 B 2';'B 3 4'
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
   task 'A 1 D D';'D 6 7 8'
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
   task 'A 1 B C';'B 3 4';'C 5 B'
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4
</syntaxhighlight>

=={{header|Java}}==
<syntaxhighlight lang="java">
package intersectingNumberWheels;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.stream.IntStream;

public class WheelController {
	private static final String IS_NUMBER = "[0-9]";
	private static final int TWENTY = 20;
	private static Map<String, WheelModel> wheelMap;

	public static void advance(String wheel) {
		WheelModel w = wheelMap.get(wheel);
		if (w.list.get(w.position).matches(IS_NUMBER)) {
			w.printThePosition();
			w.advanceThePosition();
		} else {
			String wheelName = w.list.get(w.position);
			advance(wheelName);
			w.advanceThePosition();
		}
	}

	public static void run() {
		System.out.println(wheelMap);
		IntStream.rangeClosed(1, TWENTY).forEach(i -> advance("A"));
		System.out.println();
		wheelMap.clear();
	}

	public static void main(String[] args) {
		wheelMap = new HashMap<>();
		wheelMap.put("A", new WheelModel("A", "1", "2", "3"));
		run();
		wheelMap.put("A", new WheelModel("A", "1", "B", "2"));
		wheelMap.put("B", new WheelModel("B", "3", "4"));
		run();
		wheelMap.put("A", new WheelModel("A", "1", "D", "D"));
		wheelMap.put("D", new WheelModel("D", "6", "7", "8"));
		run();
		wheelMap.put("A", new WheelModel("A", "1", "B", "C"));
		wheelMap.put("B", new WheelModel("B", "3", "4"));
		wheelMap.put("C", new WheelModel("C", "5", "B"));
		run();
	}

}

class WheelModel {
	String name;
	List<String> list;
	int position;
	int endPosition;
	private static final int INITIAL = 0;

	public WheelModel(String name, String... values) {
		super();

		this.name = name.toUpperCase();
		this.list = new ArrayList<>();
		for (String value : values) {
			list.add(value);
		}
		this.position = INITIAL;
		this.endPosition = this.list.size() - 1;
	}

	@Override
	public String toString() {
		return list.toString();
	}

	public void advanceThePosition() {
		if (this.position == this.endPosition) {
			this.position = INITIAL;// new beginning
		} else {
			this.position++;// advance position
		}
	}

	public void printThePosition() {
		System.out.print(" " + this.list.get(position));
	}
}
</syntaxhighlight>
Output:
{A=[1, 2, 3]}
 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
{A=[1, B, 2], B=[3, 4]}
 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
{A=[1, D, D], D=[6, 7, 8]}
 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
{A=[1, B, C], B=[3, 4], C=[5, B]}
 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4

=={{header|JavaScript}}==
Map-accumulation of a recursive digit-search,
over an array of given length and arbitrary contents.
{{Trans|Haskell}}
{{Trans|Python}}
<syntaxhighlight lang="javascript">(() => {
    'use strict';

    // main :: IO ()
    const main = () => {

        // clockWorkTick :: Dict -> (Dict, Char)
        const clockWorkTick = wheelMap => {
            // The new configuration of the wheels, tupled with
            // a digit found by recursive descent from a single
            // click of the first wheel.
            const click = wheels => wheelName => {
                const
                    wheel = wheels[wheelName] || ['?'],
                    v = wheel[0];
                return bool(click)(Tuple)(isDigit(v) || '?' === v)(
                    insertDict(wheelName)(
                        leftRotate(wheel)
                    )(wheels)
                )(v);
            };
            return click(wheelMap)('A');
        };

        // leftRotate ::[a] -> [a]
        const leftRotate = xs =>
            // The head of the list appended
            // to the tail of of the list.
            0 < xs.length ? (
                xs.slice(1).concat(xs[0])
            ) : [];


        // TEST -------------------------------------------
        // State of each wheel-set after 20 clicks,
        // paired with the resulting series of characters.

        const tuple = uncurry(Tuple);
        const wheelLists = [
            [tuple('A', '123')],
            [tuple('A', '1B2'), tuple('B', '34')],
            [tuple('A', '1DD'), tuple('D', '678')],
            [tuple('A', '1BC'), tuple('B', '34'), tuple('C', '5B')]
        ];

        console.log([
            'Series and state of each wheel-set after 20 clicks:\n',
            unlines(
                map(tuples => showWheels(
                    mapAccumL(
                        compose(constant, clockWorkTick)
                    )(dictFromList(tuples))(replicate(20)(''))
                ))(wheelLists)
            ),
            '\nInitial state of each wheel-set:\n',
            map(map(compose(
                JSON.stringify,
                dictFromList,
                x => [Array.from(x)]
            )))(wheelLists).join('\n')
        ].join('\n'));
    };

    // DISPLAY FORMATTING ---------------------------------

    // showWheels :: (Dict, [Char]) -> String
    const showWheels = tpl =>
        JSON.stringify(
            Array.from(secondArrow(concat)(tpl))
        );

    // GENERIC FUNCTIONS ----------------------------------

    // Tuple (,) :: a -> b -> (a, b)
    const Tuple = a => b => ({
        type: 'Tuple',
        '0': a,
        '1': b,
        length: 2
    });

    // bool :: a -> a -> Bool -> a
    const bool = f => t => p =>
        p ? t : f;

    // compose (<<<) :: (b -> c) -> (a -> b) -> a -> c
    const compose = (...fs) =>
        x => fs.reduceRight((a, f) => f(a), x);

    // concat :: [[a]] -> [a]
    // concat :: [String] -> String
    const concat = xs =>
        0 < xs.length ? (() => {
            const unit = 'string' !== typeof xs[0] ? (
                []
            ) : '';
            return unit.concat.apply(unit, xs);
        })() : [];

    // constant :: a -> b -> a
    const constant = k => _ => k;

    // dictFromList :: [(k, v)] -> Dict
    const dictFromList = kvs =>
        Object.fromEntries(kvs);

    // secondArrow :: (a -> b) -> ((c, a) -> (c, b))
    const secondArrow = f => xy =>
        // A function over a simple value lifted
        // to a function over a tuple.
        // f (a, b) -> (a, f(b))
        Tuple(xy[0])(
            f(xy[1])
        );

    // insertDict :: String -> a -> Dict -> Dict
    const insertDict = k => v => dct =>
        Object.assign({}, dct, {
            [k]: v
        });

    // isDigit :: Char -> Bool
    const isDigit = c => {
        const n = c.codePointAt(0);
        return 48 <= n && 57 >= n;
    };

    // map :: (a -> b) -> [a] -> [b]
    const map = f => xs =>
        (Array.isArray(xs) ? (
            xs
        ) : xs.split('')).map(f);

    // Map-accumulation is a combination of map and a catamorphism;
    // it applies a function to each element of a list, passing an
    // accumulating parameter from left to right, and returning a final
    // value of this accumulator together with the new list.

    // mapAccumL :: (acc -> x -> (acc, y)) -> acc -> [x] -> (acc, [y])
    const mapAccumL = f => acc => xs =>
        xs.reduce((a, x) => {
            const pair = f(a[0])(x);
            return Tuple(pair[0])(a[1].concat(pair[1]));
        }, Tuple(acc)([]));

    // replicate :: Int -> a -> [a]
    const replicate = n => x =>
        Array.from({
            length: n
        }, () => x);

    // uncurry :: (a -> b -> c) -> ((a, b) -> c)
    const uncurry = f =>
        (x, y) => f(x)(y);

    // unlines :: [String] -> String
    const unlines = xs => xs.join('\n');

    // MAIN ---
    return main();
})();</syntaxhighlight>
{{Out}}
<pre>Series and state of each wheel-set after 20 clicks:

[{"A":"312"},"12312312312312312312"]
[{"A":"21B","B":"43"},"13214213214213214213"]
[{"A":"D1D","D":"786"},"16718617816718617816"]
[{"A":"C1B","B":"34","C":"5B"},"13514314513413514314"]

Initial state of each wheel-set:

{"A":"123"}
{"A":"1B2"},{"B":"34"}
{"A":"1DD"},{"D":"678"}
{"A":"1BC"},{"B":"34"},{"C":"5B"}</pre>

=={{header|jq}}==
{{works with|jq}}
'''Also works with gojq, the Go implementation of jq'''

In this entry, a single wheel is simply represented by 
a JSON object of the form { name: array }

where `name` is its name, and `array` is an array of the values on the wheel in the order
in which they would be read.

A set of of number of wheels can thus be represented simply as the sum of the objects corresponding to each wheel.
Thus the collection of illustrative number wheel groups can be defined as follows:
<syntaxhighlight lang="jq">
def wheels: [
    {
        "A": [1, 2, 3]
    },
    {
        "A": [1, "B", 2],
        "B": [3, 4]
    },
    {
        "A": [1, "D", "D"],
        "D": [6, 7, 8]
    },
    {
        "A": [1, "B", "C"],
        "B": [3, 4],
        "C": [5, "B"]
    }
];
</syntaxhighlight>
<syntaxhighlight lang="jq">
# read($wheel)
# where $wheel is the wheel to be read (a string)
# Input: a set of wheels
# Output: an object such that .value is the next value, 
# and .state is the updated state of the set of wheels
def read($wheel):

  # Input: an array
  # Output: the rotated array
  def rotate: .[1:] + [.[0]];

  .[$wheel][0] as $value
  | (.[$wheel] |= rotate) as $state
  | if ($value | type) == "number"
    then {$value, $state}
    else $state | read($value)
    end;

# Read wheel $wheel $n times
def multiread($wheel; $n):
  if $n <= 0 then empty
  else read($wheel)
  | .value, (.state | multiread($wheel; $n - 1))
  end;

def printWheels:
  keys[] as $k
  | "\($k): \(.[$k])";

# Spin each group $n times
def spin($n):
  wheels[]
  | "The number wheel group:",
    printWheels,
    "generates",
    ([ multiread("A"; $n)  ] | join(" ") + " ..."),
    "";

spin(20)
</syntaxhighlight>
'''Invocation'''
<pre>
jq -nr -f intersecting-number-wheels.jq
</pre>

{{output}}
<pre>
The number wheel group:
A: [1,2,3]
generates
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

The number wheel group:
A: [1,"B",2]
B: [3,4]
generates
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

The number wheel group:
A: [1,"D","D"]
D: [6,7,8]
generates
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

The number wheel group:
A: [1,"B","C"]
B: [3,4]
C: [5,"B"]
generates
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|Julia}}==
<syntaxhighlight lang="julia">const d1 = Dict("A" => [["1", "2", "3"], 1])
const d2 = Dict("A" => [["1", "B", "2"], 1], "B" => [["3", "4"], 1])
const d3 = Dict("A" => [["1", "D", "D"], 1], "D" => [["6", "7", "8"], 1])
const d4 = Dict("A" => [["1", "B", "C"], 1], "B" => [["3", "4"], 1],
    "C" => [["5", "B"], 1])

function getvalue!(wheelname, allwheels)
    wheel = allwheels[wheelname]
    s = wheel[1][wheel[2]]
    wheel[2] = mod1(wheel[2] + 1, length(wheel[1]))
    return haskey(allwheels, s) ? getvalue!(s, allwheels) : s
end

function testwheels(wheels, numterms = 20, firstwheel = "A")
    println("\nNumber Wheels:")
    for k in sort(collect(keys(wheels)))
        print("$k: [")
        for s in wheels[k][1]
            print(s, " ")
        end
        println("\b]")
    end
    print("Output: ")
    for _ in 1:numterms
        print(getvalue!(firstwheel, wheels), " ")
    end
    println("...")
end

foreach(testwheels, [d1, d2, d3, d4])
</syntaxhighlight>{{out}}
<pre>
Number Wheels:
A: [1 2 3]
Output: 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Number Wheels:
A: [1 B 2]
B: [3 4]
Output: 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Number Wheels:
A: [1 D D]
D: [6 7 8]
Output: 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Number Wheels:
A: [1 B C]
B: [3 4]
C: [5 B]
Output: 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|Kotlin}}==
{{trans|Java}}
<syntaxhighlight lang="scala">import java.util.Collections
import java.util.stream.IntStream

object WheelController {
    private val IS_NUMBER = "[0-9]".toRegex()
    private const val TWENTY = 20
    private var wheelMap = mutableMapOf<String, WheelModel>()

    private fun advance(wheel: String) {
        val w = wheelMap[wheel]
        if (w!!.list[w.position].matches(IS_NUMBER)) {
            w.printThePosition()
        } else {
            val wheelName = w.list[w.position]
            advance(wheelName)
        }
        w.advanceThePosition()
    }

    private fun run() {
        println(wheelMap)
        IntStream.rangeClosed(1, TWENTY)
            .forEach { advance("A") }
        println()
        wheelMap.clear()
    }

    @JvmStatic
    fun main(args: Array<String>) {
        wheelMap["A"] = WheelModel("1", "2", "3")
        run()
        wheelMap["A"] = WheelModel("1", "B", "2")
        wheelMap["B"] = WheelModel("3", "4")
        run()
        wheelMap["A"] = WheelModel("1", "D", "D")
        wheelMap["D"] = WheelModel("6", "7", "8")
        run()
        wheelMap["A"] = WheelModel("1", "B", "C")
        wheelMap["B"] = WheelModel("3", "4")
        wheelMap["C"] = WheelModel("5", "B")
        run()
    }
}

internal class WheelModel(vararg values: String?) {
    var list = mutableListOf<String>()
    var position: Int
    private var endPosition: Int

    override fun toString(): String {
        return list.toString()
    }

    fun advanceThePosition() {
        if (position == endPosition) {
            position = INITIAL // new beginning
        } else {
            position++ // advance position
        }
    }

    fun printThePosition() {
        print(" ${list[position]}")
    }

    companion object {
        private const val INITIAL = 0
    }

    init {
        Collections.addAll<String>(list, *values)
        position = INITIAL
        endPosition = list.size - 1
    }
}</syntaxhighlight>
{{out}}
<pre>{A=[1, 2, 3]}
 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
{A=[1, B, 2], B=[3, 4]}
 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
{A=[1, D, D], D=[6, 7, 8]}
 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
{A=[1, B, C], B=[3, 4], C=[5, B]}
 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|Maple}}==

<syntaxhighlight lang="maple">
with(ArrayTools):

module Wheel()
 option object;
 local spokes := Array([1,2,3]);
 local currentSpoke := 1;

 export currentValue::static := proc(self::Wheel)
  local valueOut;
  if type(self:-spokes[self:-currentSpoke], integer) then
   valueOut := self:-spokes[self:-currentSpoke]:
  else
   valueOut := currentValue(self:-spokes[self:-currentSpoke]):
  end if:
  rotate(self):
  return valueOut;
 end proc:

 export rotate::static := proc(self::Wheel)
  if self:-currentSpoke = ArrayNumElems(self:-spokes) then self:-currentSpoke := 1:
  else self:-currentSpoke += 1: end if:
 end proc:

 export ModuleApply::static := proc()
  Object(Wheel, _passed);
 end proc:

 export ModuleCopy::static := proc(new::Wheel, proto::Wheel, spo::Array, curr::integer, $)
  new:-spokes := spo:
  new:-currentSpoke := curr:
 end proc:
end module:

A := Wheel(Array([1,2,3]), 1):

seq(currentValue(A), 1..20);

A := Wheel(Array([1,B,2]), 1):
B := Wheel(Array([3,4]), 1):

seq(currentValue(A), 1..20);

A := Wheel(Array([1,d,d]), 1):
d := Wheel(Array([6,7,8]), 1):

seq(currentValue(A), 1..20);

A := Wheel(Array([1,b,C]), 1):
b := Wheel(Array([3,4]), 1):
C := Wheel(Array([5,b]), 1):

seq(currentValue(A), 1..20);
</syntaxhighlight>

{{out}}<pre>
          1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2

          1, 3, 2, 1, 4, 2, 1, 3, 2, 1, 4, 2, 1, 3, 2, 1, 4, 2, 1, 3

          1, 6, 7, 1, 8, 6, 1, 7, 8, 1, 6, 7, 1, 8, 6, 1, 7, 8, 1, 6

          1, 3, 5, 1, 4, 3, 1, 4, 5, 1, 3, 4, 1, 3, 5, 1, 4, 3, 1, 4

</pre>

=={{header|Nim}}==
<syntaxhighlight lang="nim">import strutils, tables

type

  ElemKind = enum eValue, eWheel

  Elem = object
    case kind: ElemKind
    of eValue:
      value: Natural
    of eWheel:
      name: char

  Wheel = ref object
    elems: seq[Elem]
    index: Natural

  Wheels = Table[char, Wheel]

  WheelDescription = tuple[name: char; elems: string]


func initWheels(wheels: openArray[WheelDescription]): Wheels =
  ## Initialize a table of wheels from an array of wheel descriptions.

  for (name, elems) in wheels:
    let wheel = new(Wheel)
    for e in elems.splitWhitespace():
      if e[0].isUpperAscii():
        wheel.elems.add Elem(kind: eWheel, name: e[0])
      else:
        wheel.elems.add Elem(kind: eValue, value: e.parseInt())
    result[name] = wheel


func next(wheels: Wheels; name: char): Natural =
  ## Return the next element from a wheel.

  let wheel = wheels[name]
  let elem = wheel.elems[wheel.index]
  wheel.index = (wheel.index + 1) mod wheel.elems.len
  result = case elem.kind
           of eValue: elem.value
           of eWheel: wheels.next(elem.name)


when isMainModule:

  proc generate(wheelList: openArray[WheelDescription]; count: Positive) =
    ## Create the wheels from their description, then display
    ## the first "count" values generated by wheel 'A'.

    let wheels = wheelList.initWheels()
    for (name, elems) in wheelList:
      echo name, ": ", elems
    echo "generates:"
    for _ in 1..count:
      stdout.write ' ', wheels.next('A')
    echo '\n'


  {'A': "1 2 3"}.generate(20)
  {'A': "1 B 2", 'B': "3 4"}.generate(20)
  {'A': "1 D D", 'D': "6 7 8"}.generate(20)
  {'A': "1 B C", 'B': "3 4", 'C': "5 B"}.generate(20)</syntaxhighlight>

{{out}}
<pre>A: 1 2 3
generates:
 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2

A: 1 B 2
B: 3 4
generates:
 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3

A: 1 D D
D: 6 7 8
generates:
 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6

A: 1 B C
B: 3 4
C: 5 B
generates:
 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|Perl}}==
{{trans|Julia}}
<syntaxhighlight lang="perl">use strict;
use warnings;
use feature 'say';

sub get_next {
    my($w,%wheels) = @_;
    my $wh = \@{$wheels{$w}}; # reference, not a copy
    my $value = $$wh[0][$$wh[1]];
    $$wh[1] = ($$wh[1]+1) % @{$$wh[0]};
    defined $wheels{$value} ? get_next($value,%wheels) : $value;
}

sub spin_wheels {
    my(%wheels) = @_;
    say "$_: " . join ', ', @{${$wheels{$_}}[0]} for sort keys %wheels;
    print get_next('A', %wheels) . ' ' for 1..20; print "\n\n";
}

spin_wheels(%$_) for
(
 {'A' => [['1', '2', '3'], 0]},
 {'A' => [['1', 'B', '2'], 0], 'B' => [['3', '4'], 0]},
 {'A' => [['1', 'D', 'D'], 0], 'D' => [['6', '7', '8'], 0]},
 {'A' => [['1', 'B', 'C'], 0], 'B' => [['3', '4'], 0], 'C' => [['5', 'B'], 0]},
);</syntaxhighlight>
{{out}}
<pre>A: 1, 2, 3
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2

A: 1, B, 2
B: 3, 4
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3

A: 1, D, D
D: 6, 7, 8
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6

A: 1, B, C
B: 3, 4
C: 5, B
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|Phix}}==
<!--<syntaxhighlight lang="phix">(phixonline)-->
 <span style="color: #008080;">with</span> <span style="color: #008080;">javascript_semantics</span>
 <span style="color: #008080;">function</span> <span style="color: #000000;">terms</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">wheels</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">integer</span> <span style="color: #000000;">n</span><span style="color: #0000FF;">)</span>
     <span style="color: #004080;">sequence</span> <span style="color: #000000;">res</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">repeat</span><span style="color: #0000FF;">(</span><span style="color: #008000;">' '</span><span style="color: #0000FF;">,</span><span style="color: #000000;">n</span><span style="color: #0000FF;">),</span>
              <span style="color: #000000;">pos</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">repeat</span><span style="color: #0000FF;">(</span><span style="color: #000000;">2</span><span style="color: #0000FF;">,</span><span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">wheels</span><span style="color: #0000FF;">)),</span>
              <span style="color: #000000;">wvs</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">vslice</span><span style="color: #0000FF;">(</span><span style="color: #000000;">wheels</span><span style="color: #0000FF;">,</span><span style="color: #000000;">1</span><span style="color: #0000FF;">)</span>
     <span style="color: #004080;">integer</span> <span style="color: #000000;">wheel</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">rdx</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span>
     <span style="color: #008080;">while</span> <span style="color: #000000;">rdx</span><span style="color: #0000FF;"><=</span><span style="color: #000000;">n</span> <span style="color: #008080;">do</span>
         <span style="color: #004080;">integer</span> <span style="color: #000000;">p</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">pos</span><span style="color: #0000FF;">[</span><span style="color: #000000;">wheel</span><span style="color: #0000FF;">],</span>
                 <span style="color: #000000;">c</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">wheels</span><span style="color: #0000FF;">[</span><span style="color: #000000;">wheel</span><span style="color: #0000FF;">][</span><span style="color: #000000;">p</span><span style="color: #0000FF;">]</span>
         <span style="color: #000000;">p</span> <span style="color: #0000FF;">=</span> <span style="color: #008080;">iff</span><span style="color: #0000FF;">(</span><span style="color: #000000;">p</span><span style="color: #0000FF;">=</span><span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">wheels</span><span style="color: #0000FF;">[</span><span style="color: #000000;">wheel</span><span style="color: #0000FF;">])?</span><span style="color: #000000;">2</span><span style="color: #0000FF;">:</span><span style="color: #000000;">p</span><span style="color: #0000FF;">+</span><span style="color: #000000;">1</span><span style="color: #0000FF;">)</span>
         <span style="color: #000000;">pos</span><span style="color: #0000FF;">[</span><span style="color: #000000;">wheel</span><span style="color: #0000FF;">]</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">p</span>
         <span style="color: #008080;">if</span> <span style="color: #000000;">c</span><span style="color: #0000FF;">></span><span style="color: #008000;">'9'</span> <span style="color: #008080;">then</span>
             <span style="color: #000000;">wheel</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">find</span><span style="color: #0000FF;">(</span><span style="color: #000000;">c</span><span style="color: #0000FF;">,</span><span style="color: #000000;">wvs</span><span style="color: #0000FF;">)</span>
         <span style="color: #008080;">else</span>
             <span style="color: #000000;">res</span><span style="color: #0000FF;">[</span><span style="color: #000000;">rdx</span><span style="color: #0000FF;">]</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">c</span>
             <span style="color: #000000;">rdx</span> <span style="color: #0000FF;">+=</span> <span style="color: #000000;">1</span>
             <span style="color: #000000;">wheel</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">1</span>
         <span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
     <span style="color: #008080;">end</span> <span style="color: #008080;">while</span>
     <span style="color: #008080;">return</span> <span style="color: #000000;">res</span>
 <span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
  
 <span style="color: #008080;">constant</span> <span style="color: #000000;">wheels</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{{</span><span style="color: #008000;">"A123"</span><span style="color: #0000FF;">},</span>
                    <span style="color: #0000FF;">{</span><span style="color: #008000;">"A1B2"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"B34"</span><span style="color: #0000FF;">},</span>
                    <span style="color: #0000FF;">{</span><span style="color: #008000;">"A1DD"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"D678"</span><span style="color: #0000FF;">},</span>
                    <span style="color: #0000FF;">{</span><span style="color: #008000;">"A1BC"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"B34"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"C5B"</span><span style="color: #0000FF;">}}</span>
  
 <span style="color: #008080;">for</span> <span style="color: #000000;">i</span><span style="color: #0000FF;">=</span><span style="color: #000000;">1</span> <span style="color: #008080;">to</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">wheels</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">do</span>
     <span style="color: #0000FF;">?</span><span style="color: #000000;">terms</span><span style="color: #0000FF;">(</span><span style="color: #000000;">wheels</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">],</span><span style="color: #000000;">20</span><span style="color: #0000FF;">)</span>
 <span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
<!--</syntaxhighlight>-->
{{out}}
<pre>
"12312312312312312312"
"13214213214213214213"
"16718617816718617816"
"13514314513413514314"
</pre>

=={{header|Python}}==
===Python: Original class and generator based===
<syntaxhighlight lang="python">from itertools import islice

class INW():
    """
    Intersecting Number Wheels
    represented as a dict mapping
    name to tuple of values.
    """

    def __init__(self, **wheels):
        self._wheels = wheels
        self.isect = {name: self._wstate(name, wheel) 
                      for name, wheel in wheels.items()}
    
    def _wstate(self, name, wheel):
        "Wheel state holder"
        assert all(val in self._wheels for val in wheel if type(val) == str), \
               f"ERROR: Interconnected wheel not found in {name}: {wheel}"
        pos = 0
        ln = len(wheel)
        while True:
            nxt, pos = wheel[pos % ln], pos + 1
            yield next(self.isect[nxt]) if type(nxt) == str else nxt
                
    def __iter__(self):
        base_wheel_name = next(self.isect.__iter__())
        yield from self.isect[base_wheel_name]
        
    def __repr__(self):
        return f"{self.__class__.__name__}({self._wheels})"
    
    def __str__(self):
        txt = "Intersecting Number Wheel group:"
        for name, wheel in self._wheels.items():
            txt += f"\n  {name+':':4}" + ' '.join(str(v) for v in wheel)
        return txt

def first(iter, n):
    "Pretty print first few terms"
    return ' '.join(f"{nxt}" for nxt in islice(iter, n))

if __name__ == '__main__':
    for group in[
      {'A': (1, 2, 3)},
      {'A': (1, 'B', 2),
       'B': (3, 4)},
      {'A': (1, 'D', 'D'),
       'D': (6, 7, 8)},
      {'A': (1, 'B', 'C'),
       'B': (3, 4),
       'C': (5, 'B')}, # 135143145...
     ]:
        w = INW(**group)
        print(f"{w}\n  Generates:\n    {first(w, 20)} ...\n")</syntaxhighlight>

{{out}}
<pre>Intersecting Number Wheel group:
  A:  1 2 3
  Generates:
    1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  A:  1 B 2
  B:  3 4
  Generates:
    1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  A:  1 D D
  D:  6 7 8
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  A:  1 B C
  B:  3 4
  C:  5 B
  Generates:
    1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...</pre>

===Python: Simplified procedural===
<syntaxhighlight lang="python">def nextfrom(w, name):
    while True:
        nxt, w[name] = w[name][0], w[name][1:] + w[name][:1]
        if '0' <= nxt[0] <= '9':
            return nxt
        name = nxt
            
if __name__ == '__main__':
    for group in '''
A: 1 2 3
A: 1 B 2; B: 3 4
A: 1 D D; D: 6 7 8
A: 1 B C; B: 3 4; C: 5 B'''.strip().split('\n'):
        print(f"Intersecting Number Wheel group:\n  {group}")
        wheel, first = {}, None
        for w in group.strip().split(';'):
            name, *values = w.strip().split()
            wheel[name[:-1]] = values
            first = name[:-1] if first is None else first
        gen = ' '.join(nextfrom(wheel, first) for i in range(20))
        print(f"  Generates:\n    {gen} ...\n")</syntaxhighlight>

{{out}}
<pre>Intersecting Number Wheel group:
  A: 1 2 3
  Generates:
    1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  A: 1 B 2; B: 3 4
  Generates:
    1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  A: 1 D D; D: 6 7 8
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  A: 1 B C; B: 3 4; C: 5 B
  Generates:
    1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...</pre>

<br>
;And Again:
This time the <code>nextfromr</code> function is recursive and it will only work for single character names and numbers due to character string rotation being used.<br>
Input is just a list of Python dicts, and depends on c-python dicts being odered by key insertion order.

<syntaxhighlight lang="python">def nextfromr(w, name):
    nxt, w[name] = w[name][0], w[name][1:] + w[name][:1]
    return nxt if '0' <= nxt[0] <= '9' else nextfromr(w, nxt)
            
if __name__ == '__main__':
    for group in [{'A': '123'},
                  {'A': '1B2', 'B': '34'},
                  {'A': '1DD', 'D': '678'},
                  {'A': '1BC', 'B': '34', 'C': '5B'},]:
        print(f"Intersecting Number Wheel group:\n  {group}")
        first = next(group.__iter__())
        gen = ' '.join(nextfromr(group, first) for i in range(20))
        print(f"  Generates:\n   {gen} ...\n")</syntaxhighlight>

{{out}}
<pre>Intersecting Number Wheel group:
  {'A': '123'}
  Generates:
   1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  {'A': '1B2', 'B': '34'}
  Generates:
   1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  {'A': '1DD', 'D': '678'}
  Generates:
   1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  {'A': '1BC', 'B': '34', 'C': '5B'}
  Generates:
   1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...</pre>

===Python: Functional composition===
Defining a unit rotation of the wheel-set as a recursive descent, and taking
a map-accumulation of this recursion 
over a list of specific length and arbitrary content.
{{Trans|Haskell}}
{{Works with|Python|3.7}}
<syntaxhighlight lang="python">'''Intersecting number wheels'''

from itertools import cycle, islice
from functools import reduce


# clockWorkTick :: Dict -> (Dict, Char)
def clockWorkTick(wheelMap):
    '''The new state of the wheels, tupled with a
       digit found by recursive descent from a single
       click of the first wheel.'''
    def click(wheels):
        def go(wheelName):
            wheel = wheels.get(wheelName, ['?'])
            v = wheel[0]
            return (Tuple if v.isdigit() or '?' == v else click)(
                insertDict(wheelName)(leftRotate(wheel))(wheels)
            )(v)
        return go
    return click(wheelMap)('A')


# leftRotate :: [a] -> String
def leftRotate(xs):
    ''' A string shifted cyclically towards
        the left by one position.
    '''
    return ''.join(islice(cycle(xs), 1, 1 + len(xs)))


# ------------------------- TEST -------------------------
# main :: IO ()
def main():
    '''First twenty values from each set of test wheels.'''

    wheelMaps = [dict(kvs) for kvs in [
        [('A', "123")],
        [('A', "1B2"), ('B', "34")],
        [('A', "1DD"), ('D', "678")],
        [('A', "1BC"), ('B', "34"), ('C', "5B")]
    ]]
    print('New state of wheel sets, after 20 clicks of each:\n')
    for wheels, series in [
            mapAccumL(compose(const)(clockWorkTick))(
                dct
            )(' ' * 20) for dct in wheelMaps
    ]:
        print((wheels, ''.join(series)))

    print('\nInital states:')
    for x in wheelMaps:
        print(x)


# ----------------------- GENERIC ------------------------

# Tuple (,) :: a -> b -> (a, b)
def Tuple(x):
    '''Constructor for a pair of values,
       possibly of two different types.
    '''
    return lambda y: (
        x + (y,)
    ) if isinstance(x, tuple) else (x, y)


# compose (<<<) :: (b -> c) -> (a -> b) -> a -> c
def compose(g):
    '''Right to left function composition.'''
    return lambda f: lambda x: g(f(x))


# const :: a -> b -> a
def const(k):
    '''The latter of two arguments,
       with the first discarded.
    '''
    return lambda _: k


# insertDict :: String -> a -> Dict -> Dict
def insertDict(k):
    '''A new dictionary updated with a (k, v) pair.'''
    def go(v, dct):
        return dict(dct, **{k: v})
    return lambda v: lambda dct: go(v, dct)


# mapAccumL :: (acc -> x -> (acc, y)) -> acc -> [x] -> (acc, [y])
def mapAccumL(f):
    '''A tuple of an accumulation and a map
       with accumulation from left to right.
    '''
    def nxt(a, x):
        tpl = f(a[0])(x)
        return tpl[0], a[1] + [tpl[1]]

    def go(acc):
        def g(xs):
            return reduce(nxt, xs, (acc, []))
        return g
    return go


# MAIN ---
if __name__ == '__main__':
    main()</syntaxhighlight>
{{Out}}
<pre>New state of wheel sets, after 20 clicks of each:

({'A': '312'}, '12312312312312312312')
({'A': '21B', 'B': '43'}, '13214213214213214213')
({'A': 'D1D', 'D': '786'}, '16718617816718617816')
({'A': 'C1B', 'B': '34', 'C': '5B'}, '13514314513413514314')

Inital states:
{'A': '123'}
{'A': '1B2', 'B': '34'}
{'A': '1DD', 'D': '678'}
{'A': '1BC', 'B': '34', 'C': '5B'}</pre>

=={{header|Quackery}}==

As the contents of a wheel (e.g. <code>[ 1 B 2 ]</code>) is just Quackery code, wheels can be extended in interesting ways. 

They could, for example, contain a nest that randomly selects a wheel to advance; <code>[ 1 [ 2 random table [ B C ] ] 2 ]</code> would do the same as <code>[ 1 B 2 ]</code>, except that on the second click of the wheel, instead of always advancing wheel <code>B</code>, <code>[ 2 random table [ B C ] ]</code> would be evaluated, causing either wheel <code>B</code> or wheel <code>C</code> to advance arbitrarily.

<syntaxhighlight lang="quackery">  [ ]this[ ]done[
    dup take behead 
    dup dip 
      [ nested join 
        swap put ]
    do ]                      is wheel    ( --> n )

  [ ]'[ 
    ]'[ nested 
    ' [ wheel ] 
    swap join
    swap replace ]            is newwheel ( -->   )
    
  forward is A  forward is B  forward is C  
  forward is D  ( and so on, as required )
 
  [ wheel [ 1 2 3 ] ]   resolves A        ( --> n )

  [ wheel [ 3 4 ] ]     resolves B        ( --> n )

  [ wheel [ 5 B ] ]     resolves C        ( --> n )

  [ wheel [ 6 7 8 ] ]   resolves D        ( --> n )


  20 times [ A echo sp ] cr 
 
  newwheel A [ 1 B 2 ] 
  20 times [ A echo sp ] cr 
 
  newwheel A [ 1 D D ] 
  20 times [ A echo sp ] cr 
 
  newwheel A [ 1 B C ]
  newwheel B [ 3 4 ]        ( As B has been used already )
                            ( it's state may be [ 4 3 ]. )
                            ( So we reset it to [ 3 4 ]. )

  20 times [ A echo sp ] cr</syntaxhighlight>

{{out}}

<pre>1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 </pre>

=={{header|Raku}}==
(formerly Perl 6)
A succinct Raku example using a few additional language features. Wheels are implemented as infinite repeating sequences, allowing a single iterator to keep track of the current position. This means the code contains no position tracking whatsoever.
<syntaxhighlight lang="raku" line>
#| advance rotates a named wheel $n by consuming an item from an infinite sequence. It is called
#| from within a gather block and so can use take in order to construct an infinite, lazy sequence
#| of result values
sub advance($g, $n) {
	given $g{$n}.pull-one {
		when /\d/ { take $_ }
		default   { samewith $g, $_ } # samewith re-calls this function with new parameters
	}
}

#| Input groups are a hash containing each wheel name as the key, and a list of values constructed
#| using <> to split on whitespace. They are transformed using xx * to repeat the list infinitely.
#| We then retrieve the underlying iterator in order for wheel position to be persistent. Each group
#| is then aggregated into a lazy output sequence using an infinite loop inside a gather block.
[
	{A => <1 2 3>},
	{A => <1 B 2>, B => <3 4>},
	{A => <1 D D>, D => <6 7 8>},
	{A => <1 B C>, B => <3 4>, C => <5 B>},
]
	#| %() converts a list of pairs produced by map into a hash. $^k and $^v are implicit variables.
	#| They are processed in alphabetical order and make the block arity 2, called with two vars.
	#| .kv gets the list of wheel names and wheel values from the input entry
	==> map({ %(.kv.map: { $^k => (|$^v xx *).iterator }) })
	#| gather constructs a lazy sequence, in which we infinitely loop advancing wheel A
	==> map({ gather { loop { advance $_, 'A' }} })
	#| state variables are only initialised once, and are kept between invocations.
	==> map({ state $i = 1; say "Group {$i++}, First 20 values: $_[^20]" })
</syntaxhighlight>{{Output}}
<pre>
Group 1, First 20 values: 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
Group 2, First 20 values: 1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
Group 3, First 20 values: 1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
Group 4, First 20 values: 1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4
</pre>

=={{header|REXX}}==
Quite a bit of the REXX code deals with detecting of errors &nbsp; (and issuing error messages) &nbsp; in the specification and
<br>generation/construction of the wheel sets.

This REXX program uses &nbsp; ''numbers'' &nbsp; (any form), &nbsp; not &nbsp; ''digits'' &nbsp; (for the values on the wheels).
<syntaxhighlight lang="rexx">/*REXX program  expresses numbers  from  intersecting number wheels  (or wheel sets).   */
@.=                                              /*initialize array to hold the wheels. */
parse arg lim @.1                                /*obtain optional arguments from the CL*/
if lim='' | lim=","  then lim= 20                /*Not specified?  Then use the default.*/
if @.1='' | @.1=","  then do;  @.1= ' A:  1 2 3 '
                               @.2= ' A:  1 B 2,    B:  3 4 '
                               @.3= ' A:  1 D D,    D:  6 7 8 '
                               @.4= ' A:  1 B C,    B:  3 4,    C:  5 B '
                          end
       do i=1  while @.i\='';  call run          /*construct wheel set and "execute" it.*/
       end   /*i*/
exit 0                                           /*stick a fork in it,  we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
error: procedure; say;  say;    say '***error***'   arg(1);          say;   say;   exit 12
isLet: procedure; parse arg y;  return datatype(y, 'M') & length(y)==1   /*is a letter? */
isNum: procedure; parse arg y;  return datatype(y, 'N')                  /*is a number? */
/*──────────────────────────────────────────────────────────────────────────────────────*/
run: @wn= 'wheel name';     first=;      @noColon= "wheel name not followed by a colon:"
     @gn= 'gear name' ;     gear.=;      say copies("═", 79)
     say 'building wheel group for: '    @.i;    wheels= space(@.i);        upper wheels
        do #=1  while wheels\='';  parse var wheels  w gears "," wheels;    L= length(w)
        if L==2  then do;  !.#= left(w, 1)       /*obtain the one─character gear name.  */
                           if right(w, 1)\==':'  then call error @noColon  w
                           if \isLet(!.#)        then call error @wn "not a letter:"  w
                      end
                 else call error "first token isn't a"   @wn':'     w
        if #==1  then first= !.1                 /*Is this is the 1st wheel set?  Use it*/
        if first==''  then call error "no wheel name was specified."
        n= !.#                                   /*obtain the name of the 1st wheel set.*/
        gear.n.0= 1                              /*initialize default 1st gear position.*/
        say '   setting gear.name:'     n     "    gears=" gears
           do g=1  for words(gears);         _= word(gears, g)
           if isNum(_)  |  isLet(_)  then do;  gear.n.g= _;  iterate;  end
           call error  @gn  "isn't a number or a gear name:"  _
           end   /*g*/
        end      /*#*/
    say;                  say center(' running the wheel named '  first" ", 79, '─');   $=
        do dummy=0  by 0  until words($)==lim;           n= first
        z= gear.n.0;               x= gear.n.z;          z= z + 1
        gear.n.0= z;      if gear.n.z==''  then gear.n.0= 1
        if isNum(x)  then do;     $= $ x;    iterate;    end   /*found a number, use it.*/
        xx= x                                    /*different gear, keep switching 'til X*/
           do forever;            nn= xx
           if gear.nn.0==''  then call error "a gear is using an unknown gear name:"  x
           zz= gear.nn.0;         xx= gear.nn.zz
           zz= zz + 1;   gear.nn.0= zz;   if gear.nn.zz==''  then gear.nn.0= 1
           if isNum(xx)  then do;  $= $ xx;  iterate dummy;  end
           end   /*forever*/                     /* [↑]  found a number,  now use FIRST.*/
        end      /*dummy*/                       /*"DUMMY"  is needed for the  ITERATE. */
     say '('lim "results): "  strip($);      say;          say;          return</syntaxhighlight>
{{out|output|text=&nbsp; when using the default inputs:}}
<pre>
═══════════════════════════════════════════════════════════════════════════════
building wheel group for:   A:  1 2 3
   setting gear.name: A     gears= 1 2 3

───────────────────────── running the wheel named  A ──────────────────────────
(20 results):  1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2


═══════════════════════════════════════════════════════════════════════════════
building wheel group for:   A:  1 B 2,    B:  3 4
   setting gear.name: A     gears= 1 B 2
   setting gear.name: B     gears= 3 4

───────────────────────── running the wheel named  A ──────────────────────────
(20 results):  1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3


═══════════════════════════════════════════════════════════════════════════════
building wheel group for:   A:  1 D D,    D:  6 7 8
   setting gear.name: A     gears= 1 D D
   setting gear.name: D     gears= 6 7 8

───────────────────────── running the wheel named  A ──────────────────────────
(20 results):  1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6


═══════════════════════════════════════════════════════════════════════════════
building wheel group for:   A:  1 B C,    B:  3 4,    C:  5 B
   setting gear.name: A     gears= 1 B C
   setting gear.name: B     gears= 3 4
   setting gear.name: C     gears= 5 B

───────────────────────── running the wheel named  A ──────────────────────────
(20 results):  1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4
</pre>

=={{header|Ruby}}==
<syntaxhighlight lang="ruby">groups = [{A: [1, 2, 3]},
          {A: [1, :B, 2], B: [3, 4]},
          {A: [1, :D, :D], D: [6, 7, 8]},
          {A: [1, :B, :C], B: [3, 4], C: [5, :B]} ]

groups.each do |group|
  p group
  wheels = group.transform_values(&:cycle) 
  res = 20.times.map do
    el = wheels[:A].next
    el = wheels[el].next until el.is_a?(Integer)
    el
  end
  puts res.join(" "),""
end
</syntaxhighlight>
{{out}}
<pre>{:A=>[1, 2, 3]}
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2

{:A=>[1, :B, 2], :B=>[3, 4]}
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3

{:A=>[1, :D, :D], :D=>[6, 7, 8]}
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6

{:A=>[1, :B, :C], :B=>[3, 4], :C=>[5, :B]}
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4
</pre>
=={{header|Visual Basic .NET}}==
{{trans|C#}}
<syntaxhighlight lang="vbnet">Imports System.Runtime.CompilerServices

Module Module1

    <Extension()>
    Iterator Function Loopy(Of T)(seq As IEnumerable(Of T)) As IEnumerable(Of T)
        While True
            For Each element In seq
                Yield element
            Next
        End While
    End Function

    Iterator Function TurnWheels(ParamArray wheels As (name As Char, values As String)()) As IEnumerable(Of Char)
        Dim data = wheels.ToDictionary(Function(wheel) wheel.name, Function(wheel) wheel.values.Loopy.GetEnumerator)
        Dim primary = data(wheels(0).name)

        Dim Turn As Func(Of IEnumerator(Of Char), Char) = Function(sequence As IEnumerator(Of Char))
                                                              sequence.MoveNext()
                                                              Dim c = sequence.Current
                                                              Return If(Char.IsDigit(c), c, Turn(data(c)))
                                                          End Function

        While True
            Yield Turn(primary)
        End While
    End Function

    <Extension()>
    Sub Print(sequence As IEnumerable(Of Char))
        Console.WriteLine(String.Join(" ", sequence))
    End Sub

    Sub Main()
        TurnWheels(("A", "123")).Take(20).Print()
        TurnWheels(("A", "1B2"), ("B", "34")).Take(20).Print()
        TurnWheels(("A", "1DD"), ("D", "678")).Take(20).Print()
        TurnWheels(("A", "1BC"), ("B", "34"), ("C", "5B")).Take(20).Print()
    End Sub

End Module</syntaxhighlight>
{{out}}
<pre>1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4</pre>

=={{header|Wren}}==
{{trans|Go}}
{{libheader|Wren-dynamic}}
{{libheader|Wren-sort}}
{{libheader|Wren-fmt}}
<syntaxhighlight lang="wren">import "./dynamic" for Struct
import "./sort" for Sort
import "./fmt" for Fmt

var Wheel = Struct.create("Wheel", ["next", "values"])

var generate = Fn.new { |wheels, start, maxCount|
    var count = 0
    var w = wheels[start]
    while (true) {
        var s = w.values[w.next]
        var v = Num.fromString(s)
        w.next = (w.next + 1) % w.values.count
        wheels[start] = w
        if (v) {
            System.write("%(v) ")
            count = count + 1
            if (count == maxCount) {
                System.print("...\n")
                return
            }
        } else {
            while (true) {
                var w2 = wheels[s]
                var ss = s
                s = w2.values[w2.next]
                w2.next = (w2.next + 1) % w2.values.count
                wheels[ss] = w2
                v = Num.fromString(s)
                if (v) {
                    System.write("%(v) ")
                    count = count + 1
                    if (count == maxCount) {
                        System.print("...\n")
                        return
                    }
                    break
                }
            }
        }
    }
}

var printWheels = Fn.new { |wheels|
    var names = []
    for (name in wheels.keys) names.add(name)
    Sort.quick(names)
    System.print("Intersecting Number Wheel group:")
    for (name in names) {
        Fmt.print("  $s: $n", name, wheels[name].values)
    }
    System.write("  Generates:\n    ")
}

var wheelMaps = [
    {
        "A": Wheel.new(0, ["1", "2", "3"])
    },
    {
        "A": Wheel.new(0, ["1", "B", "2"]),
        "B": Wheel.new(0, ["3", "4"])
    },
    {
        "A": Wheel.new(0, ["1", "D", "D"]),
        "D": Wheel.new(0, ["6", "7", "8"])
    },
    {
        "A": Wheel.new(0, ["1", "B", "C"]),
        "B": Wheel.new(0, ["3", "4"]),
        "C": Wheel.new(0, ["5", "B"])
    }
]
for (wheels in wheelMaps) {
    printWheels.call(wheels)
    generate.call(wheels, "A", 20)
}</syntaxhighlight>

{{out}}
<pre>
Intersecting Number Wheel group:
  A: [1, 2, 3]
  Generates:
    1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ...

Intersecting Number Wheel group:
  A: [1, B, 2]
  B: [3, 4]
  Generates:
    1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3 ...

Intersecting Number Wheel group:
  A: [1, D, D]
  D: [6, 7, 8]
  Generates:
    1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6 ...

Intersecting Number Wheel group:
  A: [1, B, C]
  B: [3, 4]
  C: [5, B]
  Generates:
    1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4 ...
</pre>

=={{header|zkl}}==
<syntaxhighlight lang="zkl">fcn intersectingNumberWheelsW(wheels){ // ("A":(a,b,"C"), "C":(d,e) ...)
   ws:=wheels.pump(Dictionary(),fcn([(k,v)]){ return(k,Walker.cycle(v)) });  // new Dictionary
   Walker.zero().tweak(fcn(w,wheels){
      while(1){
	 w=wheels[w].next();	// increment wheel w
	 if(Int.isType(w)) return(w);
      }      
   }.fp("A",ws))	// assume wheel A exists and is always first
}</syntaxhighlight>
<syntaxhighlight lang="zkl">wheelSets:=T( Dictionary("A",T(1,2,3)),
	      Dictionary("A",T(1,"B",2),   "B",T(3,4)),
	      Dictionary("A",T(1,"D","D"), "D",T(6,7,8)),
	      Dictionary("A",T(1,"B","C"), "C",T(5,"B"),  "B",T(3,4)) );
foreach ws in (wheelSets){
   println("Wheel set:");
   ws.pump(String,fcn([(k,v)]){ "  %s: %s\n".fmt(k,v.concat(" ")) }).print();
   println("-->",intersectingNumberWheelsW(ws).walk(20).concat(" "));
}</syntaxhighlight>
{{out}}
<pre>
Wheel set:
  A: 1 2 3
-->1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2
Wheel set:
  A: 1 B 2
  B: 3 4
-->1 3 2 1 4 2 1 3 2 1 4 2 1 3 2 1 4 2 1 3
Wheel set:
  A: 1 D D
  D: 6 7 8
-->1 6 7 1 8 6 1 7 8 1 6 7 1 8 6 1 7 8 1 6
Wheel set:
  A: 1 B C
  C: 5 B
  B: 3 4
-->1 3 5 1 4 3 1 4 5 1 3 4 1 3 5 1 4 3 1 4
</pre>