Monads/Writer monad: Difference between revisions
m (→{{header|Factor}}: formatting) |
(Add Nim) |
||
Line 660: | Line 660: | ||
Added one : 3.23606797749979 |
Added one : 3.23606797749979 |
||
Divided by two : 1.618033988749895 |
Divided by two : 1.618033988749895 |
||
</pre> |
|||
=={{header|Nim}}== |
|||
<lang Nim>from math import sqrt |
|||
from sugar import `=>` |
|||
type |
|||
WriterUnit = (float, string) |
|||
WriterBind = proc(a: WriterUnit): WriterUnit |
|||
proc bindWith(f: proc(x: float): float; log: string): WriterBind = |
|||
result = (proc(a: WriterUnit): WriterUnit = |
|||
(f(a[0]), a[1] & log) |
|||
) |
|||
var |
|||
logRoot = sqrt.bindWith "obtained square root, " |
|||
logAddOne = ((x: float) => x+1'f).bindWith "added 1, " |
|||
logHalf = ((x: float) => x/2'f).bindWith "divided by 2, " |
|||
echo (5.0, "").logRoot.logAddOne.logHalf |
|||
</lang> |
|||
{{out}} |
|||
<pre> |
|||
(1.618033988749895, "obtained square root, added 1, divided by 2, ") |
|||
</pre> |
</pre> |
||
Revision as of 04:16, 25 October 2019
The Writer monad is a programming design pattern which makes it possible to compose functions which return their result values paired with a log string. The final result of a composed function yields both a value, and a concatenation of the logs from each component function application.
Demonstrate in your programming language the following:
- Construct a Writer monad by writing the 'bind' function and the 'unit' (sometimes known as 'return') function for that monad (or just use what the language already provides)
- Write three simple functions: root, addOne, and half
- Derive Writer monad versions of each of these functions
- Apply a composition of the Writer versions of root, addOne, and half to the integer 5, deriving both a value for the Golden Ratio φ, and a concatenated log of the function applications (starting with the initial value, and followed by the application of root, etc.)
ALGOL 68
<lang algol68>BEGIN
MODE MWRITER = STRUCT( LONG REAL value , STRING log ); PRIO BIND = 9; OP BIND = ( MWRITER m, PROC( LONG REAL )MWRITER f )MWRITER: ( MWRITER n := f( value OF m ); log OF n := log OF m + log OF n; n );
OP LEN = ( STRING s )INT: ( UPB s + 1 ) - LWB s; PRIO PAD = 9; OP PAD = ( STRING s, INT width )STRING: IF LEN s >= width THEN s ELSE s + ( width - LEN s ) * " " FI;
PROC unit = ( LONG REAL v, STRING s )MWRITER: ( v, " " + s PAD 17 + ":" + fixed( v, -19, 15 ) + REPR 10 ); PROC root = ( LONG REAL v )MWRITER: unit( long sqrt( v ), "Took square root" ); PROC add one = ( LONG REAL v )MWRITER: unit( v+1, "Added one" ); PROC half = ( LONG REAL v )MWRITER: unit( v/2, "Divided by two" ); MWRITER mw2 := unit( 5, "Initial value" ) BIND root BIND add one BIND half; print( ( "The Golden Ratio is", fixed( value OF mw2, -19, 15 ), newline ) ); print( ( newline, "This was derived as follows:-", newline ) ); print( ( log OF mw2 ) )
END</lang>
- Output:
The Golden Ratio is 1.618033988749895 This was derived as follows:- Initial value : 5.000000000000000 Took square root : 2.236067977499790 Added one : 3.236067977499790 Divided by two : 1.618033988749895
AppleScript
More than a light-weight scripting language is really likely to need, but a way of stretching it a bit, and understanding its relationship to other languages. What AppleScript mainly lacks (apart from a well-developed library, and introspective records/dictionaries which know what keys/fields they have), is a coherent type of first class (and potentially anonymous) function. To get first class objects, we have to wrap 2nd class handlers in 1st class scripts.
<lang AppleScript>-- WRITER MONAD FOR APPLESCRIPT
-- How can we compose functions which take simple values as arguments -- but return an output value which is paired with a log string ?
-- We can prevent functions which expect simple values from choking -- on log-wrapped output (from nested functions) -- by writing Unit/Return() and Bind() for the Writer monad in AppleScript
on run {}
-- Derive logging versions of three simple functions, pairing -- each function with a particular comment string -- (a -> b) -> (a -> (b, String)) set wRoot to writerVersion(root, "obtained square root") set wSucc to writerVersion(succ, "added one") set wHalf to writerVersion(half, "divided by two") loggingHalfOfRootPlusOne(5)
--> value + log string
end run
-- THREE SIMPLE FUNCTIONS
on root(x)
x ^ (1 / 2)
end root
on succ(x)
x + 1
end succ
on half(x)
x / 2
end half
-- DERIVE A LOGGING VERSION OF A FUNCTION BY COMBINING IT WITH A -- LOG STRING FOR THAT FUNCTION -- (SEE 'on run()' handler at top of script) -- (a -> b) -> String -> (a -> (b, String)) on writerVersion(f, strComment)
script on call(x) {value:sReturn(f)'s call(x), comment:strComment} end call end script
end writerVersion
-- DEFINE A COMPOSITION OF THE SAFE VERSIONS
on loggingHalfOfRootPlusOne(x)
logCompose([my wHalf, my wSucc, my wRoot], x)
end loggingHalfOfRootPlusOne
-- Monadic UNIT/RETURN and BIND functions for the writer monad
on writerUnit(a)
try set strValue to ": " & a as string on error set strValue to "" end try {value:a, comment:"Initial value" & strValue}
end writerUnit
on writerBind(recWriter, wf)
set recB to wf's call(value of recWriter) set v to value of recB try set strV to " -> " & (v as string) on error set strV to "" end try {value:v, comment:(comment of recWriter) & linefeed & (comment of recB) & strV}
end writerBind
-- THE TWO HIGHER ORDER FUNCTIONS ABOVE ENABLE COMPOSITION OF -- THE LOGGING VERSIONS OF EACH FUNCTION on logCompose(lstFunctions, varValue)
reduceRight(lstFunctions, writerBind, writerUnit(varValue))
end logCompose
-- xs: list, f: function, a: initial accumulator value -- the arguments available to the function f(a, x, i, l) are -- v: current accumulator value -- x: current item in list -- i: [ 1-based index in list ] optional -- l: [ a reference to the list itself ] optional on reduceRight(xs, f, a)
set sf to sReturn(f) repeat with i from length of xs to 1 by -1 set a to sf's call(a, item i of xs, i, xs) end repeat
end reduceRight
-- Unit/Return and bind for composing handlers in script wrappers -- lift 2nd class function into 1st class wrapper -- handler function --> first class script object on sReturn(f)
script property call : f end script
end sReturn
-- return a new script in which function g is composed -- with the f (call()) of the Mf script -- Mf -> (f -> Mg) -> Mg on sBind(mf, g)
script on call(x) sReturn(g)'s call(mf's call(x)) end call end script
end sBind</lang>
- Output:
{ value:1.61803398875, comment:"Initial value: 5\n obtained square root -> 2.2360679775\n added one -> 3.2360679775\n divided by two -> 1.61803398875" }
EchoLisp
Our monadic Writer elements will be pairs (string . value), where string is the log string.
<lang scheme> (define (Writer.unit x (log #f)) (if log (cons log x) (cons (format "init → %d" x) x)))
- f is a lisp function
- (Writer.lift f) returns a Writer function which returns a Writer element
(define (Writer.lift f name) (lambda(elem)
(Writer.unit (f (rest elem)) (format "%a \n %a → %a" (first elem) name (f (rest elem))))))
- lifts and applies
(define (Writer.bind f elem) ((Writer.lift f (string f)) elem))
(define (Writer.print elem) (writeln 'result (rest elem)) (writeln (first elem)))
- Writer monad versions
(define w-root (Writer.lift sqrt "root")) (define w-half (Writer.lift (lambda(x) (// x 2)) "half")) (define w-inc ( Writer.lift add1 "add-one"))
- no binding required, as we use Writer lifted functions
(-> 5 Writer.unit w-root w-inc w-half Writer.print)
result 1.618033988749895 init → 5 root → 2.23606797749979 add-one → 3.23606797749979 half → 1.618033988749895
- binding
(->> 0 Writer.unit (Writer.bind sin) (Writer.bind cos) w-inc w-half Writer.print)
result 1 init → 0 sin → 0 cos → 1 add-one → 2 half → 1 </lang>
Factor
Factor comes with an implementation of Haskell-style monads in the monads
vocabulary.
<lang factor>USING: kernel math math.functions monads prettyprint ; FROM: monads => do ;
{
[ 5 "Started with five, " <writer> ] [ sqrt "took square root, " <writer> ] [ 1 + "added one, " <writer> ] [ 2 / "divided by two." <writer> ]
} do .</lang>
- Output:
T{ writer { value 1.618033988749895 } { log "Started with five, took square root, added one, divided by two." } }
Go
<lang go>package main
import (
"fmt" "math"
)
type mwriter struct {
value float64 log string
}
func (m mwriter) bind(f func(v float64) mwriter) mwriter {
n := f(m.value) n.log = m.log + n.log return n
}
func unit(v float64, s string) mwriter {
return mwriter{v, fmt.Sprintf(" %-17s: %g\n", s, v)}
}
func root(v float64) mwriter {
return unit(math.Sqrt(v), "Took square root")
}
func addOne(v float64) mwriter {
return unit(v+1, "Added one")
}
func half(v float64) mwriter {
return unit(v/2, "Divided by two")
}
func main() {
mw1 := unit(5, "Initial value") mw2 := mw1.bind(root).bind(addOne).bind(half) fmt.Println("The Golden Ratio is", mw2.value) fmt.Println("\nThis was derived as follows:-") fmt.Println(mw2.log)
}</lang>
- Output:
The Golden Ratio is 1.618033988749895 This was derived as follows:- Initial value : 5 Took square root : 2.23606797749979 Added one : 3.23606797749979 Divided by two : 1.618033988749895
Haskell
Haskell has the built-in Monad
type class, and a built-in Writer
monad (as well as the more general WriterT
monad transformer that can make a writer monad with an underlying computation that is also a monad) already conforms to the Monad
type class.
Making a logging version of functions (unfortunately, if we use the built-in writer monad we cannot get the values into the logs when binding): <lang haskell>import Control.Monad.Trans.Writer import Control.Monad ((>=>))
loggingVersion :: (a -> b) -> c -> a -> Writer c b loggingVersion f log x = writer (f x, log)
logRoot = loggingVersion sqrt "obtained square root, " logAddOne = loggingVersion (+1) "added 1, " logHalf = loggingVersion (/2) "divided by 2, "
halfOfAddOneOfRoot = logRoot >=> logAddOne >=> logHalf
main = print $ runWriter (halfOfAddOneOfRoot 5)</lang>
- Output:
(1.618033988749895,"obtained square root, added 1, divided by 2, ")
J
Based on javascript implementation:
<lang J>root=: %: incr=: >: half=: -:
tostr=: ,@":
loggingVersion=: conjunction define
n;~u
)
Lroot=: root loggingVersion 'obtained square root' Lincr=: incr loggingVersion 'added 1' Lhalf=: half loggingVersion 'divided by 2'
loggingUnit=: verb define
y;'Initial value: ',tostr y
)
loggingBind=: adverb define
r=. u 0{::y v=. 0{:: r v;(1{::y),LF,(1{::r),' -> ',tostr v
)
loggingCompose=: dyad define
;(dyad def '<x`:6 loggingBind;y')/x,<loggingUnit y
)</lang>
Task example:
<lang J> 0{::Lhalf`Lincr`Lroot loggingCompose 5 1.61803
1{::Lhalf`Lincr`Lroot loggingCompose 5
Initial value: 5 obtained square root -> 2.23607 added 1 -> 3.23607 divided by 2 -> 1.61803</lang>
JavaScript
ES5
<lang JavaScript>(function () {
'use strict';
// START WITH THREE SIMPLE FUNCTIONS
// Square root of a number more than 0 function root(x) { return Math.sqrt(x); }
// Add 1 function addOne(x) { return x + 1; }
// Divide by 2 function half(x) { return x / 2; }
// DERIVE LOGGING VERSIONS OF EACH FUNCTION
function loggingVersion(f, strLog) { return function (v) { return { value: f(v), log: strLog }; } }
var log_root = loggingVersion(root, "obtained square root"),
log_addOne = loggingVersion(addOne, "added 1"),
log_half = loggingVersion(half, "divided by 2");
// UNIT/RETURN and BIND for the the WRITER MONAD
// The Unit / Return function for the Writer monad: // 'Lifts' a raw value into the wrapped form // a -> Writer a function writerUnit(a) { return { value: a, log: "Initial value: " + JSON.stringify(a) }; }
// The Bind function for the Writer monad: // applies a logging version of a function // to the contents of a wrapped value // and return a wrapped result (with extended log)
// Writer a -> (a -> Writer b) -> Writer b function writerBind(w, f) { var writerB = f(w.value), v = writerB.value;
return { value: v, log: w.log + '\n' + writerB.log + ' -> ' + JSON.stringify(v) }; }
// USING UNIT AND BIND TO COMPOSE LOGGING FUNCTIONS
// We can compose a chain of Writer functions (of any length) with a simple foldr/reduceRight // which starts by 'lifting' the initial value into a Writer wrapping, // and then nests function applications (working from right to left) function logCompose(lstFunctions, value) { return lstFunctions.reduceRight( writerBind, writerUnit(value) ); }
var half_of_addOne_of_root = function (v) { return logCompose( [log_half, log_addOne, log_root], v ); };
return half_of_addOne_of_root(5);
})();</lang>
- Output:
{ "value":1.618033988749895, "log":"Initial value: 5\n obtained square root -> 2.23606797749979\n added 1 -> 3.23606797749979\n divided by 2 -> 1.618033988749895" }
Jsish
From Javascript ES5 entry.
<lang javascript>'use strict';
/* writer monad, in Jsish */ function writerMonad() {
// START WITH THREE SIMPLE FUNCTIONS // Square root of a number more than 0 function root(x) { return Math.sqrt(x); } // Add 1 function addOne(x) { return x + 1; } // Divide by 2 function half(x) { return x / 2; } // DERIVE LOGGING VERSIONS OF EACH FUNCTION function loggingVersion(f, strLog) { return function (v) { return { value: f(v), log: strLog }; }; } var log_root = loggingVersion(root, "obtained square root"), log_addOne = loggingVersion(addOne, "added 1"), log_half = loggingVersion(half, "divided by 2"); // UNIT/RETURN and BIND for the the WRITER MONAD // The Unit / Return function for the Writer monad: // 'Lifts' a raw value into the wrapped form // a -> Writer a function writerUnit(a) { return { value: a, log: "Initial value: " + JSON.stringify(a) }; } // The Bind function for the Writer monad: // applies a logging version of a function // to the contents of a wrapped value // and return a wrapped result (with extended log) // Writer a -> (a -> Writer b) -> Writer b function writerBind(w, f) { var writerB = f(w.value), v = writerB.value; return { value: v, log: w.log + '\n' + writerB.log + ' -> ' + JSON.stringify(v) }; } // USING UNIT AND BIND TO COMPOSE LOGGING FUNCTIONS // We can compose a chain of Writer functions (of any length) with a simple foldr/reduceRight // which starts by 'lifting' the initial value into a Writer wrapping, // and then nests function applications (working from right to left) function logCompose(lstFunctions, value) { return lstFunctions.reduceRight( writerBind, writerUnit(value) ); }
var half_of_addOne_of_root = function (v) { return logCompose( [log_half, log_addOne, log_root], v ); };
return half_of_addOne_of_root(5);
}
var writer = writerMonad();
- writer.value;
- writer.log;
/*
!EXPECTSTART!
writer.value ==> 1.61803398874989 writer.log ==> Initial value: 5 obtained square root -> 2.23606797749979 added 1 -> 3.23606797749979 divided by 2 -> 1.61803398874989
!EXPECTEND!
- /</lang>
- Output:
prompt$ jsish -u writerMonad.jsi [PASS] writerMonad.jsi
Julia
<lang julia>struct Writer x::Real; msg::String; end
Base.show(io::IO, w::Writer) = print(io, w.msg, ": ", w.x)
unit(x, logmsg) = Writer(x, logmsg)
bind(f, fmsg, w) = unit(f(w.x), w.msg * ", " * fmsg)
f1(x) = 7x f2(x) = x + 8
a = unit(3, "after intialization") b = bind(f1, "after times 7 ", a) c = bind(f2, "after plus 8", b)
println("$a => $b => $c") println(bind(f2, "after plus 8", bind(f1, "after times 7", unit(3, "after intialization"))))
</lang>
- Output:
after intialization: 3 => after intialization, after times 7: 21 => after intialization, after times 7, after plus 8: 29 after intialization, after times 7, after plus 8: 29
Kotlin
<lang scala>// version 1.2.10
import kotlin.math.sqrt
class Writer<T : Any> private constructor(val value: T, s: String) {
var log = " ${s.padEnd(17)}: $value\n" private set
fun bind(f: (T) -> Writer<T>): Writer<T> { val new = f(this.value) new.log = this.log + new.log return new }
companion object { fun <T : Any> unit(t: T, s: String) = Writer<T>(t, s) }
}
fun root(d: Double) = Writer.unit(sqrt(d), "Took square root")
fun addOne(d: Double) = Writer.unit(d + 1.0, "Added one")
fun half(d: Double) = Writer.unit(d / 2.0, "Divided by two")
fun main(args: Array<String>) {
val iv = Writer.unit(5.0, "Initial value") val fv = iv.bind(::root).bind(::addOne).bind(::half) println("The Golden Ratio is ${fv.value}") println("\nThis was derived as follows:-\n${fv.log}")
}</lang>
- Output:
The Golden Ratio is 1.618033988749895 This was derived as follows:- Initial value : 5.0 Took square root : 2.23606797749979 Added one : 3.23606797749979 Divided by two : 1.618033988749895
Nim
<lang Nim>from math import sqrt from sugar import `=>`
type
WriterUnit = (float, string) WriterBind = proc(a: WriterUnit): WriterUnit
proc bindWith(f: proc(x: float): float; log: string): WriterBind =
result = (proc(a: WriterUnit): WriterUnit = (f(a[0]), a[1] & log) )
var
logRoot = sqrt.bindWith "obtained square root, " logAddOne = ((x: float) => x+1'f).bindWith "added 1, " logHalf = ((x: float) => x/2'f).bindWith "divided by 2, "
echo (5.0, "").logRoot.logAddOne.logHalf </lang>
- Output:
(1.618033988749895, "obtained square root, added 1, divided by 2, ")
zkl
<lang zkl>class Writer{
fcn init(x){ var X=x, logText=Data(Void," init \U2192; ",x.toString()) } fcn unit(text) { logText.append(text); self } fcn lift(f,name){ unit("\n %s \U2192; %s".fmt(name,X=f(X))) } fcn bind(f,name){ lift.fp(f,name) } fcn toString{ "Result = %s\n%s".fmt(X,logText.text) }
fcn root{ lift(fcn(x){ x.sqrt() },"root") } fcn half{ lift('/(2),"half") } fcn inc { lift('+(1),"inc") }
}</lang> <lang zkl>Writer(5.0).root().inc().half().println();</lang>
- Output:
Result = 1.61803 init → 5 root → 2.23607 inc → 3.23607 half → 1.61803
<lang zkl>w:=Writer(5.0); Utils.Helpers.fcomp(w.half,w.inc,w.root)(w).println(); // half(inc(root(w)))</lang>
- Output:
Result = 1.61803 init → 5 root → 2.23607 inc → 3.23607 half → 1.61803
Use bind to add functions to an existing Writer: <lang zkl>w:=Writer(5.0); root,inc,half := w.bind(fcn(x){ x.sqrt() },"root"), w.bind('+(1),"+ 1"), w.bind('/(2),"/ 2"); root(); inc(); half(); w.println();</lang>
- Output:
Result = 1.61803 init → 5 root → 2.23607 + 1 → 3.23607 / 2 → 1.61803