Shift list elements to left by 3

Shift list elements to left by 3 is a draft programming task. It is not yet considered ready to be promoted as a complete task, for reasons that should be found in its talk page.

Task

Shift list elements to left by   3.

      shift  = [1,2,3,4,5,6,7,8,9]
      result = [4, 5, 6, 7, 8, 9, 1, 2, 3]

Ada

Using slices and array concatenation. <lang Ada>with Ada.Text_Io;

procedure Shift_Left is

  Shift_Count : constant := 3;

  type List_Type is array (Positive range <>) of Integer;

  procedure Put_List (List : List_Type) is
     use Ada.Text_Io;
  begin
     for V of List loop
        Put (V'Image); Put ("  ");
     end loop;
     New_Line;
  end Put_List;

  Shift : List_Type := (1, 2, 3, 4, 5, 6, 7, 8, 9);

begin

  Put_List (Shift);

  Shift :=
    Shift (Shift'First + Shift_Count .. Shift'Last) &
      Shift (Shift'First .. Shift_Count);

  Put_List (Shift);

end Shift_Left;</lang>

Output:

 1   2   3   4   5   6   7   8   9
 4   5   6   7   8   9   1   2   3

ALGOL 68

<lang algol68>BEGIN

   # shifts in place the elements of a left by n                          #
   PRIO <<:= = 1;
   OP   <<:= = ( REF[]INT a, INT n )REF[]INT:
        BEGIN
           INT    a length = ( UPB a - LWB a ) + 1;
           IF n < a length AND n > 0 THEN
               # the amount to shift is less than the length of the array #
               [ 1 : a length ]INT shifted;
               shifted[ 1                    : a length - n ] := a[ n + 1 :   @ 1 ];
               shifted[ ( a length + 1 ) - n :              ] := a[ 1     : n @ 1 ];
               a[ @ 1 ] := shifted
           FI;
           a
        END # <<:= # ;
   # prints the elements of v                                             #
   OP   PRINT = ( []INT v )VOID:
        BEGIN
           print( ( "[" ) );
           BOOL need comma := FALSE;
           FOR i FROM LWB v TO UPB v DO
               print( ( IF need comma THEN "," ELSE "" FI, whole( v[ i ], 0 ) ) );
               need comma := TRUE
           OD;
           print( ( "]" ) )
        END # PRINT # ;            
   [ 1 : 9 ]INT v := ( 1, 2, 3, 4, 5, 6, 7, 8, 9 );
   PRINT v;
   print( ( " -> " ) );
   v <<:= 3;
   PRINT v;
   print( ( newline ) )

END</lang>

Output:

[1,2,3,4,5,6,7,8,9] -> [4,5,6,7,8,9,1,2,3]

AppleScript

Functional

<lang applescript>------------- SHIFT LIST ELEMENTS TO LEFT BY 3 -----------

-- rotated :: Int -> [a] -> [a] on rotated(n, xs)

   set m to |mod|(n, length of xs)
   
   if 0 ≠ n then
       (items (1 + m) thru -1 of xs) & ¬
           (items 1 thru m of xs)
   else
       xs
   end if

end rotated

---

TEST -------------------------

on run

   set xs to {1, 2, 3, 4, 5, 6, 7, 8, 9}
   
   unlines({"     Input list: " & showList(xs), ¬
       " Rotated 3 left: " & showList(rotated(3, xs)), ¬
       "Rotated 3 right: " & showList(rotated(-3, xs))})

end run

---

GENERIC ------------------------

-- mod :: Int -> Int -> Int on |mod|(n, d)

   -- The built-in infix `mod` inherits the sign of the 
   -- *dividend* for non zero results. 
   -- (i.e. the 'rem' pattern in some languages).
   --
   -- This version inherits the sign of the *divisor*.
   -- (A more typical 'mod' pattern, and useful,
   -- for example, with biredirectional list rotations).
   if signum(n) = signum(-d) then
       (n mod d) + d
   else
       (n mod d)
   end if

end |mod|

-- signum :: Num -> Num on signum(x)

   if x < 0 then
       -1
   else if x = 0 then
       0
   else
       1
   end if

end signum

---

FORMATTING ----------------------

-- intercalate :: String -> [String] -> String on intercalate(delim, xs)

   set {dlm, my text item delimiters} to ¬
       {my text item delimiters, delim}
   set s to xs as text
   set my text item delimiters to dlm
   s

end intercalate

-- map :: (a -> b) -> [a] -> [b] on map(f, xs)

   -- The list obtained by applying f
   -- to each element of xs.
   tell mReturn(f)
       set lng to length of xs
       set lst to {}
       repeat with i from 1 to lng
           set end of lst to |λ|(item i of xs, i, xs)
       end repeat
       return lst
   end tell

end map

-- mReturn :: First-class m => (a -> b) -> m (a -> b) on mReturn(f)

   -- 2nd class handler function lifted into 1st class script wrapper. 
   if script is class of f then
       f
   else
       script
           property |λ| : f
       end script
   end if

end mReturn

-- showList :: [a] -> String on showList(xs)

   "{" & intercalate(", ", map(my str, xs)) & "}"

end showList

-- str :: a -> String on str(x)

   x as string

end str

-- unlines :: [String] -> String on unlines(xs)

   -- A single string formed by the intercalation
   -- of a list of strings with the newline character.
   set {dlm, my text item delimiters} to ¬
       {my text item delimiters, linefeed}
   set s to xs as text
   set my text item delimiters to dlm
   s

end unlines</lang>

Output:

     Input list: {1, 2, 3, 4, 5, 6, 7, 8, 9}
 Rotated 3 left: {4, 5, 6, 7, 8, 9, 1, 2, 3}
Rotated 3 right: {7, 8, 9, 1, 2, 3, 4, 5, 6}

---

Two in-place alternatives

Fewest moves: <lang applescript>(* List range rotation, in-place with temporary external storage. Negative 'amount' = left rotation, positive = right.

   Method:
       Adjust the specified amount to get a positive, < list length, left-rotation figure.
       Store the range's leftmost 'amount' items.
       Move the range's other items 'amount' places to the left.
       Move the stored items into the range's rightmost slots.

• )

on rotate(theList, l, r, amount)

   set listLength to (count theList)
   if (listLength < 2) then return
   if (l < 0) then set l to listLength + l + 1
   if (r < 0) then set r to listLength + r + 1
   if (l > r) then set {l, r} to {r, l}
   
   script o
       property lst : theList
       property storage : missing value
   end script
   
   set rangeLength to r - l + 1
   set amount to (rangeLength + rangeLength - amount) mod rangeLength
   if (amount is 0) then return
   set o's storage to o's lst's items l thru (l + amount - 1)
   repeat with i from (l + amount) to r
       set o's lst's item (i - amount) to o's lst's item i
   end repeat
   set j to r - amount
   repeat with i from 1 to amount
       set o's lst's item (j + i) to o's storage's item i
   end repeat

end rotate

-- Task code: local lst set lst to {1, 2, 3, 4, 5, 6, 7, 8, 9} -- Left-rotate all items (1 thru -1) by three places. rotate(lst, 1, -1, -3) return lst</lang>

Wholly in-place: <lang applescript>(* List range rotation, wholly in-place. Negative 'amount' = left rotation, positive = right.

   Method:
       Adjust the specified rotation amount to get a positive, < list length, left-rotation figure.
       If rotating by only 1 in either direction, do it in the obvious way.
       Otherwise reverse the range's leftmost 'amount' items, reverse the others, then reverse the lot.

• )

on rotate(theList, l, r, amount)

   set listLength to (count theList)
   if (listLength < 2) then return
   if (l < 0) then set l to listLength + l + 1
   if (r < 0) then set r to listLength + r + 1
   if (l > r) then set {l, r} to {r, l}
   
   script o
       property lst : theList
       
       on rotate1(a, z, step)
           set v to my lst's item a
           repeat with i from (a + step) to z by step
               set my lst's item (i - step) to my lst's item i
           end repeat
           set my lst's item z to v
       end rotate1
       
       on |reverse|(i, j)
           repeat with i from i to ((i + j - 1) div 2)
               set v to my lst's item i
               set my lst's item i to my lst's item j
               set my lst's item j to v
               set j to j - 1
           end repeat
       end |reverse|
   end script
   
   set rangeLength to r - l + 1
   set amount to (rangeLength + rangeLength - amount) mod rangeLength
   if (amount is 1) then
       tell o to rotate1(l, r, 1) -- Rotate left by 1.
   else if (amount = rangeLength - 1) then
       tell o to rotate1(r, l, -1) -- Rotate right by 1.
   else if (amount > 0) then
       tell o to |reverse|(l, l + amount - 1)
       tell o to |reverse|(l + amount, r)
       tell o to |reverse|(l, r)
   end if

end rotate

-- Task code: local lst set lst to {1, 2, 3, 4, 5, 6, 7, 8, 9} -- Left-rotate all items (1 thru -1) by three places. rotate(lst, 1, -1, -3) return lst</lang>

Result in both cases:

Output:

<lang applescript>{4, 5, 6, 7, 8, 9, 1, 2, 3}</lang>

AutoHotkey

<lang AutoHotkey>Shift_list_elements(Arr, dir, n){

   nums := Arr.Clone()
   loop % n
       if InStr(dir, "l")
           nums.Push(nums.RemoveAt(1))
       else
           nums.InsertAt(1, nums.RemoveAt(nums.count()))
   return nums

}</lang> Examples:<lang AutoHotkey>Arr  := [1,2,3,4,5,6,7,8,9] output1 := Shift_list_elements(Arr, "L", 3) output2 := Shift_list_elements(Arr, "R", 3) return</lang>

Output:

output1 = [4, 5, 6, 7, 8, 9, 1, 2, 3]
output2 = [7, 8, 9, 1, 2, 3, 4, 5, 6]

AWK

<lang AWK>

1. syntax: GAWK -f SHIFT_LIST_ELEMENTS_TO_LEFT_BY_3.AWK

BEGIN {

   list = "1,2,3,4,5,6,7,8,9"
   printf("old: %s\n",list)
   printf("new: %s\n",shift_left(list,3))
   list = "a;b;c;d"
   printf("old: %s\n",list)
   printf("new: %s\n",shift_left(list,1,";"))
   exit(0)

} function shift_left(str,n,sep, i,left,right) {

   if (sep == "") {
     sep = ","
   }
   for (i=1; i<=n; i++) {
     left = substr(str,1,index(str,sep)-1)
     right = substr(str,index(str,sep)+1)
     str = right sep left
   }
   return(str)

} </lang>

Output:

old: 1,2,3,4,5,6,7,8,9
new: 4,5,6,7,8,9,1,2,3
old: a;b;c;d
new: b;c;d;a

C

Translation of: Wren

<lang c>#include <stdio.h>

/* in place left shift by 1 */ void lshift(int *l, size_t n) {

   int i, f;
   if (n < 2) return;
   f = l[0];
   for (i = 0; i < n-1; ++i) l[i] = l[i+1];
   l[n-1] = f;

}

int main() {

   int l[] = {1, 2, 3, 4, 5, 6, 7, 8, 9};
   int i;
   size_t n = 9;
   printf("Original list     : ");
   for (i = 0; i < n; ++i) printf("%d ", l[i]);
   printf("\nShifted left by 3 : ");
   for (i = 0; i < 3; ++i) lshift(l, n);
   for (i = 0; i < n; ++i) printf("%d ", l[i]);
   printf("\n");
   return 0;

}</lang>

Output:

Original list     : 1 2 3 4 5 6 7 8 9 
Shifted left by 3 : 4 5 6 7 8 9 1 2 3 

C++

<lang cpp>#include <algorithm>

1. include <iostream>
2. include <iterator>
3. include <vector>

template <typename T> void print(const std::vector<T>& v) {

   std::copy(v.begin(), v.end(), std::ostream_iterator<T>(std::cout, " "));
   std::cout << '\n';

}

int main() {

   std::vector<int> vec{1, 2, 3, 4, 5, 6, 7, 8, 9};
   std::cout << "Before: ";
   print(vec);
   std::rotate(vec.begin(), vec.begin() + 3, vec.end());
   std::cout << " After: ";
   print(vec);

}</lang>

Output:

Before: 1 2 3 4 5 6 7 8 9 
 After: 4 5 6 7 8 9 1 2 3 

Common Lisp

<lang lisp>;; Load the alexandria library from the quicklisp repository CL-USER> (ql:quickload "alexandria")

CL-USER> (alexandria:rotate '(1 2 3 4 5 6 7 8 9) -3) (4 5 6 7 8 9 1 2 3)</lang>

Delphi

Library: System.SysUtils

Library: Boost.Int

Boost.Int is part of DelphiBoostLib. <lang Delphi> program Shift_list_elements_to_left_by_3;

{$APPTYPE CONSOLE}

uses

 System.SysUtils,
 Boost.Int;

var

 List: TArray<Integer>;

begin

 List := [1, 2, 3, 4, 5, 6, 7, 8, 9];
 writeln('Original list     :', list.ToString);
 List.shift(3);
 writeln('Shifted left by 3 :', list.ToString);
 Readln;

end.</lang>

Output:

Original list     :[1, 2, 3, 4, 5, 6, 7, 8, 9]
Shifted left by 3 :[4, 5, 6, 7, 8, 9, 1, 2, 3]

Excel

LAMBDA

Binding the name rotatedRow to the following lambda expression in the Name Manager of the Excel WorkBook:

(See LAMBDA: The ultimate Excel worksheet function)

Works with: Office 365 betas 2021

<lang lisp>rotatedRow =LAMBDA(n,

   LAMBDA(xs,
       LET(
           nCols, COLUMNS(xs),
           m, MOD(n, nCols),
           x, SEQUENCE(
               1, nCols,
               1, 1
           ),
           d, nCols - m,

           IF(x > d,
               x - d,
               m + x
           )
       )
   )

)</lang>

Output:

The formula in cell B2 defines an array which populates the whole range B2:J2

	fx	=rotatedRow(3)(B1#)
	A	B	C	D	E	F	G	H	I	J
1	List	1	2	3	4	5	6	7	8	9
2	Rotated	4	5	6	7	8	9	1	2	3

F#

<lang fsharp> // Nigel Gallowy. March 29th., 2021 let fN=function _::_::_::n->n |_->raise(System.Exception("List has fewer than 3 elements")) [[1..10];[1;2];[1;2;3]]|>Seq.iter(fun n->try printfn "%A->%A" n (fN n) with :? System.Exception as e->printfn "oops -> %s" (e.Message)) </lang>

Output:

[1; 2; 3; 4; 5; 6; 7; 8; 9; 10]->[4; 5; 6; 7; 8; 9; 10]
oops -> List has fewer than 3 elements
[1; 2; 3]->[]

Factor

<lang factor> USING: prettyprint sequences.extras ;

{ 1 2 3 4 5 6 7 8 9 } 3 rotate .</lang>

Output:

{ 4 5 6 7 8 9 1 2 3 }

You can also make a virtual rotated sequence. In other words, the underlying array remains the same, but the way it is indexed has been changed.

<lang factor>USING: arrays prettyprint sequences.rotated ;

{ 1 2 3 4 5 6 7 8 9 } 3 <rotated> >array .</lang>

Output:

{ 4 5 6 7 8 9 1 2 3 }

FreeBASIC

<lang freebasic>sub shift_left( list() as integer )

   'shifts list left by one step
   dim as integer lo = lbound(list), hi = ubound(list), first
   first = list(lo)
   for i as integer = lo to hi
       list(i) = list(i+1)
   next i
   list(hi) = first
   return

end sub

sub shift_left_n( list() as integer, n as uinteger )

   for i as uinteger = 1 to n
       shift_left( list() )
   next i
   return

end sub

dim as integer list(1 to 9) = {1,2,3,4,5,6,7,8,9} shift_left_n( list(), 3 ) for i as integer = 1 to 9

   print list(i);
   if i<9 then print ", ";

next i</lang>

Output:

4, 5, 6, 7, 8, 9, 1, 2, 3

Go

Translation of: Wren

<lang go>package main

import "fmt"

// in place left shift by 1 func lshift(l []int) {

   n := len(l)
   if n < 2 {
       return
   }
   f := l[0]
   for i := 0; i < n-1; i++ {
       l[i] = l[i+1]
   }
   l[n-1] = f

}

func main() {

   l := []int{1, 2, 3, 4, 5, 6, 7, 8, 9}
   fmt.Println("Original list     :", l)
   for i := 0; i < 3; i++ {
       lshift(l)
   }
   fmt.Println("Shifted left by 3 :", l)

}</lang>

Output:

Original list     : [1 2 3 4 5 6 7 8 9]
Shifted left by 3 : [4 5 6 7 8 9 1 2 3]

Haskell

<lang haskell>------------- SHIFT LIST ELEMENTS TO LEFT BY N -----------

rotated :: Int -> [a] -> [a] rotated n xs =

 take <*> (flip drop (cycle xs) . mod n) $ length xs
 

---

TEST -------------------------

main :: IO () main =

 let xs = [1 .. 9]
  in putStrLn "List rotated 3 positions to the left:"
       >> print (rotated 3 xs)
       >> print (rotated 30 xs)
       >> putStrLn "\nList rotated 3 positions to the right:"
       >> print (rotated (-3) xs)
       >> print (rotated (-30) xs)</lang>

Output:

List rotated 3 positions to the left:
[4,5,6,7,8,9,1,2,3]
[4,5,6,7,8,9,1,2,3]

List rotated 3 positions to the right:
[7,8,9,1,2,3,4,5,6]
[7,8,9,1,2,3,4,5,6]

Java

<lang java>import java.util.List; import java.util.Arrays; import java.util.Collections;

public class RotateLeft {

   public static void main(String[] args) {
       List<Integer> list = Arrays.asList(1, 2, 3, 4, 5, 6, 7, 8, 9);
       System.out.println("original: " + list);
       Collections.rotate(list, -3);
       System.out.println("rotated: " + list);
   }

} </lang>

Output:

original: [1, 2, 3, 4, 5, 6, 7, 8, 9]
rotated: [4, 5, 6, 7, 8, 9, 1, 2, 3]

JavaScript

<lang javascript>(() => {

   "use strict";

   // -------- SHIFT LIST ELEMENTS TO LEFT BY 3 ---------

   // rotated :: Int -> [a] -> [a]
   const rotated = n =>
       // A rotation, n elements to the left,
       // of the input list.
       xs => 0 !== n ? (() => {
           const m = mod(n)(xs.length);

           return xs.slice(m).concat(
               xs.slice(0, m)
           );
       })() : Array.from(xs);

   // ---------------------- TEST -----------------------
   // main :: IO ()
   const main = () => {
       const xs = [1, 2, 3, 4, 5, 6, 7, 8, 9];

       return [
               `    The input list: ${show(xs)}`,
               ` rotated 3 to left: ${show(rotated(3)(xs))}`,
               `     or 3 to right: ${show(rotated(-3)(xs))}`
           ]
           .join("\n");
   };

   // --------------------- GENERIC ---------------------

   // mod :: Int -> Int -> Int
   const mod = n =>
       // Inherits the sign of the *divisor* for non zero
       // results. Compare with `rem`, which inherits
       // the sign of the *dividend*.
       d => (n % d) + (
           signum(n) === signum(-d) ? (
               d
           ) : 0
       );

   // signum :: Num -> Num
   const signum = n =>
       0 > n ? (
           -1
       ) : (
           0 < n ? 1 : 0
       );

   // show :: a -> String
   const show = x =>
       JSON.stringify(x);

   // MAIN ---
   return main();

})();</lang>

Output:

    The input list: [1,2,3,4,5,6,7,8,9]
 rotated 3 to left: [4,5,6,7,8,9,1,2,3]
     or 3 to right: [7,8,9,1,2,3,4,5,6]

jq

Works with: jq

Works with gojq, the Go implementation of jq <lang jq># input should be an array or string def rotateLeft($n):

  .[$n:] + .[:$n];</lang>

Examples:

[1, 2, 3, 4, 5, 6, 7, 8, 9] | rotateLeft(3) #=> [4,5,6,7,8,9,1,2,3]

"123456789" | rotateLeft(3) #=> "456789123"

Julia

<lang julia>list = [1, 2, 3, 4, 5, 6, 7, 8, 9] println(list, " => ", circshift(list, -3))

</lang>

Output:

[1, 2, 3, 4, 5, 6, 7, 8, 9] => [4, 5, 6, 7, 8, 9, 1, 2, 3]

Mathematica/Wolfram Language

<lang Mathematica>RotateLeft[{1, 2, 3, 4, 5, 6, 7, 8, 9}, 3]</lang>

Output:

{4, 5, 6, 7, 8, 9, 1, 2, 3}

Nim

Using “rotatedLeft” from standard module “algorithm”. Note that its exists also “rotateLeft” for rotation in place.

<lang Nim>import algorithm

let list = @[1, 2, 3, 4, 5, 6, 7, 8, 9] echo list, " → ", rotatedLeft(list, 3)</lang>

Output:

@[1, 2, 3, 4, 5, 6, 7, 8, 9] → @[4, 5, 6, 7, 8, 9, 1, 2, 3]

Perl

<lang perl>// 20210315 Perl programming solution

use strict; use warnings;

my $n = 3; my @list = 1..9;

push @list, splice @list, 0, $n;

print join ' ', @list, "\n"</lang>

Output:

4 5 6 7 8 9 1 2 3

Phix

sequence s = {1,2,3,4,5,6,7,8,9}
s = s[4..$]&s[1..3]
?s

Output:

{4,5,6,7,8,9,1,2,3}

Python

<lang python>def rotate(list, n):

   for _ in range(n):
       list.append(list.pop(0))

   return list

1. or, supporting opposite direction rotations:

def rotate(list, n):

   k = (len(list) + n) % len(list)
   return list[k::] + list[:k:]

list = [1,2,3,4,5,6,7,8,9] print(list, " => ", rotate(list, 3))

</lang>

Output:

[1, 2, 3, 4, 5, 6, 7, 8, 9]  =>  [4, 5, 6, 7, 8, 9, 1, 2, 3]

and we can also define rotated lists and ranges as slices taken from an infinite cycle of their values, after n initial items have been dropped:

<lang python>Shift list elements to left by 3

from itertools import cycle, islice

1. rotated :: Int -> [a] -> [a]

def rotated(n):

   A list rotated n elements to the left.
   def go(xs):
       lng = len(xs)
       stream = cycle(xs)

       # (n modulo lng) elements dropped from the start,
       list(islice(stream, n % lng))

       # and lng elements drawn from the remaining cycle.
       return list(islice(stream, lng))
   return go

1. ------------------------- TEST -------------------------
2. main :: IO ()

def main():

   Positive and negative (left and right)
      rotations tested for list and range inputs.
   
   xs = [1, 2, 3, 4, 5, 6, 7, 8, 9]

   print("List rotated 3 positions to the left:")
   print(
       rotated(3)(xs)
   )
   print("List rotated 3 positions to the right:")
   print(
       rotated(-3)(xs)
   )
   print("\nLists obtained by rotations of an input range:")
   rng = range(1, 1 + 9)
   print(
       rotated(3)(rng)
   )
   print(
       rotated(-3)(rng)
   )

1. MAIN ---

if __name__ == '__main__':

   main()</lang>

Output:

List rotated 3 positions to the left:
[4, 5, 6, 7, 8, 9, 1, 2, 3]
List rotated 3 positions to the right:
[7, 8, 9, 1, 2, 3, 4, 5, 6]

Lists obtained by rotations of an input range:
[4, 5, 6, 7, 8, 9, 1, 2, 3]
[7, 8, 9, 1, 2, 3, 4, 5, 6]

Quackery

<lang Quackery>' [ 1 2 3 4 5 6 7 8 9 ] 3 split swap join echo</lang>

Output:

[ 4 5 6 7 8 9 1 2 3 ]

Raku

<lang perl6># 20210315 Raku programming solution

say [1..9].rotate(3)</lang>

Output:

(4 5 6 7 8 9 1 2 3)

REXX

<lang rexx>/*REXX program shifts (using a rotate) elements in a list left by some number N. */ parse arg n $ . /*obtain optional arguments from the CL*/ if n== | n=="," then n= 3 /*Not specified? Then use the default.*/ if $== | $=="," then $= '[1,2,3,4,5,6,7,8,9]' /* " " " " " " */

$$= space( translate($, , '],[') ) /*convert literal list to bare list. */ $$= '['translate( subword($$, N+1) subword($$, 1, n), ',', " ")']' /*rotate the list.*/

say 'shifting elements in the list by ' n /*display action used on the input list*/ say ' input list=' $ /* " the input list ───► terminal*/ say 'output list=' $$ /* " the output " " " */</lang>

output   when using the default inputs:

shifting elements in the list by  3
 input list= [1,2,3,4,5,6,7,8,9]
output list= [4,5,6,7,8,9,1,2,3]

Ring

<lang ring> see "working..." + nl

shift = [1,2,3,4,5,6,7,8,9] lenshift = len(shift) shiftNew = list(lenshift) nshift = 3 temp = list(nshift)

see "original list:" + nl showArray(shift) see nl + "Shifted left by 3:" + nl

for n = 1 to nshift

   temp[n] = shift[n]

next

for n = 1 to lenshift - nshift

   shiftNew[n] = shift[n+nshift]

next

for n = lenshift-nshift+1 to lenshift

   shiftNew[n] = temp[n-lenshift+nshift]

next

showArray(shiftNew)

see nl + "done..." + nl

func showArray(array)

    txt = "["
    for n = 1 to len(array)
        txt = txt + array[n] + ", "
    next
    txt = left(txt,len(txt)-2)
    txt = txt + "]"
    see txt

</lang>

Output:

working...
original list:
[1, 2, 3, 4, 5, 6, 7, 8, 9]
shifted left by 3:
[4, 5, 6, 7, 8, 9, 1, 2, 3]
done...

Ruby

Note, unlike some other languages, for Ruby's Array.rotate() method, a positive number means rotate to the left, while a negative number means rotate to the right. Use Array.rotate!() if you wish to mutate the original array rather than return a new one. <lang ruby>list = [1,2,3,4,5,6,7,8,9] p list.rotate(3)

</lang>

Output:

[4, 5, 6, 7, 8, 9, 1, 2, 3]

Rust

<lang rust>fn main() {

   let mut v = vec![1, 2, 3, 4, 5, 6, 7, 8, 9];
   println!("Before: {:?}", v);
   v.rotate_left(3);
   println!(" After: {:?}", v);

}</lang>

Output:

Before: [1, 2, 3, 4, 5, 6, 7, 8, 9]
 After: [4, 5, 6, 7, 8, 9, 1, 2, 3]

Wren

<lang ecmascript>// in place left shift by 1 var lshift = Fn.new { |l|

   var n = l.count
   if (n < 2) return
   var f = l[0]
   for (i in 0..n-2) l[i] = l[i+1]
   l[-1] = f

}

var l = (1..9).toList System.print("Original list  : %(l)") for (i in 1..3) lshift.call(l) System.print("Shifted left by 3 : %(l)")</lang>

Output:

Original list     : [1, 2, 3, 4, 5, 6, 7, 8, 9]
Shifted left by 3 : [4, 5, 6, 7, 8, 9, 1, 2, 3]