Addition chains
Addition chains is a draft programming task. It is not yet considered ready to be promoted as a complete task, for reasons that should be found in its talk page.
An addition chain of length r for n is a sequence 1 = a(0) < a(1) < a(2) ... < a(r) = n , such as a(k) = a(i) + a(j) ( i < k and j < k , i may be = j) . Each member is the sum of two earlier members, not necessarily distincts.
A Brauer chain for n is an addition chain where a(k) = a(k-1) + a(j) with j < k. Each member uses the previous member as a summand.
We are interested in chains of minimal length L(n).
Task
For each n in {7,14,21,29,32,42,64} display the following : L(n), the count of Brauer chains of length L(n), an example of such a Brauer chain, the count of non-brauer chains of length L(n), an example of such a chain. (NB: counts may be 0 ).
Extra-credit: Same task for n in {47, 79, 191, 382 , 379, 12509}
References
- OEIS sequences A079301, A079302. [1]
- Richard K. Guy - Unsolved problems in Number Theory - C6 - Addition chains.
Example
- minimal chain length l(19) = 6
- brauer-chains(19) : count = 31 Ex: ( 1 2 3 4 8 11 19)
- non-brauer-chains(19) : count = 2 Ex: ( 1 2 3 6 7 12 19)
11l
<lang 11l>F bauer(n)
V chain = [0] * n V in_chain = [0B] * (n + 1) [Int] best V best_len = n V cnt = 0
F extend_chain(Int x, Int =pos) -> N
I @best_len - pos < 32 & x < @n >> (@best_len - pos)
R
@chain[pos] = x
@in_chain[x] = 1B
pos++
I @in_chain[@n - x]
I pos == @best_len
@cnt++
E
@best = @chain[0 .< pos]
@best_len = pos
@cnt = 1
E I pos < @best_len
L(i) (pos - 1 .< -1).step(-1)
V c = x + @chain[i]
I c < @n
@extend_chain(c, pos)
@in_chain[x] = 0B
extend_chain(1, 0) R (best [+] [n], cnt)
L(n) [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]
V (best, cnt) = bauer(n)
print("L(#.) = #., count of minimum chain: #.\ne.g.: #.\n".format(n, best.len - 1, cnt, best))</lang>
- Output:
L(7) = 4, count of minimum chain: 5 e.g.: [1, 2, 4, 6, 7] L(14) = 5, count of minimum chain: 14 e.g.: [1, 2, 4, 8, 12, 14] L(21) = 6, count of minimum chain: 26 e.g.: [1, 2, 4, 8, 16, 20, 21] L(29) = 7, count of minimum chain: 114 e.g.: [1, 2, 4, 8, 16, 24, 28, 29] L(32) = 5, count of minimum chain: 1 e.g.: [1, 2, 4, 8, 16, 32] L(42) = 7, count of minimum chain: 78 e.g.: [1, 2, 4, 8, 16, 32, 40, 42] L(64) = 6, count of minimum chain: 1 e.g.: [1, 2, 4, 8, 16, 32, 64] L(47) = 8, count of minimum chain: 183 e.g.: [1, 2, 4, 8, 12, 13, 26, 39, 47] L(79) = 9, count of minimum chain: 492 e.g.: [1, 2, 4, 8, 16, 24, 26, 52, 78, 79] L(191) = 11, count of minimum chain: 7172 e.g.: [1, 2, 4, 8, 16, 32, 48, 52, 53, 106, 159, 191] L(382) = 11, count of minimum chain: 4 e.g.: [1, 2, 4, 8, 16, 17, 33, 50, 83, 166, 332, 382] L(379) = 12, count of minimum chain: 6583 e.g.: [1, 2, 4, 8, 16, 32, 64, 96, 104, 105, 210, 315, 379]
C
<lang c>#include <stdio.h>
- include <stdlib.h>
- include <string.h>
- define TRUE 1
- define FALSE 0
typedef int bool;
typedef struct {
int x, y;
} pair;
int* example = NULL; int exampleLen = 0;
void reverse(int s[], int len) {
int i, j, t;
for (i = 0, j = len - 1; i < j; ++i, --j) {
t = s[i];
s[i] = s[j];
s[j] = t;
}
}
pair tryPerm(int i, int pos, int seq[], int n, int len, int minLen);
pair checkSeq(int pos, int seq[], int n, int len, int minLen) {
pair p;
if (pos > minLen || seq[0] > n) {
p.x = minLen; p.y = 0;
return p;
}
else if (seq[0] == n) {
example = malloc(len * sizeof(int));
memcpy(example, seq, len * sizeof(int));
exampleLen = len;
p.x = pos; p.y = 1;
return p;
}
else if (pos < minLen) {
return tryPerm(0, pos, seq, n, len, minLen);
}
else {
p.x = minLen; p.y = 0;
return p;
}
}
pair tryPerm(int i, int pos, int seq[], int n, int len, int minLen) {
int *seq2;
pair p, res1, res2;
size_t size = sizeof(int);
if (i > pos) {
p.x = minLen; p.y = 0;
return p;
}
seq2 = malloc((len + 1) * size);
memcpy(seq2 + 1, seq, len * size);
seq2[0] = seq[0] + seq[i];
res1 = checkSeq(pos + 1, seq2, n, len + 1, minLen);
res2 = tryPerm(i + 1, pos, seq, n, len, res1.x);
free(seq2);
if (res2.x < res1.x)
return res2;
else if (res2.x == res1.x) {
p.x = res2.x; p.y = res1.y + res2.y;
return p;
}
else {
printf("Error in tryPerm\n");
p.x = 0; p.y = 0;
return p;
}
}
pair initTryPerm(int x, int minLen) {
int seq[1] = {1};
return tryPerm(0, 0, seq, x, 1, minLen);
}
void printArray(int a[], int len) {
int i;
printf("[");
for (i = 0; i < len; ++i) printf("%d ", a[i]);
printf("\b]\n");
}
bool isBrauer(int a[], int len) {
int i, j;
bool ok;
for (i = 2; i < len; ++i) {
ok = FALSE;
for (j = i - 1; j >= 0; j--) {
if (a[i-1] + a[j] == a[i]) {
ok = TRUE;
break;
}
}
if (!ok) return FALSE;
}
return TRUE;
}
bool isAdditionChain(int a[], int len) {
int i, j, k;
bool ok, exit;
for (i = 2; i < len; ++i) {
if (a[i] > a[i - 1] * 2) return FALSE;
ok = FALSE; exit = FALSE;
for (j = i - 1; j >= 0; --j) {
for (k = j; k >= 0; --k) {
if (a[j] + a[k] == a[i]) { ok = TRUE; exit = TRUE; break; }
}
if (exit) break;
}
if (!ok) return FALSE;
}
if (example == NULL && !isBrauer(a, len)) {
example = malloc(len * sizeof(int));
memcpy(example, a, len * sizeof(int));
exampleLen = len;
}
return TRUE;
}
void nextChains(int index, int len, int seq[], int *pcount) {
for (;;) {
int i;
if (index < len - 1) {
nextChains(index + 1, len, seq, pcount);
}
if (seq[index] + len - 1 - index >= seq[len - 1]) return;
seq[index]++;
for (i = index + 1; i < len - 1; ++i) {
seq[i] = seq[i-1] + 1;
}
if (isAdditionChain(seq, len)) (*pcount)++;
}
}
int findNonBrauer(int num, int len, int brauer) {
int i, count = 0;
int *seq = malloc(len * sizeof(int));
seq[0] = 1;
seq[len - 1] = num;
for (i = 1; i < len - 1; ++i) {
seq[i] = seq[i - 1] + 1;
}
if (isAdditionChain(seq, len)) count = 1;
nextChains(2, len, seq, &count);
free(seq);
return count - brauer;
}
void findBrauer(int num, int minLen, int nbLimit) {
pair p = initTryPerm(num, minLen);
int actualMin = p.x, brauer = p.y, nonBrauer;
printf("\nN = %d\n", num);
printf("Minimum length of chains : L(%d) = %d\n", num, actualMin);
printf("Number of minimum length Brauer chains : %d\n", brauer);
if (brauer > 0) {
printf("Brauer example : ");
reverse(example, exampleLen);
printArray(example, exampleLen);
}
if (example != NULL) {
free(example);
example = NULL;
exampleLen = 0;
}
if (num <= nbLimit) {
nonBrauer = findNonBrauer(num, actualMin + 1, brauer);
printf("Number of minimum length non-Brauer chains : %d\n", nonBrauer);
if (nonBrauer > 0) {
printf("Non-Brauer example : ");
printArray(example, exampleLen);
}
if (example != NULL) {
free(example);
example = NULL;
exampleLen = 0;
}
}
else {
printf("Non-Brauer analysis suppressed\n");
}
}
int main() {
int i;
int nums[12] = {7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379};
printf("Searching for Brauer chains up to a minimum length of 12:\n");
for (i = 0; i < 12; ++i) findBrauer(nums[i], 12, 79);
return 0;
}</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12: N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : [1 2 3 4 7] Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : [1 2 3 4 7 14] Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : [1 2 3 4 7 14 21] Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1 2 4 5 8 13 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : [1 2 3 4 7 11 18 29] Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1 2 3 6 9 11 18 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32] Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : [1 2 3 4 7 14 21 42] Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1 2 4 5 8 13 21 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32 64] Number of minimum length non-Brauer chains : 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains : 183 Brauer example : [1 2 3 4 7 10 20 27 47] Number of minimum length non-Brauer chains : 37 Non-Brauer example : [1 2 3 5 7 14 19 28 47] N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains : 492 Brauer example : [1 2 3 4 7 9 18 36 43 79] Number of minimum length non-Brauer chains : 129 Non-Brauer example : [1 2 3 5 7 12 24 31 48 79] N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains : 7172 Brauer example : [1 2 3 4 7 8 15 22 44 88 103 191] Non-Brauer analysis suppressed N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains : 4 Brauer example : [1 2 4 5 9 14 23 46 92 184 198 382] Non-Brauer analysis suppressed N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains : 6583 Brauer example : [1 2 3 4 7 10 17 27 44 88 176 203 379] Non-Brauer analysis suppressed
C#
<lang csharp>using System;
namespace AdditionChains {
class Program {
static int[] Prepend(int n, int[] seq) {
int[] result = new int[seq.Length + 1];
Array.Copy(seq, 0, result, 1, seq.Length);
result[0] = n;
return result;
}
static Tuple<int, int> CheckSeq(int pos, int[] seq, int n, int min_len) {
if (pos > min_len || seq[0] > n) return new Tuple<int, int>(min_len, 0);
if (seq[0] == n) return new Tuple<int, int>(pos, 1);
if (pos < min_len) return TryPerm(0, pos, seq, n, min_len);
return new Tuple<int, int>(min_len, 0);
}
static Tuple<int, int> TryPerm(int i, int pos, int[] seq, int n, int min_len) {
if (i > pos) return new Tuple<int, int>(min_len, 0);
Tuple<int, int> res1 = CheckSeq(pos + 1, Prepend(seq[0] + seq[i], seq), n, min_len);
Tuple<int, int> res2 = TryPerm(i + 1, pos, seq, n, res1.Item1);
if (res2.Item1 < res1.Item1) return res2;
if (res2.Item1 == res1.Item1) return new Tuple<int, int>(res2.Item1, res1.Item2 + res2.Item2);
throw new Exception("TryPerm exception");
}
static Tuple<int, int> InitTryPerm(int x) {
return TryPerm(0, 0, new int[] { 1 }, x, 12);
}
static void FindBrauer(int num) {
Tuple<int, int> res = InitTryPerm(num);
Console.WriteLine();
Console.WriteLine("N = {0}", num);
Console.WriteLine("Minimum length of chains: L(n)= {0}", res.Item1);
Console.WriteLine("Number of minimum length Brauer chains: {0}", res.Item2);
}
static void Main(string[] args) {
int[] nums = new int[] { 7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379 };
Array.ForEach(nums, n => FindBrauer(n));
}
}
}</lang>
- Output:
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
C++
While this worked, something made it run extremely slow.
<lang cpp>#include <iostream>
- include <tuple>
- include <vector>
std::pair<int, int> tryPerm(int, int, const std::vector<int>&, int, int);
std::pair<int, int> checkSeq(int pos, const std::vector<int>& seq, int n, int minLen) {
if (pos > minLen || seq[0] > n) return { minLen, 0 };
else if (seq[0] == n) return { pos, 1 };
else if (pos < minLen) return tryPerm(0, pos, seq, n, minLen);
else return { minLen, 0 };
}
std::pair<int, int> tryPerm(int i, int pos, const std::vector<int>& seq, int n, int minLen) {
if (i > pos) return { minLen, 0 };
std::vector<int> seq2{ seq[0] + seq[i] };
seq2.insert(seq2.end(), seq.cbegin(), seq.cend());
auto res1 = checkSeq(pos + 1, seq2, n, minLen);
auto res2 = tryPerm(i + 1, pos, seq, n, res1.first);
if (res2.first < res1.first) return res2;
else if (res2.first == res1.first) return { res2.first, res1.second + res2.second };
else throw std::runtime_error("tryPerm exception");
}
std::pair<int, int> initTryPerm(int x) {
return tryPerm(0, 0, { 1 }, x, 12);
}
void findBrauer(int num) {
auto res = initTryPerm(num); std::cout << '\n'; std::cout << "N = " << num << '\n'; std::cout << "Minimum length of chains: L(n)= " << res.first << '\n'; std::cout << "Number of minimum length Brauer chains: " << res.second << '\n';
}
int main() {
std::vector<int> nums{ 7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379 };
for (int i : nums) {
findBrauer(i);
}
return 0;
}</lang>
- Output:
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
D
<lang D>import std.stdio; import std.typecons;
alias Pair = Tuple!(int, int);
auto check_seq(int pos, int[] seq, int n, int min_len) {
if (pos>min_len || seq[0]>n) return Pair(min_len, 0); else if (seq[0] == n) return Pair( pos, 1); else if (pos<min_len) return try_perm(0, pos, seq, n, min_len); else return Pair(min_len, 0);
}
auto try_perm(int i, int pos, int[] seq, int n, int min_len) {
if (i>pos) return Pair(min_len, 0);
auto res1 = check_seq(pos+1, [seq[0]+seq[i]]~seq, n, min_len); auto res2 = try_perm(i+1, pos, seq, n, res1[0]);
if (res2[0] < res1[0]) return res2;
else if (res2[0] == res1[0]) return Pair(res2[0], res1[1]+res2[1]);
else throw new Exception("Try_perm exception");
}
auto init_try_perm = function(int x) => try_perm(0, 0, [1], x, 12);
void find_brauer(int num) {
auto res = init_try_perm(num);
writeln;
writeln("N = ", num);
writeln("Minimum length of chains: L(n)= ", res[0]);
writeln("Number of minimum length Brauer chains: ", res[1]);
}
void main() {
auto nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379];
foreach (i; nums) {
find_brauer(i);
}
}</lang>
- Output:
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
EchoLisp
<lang scheme>
- 2^n
(define exp2 (build-vector 32 (lambda(i)(expt 2 i))))
- counters and results
(define-values (*minlg* *counts* *chains* *calls*) '(0 null null 0))
(define (register-hit chain lg ) (define idx (if (brauer? chain lg) 0 1))
(when (< lg *minlg*)
(set! *counts* (make-vector 2 0))
(set! *chains* (make-vector 2 ""))
(set! *minlg* lg))
(vector+= *counts* idx 1)
(vector-set! *chains* idx (vector->list chain)))
- is chain a brauer chain ?
(define (brauer? chain lg)
(for [(i (in-range 1 lg))]
#:break (not (vector-search* (- [chain i] [chain (1- i)]) chain)) => #f
#t))
- all min chains to target n (brute force)
(define (chains n chain lg (a) (top) (tops null)) (++ *calls*) (set! top [chain lg])
(cond
[(> lg *minlg*) #f] ;; too long
[(= n top) (register-hit chain lg)] ;; hit
[(< n top) #f] ;; too big
[(and (< *minlg* 32) (< (* top [exp2 (- *minlg* lg)]) n)) #f] ;; too small
[else
(for* ([i (in-range lg -1 -1)] [j (in-range lg (1- i) -1)])
(set! a (+ [chain i] [chain j]))
#:continue (<= a top) ;; increasing sequence
#:continue (memq a tops) ;; prevent duplicates
(set! tops (cons a tops))
(vector-push chain a)
(chains n chain (1+ lg))
(vector-pop chain))]))
(define (task n)
(set!-values (*minlg* *calls*) '(Infinity 0 ))
(chains n (make-vector 1 1) 0)
(printf "L(%d) = %d - brauer-chains: %d non-brauer: %d chains: %a %a "
n *minlg* [*counts* 0] [*counts* 1] [*chains* 0] [*chains* 1]))
</lang>
- Output:
(for-each task {7 14 21 29 32 42 64})
L(7) = 4 - brauer-chains: 5 non-brauer: 0 chains: (1 2 3 4 7)
L(14) = 5 - brauer-chains: 14 non-brauer: 0 chains: (1 2 3 4 7 14)
L(21) = 6 - brauer-chains: 26 non-brauer: 3 chains: (1 2 3 4 7 14 21) (1 2 4 5 8 13 21)
L(29) = 7 - brauer-chains: 114 non-brauer: 18 chains: (1 2 3 4 7 11 18 29) (1 2 3 6 9 11 18 29)
L(32) = 5 - brauer-chains: 1 non-brauer: 0 chains: (1 2 4 8 16 32)
L(42) = 7 - brauer-chains: 78 non-brauer: 6 chains: (1 2 3 4 7 14 21 42) (1 2 4 5 8 13 21 42)
L(64) = 6 - brauer-chains: 1 non-brauer: 0 chains: (1 2 4 8 16 32 64)
;; a few extras
(task 47)
L(47) = 8 - brauer-chains: 183 non-brauer: 37 chains: (1 2 3 4 7 10 20 27 47) (1 2 3 5 7 14 19 28 47)
(task 79)
L(79) = 9 - brauer-chains: 492 non-brauer: 129 chains: (1 2 3 4 7 9 18 36 43 79) (1 2 3 5 7 12 24 31 48 79)
Go
Version 1
<lang go>package main
import "fmt"
var example []int
func reverse(s []int) {
for i, j := 0, len(s)-1; i < j; i, j = i+1, j-1 {
s[i], s[j] = s[j], s[i]
}
}
func checkSeq(pos, n, minLen int, seq []int) (int, int) {
switch {
case pos > minLen || seq[0] > n:
return minLen, 0
case seq[0] == n:
example = seq
return pos, 1
case pos < minLen:
return tryPerm(0, pos, n, minLen, seq)
default:
return minLen, 0
}
}
func tryPerm(i, pos, n, minLen int, seq []int) (int, int) {
if i > pos {
return minLen, 0
}
seq2 := make([]int, len(seq)+1)
copy(seq2[1:], seq)
seq2[0] = seq[0] + seq[i]
res11, res12 := checkSeq(pos+1, n, minLen, seq2)
res21, res22 := tryPerm(i+1, pos, n, res11, seq)
switch {
case res21 < res11:
return res21, res22
case res21 == res11:
return res21, res12 + res22
default:
fmt.Println("Error in tryPerm")
return 0, 0
}
}
func initTryPerm(x, minLen int) (int, int) {
return tryPerm(0, 0, x, minLen, []int{1})
}
func findBrauer(num, minLen, nbLimit int) {
actualMin, brauer := initTryPerm(num, minLen)
fmt.Println("\nN =", num)
fmt.Printf("Minimum length of chains : L(%d) = %d\n", num, actualMin)
fmt.Println("Number of minimum length Brauer chains :", brauer)
if brauer > 0 {
reverse(example)
fmt.Println("Brauer example :", example)
}
example = nil
if num <= nbLimit {
nonBrauer := findNonBrauer(num, actualMin+1, brauer)
fmt.Println("Number of minimum length non-Brauer chains :", nonBrauer)
if nonBrauer > 0 {
fmt.Println("Non-Brauer example :", example)
}
example = nil
} else {
println("Non-Brauer analysis suppressed")
}
}
func isAdditionChain(a []int) bool {
for i := 2; i < len(a); i++ {
if a[i] > a[i-1]*2 {
return false
}
ok := false
jloop:
for j := i - 1; j >= 0; j-- {
for k := j; k >= 0; k-- {
if a[j]+a[k] == a[i] {
ok = true
break jloop
}
}
}
if !ok {
return false
}
}
if example == nil && !isBrauer(a) {
example = make([]int, len(a))
copy(example, a)
}
return true
}
func isBrauer(a []int) bool {
for i := 2; i < len(a); i++ {
ok := false
for j := i - 1; j >= 0; j-- {
if a[i-1]+a[j] == a[i] {
ok = true
break
}
}
if !ok {
return false
}
}
return true
}
func nextChains(index, le int, seq []int, pcount *int) {
for {
if index < le-1 {
nextChains(index+1, le, seq, pcount)
}
if seq[index]+le-1-index >= seq[le-1] {
return
}
seq[index]++
for i := index + 1; i < le-1; i++ {
seq[i] = seq[i-1] + 1
}
if isAdditionChain(seq) {
(*pcount)++
}
}
}
func findNonBrauer(num, le, brauer int) int {
seq := make([]int, le)
seq[0] = 1
seq[le-1] = num
for i := 1; i < le-1; i++ {
seq[i] = seq[i-1] + 1
}
count := 0
if isAdditionChain(seq) {
count = 1
}
nextChains(2, le, seq, &count)
return count - brauer
}
func main() {
nums := []int{7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379}
fmt.Println("Searching for Brauer chains up to a minimum length of 12:")
for _, num := range nums {
findBrauer(num, 12, 79)
}
}</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12: N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : [1 2 3 4 7] Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : [1 2 3 4 7 14] Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : [1 2 3 4 7 14 21] Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1 2 4 5 8 13 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : [1 2 3 4 7 11 18 29] Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1 2 3 6 9 11 18 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32] Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : [1 2 3 4 7 14 21 42] Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1 2 4 5 8 13 21 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32 64] Number of minimum length non-Brauer chains : 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains : 183 Brauer example : [1 2 3 4 7 10 20 27 47] Number of minimum length non-Brauer chains : 37 Non-Brauer example : [1 2 3 5 7 14 19 28 47] N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains : 492 Brauer example : [1 2 3 4 7 9 18 36 43 79] Number of minimum length non-Brauer chains : 129 Non-Brauer example : [1 2 3 5 7 12 24 31 48 79] N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains : 7172 Brauer example : [1 2 3 4 7 8 15 22 44 88 103 191] Non-Brauer analysis suppressed N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains : 4 Brauer example : [1 2 4 5 9 14 23 46 92 184 198 382] Non-Brauer analysis suppressed N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains : 6583 Brauer example : [1 2 3 4 7 10 17 27 44 88 176 203 379] Non-Brauer analysis suppressed
Version 2
Much faster than Version 1 and can now complete the non-Brauer analysis for N > 79 in a reasonable time. <lang go>package main
import (
"fmt" "time"
)
const (
maxLen = 13 maxNonBrauer = 382
)
func max(a, b int) int {
if a > b {
return a
}
return b
}
func contains(s []int, n int) bool {
for _, i := range s {
if i == n {
return true
}
}
return false
}
func isBrauer(a []int) bool {
for i := 2; i < len(a); i++ {
ok := false
for j := i - 1; j >= 0; j-- {
if a[i-1]+a[j] == a[i] {
ok = true
break
}
}
if !ok {
return false
}
}
return true
}
var (
brauerCount, nonBrauerCount int brauerExample, nonBrauerExample string
)
func additionChains(target, length int, chosen []int) int {
le := len(chosen)
last := chosen[le-1]
if last == target {
if le < length {
brauerCount = 0
nonBrauerCount = 0
}
if isBrauer(chosen) {
brauerCount++
brauerExample = fmt.Sprint(chosen)
} else {
nonBrauerCount++
nonBrauerExample = fmt.Sprint(chosen)
}
return le
}
if le == length {
return length
}
if target > maxNonBrauer {
for i := le - 1; i >= 0; i-- {
next := last + chosen[i]
if next <= target && next > chosen[len(chosen)-1] && i < length {
length = additionChains(target, length, append(chosen, next))
}
}
} else {
var ndone []int
for {
for i := le - 1; i >= 0; i-- {
next := last + chosen[i]
if next <= target && next > chosen[len(chosen)-1] && i < length &&
!contains(ndone, next) {
ndone = append(ndone, next)
length = additionChains(target, length, append(chosen, next))
}
}
le--
if le == 0 {
break
}
last = chosen[le-1]
}
}
return length
}
func main() {
start := time.Now()
nums := []int{7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379}
fmt.Println("Searching for Brauer chains up to a minimum length of", maxLen-1)
for _, num := range nums {
brauerCount = 0
nonBrauerCount = 0
le := additionChains(num, maxLen, []int{1})
fmt.Println("\nN =", num)
fmt.Printf("Minimum length of chains : L(%d) = %d\n", num, le-1)
fmt.Println("Number of minimum length Brauer chains :", brauerCount)
if brauerCount > 0 {
fmt.Println("Brauer example :", brauerExample)
}
fmt.Println("Number of minimum length non-Brauer chains :", nonBrauerCount)
if nonBrauerCount > 0 {
fmt.Println("Non-Brauer example :", nonBrauerExample)
}
}
fmt.Printf("\nTook %s\n", time.Since(start))
}</lang>
- Output:
Timing is for an Intel Core i7 8565U machine:
Searching for Brauer chains up to a minimum length of 12 N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : [1 2 3 4 7] Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : [1 2 3 4 7 14] Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : [1 2 3 4 7 14 21] Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1 2 4 5 8 13 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : [1 2 3 4 7 11 18 29] Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1 2 3 6 9 11 18 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32] Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : [1 2 3 4 7 14 21 42] Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1 2 4 5 8 13 21 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : [1 2 4 8 16 32 64] Number of minimum length non-Brauer chains : 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains : 183 Brauer example : [1 2 3 4 7 10 20 27 47] Number of minimum length non-Brauer chains : 37 Non-Brauer example : [1 2 3 5 7 14 19 28 47] N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains : 492 Brauer example : [1 2 3 4 7 9 18 36 43 79] Number of minimum length non-Brauer chains : 129 Non-Brauer example : [1 2 3 5 7 12 24 31 48 79] N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains : 7172 Brauer example : [1 2 3 4 7 8 15 22 44 88 103 191] Number of minimum length non-Brauer chains : 2615 Non-Brauer example : [1 2 3 4 7 9 14 23 46 92 99 191] N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains : 4 Brauer example : [1 2 4 5 9 14 23 46 92 184 198 382] Number of minimum length non-Brauer chains : 0 N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains : 6583 Brauer example : [1 2 3 4 7 10 17 27 44 88 176 203 379] Number of minimum length non-Brauer chains : 2493 Non-Brauer example : [1 2 3 4 7 14 17 31 62 124 131 248 379] Took 1m52.920399026s
Groovy
<lang Groovy>class AdditionChains {
private static class Pair {
int f, s
Pair(int f, int s) {
this.f = f
this.s = s
}
}
private static int[] prepend(int n, int[] seq) {
int[] result = new int[seq.length + 1]
result[0] = n
System.arraycopy(seq, 0, result, 1, seq.length)
return result
}
private static Pair check_seq(int pos, int[] seq, int n, int min_len) {
if (pos > min_len || seq[0] > n) return new Pair(min_len, 0)
else if (seq[0] == n) return new Pair(pos, 1)
else if (pos < min_len) return try_perm(0, pos, seq, n, min_len)
else return new Pair(min_len, 0)
}
private static Pair try_perm(int i, int pos, int[] seq, int n, int min_len) {
if (i > pos) return new Pair(min_len, 0)
Pair res1 = check_seq(pos + 1, prepend(seq[0] + seq[i], seq), n, min_len)
Pair res2 = try_perm(i + 1, pos, seq, n, res1.f)
if (res2.f < res1.f) return res2
else if (res2.f == res1.f) return new Pair(res2.f, res1.s + res2.s)
else throw new RuntimeException("Try_perm exception")
}
private static Pair init_try_perm(int x) {
return try_perm(0, 0, [1] as int[], x, 12)
}
private static void find_brauer(int num) {
Pair res = init_try_perm(num)
System.out.println()
System.out.println("N = " + num)
System.out.println("Minimum length of chains: L(n)= " + res.f)
System.out.println("Number of minimum length Brauer chains: " + res.s)
}
static void main(String[] args) {
int[] nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]
for (int i : nums) {
find_brauer(i)
}
}
}</lang>
- Output:
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
Java
<lang Java>public class AdditionChains {
private static class Pair {
int f, s;
Pair(int f, int s) {
this.f = f;
this.s = s;
}
}
private static int[] prepend(int n, int[] seq) {
int[] result = new int[seq.length + 1];
result[0] = n;
System.arraycopy(seq, 0, result, 1, seq.length);
return result;
}
private static Pair check_seq(int pos, int[] seq, int n, int min_len) {
if (pos > min_len || seq[0] > n) return new Pair(min_len, 0);
else if (seq[0] == n) return new Pair(pos, 1);
else if (pos < min_len) return try_perm(0, pos, seq, n, min_len);
else return new Pair(min_len, 0);
}
private static Pair try_perm(int i, int pos, int[] seq, int n, int min_len) {
if (i > pos) return new Pair(min_len, 0);
Pair res1 = check_seq(pos + 1, prepend(seq[0] + seq[i], seq), n, min_len);
Pair res2 = try_perm(i + 1, pos, seq, n, res1.f);
if (res2.f < res1.f) return res2;
else if (res2.f == res1.f) return new Pair(res2.f, res1.s + res2.s);
else throw new RuntimeException("Try_perm exception");
}
private static Pair init_try_perm(int x) {
return try_perm(0, 0, new int[]{1}, x, 12);
}
private static void find_brauer(int num) {
Pair res = init_try_perm(num);
System.out.println();
System.out.println("N = " + num);
System.out.println("Minimum length of chains: L(n)= " + res.f);
System.out.println("Number of minimum length Brauer chains: " + res.s);
}
public static void main(String[] args) {
int[] nums = new int[]{7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379};
for (int i : nums) {
find_brauer(i);
}
}
}</lang>
- Output:
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
Julia
<lang julia>checksequence(pos, seq, n, minlen) =
pos > minlen || seq[1] > n ? (minlen, 0) : seq[1] == n ? (pos, 1) : pos < minlen ? trypermutation(0, pos, seq, n, minlen) : (minlen, 0)
function trypermutation(i, pos, seq, n, minlen)
if i > pos
return minlen, 0
end
res1 = checksequence(pos + 1, pushfirst!(deepcopy(seq), seq[1] + seq[i + 1]), n, minlen)
res2 = trypermutation(i + 1, pos, seq, n, res1[1])
if res2[1] < res1[1]
return res2
elseif res2[1] == res1[1]
return res2[1], res1[2] + res2[2]
else
throw("trypermutation exception: res2 head > res1 head")
end
end
for num in [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]
(minlen, nchains) = trypermutation(0, 0, [1], num, 12)
println("N = $num\nMinimum length of chains: L(n) = $minlen")
println("Number of minimum length Brauer chains: $nchains")
end
</lang>
- Output:
N = 7 Minimum length of chains: L(n) = 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n) = 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n) = 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n) = 12 Number of minimum length Brauer chains: 6583
Kotlin
As far as the minimal Brauer chains are concerned, I've translated the code in the Scala entry which even on my modest machine is reasonably fast for generating these in isolation - negligible for N <= 79, 10 seconds for N = 191, 25 seconds for N = 382 and about 2.5 minutes for N = 379. However, N = 12509 (which according to tables requires a minimum length of 17) is still well out of reach using this code.
I've then extended the code to count the number of non-Brauer chains of the same minimum length - basically 'brute' force to generate all addition chains and then subtracted the number of Brauer ones - plus examples for both. For N <= 64 this adds little to the execution time but adds about 1 minute for N = 79 and I gave up waiting for N = 191! To deal with these glacial execution times, I've added code which enables you to suppress the non-Brauer generation for N above a specified figure. <lang scala>// version 1.1.51
var example: List<Int>? = null
fun checkSeq(pos: Int, seq: List<Int>, n: Int, minLen: Int): Pair<Int, Int> =
if (pos > minLen || seq[0] > n) minLen to 0
else if (seq[0] == n) { example = seq; pos to 1 }
else if (pos < minLen) tryPerm(0, pos, seq, n, minLen)
else minLen to 0
fun tryPerm(i: Int, pos: Int, seq: List<Int>, n: Int, minLen: Int): Pair<Int, Int> {
if (i > pos) return minLen to 0
val res1 = checkSeq(pos + 1, listOf(seq[0] + seq[i]) + seq, n, minLen)
val res2 = tryPerm(i + 1, pos, seq, n, res1.first)
return if (res2.first < res1.first) res2
else if (res2.first == res1.first) res2.first to (res1.second + res2.second)
else { println("Exception in tryPerm"); 0 to 0 }
}
fun initTryPerm(x: Int, minLen: Int) = tryPerm(0, 0, listOf(1), x, minLen)
fun findBrauer(num: Int, minLen: Int, nbLimit: Int) {
val (actualMin, brauer) = initTryPerm(num, minLen)
println("\nN = $num")
println("Minimum length of chains : L($num) = $actualMin")
println("Number of minimum length Brauer chains : $brauer")
if (brauer > 0) println("Brauer example : ${example!!.reversed()}")
example = null
if (num <= nbLimit) {
val nonBrauer = findNonBrauer(num, actualMin + 1, brauer)
println("Number of minimum length non-Brauer chains : $nonBrauer")
if (nonBrauer > 0) println("Non-Brauer example : ${example!!}")
example = null
}
else {
println("Non-Brauer analysis suppressed")
}
}
fun isAdditionChain(a: IntArray): Boolean {
for (i in 2 until a.size) {
if (a[i] > a[i - 1] * 2) return false
var ok = false
jloop@ for (j in i - 1 downTo 0) {
for (k in j downTo 0) {
if (a[j] + a[k] == a[i]) { ok = true; break@jloop }
}
}
if (!ok) return false
}
if (example == null && !isBrauer(a)) example = a.toList()
return true
}
fun isBrauer(a: IntArray): Boolean {
for (i in 2 until a.size) {
var ok = false
for (j in i - 1 downTo 0) {
if (a[i - 1] + a[j] == a[i]) { ok = true; break }
}
if (!ok) return false
}
return true
}
fun findNonBrauer(num: Int, len: Int, brauer: Int): Int {
val seq = IntArray(len) seq[0] = 1 seq[len - 1] = num for (i in 1 until len - 1) seq[i] = seq[i - 1] + 1 var count = if (isAdditionChain(seq)) 1 else 0
fun nextChains(index: Int) {
while (true) {
if (index < len - 1) nextChains(index + 1)
if (seq[index] + len - 1 - index >= seq[len - 1]) return
seq[index]++
for (i in index + 1 until len - 1) seq[i] = seq[i - 1] + 1
if (isAdditionChain(seq)) count++
}
}
nextChains(2) return count - brauer
}
fun main(args: Array<String>) {
val nums = listOf(7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379)
println("Searching for Brauer chains up to a minimum length of 12:")
for (num in nums) findBrauer(num, 12, 79)
}</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12: N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : [1, 2, 3, 4, 7] Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : [1, 2, 3, 4, 7, 14] Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : [1, 2, 3, 4, 7, 14, 21] Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1, 2, 4, 5, 8, 13, 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : [1, 2, 3, 4, 7, 11, 18, 29] Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1, 2, 3, 6, 9, 11, 18, 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : [1, 2, 4, 8, 16, 32] Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : [1, 2, 3, 4, 7, 14, 21, 42] Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1, 2, 4, 5, 8, 13, 21, 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : [1, 2, 4, 8, 16, 32, 64] Number of minimum length non-Brauer chains : 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains : 183 Brauer example : [1, 2, 3, 4, 7, 10, 20, 27, 47] Number of minimum length non-Brauer chains : 37 Non-Brauer example : [1, 2, 3, 5, 7, 14, 19, 28, 47] N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains : 492 Brauer example : [1, 2, 3, 4, 7, 9, 18, 36, 43, 79] Number of minimum length non-Brauer chains : 129 Non-Brauer example : [1, 2, 3, 5, 7, 12, 24, 31, 48, 79] N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains : 7172 Brauer example : [1, 2, 3, 4, 7, 8, 15, 22, 44, 88, 103, 191] Non-Brauer analysis suppressed N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains : 4 Brauer example : [1, 2, 4, 5, 9, 14, 23, 46, 92, 184, 198, 382] Non-Brauer analysis suppressed N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains : 6583 Brauer example : [1, 2, 3, 4, 7, 10, 17, 27, 44, 88, 176, 203, 379] Non-Brauer analysis suppressed
Lua
<lang lua>function index(a,i)
return a[i + 1]
end
function checkSeq(pos, seq, n, minLen)
if pos > minLen or index(seq,0) > n then
return minLen, 0
elseif index(seq,0) == n then
return pos, 1
elseif pos < minLen then
return tryPerm(0, pos, seq, n, minLen)
else
return minLen, 0
end
end
function tryPerm(i, pos, seq, n, minLen)
if i > pos then
return minLen, 0
end
local seq2 = {}
table.insert(seq2, index(seq,0) + index(seq,i))
for j=1,table.getn(seq) do
table.insert(seq2, seq[j])
end
local res1a, res1b = checkSeq(pos + 1, seq2, n, minLen)
local res2a, res2b = tryPerm(i + 1, pos, seq, n, res1a)
if res2a < res1a then
return res2a, res2b
elseif res2a == res1a then
return res2a, res1b + res2b
else
error("tryPerm exception")
end
end
function initTryPerm(x)
local seq = {}
table.insert(seq, 1)
return tryPerm(0, 0, seq, x, 12)
end
function findBrauer(num)
local resa, resb = initTryPerm(num)
print()
print("N = " .. num)
print("Minimum length of chains: L(n) = " .. resa)
print("Number of minimum length Brauer chains: " .. resb)
end
function main()
findBrauer(7) findBrauer(14) findBrauer(21) findBrauer(29) findBrauer(32) findBrauer(42) findBrauer(64) findBrauer(47) findBrauer(79) findBrauer(191) findBrauer(382) findBrauer(379)
end
main()</lang>
- Output:
N = 7 Minimum length of chains: L(n) = 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n) = 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n) = 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n) = 12 Number of minimum length Brauer chains: 6583
Nim
This is a translation of the second Go version. <lang Nim>import times, strutils
const
MaxLen = 13 MaxNonBrauer = 382
func isBrauer(a: seq[int]): bool =
for i in 2..a.high:
block loop:
for j in countdown(i - 1, 0):
if a[i-1] + a[j] == a[i]:
break loop
return false
result = true
var
brauerCount, nonBrauerCount: int brauerExample, nonBrauerExample: seq[int]
proc additionChains(target, length: int; chosen: seq[int]): int =
var length = length var le = chosen.len var last = chosen[^1]
if last == target:
if le < length:
brauerCount = 0
nonBrauerCount = 0
if chosen.isBrauer:
inc brauerCount
brauerExample = chosen
else:
inc nonBrauerCount
nonBrauerExample = chosen
return le
if le == length: return length
if target > MaxNonBrauer:
var nextChosen = chosen & 0
for i in countdown(le - 1, 0):
let next = last + chosen[i]
if next <= target and next > chosen[^1] and i < length:
nextChosen[^1] = next
length = additionChains(target, length, nextChosen)
else:
var ndone = newSeqOfCap[int](le)
var nextChosen = chosen & 0
while true:
for i in countdown(le - 1, 0):
let next = last + chosen[i]
if next <= target and next > chosen[^1] and i < length and next notin ndone:
ndone.add next
nextChosen[^1] = next
length = additionChains(target, length, nextChosen)
dec le
if le == 0: break
last = chosen[le-1]
result = length
const Nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]
let start = now() echo "Searching for Brauer chains up to a minimum length of ", MaxLen - 1 for num in Nums:
brauerCount = 0
nonBrauerCount = 0
let le = additionChains(num, MaxLen, @[1])
echo "\nN = ", num
echo "Minimum length of chains : L($1) = $2".format(num, le - 1)
echo "Number of minimum length Brauer chains: ", brauerCount
if brauerCount > 0:
echo "Brauer example: ", brauerExample.join(", ")
echo "Number of minimum length non-Brauer chains: ", nonBrauerCount
if nonBrauerCount > 0:
echo "Non-Brauer example: ", nonBrauerExample.join(", ")
echo "\nTook ", now() - start</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12 N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains: 5 Brauer example: 1, 2, 3, 4, 7 Number of minimum length non-Brauer chains: 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains: 14 Brauer example: 1, 2, 3, 4, 7, 14 Number of minimum length non-Brauer chains: 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains: 26 Brauer example: 1, 2, 3, 4, 7, 14, 21 Number of minimum length non-Brauer chains: 3 Non-Brauer example: 1, 2, 4, 5, 8, 13, 21 N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains: 114 Brauer example: 1, 2, 3, 4, 7, 11, 18, 29 Number of minimum length non-Brauer chains: 18 Non-Brauer example: 1, 2, 3, 6, 9, 11, 18, 29 N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains: 1 Brauer example: 1, 2, 4, 8, 16, 32 Number of minimum length non-Brauer chains: 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains: 78 Brauer example: 1, 2, 3, 4, 7, 14, 21, 42 Number of minimum length non-Brauer chains: 6 Non-Brauer example: 1, 2, 4, 5, 8, 13, 21, 42 N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains: 1 Brauer example: 1, 2, 4, 8, 16, 32, 64 Number of minimum length non-Brauer chains: 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains: 183 Brauer example: 1, 2, 3, 4, 7, 10, 20, 27, 47 Number of minimum length non-Brauer chains: 37 Non-Brauer example: 1, 2, 3, 5, 7, 14, 19, 28, 47 N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains: 492 Brauer example: 1, 2, 3, 4, 7, 9, 18, 36, 43, 79 Number of minimum length non-Brauer chains: 129 Non-Brauer example: 1, 2, 3, 5, 7, 12, 24, 31, 48, 79 N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains: 7172 Brauer example: 1, 2, 3, 4, 7, 8, 15, 22, 44, 88, 103, 191 Number of minimum length non-Brauer chains: 2615 Non-Brauer example: 1, 2, 3, 4, 7, 9, 14, 23, 46, 92, 99, 191 N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains: 4 Brauer example: 1, 2, 4, 5, 9, 14, 23, 46, 92, 184, 198, 382 Number of minimum length non-Brauer chains: 0 N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains: 6583 Brauer example: 1, 2, 3, 4, 7, 10, 17, 27, 44, 88, 176, 203, 379 Number of minimum length non-Brauer chains: 2493 Non-Brauer example: 1, 2, 3, 4, 7, 14, 17, 31, 62, 124, 131, 248, 379 Took 1 minute, 33 seconds, 138 milliseconds, 185 microseconds, and 660 nanoseconds
Perl
<lang perl>use strict; use feature 'say';
my @Example = ();
sub checkSeq {
my($pos, $n, $minLen, @seq) = @_;
if ($pos > $minLen || $seq[0] > $n) {
return $minLen, 0;
} elsif ($seq[0] == $n) {
@Example = @seq;
return $pos, 1;
} elsif ($pos < $minLen) {
return tryPerm(0, $pos, $n, $minLen, @seq);
} else {
return $minLen, 0;
}
}
sub tryPerm {
my($i, $pos, $n, $minLen, @seq) = @_;
return $minLen, 0 if $i > $pos;
my @res1 = checkSeq($pos+1, $n, $minLen, ($seq[0]+$seq[$i],@seq));
my @res2 = tryPerm($i+1, $pos, $n, $res1[0], @seq);
if ($res2[0] < $res1[0]) {
return $res2[0], $res2[1];
} elsif ($res2[0] == $res1[0]) {
return $res2[0], $res1[1]+$res2[1];
} else {
say "Error in tryPerm";
return 0, 0;
}
}
sub initTryPerm {
my($x, $minLen) = @_; return tryPerm(0, 0, $x, $minLen, (1));
}
sub findBrauer {
my($num, $minLen, $nbLimit) = @_;
my ($actualMin, $brauer) = initTryPerm($num, $minLen);
say "\nN = ". $num;
say "Minimum length of chains : L($num) = $actualMin";
say "Number of minimum length Brauer chains : ". $brauer;
say "Brauer example : ". join ' ', reverse @Example if $brauer > 0;
@Example = ();
if ($num <= $nbLimit) {
my $nonBrauer = findNonBrauer($num, $actualMin+1, $brauer);
say "Number of minimum length non-Brauer chains : ". $nonBrauer;
say "Non-Brauer example : ". join ' ', @Example if $nonBrauer > 0;
@Example = ();
} else {
say "Non-Brauer analysis suppressed";
}
}
sub isAdditionChain {
my(@a) = @_;
for my $i (2 .. $#a) {
return 0 if $a[$i] > $a[$i-1]*2;
my $ok = 0;
for my $j (reverse 0 .. $i-1) {
for my $k (reverse 0 .. $j) {
$ok = 1, last if $a[$j]+$a[$k] == $a[$i];
}
}
return 0 unless $ok;
}
@Example = @a if !isBrauer(@a) and !@Example;
return 1;
}
sub isBrauer {
my(@a) = @_;
for my $i (2 .. $#a) {
my $ok = 0;
for my $j (reverse 0 .. $i-1) {
$ok = 1, last if $a[$i-1]+$a[$j] == $a[$i];
}
return 0 unless $ok;
}
return 1;
}
sub findNonBrauer {
our($num, $len, $brauer) = @_; our @seq = 1 .. $len-1; push @seq, $num; our $count = isAdditionChain(@seq) ? 1 : 0;
sub nextChains {
my($index) = @_;
while () {
nextChains($index+1) if $index < $len-1;
return if ($seq[$index]+$len-1-$index >= $seq[$len-1]);
$seq[$index]++;
for ($index+1 .. $len-2) { $seq[$_] = $seq[$_-1] + 1;}
$count++ if isAdditionChain(@seq);
}
}
nextChains(2); return $count - $brauer;
}
my @nums = (7, 14, 21, 29, 32, 42, 64); # unlock below for extra credits,
# 47, 79, 191, 382, 379, 379, 12509);
say "Searching for Brauer chains up to a minimum length of 12:"; for (@nums) { findBrauer $_, 12, 79 }</lang>
- Output:
N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : 1 2 3 4 7 Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : 1 2 3 4 7 14 Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : 1 2 3 4 7 14 21 Number of minimum length non-Brauer chains : 3 Non-Brauer example : 1 2 4 5 8 13 21 N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : 1 2 3 4 7 11 18 29 Number of minimum length non-Brauer chains : 18 Non-Brauer example : 1 2 3 6 9 11 18 29 N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : 1 2 4 8 16 32 Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : 1 2 3 4 7 14 21 42 Number of minimum length non-Brauer chains : 6 Non-Brauer example : 1 2 4 5 8 13 21 42 N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : 1 2 4 8 16 32 64 Number of minimum length non-Brauer chains : 0
Phix
Modification of Addition-chain_exponentiation#Phix, which probably will be faster if you already know l(n) and only want one (Brauer).
Note the internal values of l(n) are [consistently] +1 compared to what the rest of the world says.
with javascript_semantics constant nums = {7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379} constant maxlen = 13 constant max_non_brauer = 79 function isBrauer(sequence a) -- translated from Go for i=3 to length(a) do bool ok = false for j=i-1 to 1 by -1 do if a[i-1]+a[j] == a[i] then ok = true exit end if end for if not ok then return false end if end for return true end function integer brauer_count, non_brauer_count sequence brauer_example, non_brauer_example atom t1 = time()+1 atom tries = 0 ppOpt({pp_IntCh,false}) function addition_chains(integer target, len, sequence chosen={1}) -- nb: target and len must be >=2 tries += 1 integer l = length(chosen), last = chosen[l] if last=target then if l<len then brauer_count = 0 non_brauer_count = 0 end if if isBrauer(chosen) then brauer_count += 1 brauer_example = chosen else non_brauer_count += 1 non_brauer_example = chosen end if return l end if if l=len then if platform()!=JS and time()>t1 then progress(sprintf("working... %s, %,d permutations",{ppf(chosen[1..l]),tries})) t1 = time()+1 end if elsif target>max_non_brauer then for i=l to 1 by -1 do integer next = last+chosen[i] if next<=target and next>chosen[$] and i<=len then len = addition_chains(target,len,chosen&next) end if end for else sequence ndone = {} -- if chosen was {1,2,4,5}, don't recurse {1,2,4,5,6} twice, -- once because 5+1=6, and again because 4+2=6, or similar. while true do for i=l to 1 by -1 do integer next = last+chosen[i] if next<=target and next>chosen[$] and i<=len and not find(next,ndone) then ndone = append(ndone,next) len = addition_chains(target,len,deep_copy(chosen)&next) end if end for l -= 1 if l=0 then exit end if last = chosen[l] end while end if return len end function printf(1,"Searching for Brauer chains up to a minimum length of %d:\n",{maxlen-1}) for i=1 to length(nums)-iff(platform()=JS?3:0) do atom t = time() brauer_count = 0 brauer_example = {} non_brauer_count = 0 integer num = nums[i], l = addition_chains(num,maxlen) integer bc = brauer_count, nbc = non_brauer_count string bs = iff(bc?" eg "&ppf(brauer_example)&",":""), ns = iff(nbc?" eg "&ppf(non_brauer_example)&",":""), e = elapsed_short(time()-t) if platform()!=JS then progress("") -- (wipe it clean) end if printf(1,"l(%d) = %d, Brauer:%d,%s Non-Brauer:%d,%s (%s, %d perms)\n",{num,l-1,bc,bs,nbc,ns,e,tries}) end for
- Output:
Searching for Brauer chains up to a minimum length of 12:
l(7) = 4, Brauer:5, eg {1,2,3,4,7}, Non-Brauer:0, (0s, 18 perms)
l(14) = 5, Brauer:14, eg {1,2,3,4,7,14}, Non-Brauer:0, (0s, 153 perms)
l(21) = 6, Brauer:26, eg {1,2,3,4,7,14,21}, Non-Brauer:3, eg {1,2,4,5,8,13,21}, (0s, 1014 perms)
l(29) = 7, Brauer:114, eg {1,2,3,4,7,11,18,29}, Non-Brauer:18, eg {1,2,3,6,9,11,18,29}, (0s, 7610 perms)
l(32) = 5, Brauer:1, eg {1,2,4,8,16,32}, Non-Brauer:0, (0s, 7780 perms)
l(42) = 7, Brauer:78, eg {1,2,3,4,7,14,21,42}, Non-Brauer:6, eg {1,2,4,5,8,13,21,42}, (0s, 15935 perms)
l(64) = 6, Brauer:1, eg {1,2,4,8,16,32,64}, Non-Brauer:0, (0s, 17018 perms)
l(47) = 8, Brauer:183, eg {1,2,3,4,7,10,20,27,47}, Non-Brauer:37, eg {1,2,3,5,7,14,19,28,47}, (0s, 105418 perms)
l(79) = 9, Brauer:492, eg {1,2,3,4,7,9,18,36,43,79}, Non-Brauer:129, eg {1,2,3,5,7,12,24,31,48,79}, (0s, 998358 perms)
l(191) = 11, Brauer:7172, eg {1,2,3,4,7,8,15,22,44,88,103,191}, Non-Brauer:2615, eg {1,2,3,4,7,9,14,23,46,92,99,191}, (1:41, 174071925 perms)
l(382) = 11, Brauer:4, eg {1,2,4,5,9,14,23,46,92,184,198,382}, Non-Brauer:0, (2:53, 467243477 perms)
l(379) = 12, Brauer:6583, eg {1,2,3,4,7,10,17,27,44,88,176,203,379}, Non-Brauer:2493, eg {1,2,3,4,7,14,17,31,62,124,131,248,379}, (29:45, 3349176887 perms)
For comparison with the Kotlin timings, setting the constant max_non_brauer to 79 yields the following (making it about 20% slower than the Go submission above, on the same box)
Searching for Brauer chains up to a minimum length of 12:
l(7) = 4, Brauer:5, eg {1,2,3,4,7}, Non-Brauer:0, (0s, 18 perms)
l(14) = 5, Brauer:14, eg {1,2,3,4,7,14}, Non-Brauer:0, (0s, 153 perms)
l(21) = 6, Brauer:26, eg {1,2,3,4,7,14,21}, Non-Brauer:3, eg {1,2,4,5,8,13,21}, (0s, 1014 perms)
l(29) = 7, Brauer:114, eg {1,2,3,4,7,11,18,29}, Non-Brauer:18, eg {1,2,3,6,9,11,18,29}, (0s, 7610 perms)
l(32) = 5, Brauer:1, eg {1,2,4,8,16,32}, Non-Brauer:0, (0s, 7780 perms)
l(42) = 7, Brauer:78, eg {1,2,3,4,7,14,21,42}, Non-Brauer:6, eg {1,2,4,5,8,13,21,42}, (0s, 15935 perms)
l(64) = 6, Brauer:1, eg {1,2,4,8,16,32,64}, Non-Brauer:0, (0s, 17018 perms)
l(47) = 8, Brauer:183, eg {1,2,3,4,7,10,20,27,47}, Non-Brauer:37, eg {1,2,3,5,7,14,19,28,47}, (0s, 105418 perms)
l(79) = 9, Brauer:492, eg {1,2,3,4,7,9,18,36,43,79}, Non-Brauer:129, eg {1,2,3,5,7,12,24,31,48,79}, (0s, 998358 perms)
l(191) = 11, Brauer:7172, eg {1,2,3,4,7,8,15,22,44,88,103,191}, Non-Brauer:0, (11s, 43748038 perms)
l(382) = 11, Brauer:4, eg {1,2,4,5,9,14,23,46,92,184,198,382}, Non-Brauer:0, (17s, 103474842 perms)
l(379) = 12, Brauer:6583, eg {1,2,3,4,7,10,17,27,44,88,176,203,379}, Non-Brauer:0, (2:19, 622842429 perms)
Python
<lang python>def prepend(n, seq):
return [n] + seq
def check_seq(pos, seq, n, min_len):
if pos > min_len or seq[0] > n:
return min_len, 0
if seq[0] == n:
return pos, 1
if pos < min_len:
return try_perm(0, pos, seq, n, min_len)
return min_len, 0
def try_perm(i, pos, seq, n, min_len):
if i > pos:
return min_len, 0
res1 = check_seq(pos + 1, prepend(seq[0] + seq[i], seq), n, min_len) res2 = try_perm(i + 1, pos, seq, n, res1[0])
if res2[0] < res1[0]:
return res2
if res2[0] == res1[0]:
return res2[0], res1[1] + res2[1]
raise Exception("try_perm exception")
def init_try_perm(x):
return try_perm(0, 0, [1], x, 12)
def find_brauer(num):
res = init_try_perm(num) print print "N = ", num print "Minimum length of chains: L(n) = ", res[0] print "Number of minimum length Brauer chains: ", res[1]
- main
nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379] for i in nums:
find_brauer(i)</lang>
- Output:
N = 7 Minimum length of chains: L(n) = 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n) = 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n) = 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n) = 12 Number of minimum length Brauer chains: 6583
Faster method
<lang python>def bauer(n):
chain = [0]*n in_chain = [False]*(n + 1) best = None best_len = n cnt = 0
def extend_chain(x=1, pos=0):
nonlocal best, best_len, cnt
if x<<(best_len - pos) < n:
return
chain[pos] = x
in_chain[x] = True
pos += 1
if in_chain[n - x]: # found solution
if pos == best_len:
cnt += 1
else:
best = tuple(chain[:pos])
best_len, cnt = pos, 1
elif pos < best_len:
for i in range(pos - 1, -1, -1):
c = x + chain[i]
if c < n:
extend_chain(c, pos)
in_chain[x] = False
extend_chain() return best + (n,), cnt
for n in [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]:
best, cnt = bauer(n)
print(f'L({n}) = {len(best) - 1}, count of minimum chain: {cnt}\ne.g.: {best}\n')</lang>
- Output:
L(7) = 4, count of minimum chain: 5 e.g.: (1, 2, 4, 6, 7) L(14) = 5, count of minimum chain: 14 e.g.: (1, 2, 4, 8, 12, 14) --- snip --- L(382) = 11, count of minimum chain: 4 e.g.: (1, 2, 4, 8, 16, 17, 33, 50, 83, 166, 332, 382) L(379) = 12, count of minimum chain: 6583 e.g.: (1, 2, 4, 8, 16, 32, 64, 96, 104, 105, 210, 315, 379)
Racket
This implementation uses the Rosette language in Racket. It is inefficient as it asks an SMT solver to enumerate every possible solutions. However, it is very straightforward to write, and in fact is quite efficient for computing l(n) and finding one example (solve n = 379 in ~3 seconds).
<lang racket>#lang rosette
(define (basic-constraints xs n)
(assert (= 1 (first xs)))
(assert (= n (last xs)))
(assert (apply < xs))
(for ([x (in-list (rest xs))] [xi (in-naturals 1)])
(assert
(apply || (for*/list ([(y yi) (in-parallel (in-list xs) (in-range xi))]
[(z zi) (in-parallel (in-list xs) (in-range xi))])
(= x (+ y z)))))))
(define (next-sol xs the-mod)
(not (apply && (for/list ([x (in-list xs)]) (= x (evaluate x the-mod))))))
(define (try-len r n enumerate?)
(define xs (build-list (add1 r)
(thunk* (define-symbolic* x integer?)
x)))
(basic-constraints xs n)
(define sols (let loop ([sols '()])
(define the-mod (solve #t))
(cond
[(unsat? the-mod) sols]
[enumerate? (assert (next-sol xs the-mod))
(loop (cons (evaluate xs the-mod) sols))]
[else (list (evaluate xs the-mod))])))
(clear-state!)
(if (empty? sols) #f (cons sols r)))
(define (brauer? xs)
(for/and ([x (in-list (rest xs))] [xi (in-naturals 1)] [x* (in-list xs)]) (for/or ([y (in-list xs)] [yi (in-range xi)]) (= x (+ x* y)))))
(define (report-chain chain name)
(printf "#~a chains: ~a\n" name (length chain)) (when (not (empty? chain)) (printf "example: ~a\n" (first chain))))
(define (compute n enumerate?)
(define sols (for/or ([r (in-naturals 1)]) (try-len r n enumerate?)))
(printf "minimal chain length l(~a) = ~a\n" n (cdr sols))
(cond
[enumerate?
(define-values (brauer-chain non-brauer-chain) (partition brauer? (car sols)))
(report-chain brauer-chain "brauer")
(report-chain non-brauer-chain "non-brauer")]
[else (printf "example: ~a\n" (first (car sols)))]))
(define (compute/time n #:enumerate? enumerate?)
(match-define-values (_ _ real _) (time-apply compute (list n enumerate?))) (printf "total time (ms): ~a\n\n" real))
(for ([x (in-list '(19 7 14 21 29 32 42 64 47 79))])
(compute/time x #:enumerate? #t))
(for ([x (in-list '(191 382 379 12509))])
(compute/time x #:enumerate? #f))</lang>
- Output:
minimal chain length l(19) = 6 #brauer chains: 31 example: (1 2 3 4 8 16 19) #non-brauer chains: 2 example: (1 2 3 6 7 12 19) total time (ms): 245 minimal chain length l(7) = 4 #brauer chains: 5 example: (1 2 3 6 7) #non-brauer chains: 0 total time (ms): 47 minimal chain length l(14) = 5 #brauer chains: 14 example: (1 2 3 5 7 14) #non-brauer chains: 0 total time (ms): 95 minimal chain length l(21) = 6 #brauer chains: 26 example: (1 2 3 4 7 14 21) #non-brauer chains: 3 example: (1 2 4 5 8 13 21) total time (ms): 204 minimal chain length l(29) = 7 #brauer chains: 114 example: (1 2 3 6 7 13 16 29) #non-brauer chains: 18 example: (1 2 3 6 9 11 18 29) total time (ms): 1443 minimal chain length l(32) = 5 #brauer chains: 1 example: (1 2 4 8 16 32) #non-brauer chains: 0 total time (ms): 42 minimal chain length l(42) = 7 #brauer chains: 78 example: (1 2 3 6 9 15 21 42) #non-brauer chains: 6 example: (1 2 4 5 8 13 21 42) total time (ms): 808 minimal chain length l(64) = 6 #brauer chains: 1 example: (1 2 4 8 16 32 64) #non-brauer chains: 0 total time (ms): 52 minimal chain length l(47) = 8 #brauer chains: 183 example: (1 2 3 5 8 11 22 44 47) #non-brauer chains: 37 example: (1 2 3 5 7 14 19 28 47) total time (ms): 6011 minimal chain length l(79) = 9 #brauer chains: 492 example: (1 2 4 8 12 13 25 29 54 79) #non-brauer chains: 129 example: (1 2 4 8 9 12 21 29 58 79) total time (ms): 38038 minimal chain length l(191) = 11 example: (1 2 4 8 16 24 28 29 53 69 138 191) total time (ms): 1601 minimal chain length l(382) = 11 example: (1 2 4 5 9 14 23 46 92 184 368 382) total time (ms): 2313 minimal chain length l(379) = 12 example: (1 2 4 8 12 24 48 72 73 121 129 258 379) total time (ms): 3176 minimal chain length l(12509) = 17 example: (1 2 3 6 12 13 24 48 96 192 384 768 781 1562 3124 6248 12496 12509) total time (ms): 237617
Raku
(formerly Perl 6)
<lang perl6>my @Example = ();
sub check-Sequence($pos, @seq, $n, $minLen --> List) {
if ($pos > $minLen or @seq[0] > $n) {
return $minLen, 0;
} elsif (@seq[0] == $n) {
@Example = @seq;
return $pos, 1;
} elsif ($pos < $minLen) {
return try-Permutation 0, $pos, @seq, $n, $minLen;
} else {
return $minLen, 0;
}
}
multi sub try-Permutation($i, $pos, @seq, $n, $minLen --> List) {
return $minLen, 0 if $i > $pos;
my @res1 = check-Sequence $pos+1, (@seq[0]+@seq[$i],@seq).flat, $n, $minLen;
my @res2 = try-Permutation $i+1, $pos, @seq, $n, @res1[0];
if (@res2[0] < @res1[0]) {
return @res2[0], @res2[1];
} elsif (@res2[0] == @res1[0]) {
return @res2[0], @res1[1]+@res2[1];
} else {
note "Error in try-Permutation";
return 0, 0;
}
}
multi sub try-Permutation($x, $minLen --> List) {
return try-Permutation 0, 0, [1], $x, $minLen;
}
sub find-Brauer($num, $minLen, $nbLimit) {
my ($actualMin, $brauer) = try-Permutation $num, $minLen;
say "\nN = ", $num;
say "Minimum length of chains : L($num) = $actualMin";
say "Number of minimum length Brauer chains : ", $brauer;
say "Brauer example : ", @Example.reverse if $brauer > 0;
@Example = ();
if ($num ≤ $nbLimit) {
my $nonBrauer = find-Non-Brauer $num, $actualMin+1, $brauer;
say "Number of minimum length non-Brauer chains : ", $nonBrauer;
say "Non-Brauer example : ", @Example if $nonBrauer > 0;
@Example = ();
} else {
say "Non-Brauer analysis suppressed";
}
}
sub is-Addition-Chain(@a --> Bool) {
for 2 .. @a.end -> $i {
return False if @a[$i] > @a[$i-1]*2 ;
my $ok = False;
for $i-1 … 0 -> $j {
for $j … 0 -> $k {
{ $ok = True; last } if @a[$j]+@a[$k] == @a[$i];
}
}
return False unless $ok;
}
@Example = @a unless @Example or is-Brauer @a; return True;
}
sub is-Brauer(@a --> Bool) {
for 2 .. @a.end -> $i {
my $ok = False;
for $i-1 … 0 -> $j {
{ $ok = True; last } if @a[$i-1]+@a[$j] == @a[$i];
}
return False unless $ok;
}
return True;
}
sub find-Non-Brauer($num, $len, $brauer --> Int) {
my @seq = flat 1 .. $len-1, $num; my $count = is-Addition-Chain(@seq) ?? 1 !! 0;
sub next-Chains($index) {
loop {
next-Chains $index+1 if $index < $len-1;
return if @seq[$index]+$len-1-$index ≥ @seq[$len-1];
@seq[$index]++;
for $index^..^$len-1 { @seq[$_] = @seq[$_-1] + 1 }
$count++ if is-Addition-Chain @seq;
}
}
next-Chains 2; return $count - $brauer;
}
say "Searching for Brauer chains up to a minimum length of 12:"; find-Brauer $_, 12, 79 for 7, 14, 21, 29, 32, 42, 64 #, 47, 79, 191, 382, 379, 379, 12509 # un-comment for extra-credit</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12: N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : (1 2 3 4 7) Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : (1 2 3 4 7 14) Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : (1 2 3 4 7 14 21) Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1 2 4 5 8 13 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : (1 2 3 4 7 11 18 29) Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1 2 3 6 9 11 18 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : (1 2 4 8 16 32) Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : (1 2 3 4 7 14 21 42) Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1 2 4 5 8 13 21 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : (1 2 4 8 16 32 64) Number of minimum length non-Brauer chains : 0
Ruby
<lang ruby>def check_seq(pos, seq, n, min_len)
if pos > min_len or seq[0] > n then
return min_len, 0
elsif seq[0] == n then
return pos, 1
elsif pos < min_len then
return try_perm(0, pos, seq, n, min_len)
else
return min_len, 0
end
end
def try_perm(i, pos, seq, n, min_len)
if i > pos then
return min_len, 0
end
res11, res12 = check_seq(pos + 1, [seq[0] + seq[i]] + seq, n, min_len) res21, res22 = try_perm(i + 1, pos, seq, n, res11)
if res21 < res11 then
return res21, res22
elsif res21 == res11 then
return res21, res12 + res22
else
raise "try_perm exception"
end
end
def init_try_perm(x)
return try_perm(0, 0, [1], x, 12)
end
def find_brauer(num)
actualMin, brauer = init_try_perm(num) puts print "N = ", num, "\n" print "Minimum length of chains: L(n)= ", actualMin, "\n" print "Number of minimum length Brauer chains: ", brauer, "\n"
end
def main
nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379]
for i in nums do
find_brauer(i)
end
end
main()</lang>
- Output:
D:\Code\github\ncoe\rosetta\Addition_chains\Ruby>N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
Scala
Following Scala implementation finds number of minimum length Brauer chains and corresponding length. <lang Scala> object chains{
def check_seq(pos:Int,seq:List[Int],n:Int,min_len:Int):(Int,Int) = {
if(pos>min_len || seq(0)>n) (min_len,0)
else if(seq(0) == n) (pos,1)
else if(pos<min_len) try_perm(0,pos,seq,n,min_len)
else (min_len,0)
}
def try_perm(i:Int,pos:Int,seq:List[Int],n:Int,min_len:Int):(Int,Int) = {
if(i>pos) return (min_len,0)
val res1 = check_seq(pos+1,seq(0)+seq(i) :: seq,n,min_len)
val res2 = try_perm(i+1,pos,seq,n,res1._1)
if(res2._1 < res1._1) res2
else if(res2._1 == res1._1) (res2._1,res1._2 + res2._2)
else {
println("Try_perm exception")
(0,0)
}
}
val init_try_perm = (x:Int) => try_perm(0,0,List[Int](1),x,10)
def find_brauer(num:Int): Unit = {
val res = init_try_perm(num)
println()
println("N = %d".format(num))
println("Minimum length of chains: L(n)= " + res._1 + f"\nNumber of minimum length Brauer chains: " + res._2)
}
def main(args:Array[String]) :Unit = {
val nums = List(7,14,21,29,32,42,64)
for (i <- nums) find_brauer(i)
}
} </lang>
N = 7 Minimum length of chains: L(n)= 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n)= 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n)= 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n)= 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n)= 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n)= 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 191 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n)= 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n)= 12 Number of minimum length Brauer chains: 6583
Visual Basic .NET
<lang vbnet>Module Module1
Function Prepend(n As Integer, seq As List(Of Integer)) As List(Of Integer)
Dim result As New List(Of Integer) From {
n
}
result.AddRange(seq)
Return result
End Function
Function CheckSeq(pos As Integer, seq As List(Of Integer), n As Integer, min_len As Integer) As Tuple(Of Integer, Integer)
If pos > min_len OrElse seq(0) > n Then
Return Tuple.Create(min_len, 0)
End If
If seq(0) = n Then
Return Tuple.Create(pos, 1)
End If
If pos < min_len Then
Return TryPerm(0, pos, seq, n, min_len)
End If
Return Tuple.Create(min_len, 0)
End Function
Function TryPerm(i As Integer, pos As Integer, seq As List(Of Integer), n As Integer, min_len As Integer) As Tuple(Of Integer, Integer)
If i > pos Then
Return Tuple.Create(min_len, 0)
End If
Dim res1 = CheckSeq(pos + 1, Prepend(seq(0) + seq(i), seq), n, min_len)
Dim res2 = TryPerm(i + 1, pos, seq, n, res1.Item1)
If res2.Item1 < res1.Item1 Then
Return res2
End If
If res2.Item1 = res1.Item1 Then
Return Tuple.Create(res2.Item1, res1.Item2 + res2.Item2)
End If
Throw New Exception("TryPerm exception")
End Function
Function InitTryPerm(x As Integer) As Tuple(Of Integer, Integer)
Return TryPerm(0, 0, New List(Of Integer) From {1}, x, 12)
End Function
Sub FindBrauer(num As Integer)
Dim res = InitTryPerm(num)
Console.WriteLine("N = {0}", num)
Console.WriteLine("Minimum length of chains: L(n) = {0}", res.Item1)
Console.WriteLine("Number of minimum length Brauer chains: {0}", res.Item2)
Console.WriteLine()
End Sub
Sub Main()
Dim nums() = {7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379}
Array.ForEach(nums, Sub(n) FindBrauer(n))
End Sub
End Module</lang>
- Output:
N = 7 Minimum length of chains: L(n) = 4 Number of minimum length Brauer chains: 5 N = 14 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 14 N = 21 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 26 N = 29 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 114 N = 32 Minimum length of chains: L(n) = 5 Number of minimum length Brauer chains: 1 N = 42 Minimum length of chains: L(n) = 7 Number of minimum length Brauer chains: 78 N = 64 Minimum length of chains: L(n) = 6 Number of minimum length Brauer chains: 1 N = 47 Minimum length of chains: L(n) = 8 Number of minimum length Brauer chains: 183 N = 79 Minimum length of chains: L(n) = 9 Number of minimum length Brauer chains: 492 N = 191 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 7172 N = 382 Minimum length of chains: L(n) = 11 Number of minimum length Brauer chains: 4 N = 379 Minimum length of chains: L(n) = 12 Number of minimum length Brauer chains: 6583
Wren
Based on Version 2 which is itself a translation of the Phix entry.
Non-Brauer analysis limited to N = 191 in order to finish in a reasonable time - about 10.75 minutes on my machine. <lang ecmascript>var maxLen = 13 var maxNonBrauer = 191
var isBrauer = Fn.new { |a|
for (i in 2...a.count) {
var ok = false
for (j in i-1..0) {
if (a[i-1] + a[j] == a[i]) {
ok = true
break
}
}
if (!ok) return false
}
return true
}
var brauerCount = 0 var nonBrauerCount = 0 var brauerExample = "" var nonBrauerExample = ""
var additionChains // recursive additionChains = Fn.new { |target, length, chosen|
var le = chosen.count
var last = chosen[-1]
if (last == target) {
if (le < length) {
brauerCount = 0
nonBrauerCount = 0
}
if (isBrauer.call(chosen)) {
brauerCount = brauerCount + 1
brauerExample = chosen.toString
} else {
nonBrauerCount = nonBrauerCount + 1
nonBrauerExample = chosen.toString
}
return le
}
if (le == length) return length
if (target > maxNonBrauer) {
for (i in le-1..0) {
var next = last + chosen[i]
if (next <= target && next > chosen[-1] && i < length) {
length = additionChains.call(target, length, chosen + [next])
}
}
} else {
var ndone = []
while (true) {
for (i in le-1..0) {
var next = last + chosen[i]
if (next <= target && next > chosen[-1] && i < length &&
!ndone.contains(next)) {
ndone.add(next)
length = additionChains.call(target, length, chosen + [next])
}
}
le = le - 1
if (le == 0) break
last = chosen[le-1]
}
}
return length
}
var start = System.clock var nums = [7, 14, 21, 29, 32, 42, 64, 47, 79, 191, 382, 379] System.print("Searching for Brauer chains up to a minimum length of %(maxLen-1)") for (num in nums) {
brauerCount = 0
nonBrauerCount = 0
var le = additionChains.call(num, maxLen, [1])
System.print("\nN = %(num)")
System.print("Minimum length of chains : L(%(num)) = %(le-1)")
System.print("Number of minimum length Brauer chains : %(brauerCount)")
if (brauerCount > 0) {
System.print("Brauer example : %(brauerExample)")
}
if (num <= maxNonBrauer) {
System.print("Number of minimum length non-Brauer chains : %(nonBrauerCount)")
if (nonBrauerCount > 0) {
System.print("Non-Brauer example : %(nonBrauerExample)")
}
} else System.print("Non-Brauer analysis suppressed")
} System.print("\nTook %(System.clock - start) seconds.")</lang>
- Output:
Searching for Brauer chains up to a minimum length of 12 N = 7 Minimum length of chains : L(7) = 4 Number of minimum length Brauer chains : 5 Brauer example : [1, 2, 3, 4, 7] Number of minimum length non-Brauer chains : 0 N = 14 Minimum length of chains : L(14) = 5 Number of minimum length Brauer chains : 14 Brauer example : [1, 2, 3, 4, 7, 14] Number of minimum length non-Brauer chains : 0 N = 21 Minimum length of chains : L(21) = 6 Number of minimum length Brauer chains : 26 Brauer example : [1, 2, 3, 4, 7, 14, 21] Number of minimum length non-Brauer chains : 3 Non-Brauer example : [1, 2, 4, 5, 8, 13, 21] N = 29 Minimum length of chains : L(29) = 7 Number of minimum length Brauer chains : 114 Brauer example : [1, 2, 3, 4, 7, 11, 18, 29] Number of minimum length non-Brauer chains : 18 Non-Brauer example : [1, 2, 3, 6, 9, 11, 18, 29] N = 32 Minimum length of chains : L(32) = 5 Number of minimum length Brauer chains : 1 Brauer example : [1, 2, 4, 8, 16, 32] Number of minimum length non-Brauer chains : 0 N = 42 Minimum length of chains : L(42) = 7 Number of minimum length Brauer chains : 78 Brauer example : [1, 2, 3, 4, 7, 14, 21, 42] Number of minimum length non-Brauer chains : 6 Non-Brauer example : [1, 2, 4, 5, 8, 13, 21, 42] N = 64 Minimum length of chains : L(64) = 6 Number of minimum length Brauer chains : 1 Brauer example : [1, 2, 4, 8, 16, 32, 64] Number of minimum length non-Brauer chains : 0 N = 47 Minimum length of chains : L(47) = 8 Number of minimum length Brauer chains : 183 Brauer example : [1, 2, 3, 4, 7, 10, 20, 27, 47] Number of minimum length non-Brauer chains : 37 Non-Brauer example : [1, 2, 3, 5, 7, 14, 19, 28, 47] N = 79 Minimum length of chains : L(79) = 9 Number of minimum length Brauer chains : 492 Brauer example : [1, 2, 3, 4, 7, 9, 18, 36, 43, 79] Number of minimum length non-Brauer chains : 129 Non-Brauer example : [1, 2, 3, 5, 7, 12, 24, 31, 48, 79] N = 191 Minimum length of chains : L(191) = 11 Number of minimum length Brauer chains : 7172 Brauer example : [1, 2, 3, 4, 7, 8, 15, 22, 44, 88, 103, 191] Number of minimum length non-Brauer chains : 2615 Non-Brauer example : [1, 2, 3, 4, 7, 9, 14, 23, 46, 92, 99, 191] N = 382 Minimum length of chains : L(382) = 11 Number of minimum length Brauer chains : 4 Brauer example : [1, 2, 4, 5, 9, 14, 23, 46, 92, 184, 198, 382] Non-Brauer analysis suppressed N = 379 Minimum length of chains : L(379) = 12 Number of minimum length Brauer chains : 6583 Brauer example : [1, 2, 3, 4, 7, 10, 17, 27, 44, 88, 176, 203, 379] Non-Brauer analysis suppressed Took 645.993693 seconds.
zkl
<lang zkl>var exp2=(32).pump(List,(2).pow), // 2^n, n=0..31
_minlg, _counts, _chains; // counters and results
fcn register_hit(chain,lg){ // save [upto 2] chains
idx:=(if(isBrauer(chain,lg)) 0 else 1);
if(lg<_minlg) _counts,_chains,_minlg=List(0,0), List("",""), lg;
_counts[idx]+=1;
_chains[idx]=chain.copy();
}
// is chain a brauer chain ?
fcn isBrauer(chain,lg){
foreach i in (lg){
if(not chain.holds(chain[i+1] - chain[i])) return(False);
}
True
}
// all min chains to target n (brute force)
fcn chains(n,chain,lg){
top,tops:=chain[lg], List();
if(lg>_minlg) {} // too long
else if(n==top) register_hit(chain,lg); // hit
else if(n<top) {} // too big
else if((_minlg<32) and (top*exp2[_minlg - lg]<n)){} // too small
else{
foreach i,j in ([lg..0,-1],[lg..i,-1]){
a:=chain[i] + chain[j];
if(a<=top) continue; // increasing sequence if(tops.holds(a)) continue; // prevent duplicates tops.append(a); chain.append(a); self.fcn(n,chain,lg+1); // recurse chain.pop();
} }
}</lang> <lang zkl>fcn task(n){
_minlg=(0).MAX;
chains(n,List(1),0);
println("L(%2d) = %d; Brauer-chains: %3d; non-brauer: %3d; chains: %s"
.fmt(n,_minlg,_counts.xplode(),_chains.filter()));
} T(7,14,21,29,32,42,64,47,79).apply2(task);</lang>
- Output:
L( 7) = 4; Brauer-chains: 5; non-brauer: 0; chains: L(L(1,2,3,4,7)) L(14) = 5; Brauer-chains: 14; non-brauer: 0; chains: L(L(1,2,3,4,7,14)) L(21) = 6; Brauer-chains: 26; non-brauer: 3; chains: L(L(1,2,3,4,7,14,21),L(1,2,4,5,8,13,21)) L(29) = 7; Brauer-chains: 114; non-brauer: 18; chains: L(L(1,2,3,4,7,11,18,29),L(1,2,3,6,9,11,18,29)) L(32) = 5; Brauer-chains: 1; non-brauer: 0; chains: L(L(1,2,4,8,16,32)) L(42) = 7; Brauer-chains: 78; non-brauer: 6; chains: L(L(1,2,3,4,7,14,21,42),L(1,2,4,5,8,13,21,42)) L(64) = 6; Brauer-chains: 1; non-brauer: 0; chains: L(L(1,2,4,8,16,32,64)) L(47) = 8; Brauer-chains: 183; non-brauer: 37; chains: L(L(1,2,3,4,7,10,20,27,47),L(1,2,3,5,7,14,19,28,47)) L(79) = 9; Brauer-chains: 492; non-brauer: 129; chains: L(L(1,2,3,4,7,9,18,36,43,79),L(1,2,3,5,7,12,24,31,48,79))