Empty directory: Difference between revisions
(added Factor) |
m (→{{header|Wren}}: Changed to Wren S/H) |
||
(39 intermediate revisions by 23 users not shown) | |||
Line 4:
An empty directory contains no files nor subdirectories.
With [[Unix]] or [[Windows]] systems, every directory contains an entry for “<code>.</code>” and almost every directory contains “<code>..</code>” (except for a root directory); an empty directory contains no other entries.
=={{header|11l}}==
<syntaxhighlight lang="11l">I fs:list_dir(input()).empty
print(‘empty’)
E
print(‘not empty’)</syntaxhighlight>
=={{header|8086 Assembly}}==
{{trans|MS-DOS}}
<syntaxhighlight lang="asm">; this routine attempts to remove the directory and returns an error code if it cannot.
mov ax,seg dirname ;load into AX the segment where dirname is stored.
mov ds,ax ;load the segment register DS with the segment of dirname
mov dx,offset dirname ;load into DX the offset of dirname
mov ah,39h ;0x39 is the interrupt code for remove directory
int 21h ;sets carry if error is encountered. error code will be in AX.
;If carry is clear the remove was successful
jc error
mov ah,4Ch ;return function
mov al,0 ;required return code
int 21h ;return to DOS
error: ;put your error handler here
mov ah,4Ch ;return function
mov al,0 ;required return code
int 21h ;return to DOS
dirname db "GAMES",0</syntaxhighlight>
=={{header|Ada}}==
<
with Ada.Directories;
procedure EmptyDir is
Line 29 ⟶ 62:
Put_Line (Empty ("./emptydir.adb"));
Put_Line (Empty ("./foobar"));
end EmptyDir;</
{{out}}
<pre>Not empty
Line 40 ⟶ 73:
This uses the "argc", "argv", "file is directory" and "get directory" procedures specific to Algol 68 G.
<br>Note the Algol 68 G interpreter processes the command line parameters before "-" so this example expects the directory names to follow "-".
<
PROC is empty directory = ( STRING directory )BOOL:
IF NOT file is directory( directory )
Line 71 ⟶ 104:
print( ( argv( i ), " is ", IF is empty directory( argv( i ) ) THEN "empty" ELSE "not empty" FI, newline ) )
FI
OD</
{{out}}
<pre>
Line 79 ⟶ 112:
\zz is empty
</pre>
=={{header|Arturo}}==
<syntaxhighlight lang="rebol">emptyDir?: function [folder]-> empty? list folder
print emptyDir? "."</syntaxhighlight>
{{out}}
<pre>false</pre>
=={{header|AutoHotkey}}==
<
isDir_empty(p) {
Line 87 ⟶ 130:
return 0
return 1
}</
{{out}}
<pre>false</pre>
=={{header|AWK}}==
<syntaxhighlight lang="awk">
# syntax: GAWK -f EMPTY_DIRECTORY.AWK
BEGIN {
Line 129 ⟶ 173:
return(msg)
}
</syntaxhighlight>
{{out}}
<pre>
Line 138 ⟶ 182:
</pre>
=={{header|
==={{header|BaCon}}===
<syntaxhighlight lang="basic">FUNCTION check$(dir$)
IF FILEEXISTS(dir$) THEN
RETURN IIF$(LEN(WALK$(dir$, 127, ".+", FALSE)), " is NOT empty.", " is empty." )
ELSE
RETURN " doesn't exist."
ENDIF
ENDFUNCTION
dir$ = "bla"
PRINT "Directory '", dir$, "'", check$(dir$)
dir$ = "/mnt"
PRINT "Directory '", dir$, "'", check$(dir$)
dir$ = "."
PRINT "Directory '", dir$, "'", check$(dir$)</syntaxhighlight>
{{out}}
<pre>Directory 'bla' doesn't exist.
=={{header|Batch File}}==
Line 170 ⟶ 214:
*2 - input directory does not exist.
*3 - input not found.
<
if "%~1"=="" exit /b 3
set "samp_path=%~1"
Line 199 ⟶ 243:
:folder_not_found
echo Folder not found.
exit /b 2</
{{Out|Sample Session}}
(Saved the Batch File as IsEmpty.Bat in C:\)
Line 231 ⟶ 275:
=={{header|BBC BASIC}}==
{{works with|BBC BASIC for Windows}}
<
IF FNisdirectoryempty("C:\temp") PRINT "C:\temp is empty" ELSE PRINT "C:\temp is not empty"
END
Line 247 ⟶ 291:
UNTIL res% == 0
SYS "FindClose", sh%
= (res% == 0)</
=={{header|C}}==
<
#include <dirent.h>
#include <string.h>
Line 289 ⟶ 333:
return 0;
}</
% mkdir stuff; ./a.out /usr/ ./stuff /etc/passwd
/usr/: not empty
Line 296 ⟶ 340:
</pre>
=={{header|C
<syntaxhighlight lang="csharp">using System;
using System.IO;
Line 337 ⟶ 360:
}
}
</syntaxhighlight>
Running it:<pre>
Assume c:\temp exists and is not empty, c:\temp\empty exists and is empty
Line 345 ⟶ 368:
'c:\temp\empty' is empty
</pre>
=={{header|C++}}==
{{libheader|Boost}}
<syntaxhighlight lang="cpp">
#include <iostream>
#include <boost/filesystem.hpp>
using namespace boost::filesystem;
int main(int argc, char *argv[])
{
for (int i = 1; i < argc; ++i) {
path p(argv[i]);
if (exists(p) && is_directory(p))
std::cout << "'" << argv[i] << "' is" << (!is_empty(p) ? " not" : "") << " empty\n";
else
std::cout << "dir '" << argv[i] << "' could not be found\n";
}
}
</syntaxhighlight>
=={{header|Clojure}}==
<
(defn empty-dir? [path]
(let [file (io/file path)]
(assert (.exists file))
(assert (.isDirectory file))
(-> file .list empty?))) ; .list ignores "." and ".."</
=={{header|CoffeeScript}}==
<
fs = require 'fs'
Line 364 ⟶ 407:
fns = fs.readdirSync dir
fns.length == 0
</syntaxhighlight>
=={{header|Common Lisp}}==
Will also return <code>T</code> if <code>path</code> doesn't exist.
<
(defun empty-directory-p (path)
(and (null (directory (concatenate 'string path "/*")))
(null (directory (concatenate 'string path "/*/")))))
</syntaxhighlight>
=={{header|D}}==
<
void main() {
Line 387 ⟶ 430:
throw new Exception("dir not found: " ~ dirname);
return dirEntries(dirname, SpanMode.shallow).empty;
}</
<pre>somedir is empty: false</pre>
=={{header|Delphi}}==
{{libheader| System.SysUtils}}
{{libheader| System.IOUtils}}
{{Trans|C#}}
<syntaxhighlight lang="delphi">
program Empty_directory;
{$APPTYPE CONSOLE}
uses
System.SysUtils,
System.IOUtils;
function IsDirectoryEmpty(dir: string): Boolean;
var
count: Integer;
begin
count := Length(TDirectory.GetFiles(dir)) + Length(TDirectory.GetDirectories(dir));
Result := count = 0;
end;
var
i: Integer;
const
CHECK: array[Boolean] of string = (' is not', ' is');
begin
if ParamCount > 0 then
for i := 1 to ParamCount do
Writeln(ParamStr(i), CHECK[IsDirectoryEmpty(ParamStr(i))], ' empty');
Readln;
end.</syntaxhighlight>
{{out}}
The same of c#.
=={{header|Elixir}}==
<
IO.puts File.dir?(path) and Enum.empty?( File.ls!(path) )</
=={{header|Erlang}}==
Line 407 ⟶ 484:
{ok,[]}
</pre>
=={{header|F_Sharp|F#}}==
<syntaxhighlight lang="fsharp">open System.IO
let isEmptyDirectory x = (Directory.GetFiles x).Length = 0 && (Directory.GetDirectories x).Length = 0</syntaxhighlight>
=={{header|Factor}}==
<
: empty-directory? ( path -- ? ) directory-entries empty? ;</
=={{header|FreeBASIC}}==
<
#Include "dir.bi"
Line 455 ⟶ 536:
Print
Print "Press any key to quit"
Sleep</
{{out}}
Line 462 ⟶ 543:
</pre>
=={{header|
<syntaxhighlight lang="futurebasic">
include "NSLog.incl"
local fn DirectoryContents( url as CFURLRef ) as CFArrayRef
CFArrayRef contents = fn FileManagerContentsOfDirectoryAtURL( url, NULL, NSDirectoryEnumerationSkipsHiddenFiles )
if ( contents == NULL )
NSLog(@"Unable to get contents of directory \"%@\".",fn URLLastPathComponent(url))
end if
end fn = fn ArrayValueForKey( contents, @"lastPathComponent" )
void local fn DoIt
CFURLRef dirURL, fileURL
CFArrayRef contents
dirURL = fn URLFileURLWithPath( fn StringByExpandingTildeInPath( @"~/Desktop/docs" ) )
if ( fn FileManagerCreateDirectoryAtURL( dirURL, YES, NULL ) )
contents = fn DirectoryContents( dirURL )
if ( contents )
NSLog(@"Directory \"docs\" \b")
if ( len(contents) )
NSLog(@"contents:\n%@",contents)
else
NSLog(@"is empty.")
end if
NSLog(@"")
fileURL = fn URLFileURLWithPath( fn StringByExpandingTildeInPath( @"~/Desktop/docs/output.txt" ) )
if (fn FileManagerCreateFileAtURL( fileURL, NULL, NULL ) )
contents = fn DirectoryContents( dirURL )
NSLog(@"Directory \"docs\" \b")
if ( len(contents) )
NSLog(@"contents:\n%@",contents)
else
NSLog(@"is empty.")
end if
end if
end if
end if
end fn
fn DoIt
HandleEvents
</syntaxhighlight>
{{out}}
<pre>
Directory "docs" is empty.
Directory "docs" contents:
(
"output.txt"
)
</pre>
=={{header|Gambas}}==
<
Dim sFolder As String = User.home &/ "Rosetta"
Dim sDir As String[] = Dir(sFolder)
Line 478 ⟶ 614:
Print sOutput
End</
Output:
<pre>
Line 485 ⟶ 621:
=={{header|Go}}==
<
import (
Line 512 ⟶ 648:
return len(entries) == 0, nil
}
</syntaxhighlight>
=={{header|Groovy}}==
Solution:
<
def dir = new File(dirName)
dir.exists() && dir.directory && (dir.list() as List).empty
}</
Test:
<
def random = new Random()
def subDirName = "dir${random.nextInt(100000)}"
Line 529 ⟶ 666:
assert ! isDirEmpty('.')
assert isDirEmpty(subDirName)</
=={{header|Haskell}}==
<
import System.Environment (getArgs)
Line 540 ⟶ 677:
f False = "Directory is not empty"
main = getArgs >>= isEmpty . (!! 0) >>= putStrLn</
Test:
<syntaxhighlight lang="text">$ mkdir 1
$ ./isempty 1
Directory is empty
$ ./isempty /usr/
Directory is not empty</
==Icon and {{header|Unicon}}==
This example uses Unicon extensions. The 'empty' sub-directory was manually setup for this test.
<
every dir := "." | "./empty" do
write(dir, if isdirempty(dir) then " is empty" else " is not empty")
Line 565 ⟶ 702:
}
else stop(s," is not a directory or will not open")
end</
{{out}}
Line 573 ⟶ 710:
=={{header|J}}==
<
empty_dir=: 0 = '/*' #@dir@,~ ]</
In other words, list the contents of the directory, count how many items are in it, and test if that count was zero.
Line 582 ⟶ 719:
Example, under windows, create some directories using cygwin:
<
$ touch /tmp/a/...
$ mkdir /tmp/b
$ mkdir /tmp/c
$ mkdir /tmp/c/d</
Then, testing these directories, in J:
<
0
empty_dir 'c:/cygwin/tmp/b'
1
empty_dir 'c:/cygwin/tmp/c'
0</
=={{header|Java}}==
{{works with|Java|7+}}
This method does not check that the path given is actually a directory. If a path to a normal file is given, it will throw a <code>NullPointerException</code>. <code>File.listFiles()</code> does not count the "." and ".." entries.
<
//... other class code here
public static boolean isEmptyDir(String dirName){
return Paths.get(dirName).toFile().listFiles().length == 0;
}</
=={{header|JavaScript}}==
The ECMAScript standard itself defines no IO interface – the following example makes use of the Node.js file IO library.
{{Works with|Node.js}}
<syntaxhighlight lang="javascript">// Node.js v14.15.4
const { readdirSync } = require("fs");
const emptydir = (path) => readdirSync(path).length == 0;
// tests, run like node emptydir.js [directories]
for (let i = 2; i < process.argv.length; i ++) {
let dir = process.argv[i];
console.log(`${dir}: ${emptydir(dir) ? "" : "not "}empty`)
}</syntaxhighlight>
=={{header|Julia}}==
<
isemptydir(dir::AbstractString) = isempty(readdir(dir))
@show isemptydir(".")
@show isemptydir("/home")
</syntaxhighlight>
{{out}}
Line 621 ⟶ 771:
=={{header|Kotlin}}==
<
import java.io.File
Line 629 ⟶ 779:
val isEmpty = (File(dirPath).list().isEmpty())
println("$dirPath is ${if (isEmpty) "empty" else "not empty"}")
}</
=={{header|Lasso}}==
<
'<br />'
dir('no_content') -> isEmpty</
{{out}}
<pre>false
Line 640 ⟶ 790:
=={{header|Liberty BASIC}}==
<syntaxhighlight lang="lb">
dim info$(10, 10)
files "c:\", info$()
Line 656 ⟶ 806:
print "Folder ";folder$;" is empty."
end if
</syntaxhighlight>
=={{header|Lingo}}==
<
return getNthFileNameInFolder(dir, 1) = EMPTY
end</
=={{header|Lua}}==
Pure Lua function based on snipplet from Stack Overflow[http://stackoverflow.com/questions/5303174/how-to-get-list-of-directories-in-lua#11130774].
<
function scandir(directory)
local i, t, popen = 0, {}, io.popen
Line 682 ⟶ 832:
return #scandir(directory) == 0
end
</syntaxhighlight>
Using lfs[https://keplerproject.github.io/luafilesystem/] library.
<
function isemptydir(directory,nospecial)
for filename in require('lfs').dir(directory) do
Line 694 ⟶ 844:
return true
end
</syntaxhighlight>
=={{header|Maple}}==
<syntaxhighlight lang="maple">
emptydirectory := proc (dir)
is(listdir(dir) = [".", ".."]);
end proc;
</syntaxhighlight>
=={{header|Mathematica}} / {{header|Wolfram Language}}==
<
Example use:
EmptyDirectoryQ["C:\\Program Files\\Wolfram Research\\Mathematica\\9"]
->True</
=={{header|MATLAB}} / {{header|Octave}}==
<syntaxhighlight lang="matlab">
function x = isEmptyDirectory(p)
if isdir(p)
Line 722 ⟶ 871:
end;
end;
</syntaxhighlight>
=={{header|min}}==
{{works with|min|0.19.3}}
<syntaxhighlight lang="min">(ls bool not) :empty-dir?</syntaxhighlight>
=={{header|MS-DOS}}==
Since you cannot remove a directory that isn't empty, one way to check is to attempt to remove it.
<syntaxhighlight lang="dos">C:\>rd GAMES
Unable to remove: GAMES.
C:\></syntaxhighlight>
=={{header|Nanoquery}}==
<syntaxhighlight lang="nanoquery">def isempty(dirname)
return len(new(Nanoquery.IO.File).listDir(dirname)) = 0
end</syntaxhighlight>
=={{header|Nemerle}}==
<
using System.Console;
Line 744 ⟶ 908:
}
}
}</
=={{header|NewLISP}}==
<syntaxhighlight lang="newlisp">
(define (empty-dir? path-to-check)
(empty? (clean (lambda (x) (or (= "." x) (= ".." x))) (directory path-to-check)))
)
</syntaxhighlight>
=={{header|Nim}}==
<
var empty = true
Line 761 ⟶ 924:
empty = false
break
echo empty</
Alternatively:
<syntaxhighlight lang="nim">import os, sequtils
proc isEmptyDir(dir: string): bool =
toSeq(walkdir dir).len == 0
echo isEmptyDir("/tmp") # false - there is always something in "/tmp"
echo isEmptyDir("/temp") # true - "/temp" does not exist</syntaxhighlight>
=={{header|Objeck}}==
<
return Directory->List(dir)->Size() = 0;
}</
=={{header|OCaml}}==
<
Sys.readdir d = [| |]</
=={{header|ooRexx}}==
<
Call test 'D:\edir' /* an empty directory */
Call test 'D:\somedir' /* directory with 2 files */
Line 793 ⟶ 966:
End
End
Return</
{{out}}
<pre>Directory D:\nodir not found
Line 803 ⟶ 976:
Define a function ''chkdir(<path>)'' that returns count of entries in a directory (without . and .. ):
<
On error ''chkdir(...)'' returns -1 else count of entries. If ''chkdir() == 0'' then directory is empty. So define an additional function:
<
Output:<pre>chkdir("/tmp"): 52
dir_is_empty("/tmp"): 0</pre>
=={{header|Pascal}}==
{{works with|GNU Pascal}}
Pascal does not know the notion of directories.
Therefore it is ''not possible'' to determine whether a directory is empty.
However, ''GNU Pascal'' provides certain extensions to [[Extended Pascal]] (ISO 10206) so it is possible nonetheless.
Note, the following solution works only on ''strictly hierarchical'' file systems.
<syntaxhighlight lang="pascal">program emptyDirectory(input, output);
type
path = string(1024);
{
\brief determines whether a (hierarchial FS) directory is empty
\param accessVia a possible route to access a directory
\return whether \param accessVia is an empty directory
}
function isEmptyDirectory(protected accessVia: path): Boolean;
var
{ NB: `file` data types without a domain type are non-standard }
directory: bindable file;
FD: bindingType;
begin
{ initialize variables }
unbind(directory);
FD := binding(directory);
FD.name := accessVia;
{ binding to directories is usually not possible }
FD.force := true;
{ the actual test }
bind(directory, FD);
FD := binding(directory);
unbind(directory);
isEmptyDirectory := FD.bound and FD.directory and (FD.links <= 2)
end;
{ === MAIN ============================================================= }
var
s: path;
begin
readLn(s);
writeLn(isEmptyDirectory(s))
end.</syntaxhighlight>
Note, symbolic links’ targets are resolved, so <tt>accessVia</tt> could in fact be a symbolic link ''to'' an empty directory.
=={{header|Perl}}==
===Simple version===
<
This version however doesn't catch 'hidden' files that start with a dot.
Line 821 ⟶ 1,043:
Unfortunalety, BSD glob() doesn't handle inverted character class. If it did, this pattern could be used: <tt>{.[^.],}*</tt> (this works well in bash). But it doesn't, so there's a
===Thorough version===
<
sub dir_is_empty { !grep !/^\.{1,2}\z/, IO::Dir->new(@_)->read }</
=={{header|Phix}}==
<!--<syntaxhighlight lang="phix">(notonline)-->
<span style="color: #008080;">without</span> <span style="color: #008080;">js</span> <span style="color: #000080;font-style:italic;">-- file i/o</span>
<span style="color: #008080;">procedure</span> <span style="color: #000000;">test</span><span style="color: #0000FF;">(</span><span style="color: #004080;">string</span> <span style="color: #000000;">filename</span><span style="color: #0000FF;">)</span>
<span style="color: #004080;">string</span> <span style="color: #000000;">msg</span>
<span style="color: #008080;">switch</span> <span style="color: #7060A8;">get_file_type</span><span style="color: #0000FF;">(</span><span style="color: #000000;">filename</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">do</span>
<span style="color: #008080;">case</span> <span style="color: #000000;">FILETYPE_UNDEFINED</span><span style="color: #0000FF;">:</span> <span style="color: #000000;">msg</span> <span style="color: #0000FF;">=</span> <span style="color: #008000;">"is UNDEFINED"</span>
<span style="color: #008080;">case</span> <span style="color: #000000;">FILETYPE_NOT_FOUND</span><span style="color: #0000FF;">:</span> <span style="color: #000000;">msg</span> <span style="color: #0000FF;">=</span> <span style="color: #008000;">"is NOT_FOUND"</span>
<span style="color: #008080;">case</span> <span style="color: #004600;">FILETYPE_FILE</span><span style="color: #0000FF;">:</span> <span style="color: #000000;">msg</span> <span style="color: #0000FF;">=</span> <span style="color: #008000;">"is a FILE"</span>
<span style="color: #008080;">case</span> <span style="color: #004600;">FILETYPE_DIRECTORY</span><span style="color: #0000FF;">:</span>
<span style="color: #004080;">integer</span> <span style="color: #000000;">count</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">filter</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">vslice</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">dir</span><span style="color: #0000FF;">(</span><span style="color: #000000;">filename</span><span style="color: #0000FF;">),</span><span style="color: #004600;">D_NAME</span><span style="color: #0000FF;">),</span><span style="color: #008000;">"out"</span><span style="color: #0000FF;">,{</span><span style="color: #008000;">"."</span><span style="color: #0000FF;">,</span><span style="color: #008000;">".."</span><span style="color: #0000FF;">}))</span>
<span style="color: #000000;">msg</span> <span style="color: #0000FF;">=</span> <span style="color: #008080;">iff</span><span style="color: #0000FF;">(</span><span style="color: #000000;">count</span><span style="color: #0000FF;">=</span><span style="color: #000000;">0</span><span style="color: #0000FF;">?</span><span style="color: #008000;">"is an empty directory"</span>
<span style="color: #0000FF;">:</span><span style="color: #7060A8;">sprintf</span><span style="color: #0000FF;">(</span><span style="color: #008000;">"is a directory containing %d files"</span><span style="color: #0000FF;">,{</span><span style="color: #000000;">count</span><span style="color: #0000FF;">}))</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">switch</span>
<span style="color: #7060A8;">printf</span><span style="color: #0000FF;">(</span><span style="color: #000000;">1</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"%s %s\n"</span><span style="color: #0000FF;">,{</span><span style="color: #000000;">filename</span><span style="color: #0000FF;">,</span><span style="color: #000000;">msg</span><span style="color: #0000FF;">})</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">procedure</span>
<span style="color: #008080;">constant</span> <span style="color: #000000;">tests</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{</span><span style="color: #008000;">"C:\\xx"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"C:\\not_there"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"C:\\Program Files (x86)\\Phix\\p.exe"</span><span style="color: #0000FF;">,</span><span style="color: #008000;">"C:\\Windows"</span><span style="color: #0000FF;">}</span>
<span style="color: #008080;">for</span> <span style="color: #000000;">i</span><span style="color: #0000FF;">=</span><span style="color: #000000;">1</span> <span style="color: #008080;">to</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">tests</span><span style="color: #0000FF;">)</span> <span style="color: #008080;">do</span>
<span style="color: #000000;">test</span><span style="color: #0000FF;">(</span><span style="color: #000000;">tests</span><span style="color: #0000FF;">[</span><span style="color: #000000;">i</span><span style="color: #0000FF;">])</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">for</span>
<!--</syntaxhighlight>-->
{{out}}
<pre>
Line 866 ⟶ 1,078:
=={{header|PHP}}==
Any improvements welcome but here is a starting point for PHP
<
$dir = 'path_here';
Line 885 ⟶ 1,097:
}
</syntaxhighlight>
=={{header|PicoLisp}}==
<
{{out}}
<pre>myDir is not empty</pre>
=={{header|PowerShell}}==
{{works with|PowerShell|4.0}}
<syntaxhighlight lang="powershell">
$path = "C:\Users"
if((Dir $path).Count -eq 0) {
Line 903 ⟶ 1,114:
"$path is not empty"
}
</syntaxhighlight>
<b>Output:</b>
<pre>
C:\Users is not empty
</pre>
=={{header|Prolog}}==
<syntaxhighlight lang="prolog">non_empty_file('.').
non_empty_file('..').
empty_dir(Dir) :-
directory_files(Dir, Files),
maplist(non_empty_file, Files).</syntaxhighlight>
=={{header|PureBasic}}==
<
If Right(path$, 1) <> "\": path$ + "\": EndIf
Protected dirID = ExamineDirectory(#PB_Any, path$, "*.*")
Line 938 ⟶ 1,158:
EndIf
MessageRequester("Empty directory test", #DQUOTE$ + path$ + #DQUOTE$ + result$)
EndIf </
{{out}} when selecting directories "L:\vv\6\" and "L:\vv\" :
<pre>"L:\vv\6\" is empty.
Line 946 ⟶ 1,166:
=={{header|Python}}==
{{works with|Python|2.x}}
<
if os.listdir(raw_input("directory")):
print "not empty"
else:
print "empty"
</syntaxhighlight>
=={{header|R}}==
<syntaxhighlight lang="r">
is_dir_empty <- function(path){
if(length(list.files(path)) == 0)
print("This folder is empty")
}
is_dir_empty(path)
</syntaxhighlight>
=={{header|Racket}}==
<
#lang racket
(empty? (directory-list "some-directory"))
</syntaxhighlight>
=={{header|Raku}}==
(formerly Perl 6)
<syntaxhighlight lang="raku" line>sub dir-is-empty ($d) { not dir $d }</syntaxhighlight>
The <tt>dir</tt> function returns a lazy list of filenames, excluding "<tt>.</tt>" and "<tt>..</tt>" automatically. Any boolean context (in this case the <tt>not</tt> function) will do just enough work on the lazy list to determine whether there are any elements, so we don't have to count the directory entries, or even read them all into memory, if there are more than one buffer's worth.
=={{header|REXX}}==
{{works with|Regina}}
The following program was tested in a DOS window under Windows/XP and should work for all Microsoft Windows.
<
parse arg xdir; if xdir='' then xdir='\someDir' /*Any DIR? Use default.*/
@.=0 /*default in case ADDRESS fails. */
Line 976 ⟶ 1,211:
if #==0 then #=' no ' /*use a word, ¬zero.*/
say center('directory ' xdir " has " # ' entries.',79,'─')
exit @.0+rc /*stick a fork in it, we're done.*/</
{{out}} when the following input was used: <tt> temp </tt>
<pre>
Line 987 ⟶ 1,222:
=={{header|Ring}}==
<
myList = dir("C:\Ring\bin")
if len(myList) > 0 see "C:\Ring\bin is not empty" + nl
else see "C:\Ring\bin is empty" + nl ok
</syntaxhighlight>
=={{header|RPL}}==
≪ 1 OVER SIZE '''FOR''' j
DUP j GET EVAL
'''NEXT''' DROP
VARS SIZE NOT
≫ ''''MTDIR'''' STO
{{in}}
<pre>
{ HOME °RZTA °TEST } MTDIR
</pre>
{{out}}
<pre>
1: 0
</pre>
=={{header|Ruby}}==
Raises a SystemCallError if the named directory doesn’t exist.
<
=={{header|Run BASIC}}==
<
print "hasanswer: ";#f HASANSWER() ' if it has an answer it is not MT
print "rowcount: ";#f ROWCOUNT() ' if not MT, how many files?</
=={{header|Rust}}==
<
use std::error::Error;
Line 1,023 ⟶ 1,273:
}
}
}</
=={{header|Scala}}==
<
def isDirEmpty(file:File) : Boolean =
return file.exists && file.isDirectory && file.list.isEmpty</
=={{header|Seed7}}==
<
include "osfiles.s7i";
Line 1,041 ⟶ 1,291:
begin
writeln(dirEmpty("somedir"));
end func;</
=={{header|SenseTalk}}==
The filesAndFolders function returns an empty list if a directory is empty (and does not return '.' or '..').
<syntaxhighlight lang="sensetalk">put the temporary folder & "NewFolder" into newFolderPath
make folder newFolderPath -- create a new empty directory
if the filesAndFolders in newFolderPath is empty then
put "Directory " & newFolderPath & " is empty!"
else
put "Something is present in " & newFolderPath
end if
</syntaxhighlight>
{{out}}
<pre>
Directory /var/folders/dp/0nmm3z4m8xl5m3008k8db78h0000gn/T/NewFolder is empty!
</pre>
=={{header|Sidef}}==
Built-in method:
<
User-defined function:
<
dir.open(\var dir_h) || return nil;
dir_h.each { |file|
Line 1,055 ⟶ 1,321:
};
return true;
};</
=={{header|Standard ML}}==
<
let
val dir = OS.FileSys.openDir path
Line 1,069 ⟶ 1,335:
| _ => false
)
end;</
=={{header|Tcl}}==
<
# Get list of _all_ files in directory
set filenames [glob -nocomplain -tails -directory $dir * .*]
# Check whether list is empty (after filtering specials)
expr {![llength [lsearch -all -not -regexp $filenames {^\.\.?$}]]}
}</
=={{header|UNIX Shell}}==
<
#!/bin/sh
DIR=/tmp/foo
[ `ls -a $DIR|wc -l` -gt 2 ] && echo $DIR is NOT empty || echo $DIR is empty
</syntaxhighlight>
=={{header|VBA}}==
<syntaxhighlight lang="vb">Sub Main()
Debug.Print IsEmptyDirectory("C:\Temp")
Debug.Print IsEmptyDirectory("C:\Temp\")
End Sub
Private Function IsEmptyDirectory(D As String) As Boolean
Dim Sep As String
Sep = Application.PathSeparator
D = IIf(Right(D, 1) <> Sep, D & Sep, D)
IsEmptyDirectory = (Dir(D & "*.*") = "")
End Function</syntaxhighlight>
=={{header|VBScript}}==
<syntaxhighlight lang="vb">
Function IsDirEmpty(path)
IsDirEmpty = False
Line 1,101 ⟶ 1,379:
WScript.StdOut.WriteLine IsDirEmpty("C:\Temp")
WScript.StdOut.WriteLine IsDirEmpty("C:\Temp\test")
</syntaxhighlight>
{{Out}}
Line 1,107 ⟶ 1,385:
False
True
</pre>
=={{header|V (Vlang)}}==
<syntaxhighlight lang="v (vlang)">import os
fn main() {
println(is_empty_dir('../Check'))
}
fn is_empty_dir(name string) string {
if os.is_dir(name) == false {return 'Directory name not exist!'}
if os.is_dir(name) && os.is_dir_empty(name) == true {return 'Directory exists and is empty!'}
return 'Directory not empty!'
}
</syntaxhighlight>
=={{header|Wren}}==
<syntaxhighlight lang="wren">import "io" for Directory
var isEmptyDir = Fn.new { |path|
if (!Directory.exists(path)) Fiber.abort("Directory at '%(path)' does not exist.")
return Directory.list(path).count == 0
}
var path = "test"
var empty = isEmptyDir.call(path)
System.print("'%(path)' is %(empty ? "empty" : "not empty")")</syntaxhighlight>
{{out}}
'test' is an empty directory I made earlier.
<pre>
'test' is empty
</pre>
=={{header|zkl}}==
<
File.mkdir(path); File.isDir(path).println();
File.glob(path+"/*").println(); // show contents of directory</
{{out}}
<pre>
|
Latest revision as of 16:58, 28 November 2023
You are encouraged to solve this task according to the task description, using any language you may know.
Starting with a path to some directory, determine whether the directory is empty.
An empty directory contains no files nor subdirectories.
With Unix or Windows systems, every directory contains an entry for “.
” and almost every directory contains “..
” (except for a root directory); an empty directory contains no other entries.
11l
I fs:list_dir(input()).empty
print(‘empty’)
E
print(‘not empty’)
8086 Assembly
; this routine attempts to remove the directory and returns an error code if it cannot.
mov ax,seg dirname ;load into AX the segment where dirname is stored.
mov ds,ax ;load the segment register DS with the segment of dirname
mov dx,offset dirname ;load into DX the offset of dirname
mov ah,39h ;0x39 is the interrupt code for remove directory
int 21h ;sets carry if error is encountered. error code will be in AX.
;If carry is clear the remove was successful
jc error
mov ah,4Ch ;return function
mov al,0 ;required return code
int 21h ;return to DOS
error: ;put your error handler here
mov ah,4Ch ;return function
mov al,0 ;required return code
int 21h ;return to DOS
dirname db "GAMES",0
Ada
with Ada.Text_IO; use Ada.Text_IO;
with Ada.Directories;
procedure EmptyDir is
function Empty (path : String) return String is
use Ada.Directories;
result : String := "Is empty.";
procedure check (ent : Directory_Entry_Type) is begin
if Simple_Name (ent) /= "." and Simple_Name (ent) /= ".." then
Empty.result := "Not empty";
end if;
end check;
begin
if not Exists (path) then return "Does not exist.";
elsif Kind (path) /= Directory then return "Not a Directory.";
end if;
Search (path, "", Process => check'Access);
return result;
end Empty;
begin
Put_Line (Empty ("."));
Put_Line (Empty ("./empty"));
Put_Line (Empty ("./emptydir.adb"));
Put_Line (Empty ("./foobar"));
end EmptyDir;
- Output:
Not empty Is empty. Not a Directory. Does not exist.
ALGOL 68
This uses the "argc", "argv", "file is directory" and "get directory" procedures specific to Algol 68 G.
Note the Algol 68 G interpreter processes the command line parameters before "-" so this example expects the directory names to follow "-".
# returns TRUE if the specified directory is empty, FALSE if it doesn't exist or is non-empty #
PROC is empty directory = ( STRING directory )BOOL:
IF NOT file is directory( directory )
THEN
# directory doesn't exist #
FALSE
ELSE
# directory is empty if it contains no files or just "." and possibly ".." #
[]STRING files = get directory( directory );
BOOL result := FALSE;
FOR f FROM LWB files TO UPB files
WHILE result := files[ f ] = "." OR files[ f ] = ".."
DO
SKIP
OD;
result
FI # is empty directory # ;
# test the is empty directory procedure #
# show whether the directories specified on the command line ( following "-" ) are empty or not #
BOOL directory name parameter := FALSE;
FOR i TO argc DO
IF argv( i ) = "-"
THEN
# marker to indicate directory names follow #
directory name parameter := TRUE
ELIF directory name parameter
THEN
# have a directory name - report whether it is emty or not #
print( ( argv( i ), " is ", IF is empty directory( argv( i ) ) THEN "empty" ELSE "not empty" FI, newline ) )
FI
OD
- Output:
H:\algol\rosetta>a68g emptyDirectory.a68 - . /temp \zz . is not empty /temp is not empty \zz is empty
Arturo
emptyDir?: function [folder]-> empty? list folder
print emptyDir? "."
- Output:
false
AutoHotkey
MsgBox % isDir_empty(A_ScriptDir)?"true":"false"
isDir_empty(p) {
Loop, %p%\* , 1
return 0
return 1
}
- Output:
false
AWK
# syntax: GAWK -f EMPTY_DIRECTORY.AWK
BEGIN {
n = split("C:\\TEMP3,C:\\NOTHERE,C:\\AWK\\FILENAME,C:\\WINDOWS",arr,",")
for (i=1; i<=n; i++) {
printf("'%s' %s\n",arr[i],is_dir(arr[i]))
}
exit(0)
}
function is_dir(path, cmd,dots,entries,msg,rec,valid_dir) {
cmd = sprintf("DIR %s 2>NUL",path) # MS-Windows
while ((cmd | getline rec) > 0) {
if (rec ~ /[0-9]:[0-5][0-9]/) {
if (rec ~ / (\.|\.\.)$/) { # . or ..
dots++
continue
}
entries++
}
if (rec ~ / Dir\(s\) .* bytes free$/) {
valid_dir = 1
}
}
close(cmd)
if (valid_dir == 0) {
msg = "does not exist"
}
else if (valid_dir == 1 && entries == 0) {
msg = "is an empty directory"
}
else if (dots == 0 && entries == 1) {
msg = "is a file"
}
else {
msg = sprintf("is a directory with %d entries",entries)
}
return(msg)
}
- Output:
'C:\TEMP3' is an empty directory 'C:\NOTHERE' does not exist 'C:\AWK\FILENAME' is a file 'C:\WINDOWS' is a directory with 98 entries
BASIC
BaCon
FUNCTION check$(dir$)
IF FILEEXISTS(dir$) THEN
RETURN IIF$(LEN(WALK$(dir$, 127, ".+", FALSE)), " is NOT empty.", " is empty." )
ELSE
RETURN " doesn't exist."
ENDIF
ENDFUNCTION
dir$ = "bla"
PRINT "Directory '", dir$, "'", check$(dir$)
dir$ = "/mnt"
PRINT "Directory '", dir$, "'", check$(dir$)
dir$ = "."
PRINT "Directory '", dir$, "'", check$(dir$)
- Output:
Directory 'bla' doesn't exist. Directory '/mnt' is empty. Directory '.' is NOT empty.
Batch File
This demo verifies first if the directory exists. This script returns errorlevel code:
- 0 - input directory is empty.
- 1 - input directory is NOT empty.
- 2 - input directory does not exist.
- 3 - input not found.
@echo off
if "%~1"=="" exit /b 3
set "samp_path=%~1"
set "tst_var="
%== Store the current directory of the CMD ==%
for /f %%T in ('cd') do set curr_dir=%%T
%== Go to the samp_path ==%
cd %samp_path% 2>nul ||goto :folder_not_found
%== The current directory is now samp_path ==%
%== Scan what is inside samp_path ==%
for /f "usebackq delims=" %%D in (
`dir /b 2^>nul ^& dir /b /ah 2^>nul`
) do set "tst_var=1"
if "%tst_var%"=="1" (
echo "%samp_path%" is NOT empty.
cd %curr_dir%
exit /b 1
) else (
echo "%samp_path%" is empty.
cd %curr_dir%
exit /b 0
)
:folder_not_found
echo Folder not found.
exit /b 2
- Sample Session:
(Saved the Batch File as IsEmpty.Bat in C:\)
C:\>IsEmpty C:\>echo %errorlevel% 3 C:\>IsEmpty "C:\Sample" Folder not found. C:\>md Sample C:\>IsEmpty "C:\Sample" "C:\Sample" is empty. C:\>cd Sample C:\Sample>echo 0123456789 >>digits.txt C:\Sample>dir /b digits.txt C:\Sample>cd.. C:\>IsEmpty "C:\Sample" "C:\Sample" is NOT empty. C:\>
BBC BASIC
IF FNisdirectoryempty("C:\") PRINT "C:\ is empty" ELSE PRINT "C:\ is not empty"
IF FNisdirectoryempty("C:\temp") PRINT "C:\temp is empty" ELSE PRINT "C:\temp is not empty"
END
DEF FNisdirectoryempty(dir$)
LOCAL dir%, sh%, res%
DIM dir% LOCAL 317
IF RIGHT$(dir$)<>"\" dir$ += "\"
SYS "FindFirstFile", dir$+"*", dir% TO sh%
IF sh% = -1 ERROR 100, "Directory doesn't exist"
res% = 1
REPEAT
IF $$(dir%+44)<>"." IF $$(dir%+44)<>".." EXIT REPEAT
SYS "FindNextFile", sh%, dir% TO res%
UNTIL res% == 0
SYS "FindClose", sh%
= (res% == 0)
C
#include <stdio.h>
#include <dirent.h>
#include <string.h>
int dir_empty(const char *path)
{
struct dirent *ent;
int ret = 1;
DIR *d = opendir(path);
if (!d) {
fprintf(stderr, "%s: ", path);
perror("");
return -1;
}
while ((ent = readdir(d))) {
if (!strcmp(ent->d_name, ".") || !(strcmp(ent->d_name, "..")))
continue;
ret = 0;
break;
}
closedir(d);
return ret;
}
int main(int c, char **v)
{
int ret = 0, i;
if (c < 2) return -1;
for (i = 1; i < c; i++) {
ret = dir_empty(v[i]);
if (ret >= 0)
printf("%s: %sempty\n", v[i], ret ? "" : "not ");
}
return 0;
}
Running it:
% mkdir stuff; ./a.out /usr/ ./stuff /etc/passwd /usr/: not empty ./stuff: empty /etc/passwd: Not a directory
C#
using System;
using System.IO;
class Program
{
static void Main( string[] args )
{
foreach ( string dir in args )
{
Console.WriteLine( "'{0}' {1} empty", dir, IsDirectoryEmpty( dir ) ? "is" : "is not" );
}
}
private static bool IsDirectoryEmpty( string dir )
{
return ( Directory.GetFiles( dir ).Length == 0 &&
Directory.GetDirectories( dir ).Length == 0 );
}
}
Running it:
Assume c:\temp exists and is not empty, c:\temp\empty exists and is empty c:\>IsEmptyDir c:\temp c:\temp\empty 'c:\temp' is not empty 'c:\temp\empty' is empty
C++
#include <iostream>
#include <boost/filesystem.hpp>
using namespace boost::filesystem;
int main(int argc, char *argv[])
{
for (int i = 1; i < argc; ++i) {
path p(argv[i]);
if (exists(p) && is_directory(p))
std::cout << "'" << argv[i] << "' is" << (!is_empty(p) ? " not" : "") << " empty\n";
else
std::cout << "dir '" << argv[i] << "' could not be found\n";
}
}
Clojure
(require '[clojure.java.io :as io])
(defn empty-dir? [path]
(let [file (io/file path)]
(assert (.exists file))
(assert (.isDirectory file))
(-> file .list empty?))) ; .list ignores "." and ".."
CoffeeScript
fs = require 'fs'
is_empty_dir = (dir) ->
throw Error "#{dir} is not a dir" unless fs.statSync(dir).isDirectory()
# readdirSync does not return . or ..
fns = fs.readdirSync dir
fns.length == 0
Common Lisp
Will also return T
if path
doesn't exist.
(defun empty-directory-p (path)
(and (null (directory (concatenate 'string path "/*")))
(null (directory (concatenate 'string path "/*/")))))
D
import std.stdio, std.file;
void main() {
auto dir = "somedir";
writeln(dir ~ " is empty: ", dirEmpty(dir));
}
bool dirEmpty(string dirname) {
if (!exists(dirname) || !isDir(dirname))
throw new Exception("dir not found: " ~ dirname);
return dirEntries(dirname, SpanMode.shallow).empty;
}
somedir is empty: false
Delphi
program Empty_directory;
{$APPTYPE CONSOLE}
uses
System.SysUtils,
System.IOUtils;
function IsDirectoryEmpty(dir: string): Boolean;
var
count: Integer;
begin
count := Length(TDirectory.GetFiles(dir)) + Length(TDirectory.GetDirectories(dir));
Result := count = 0;
end;
var
i: Integer;
const
CHECK: array[Boolean] of string = (' is not', ' is');
begin
if ParamCount > 0 then
for i := 1 to ParamCount do
Writeln(ParamStr(i), CHECK[IsDirectoryEmpty(ParamStr(i))], ' empty');
Readln;
end.
- Output:
The same of c#.
Elixir
path = hd(System.argv)
IO.puts File.dir?(path) and Enum.empty?( File.ls!(path) )
Erlang
From the Erlang shell, or in a program, match {ok, []}. It this works the directory is empty.
- Output:
3> {ok, []} = file:list_dir_all("/usr"). ** exception error: no match of right hand side value {ok,["X11R6","X11","standalone","share","sbin","local", "libexec","lib","bin"]} 4> {ok, []} = file:list_dir_all("/asd"). ** exception error: no match of right hand side value {error,enoent} 5> {ok, []} = file:list_dir_all("./empty"). {ok,[]}
F#
open System.IO
let isEmptyDirectory x = (Directory.GetFiles x).Length = 0 && (Directory.GetDirectories x).Length = 0
Factor
USE: io.directories
: empty-directory? ( path -- ? ) directory-entries empty? ;
FreeBASIC
' FB 1.05.0 Win64
#Include "dir.bi"
Function IsDirEmpty(dirPath As String) As Boolean
Err = 0
' check dirPath is a valid directory
Dim As String fileName = Dir(dirPath, fbDirectory)
If Len(fileName) = 0 Then
Err = 1000 ' dirPath is not a valid path
Return False
End If
' now check if there are any files/subdirectories in it other than . and ..
Dim fileSpec As String = dirPath + "\*.*"
Const attribMask = fbNormal Or fbHidden Or fbSystem Or fbDirectory
Dim outAttrib As UInteger
fileName = Dir(fileSpec, attribMask, outAttrib) ' get first file
Do
If fileName <> ".." AndAlso fileName <> "." Then
If Len(fileName) = 0 Then Return True
Exit Do
End If
fileName = Dir ' get next file
Loop
Return False
End Function
Dim outAttrib As UInteger
Dim dirPath As String = "c:\freebasic\docs" ' known to be empty
Dim empty As Boolean = IsDirEmpty(dirPath)
Dim e As Long = Err
If e = 1000 Then
Print "'"; dirPath; "' is not a valid directory"
End
End If
If empty Then
Print "'"; dirPath; "' is empty"
Else
Print "'"; dirPath; "' is not empty"
End If
Print
Print "Press any key to quit"
Sleep
- Output:
'c:\freebasic\docs' is empty
FutureBasic
include "NSLog.incl"
local fn DirectoryContents( url as CFURLRef ) as CFArrayRef
CFArrayRef contents = fn FileManagerContentsOfDirectoryAtURL( url, NULL, NSDirectoryEnumerationSkipsHiddenFiles )
if ( contents == NULL )
NSLog(@"Unable to get contents of directory \"%@\".",fn URLLastPathComponent(url))
end if
end fn = fn ArrayValueForKey( contents, @"lastPathComponent" )
void local fn DoIt
CFURLRef dirURL, fileURL
CFArrayRef contents
dirURL = fn URLFileURLWithPath( fn StringByExpandingTildeInPath( @"~/Desktop/docs" ) )
if ( fn FileManagerCreateDirectoryAtURL( dirURL, YES, NULL ) )
contents = fn DirectoryContents( dirURL )
if ( contents )
NSLog(@"Directory \"docs\" \b")
if ( len(contents) )
NSLog(@"contents:\n%@",contents)
else
NSLog(@"is empty.")
end if
NSLog(@"")
fileURL = fn URLFileURLWithPath( fn StringByExpandingTildeInPath( @"~/Desktop/docs/output.txt" ) )
if (fn FileManagerCreateFileAtURL( fileURL, NULL, NULL ) )
contents = fn DirectoryContents( dirURL )
NSLog(@"Directory \"docs\" \b")
if ( len(contents) )
NSLog(@"contents:\n%@",contents)
else
NSLog(@"is empty.")
end if
end if
end if
end if
end fn
fn DoIt
HandleEvents
- Output:
Directory "docs" is empty. Directory "docs" contents: ( "output.txt" )
Gambas
Public Sub Main()
Dim sFolder As String = User.home &/ "Rosetta"
Dim sDir As String[] = Dir(sFolder)
Dim sTemp As String
Dim sOutput As String = sfolder & " is NOT empty"
Try sTemp = sDir[0]
If Error Then sOutput = sfolder & " is empty"
Print sOutput
End
Output:
/home/charlie/Rosetta is empty
Go
package main
import (
"fmt"
"io/ioutil"
"log"
)
func main() {
empty, err := IsEmptyDir("/tmp")
if err != nil {
log.Fatalln(err)
}
if empty {
fmt.Printf("/tmp is empty\n")
} else {
fmt.Printf("/tmp is not empty\n")
}
}
func IsEmptyDir(name string) (bool, error) {
entries, err := ioutil.ReadDir(name)
if err != nil {
return false, err
}
return len(entries) == 0, nil
}
Groovy
Solution:
def isDirEmpty = { dirName ->
def dir = new File(dirName)
dir.exists() && dir.directory && (dir.list() as List).empty
}
Test:
def currentDir = new File('.')
def random = new Random()
def subDirName = "dir${random.nextInt(100000)}"
def subDir = new File(subDirName)
subDir.mkdir()
subDir.deleteOnExit()
assert ! isDirEmpty('.')
assert isDirEmpty(subDirName)
Haskell
import System.Directory (getDirectoryContents)
import System.Environment (getArgs)
isEmpty x = getDirectoryContents x >>= return . f . (== [".", ".."])
where f True = "Directory is empty"
f False = "Directory is not empty"
main = getArgs >>= isEmpty . (!! 0) >>= putStrLn
Test:
$ mkdir 1
$ ./isempty 1
Directory is empty
$ ./isempty /usr/
Directory is not empty
Icon and Unicon
This example uses Unicon extensions. The 'empty' sub-directory was manually setup for this test.
- Output:
. is not empty ./empty is empty
J
require 'dir'
empty_dir=: 0 = '/*' #@dir@,~ ]
In other words, list the contents of the directory, count how many items are in it, and test if that count was zero.
Note that 1!:0
could have been used here, instead of the dir
cover.
Example, under windows, create some directories using cygwin:
$ mkdir /tmp/a
$ touch /tmp/a/...
$ mkdir /tmp/b
$ mkdir /tmp/c
$ mkdir /tmp/c/d
Then, testing these directories, in J:
empty_dir 'c:/cygwin/tmp/a'
0
empty_dir 'c:/cygwin/tmp/b'
1
empty_dir 'c:/cygwin/tmp/c'
0
Java
This method does not check that the path given is actually a directory. If a path to a normal file is given, it will throw a NullPointerException
. File.listFiles()
does not count the "." and ".." entries.
import java.nio.file.Paths;
//... other class code here
public static boolean isEmptyDir(String dirName){
return Paths.get(dirName).toFile().listFiles().length == 0;
}
JavaScript
The ECMAScript standard itself defines no IO interface – the following example makes use of the Node.js file IO library.
// Node.js v14.15.4
const { readdirSync } = require("fs");
const emptydir = (path) => readdirSync(path).length == 0;
// tests, run like node emptydir.js [directories]
for (let i = 2; i < process.argv.length; i ++) {
let dir = process.argv[i];
console.log(`${dir}: ${emptydir(dir) ? "" : "not "}empty`)
}
Julia
# v0.6.0
isemptydir(dir::AbstractString) = isempty(readdir(dir))
@show isemptydir(".")
@show isemptydir("/home")
- Output:
isemptydir(".") = false isemptydir("/home") = false
Kotlin
// version 1.1.4
import java.io.File
fun main(args: Array<String>) {
val dirPath = "docs" // or whatever
val isEmpty = (File(dirPath).list().isEmpty())
println("$dirPath is ${if (isEmpty) "empty" else "not empty"}")
}
Lasso
dir('has_content') -> isEmpty
'<br />'
dir('no_content') -> isEmpty
- Output:
false true
Liberty BASIC
dim info$(10, 10)
files "c:\", info$()
qtyFiles=val(info$(0,0))
n = qtyFiles+1 'begin directory info
folder$ = info$(n,0) 'path to first directory in c:
files folder$, info$() 're-fill array with data from sub folder
if val(info$(0,0)) + val(info$(0, 1)) <> 0 then
print "Folder ";folder$;" is not empty."
else
print "Folder ";folder$;" is empty."
end if
Lingo
on isDirEmpty (dir)
return getNthFileNameInFolder(dir, 1) = EMPTY
end
Lua
Pure Lua function based on snipplet from Stack Overflow[1].
function scandir(directory)
local i, t, popen = 0, {}, io.popen
local pfile = popen('ls -a "'..directory..'"')
for filename in pfile:lines() do
if filename ~= '.' and filename ~= '..' then
i = i + 1
t[i] = filename
end
end
pfile:close()
return t
end
function isemptydir(directory)
return #scandir(directory) == 0
end
Using lfs[2] library.
function isemptydir(directory,nospecial)
for filename in require('lfs').dir(directory) do
if filename ~= '.' and filename ~= '..' then
return false
end
end
return true
end
Maple
emptydirectory := proc (dir)
is(listdir(dir) = [".", ".."]);
end proc;
Mathematica / Wolfram Language
EmptyDirectoryQ[x_] := (SetDirectory[x]; If[FileNames[] == {}, True, False])
Example use:
EmptyDirectoryQ["C:\\Program Files\\Wolfram Research\\Mathematica\\9"]
->True
MATLAB / Octave
function x = isEmptyDirectory(p)
if isdir(p)
f = dir(p)
x = length(f)>2;
else
error('Error: %s is not a directory');
end;
end;
min
(ls bool not) :empty-dir?
MS-DOS
Since you cannot remove a directory that isn't empty, one way to check is to attempt to remove it.
C:\>rd GAMES
Unable to remove: GAMES.
C:\>
Nanoquery
def isempty(dirname)
return len(new(Nanoquery.IO.File).listDir(dirname)) = 0
end
Nemerle
using System.IO;
using System.Console;
module EmptyDirectory
{
IsDirectoryEmpty(dir : string) : bool
{
Directory.GetFileSystemEntries(dir).Length == 0
}
Main(args : array[string]) : void
{
foreach (dir in args) {
when (Directory.Exists(dir)) {
WriteLine("{0} {1} empty.", dir, if (IsDirectoryEmpty(dir)) "is" else "is not");
}
}
}
}
NewLISP
(define (empty-dir? path-to-check)
(empty? (clean (lambda (x) (or (= "." x) (= ".." x))) (directory path-to-check)))
)
Nim
import os, rdstdin
var empty = true
for f in walkDir(readLineFromStdin "directory: "):
empty = false
break
echo empty
Alternatively:
import os, sequtils
proc isEmptyDir(dir: string): bool =
toSeq(walkdir dir).len == 0
echo isEmptyDir("/tmp") # false - there is always something in "/tmp"
echo isEmptyDir("/temp") # true - "/temp" does not exist
Objeck
function : IsEmptyDirectory(dir : String) ~ Bool {
return Directory->List(dir)->Size() = 0;
}
OCaml
let is_dir_empty d =
Sys.readdir d = [| |]
ooRexx
Call test 'D:\nodir' /* no such directory */
Call test 'D:\edir' /* an empty directory */
Call test 'D:\somedir' /* directory with 2 files */
Call test 'D:\somedir','S' /* directory with 3 files */
Exit
test: Parse Arg fd,nest
If SysIsFileDirectory(fd)=0 Then
Say 'Directory' fd 'not found'
Else Do
ret=SysFileTree(fd'\*.*','X', 'F'nest)
If x.0=0 Then
say 'Directory' fd 'is empty'
Else Do
If nest='' Then
say 'Directory' fd 'contains' x.0 'files'
Else
say 'Directory' fd 'contains' x.0 'files (some nested)'
End
End
Return
- Output:
Directory D:\nodir not found Directory D:\edir is empty Directory D:\somedir contains 2 files Directory D:\somedir contains 3 files (some nested)
PARI/GP
Define a function chkdir(<path>) that returns count of entries in a directory (without . and .. ):
chkdir(d)=extern(concat(["[ -d '",d,"' ]&&ls -A '",d,"'|wc -l||echo -1"]))
On error chkdir(...) returns -1 else count of entries. If chkdir() == 0 then directory is empty. So define an additional function:
dir_is_empty(d)=!chkdir(d)
Output:
chkdir("/tmp"): 52 dir_is_empty("/tmp"): 0
Pascal
Pascal does not know the notion of directories. Therefore it is not possible to determine whether a directory is empty.
However, GNU Pascal provides certain extensions to Extended Pascal (ISO 10206) so it is possible nonetheless. Note, the following solution works only on strictly hierarchical file systems.
program emptyDirectory(input, output);
type
path = string(1024);
{
\brief determines whether a (hierarchial FS) directory is empty
\param accessVia a possible route to access a directory
\return whether \param accessVia is an empty directory
}
function isEmptyDirectory(protected accessVia: path): Boolean;
var
{ NB: `file` data types without a domain type are non-standard }
directory: bindable file;
FD: bindingType;
begin
{ initialize variables }
unbind(directory);
FD := binding(directory);
FD.name := accessVia;
{ binding to directories is usually not possible }
FD.force := true;
{ the actual test }
bind(directory, FD);
FD := binding(directory);
unbind(directory);
isEmptyDirectory := FD.bound and FD.directory and (FD.links <= 2)
end;
{ === MAIN ============================================================= }
var
s: path;
begin
readLn(s);
writeLn(isEmptyDirectory(s))
end.
Note, symbolic links’ targets are resolved, so accessVia could in fact be a symbolic link to an empty directory.
Perl
Simple version
sub dir_is_empty {!<$_[0]/*>}
This version however doesn't catch 'hidden' files that start with a dot.
May be good for quick one-liners or in some special cases when you are sure that there are no 'hidden' files or they doesn't play any role.
Unfortunalety, BSD glob() doesn't handle inverted character class. If it did, this pattern could be used: {.[^.],}* (this works well in bash). But it doesn't, so there's a
Thorough version
use IO::Dir;
sub dir_is_empty { !grep !/^\.{1,2}\z/, IO::Dir->new(@_)->read }
Phix
without js -- file i/o procedure test(string filename) string msg switch get_file_type(filename) do case FILETYPE_UNDEFINED: msg = "is UNDEFINED" case FILETYPE_NOT_FOUND: msg = "is NOT_FOUND" case FILETYPE_FILE: msg = "is a FILE" case FILETYPE_DIRECTORY: integer count = length(filter(vslice(dir(filename),D_NAME),"out",{".",".."})) msg = iff(count=0?"is an empty directory" :sprintf("is a directory containing %d files",{count})) end switch printf(1,"%s %s\n",{filename,msg}) end procedure constant tests = {"C:\\xx","C:\\not_there","C:\\Program Files (x86)\\Phix\\p.exe","C:\\Windows"} for i=1 to length(tests) do test(tests[i]) end for
- Output:
C:\xx is an empty directory C:\not_there is NOT_FOUND C:\Program Files (x86)\Phix\p.exe is a FILE C:\Windows is a directory containing 110 files
PHP
Any improvements welcome but here is a starting point for PHP
$dir = 'path_here';
if(is_dir($dir)){
//scandir grabs the contents of a directory and array_diff is being used to filter out .. and .
$list = array_diff(scandir($dir), array('..', '.'));
//now we can just use empty to check if the variable has any contents regardless of it's type
if(empty($list)){
echo 'dir is empty';
}
else{
echo 'dir is not empty';
}
}
else{
echo 'not a directory';
}
PicoLisp
(prinl "myDir is" (and (dir "myDir") " not") " empty")
- Output:
myDir is not empty
PowerShell
$path = "C:\Users"
if((Dir $path).Count -eq 0) {
"$path is empty"
} else {
"$path is not empty"
}
Output:
C:\Users is not empty
Prolog
non_empty_file('.').
non_empty_file('..').
empty_dir(Dir) :-
directory_files(Dir, Files),
maplist(non_empty_file, Files).
PureBasic
Procedure isDirEmpty(path$)
If Right(path$, 1) <> "\": path$ + "\": EndIf
Protected dirID = ExamineDirectory(#PB_Any, path$, "*.*")
Protected result
If dirID
result = 1
While NextDirectoryEntry(dirID)
If DirectoryEntryType(dirID) = #PB_DirectoryEntry_File Or (DirectoryEntryName(dirID) <> "." And DirectoryEntryName(dirID) <> "..")
result = 0
Break
EndIf
Wend
FinishDirectory(dirID)
EndIf
ProcedureReturn result
EndProcedure
Define path$, result$
path$ = PathRequester("Choose a path", "C:\")
If path$
If isDirEmpty(path$)
result$ = " is empty."
Else
result$ = " is not empty."
EndIf
MessageRequester("Empty directory test", #DQUOTE$ + path$ + #DQUOTE$ + result$)
EndIf
- Output:
when selecting directories "L
"L:\vv\6\" is empty. "L:\vv\" is not empty.
Python
import os;
if os.listdir(raw_input("directory")):
print "not empty"
else:
print "empty"
R
is_dir_empty <- function(path){
if(length(list.files(path)) == 0)
print("This folder is empty")
}
is_dir_empty(path)
Racket
#lang racket
(empty? (directory-list "some-directory"))
Raku
(formerly Perl 6)
sub dir-is-empty ($d) { not dir $d }
The dir function returns a lazy list of filenames, excluding "." and ".." automatically. Any boolean context (in this case the not function) will do just enough work on the lazy list to determine whether there are any elements, so we don't have to count the directory entries, or even read them all into memory, if there are more than one buffer's worth.
REXX
The following program was tested in a DOS window under Windows/XP and should work for all Microsoft Windows.
/*REXX pgm checks to see if a directory is empty; if not, lists entries.*/
parse arg xdir; if xdir='' then xdir='\someDir' /*Any DIR? Use default.*/
@.=0 /*default in case ADDRESS fails. */
trace off /*suppress REXX err msg for fails*/
address system 'DIR' xdir '/b' with output stem @. /*issue the DIR cmd.*/
if rc\==0 then do /*an error happened?*/
say '***error!*** from DIR' xDIR /*indicate que pasa.*/
say 'return code=' rc /*show the ret Code.*/
exit rc /*exit with the RC.*/
end /* [↑] bad address.*/
#=@.rc /*number of entries.*/
if #==0 then #=' no ' /*use a word, ¬zero.*/
say center('directory ' xdir " has " # ' entries.',79,'─')
exit @.0+rc /*stick a fork in it, we're done.*/
- Output:
when the following input was used
──────────────────────directory temp has 10 entries.───────────────────────
- Output:
when the following input was used
───────────────────directory \someDir has no entries.───────────────────
Ring
myList = dir("C:\Ring\bin")
if len(myList) > 0 see "C:\Ring\bin is not empty" + nl
else see "C:\Ring\bin is empty" + nl ok
RPL
≪ 1 OVER SIZE FOR j DUP j GET EVAL NEXT DROP VARS SIZE NOT ≫ 'MTDIR' STO
- Input:
{ HOME °RZTA °TEST } MTDIR
- Output:
1: 0
Ruby
Raises a SystemCallError if the named directory doesn’t exist.
Dir.entries("testdir").empty?
Run BASIC
files #f, DefaultDir$ + "\*.*" ' open some directory.
print "hasanswer: ";#f HASANSWER() ' if it has an answer it is not MT
print "rowcount: ";#f ROWCOUNT() ' if not MT, how many files?
Rust
use std::fs::read_dir;
use std::error::Error;
fn main() {
for path in std::env::args().skip(1) { // iterate over the arguments, skipping the first (which is the executable)
match read_dir(path.as_str()) { // try to read the directory specified
Ok(contents) => {
let len = contents.collect::<Vec<_>>().len(); // calculate the amount of items in the directory
if len == 0 {
println!("{} is empty", path);
} else {
println!("{} is not empty", path);
}
},
Err(e) => { // If the attempt failed, print the corresponding error msg
println!("Failed to read directory \"{}\": {}", path, e.description());
}
}
}
}
Scala
import java.io.File
def isDirEmpty(file:File) : Boolean =
return file.exists && file.isDirectory && file.list.isEmpty
Seed7
$ include "seed7_05.s7i";
include "osfiles.s7i";
const func boolean: dirEmpty (in string: dirName) is
return fileType(dirName) = FILE_DIR and length(readDir(dirName)) = 0;
const proc: main is func
begin
writeln(dirEmpty("somedir"));
end func;
SenseTalk
The filesAndFolders function returns an empty list if a directory is empty (and does not return '.' or '..').
put the temporary folder & "NewFolder" into newFolderPath
make folder newFolderPath -- create a new empty directory
if the filesAndFolders in newFolderPath is empty then
put "Directory " & newFolderPath & " is empty!"
else
put "Something is present in " & newFolderPath
end if
- Output:
Directory /var/folders/dp/0nmm3z4m8xl5m3008k8db78h0000gn/T/NewFolder is empty!
Sidef
Built-in method:
Dir.new('/my/dir').is_empty; # true, false or nil
User-defined function:
func is_empty(dir) {
dir.open(\var dir_h) || return nil;
dir_h.each { |file|
file ~~ ['.', '..'] && next;
return false;
};
return true;
};
Standard ML
fun isDirEmpty(path: string) =
let
val dir = OS.FileSys.openDir path
val dirEntryOpt = OS.FileSys.readDir dir
in
(
OS.FileSys.closeDir(dir);
case dirEntryOpt of
NONE => true
| _ => false
)
end;
Tcl
proc isEmptyDir {dir} {
# Get list of _all_ files in directory
set filenames [glob -nocomplain -tails -directory $dir * .*]
# Check whether list is empty (after filtering specials)
expr {![llength [lsearch -all -not -regexp $filenames {^\.\.?$}]]}
}
UNIX Shell
#!/bin/sh
DIR=/tmp/foo
[ `ls -a $DIR|wc -l` -gt 2 ] && echo $DIR is NOT empty || echo $DIR is empty
VBA
Sub Main()
Debug.Print IsEmptyDirectory("C:\Temp")
Debug.Print IsEmptyDirectory("C:\Temp\")
End Sub
Private Function IsEmptyDirectory(D As String) As Boolean
Dim Sep As String
Sep = Application.PathSeparator
D = IIf(Right(D, 1) <> Sep, D & Sep, D)
IsEmptyDirectory = (Dir(D & "*.*") = "")
End Function
VBScript
Function IsDirEmpty(path)
IsDirEmpty = False
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFolder = objFSO.GetFolder(path)
If objFolder.Files.Count = 0 And objFolder.SubFolders.Count = 0 Then
IsDirEmpty = True
End If
End Function
'Test
WScript.StdOut.WriteLine IsDirEmpty("C:\Temp")
WScript.StdOut.WriteLine IsDirEmpty("C:\Temp\test")
- Output:
False True
V (Vlang)
import os
fn main() {
println(is_empty_dir('../Check'))
}
fn is_empty_dir(name string) string {
if os.is_dir(name) == false {return 'Directory name not exist!'}
if os.is_dir(name) && os.is_dir_empty(name) == true {return 'Directory exists and is empty!'}
return 'Directory not empty!'
}
Wren
import "io" for Directory
var isEmptyDir = Fn.new { |path|
if (!Directory.exists(path)) Fiber.abort("Directory at '%(path)' does not exist.")
return Directory.list(path).count == 0
}
var path = "test"
var empty = isEmptyDir.call(path)
System.print("'%(path)' is %(empty ? "empty" : "not empty")")
- Output:
'test' is an empty directory I made earlier.
'test' is empty
zkl
path:="Empty"; File.isDir(path).println();
File.mkdir(path); File.isDir(path).println();
File.glob(path+"/*").println(); // show contents of directory
- Output:
False True L()
- Programming Tasks
- Solutions by Programming Task
- 11l
- 8086 Assembly
- Ada
- ALGOL 68
- Arturo
- AutoHotkey
- AWK
- BASIC
- BaCon
- Batch File
- BBC BASIC
- C
- C sharp
- C++
- Boost
- Clojure
- CoffeeScript
- Common Lisp
- D
- Delphi
- System.SysUtils
- System.IOUtils
- Elixir
- Erlang
- F Sharp
- Factor
- FreeBASIC
- FutureBasic
- Gambas
- Go
- Groovy
- Haskell
- Unicon
- J
- Java
- JavaScript
- Julia
- Kotlin
- Lasso
- Liberty BASIC
- Lingo
- Lua
- Maple
- Mathematica
- Wolfram Language
- MATLAB
- Octave
- Min
- MS-DOS
- Nanoquery
- Nemerle
- NewLISP
- Nim
- Objeck
- OCaml
- OoRexx
- PARI/GP
- Pascal
- Perl
- Phix
- PHP
- PicoLisp
- PowerShell
- Prolog
- PureBasic
- Python
- R
- Racket
- Raku
- REXX
- Ring
- RPL
- Ruby
- Run BASIC
- Rust
- Scala
- Seed7
- SenseTalk
- Sidef
- Standard ML
- Tcl
- UNIX Shell
- VBA
- VBScript
- V (Vlang)
- Wren
- Zkl
- ACL2/Omit
- TI-83 BASIC/Omit