Sorting algorithms/Merge sort: Difference between revisions
m
→{{header|Standard ML}}: minor reformat of SML and extra example
m (→{{header|Standard ML}}: minor reformat of SML and extra example) |
|||
(389 intermediate revisions by more than 100 users not shown) | |||
Line 1:
{{task|Sorting Algorithms}}
{{Sorting Algorithm}}
[[Category:Sorting]]
[[Category:Recursion]]
The '''merge sort''' is a recursive sort of order <big> n*log(n). </big>
It is notable for having a worst case and average complexity of <big> ''O(n*log(n))'', </big> and a best case complexity of <big> ''O(n)'' </big> (for pre-sorted input).
The basic idea is to split the collection into smaller groups by halving it until the groups only have one element or no elements (which are both entirely sorted groups).
Then merge the groups back together so that their elements are in order.
This is how the algorithm gets its ''divide and conquer'' description.
;Task:
Write a function to sort a collection of integers using the merge sort.
The merge sort algorithm comes in two parts:
a sort function and
a merge function
The functions in pseudocode look like this:
'''function''' ''mergesort''(m)
'''var''' list left, right, result
Line 34 ⟶ 56:
'''append''' rest(right) '''to''' result
'''return''' result
;See also:
* the Wikipedia entry: [[wp:Merge_sort| merge sort]]
Note: better performance can be expected if, rather than recursing until <big> length(m) ≤ 1, </big> an insertion sort is used for <big> length(m) </big> smaller than some threshold larger than '''1'''. However, this complicates the example code, so it is not shown here.
<br><br>
=={{header|11l}}==
{{trans|Python}}
<syntaxhighlight lang="11l">F merge(left, right)
[Int] result
V left_idx = 0
V right_idx = 0
L left_idx < left.len & right_idx < right.len
I left[left_idx] <= right[right_idx]
result.append(left[left_idx])
left_idx++
E
result.append(right[right_idx])
right_idx++
I left_idx < left.len
result.extend(left[left_idx ..])
I right_idx < right.len
result.extend(right[right_idx ..])
R result
F merge_sort(m)
I m.len <= 1
R m
V middle = m.len I/ 2
V left = m[0.<middle]
V right = m[middle..]
left = merge_sort(left)
right = merge_sort(right)
R Array(merge(left, right))
V arr = [7, 6, 5, 9, 8, 4, 3, 1, 2, 0]
print(merge_sort(arr))</syntaxhighlight>
{{out}}
<pre>
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
</pre>
=={{header|360 Assembly}}==
{{trans|BBC BASIC}}
The program uses ASM structured macros and two ASSIST macros (XDECO, XPRNT) to keep the code as short as possible.
<syntaxhighlight lang="360asm">* Merge sort 19/06/2016
MAIN CSECT
STM R14,R12,12(R13) save caller's registers
LR R12,R15 set R12 as base register
USING MAIN,R12 notify assembler
LA R11,SAVEXA get the address of my savearea
ST R13,4(R11) save caller's save area pointer
ST R11,8(R13) save my save area pointer
LR R13,R11 set R13 to point to my save area
LA R1,1 1
LA R2,NN hbound(a)
BAL R14,SPLIT call split(1,hbound(a))
LA RPGI,PG pgi=0
LA RI,1 i=1
DO WHILE=(C,RI,LE,=A(NN)) do i=1 to hbound(a)
LR R1,RI i
SLA R1,2 .
L R2,A-4(R1) a(i)
XDECO R2,XDEC edit a(i)
MVC 0(4,RPGI),XDEC+8 output a(i)
LA RPGI,4(RPGI) pgi=pgi+4
LA RI,1(RI) i=i+1
ENDDO , end do
XPRNT PG,80 print buffer
L R13,SAVEXA+4 restore caller's savearea address
LM R14,R12,12(R13) restore caller's registers
XR R15,R15 set return code to 0
BR R14 return to caller
* split(istart,iend) ------recursive---------------------
SPLIT STM R14,R12,12(R13) save all registers
LR R9,R1 save R1
LA R1,72 amount of storage required
GETMAIN RU,LV=(R1) allocate storage for stack
USING STACK,R10 make storage addressable
LR R10,R1 establish stack addressability
LA R11,SAVEXB get the address of my savearea
ST R13,4(R11) save caller's save area pointer
ST R11,8(R13) save my save area pointer
LR R13,R11 set R13 to point to my save area
LR R1,R9 restore R1
LR RSTART,R1 istart=R1
LR REND,R2 iend=R2
IF CR,REND,EQ,RSTART THEN if iend=istart
B RETURN return
ENDIF , end if
BCTR R2,0 iend-1
IF C,R2,EQ,RSTART THEN if iend-istart=1
LR R1,REND iend
SLA R1,2 .
L R2,A-4(R1) a(iend)
LR R1,RSTART istart
SLA R1,2 .
L R3,A-4(R1) a(istart)
IF CR,R2,LT,R3 THEN if a(iend)<a(istart)
LR R1,RSTART istart
SLA R1,2 .
LA R2,A-4(R1) @a(istart)
LR R1,REND iend
SLA R1,2 .
LA R3,A-4(R1) @a(iend)
MVC TEMP,0(R2) temp=a(istart)
MVC 0(4,R2),0(R3) a(istart)=a(iend)
MVC 0(4,R3),TEMP a(iend)=temp
ENDIF , end if
B RETURN return
ENDIF , end if
LR RMIDDL,REND iend
SR RMIDDL,RSTART iend-istart
SRA RMIDDL,1 (iend-istart)/2
AR RMIDDL,RSTART imiddl=istart+(iend-istart)/2
LR R1,RSTART istart
LR R2,RMIDDL imiddl
BAL R14,SPLIT call split(istart,imiddl)
LA R1,1(RMIDDL) imiddl+1
LR R2,REND iend
BAL R14,SPLIT call split(imiddl+1,iend)
LR R1,RSTART istart
LR R2,RMIDDL imiddl
LR R3,REND iend
BAL R14,MERGE call merge(istart,imiddl,iend)
RETURN L R13,SAVEXB+4 restore caller's savearea address
XR R15,R15 set return code to 0
LA R0,72 amount of storage to free
FREEMAIN A=(R10),LV=(R0) free allocated storage
L R14,12(R13) restore caller's return address
LM R2,R12,28(R13) restore registers R2 to R12
BR R14 return to caller
DROP R10 base no longer needed
* merge(jstart,jmiddl,jend) ------------------------------------
MERGE STM R1,R3,JSTART jstart=r1,jmiddl=r2,jend=r3
SR R2,R1 jmiddl-jstart
LA RBS,2(R2) bs=jmiddl-jstart+2
LA RI,1 i=1
LR R3,RBS bs
BCTR R3,0 bs-1
DO WHILE=(CR,RI,LE,R3) do i=0 to bs-1
L R2,JSTART jstart
AR R2,RI jstart+i
SLA R2,2 .
L R2,A-8(R2) a(jstart+i-1)
LR R1,RI i
SLA R1,2 .
ST R2,B-4(R1) b(i)=a(jstart+i-1)
LA RI,1(RI) i=i+1
ENDDO , end do
LA RI,1 i=1
L RJ,JMIDDL j=jmiddl
LA RJ,1(RJ) j=jmiddl+1
L RK,JSTART k=jstart
DO UNTIL=(CR,RI,EQ,RBS,OR, do until i=bs or X
C,RJ,GT,JEND) j>jend
LR R1,RI i
SLA R1,2 .
L R4,B-4(R1) r4=b(i)
LR R1,RJ j
SLA R1,2 .
L R3,A-4(R1) r3=a(j)
LR R9,RK k
SLA R9,2 r9 for a(k)
IF CR,R4,LE,R3 THEN if b(i)<=a(j)
ST R4,A-4(R9) a(k)=b(i)
LA RI,1(RI) i=i+1
ELSE , else
ST R3,A-4(R9) a(k)=a(j)
LA RJ,1(RJ) j=j+1
ENDIF , end if
LA RK,1(RK) k=k+1
ENDDO , end do
DO WHILE=(CR,RI,LT,RBS) do while i<bs
LR R1,RI i
SLA R1,2 .
L R2,B-4(R1) b(i)
LR R1,RK k
SLA R1,2 .
ST R2,A-4(R1) a(k)=b(i)
LA RI,1(RI) i=i+1
LA RK,1(RK) k=k+1
ENDDO , end do
BR R14 return to caller
* ------- ------------------ ------------------------------------
LTORG
SAVEXA DS 18F savearea of main
NN EQU ((B-A)/L'A) number of items
A DC F'4',F'65',F'2',F'-31',F'0',F'99',F'2',F'83',F'782',F'1'
DC F'45',F'82',F'69',F'82',F'104',F'58',F'88',F'112',F'89',F'74'
B DS (NN/2+1)F merge sort static storage
TEMP DS F for swap
JSTART DS F jstart
JMIDDL DS F jmiddl
JEND DS F jend
PG DC CL80' ' buffer
XDEC DS CL12 for edit
STACK DSECT dynamic area
SAVEXB DS 18F " savearea of mergsort (72 bytes)
YREGS
RI EQU 6 i
RJ EQU 7 j
RK EQU 8 k
RSTART EQU 6 istart
REND EQU 7 i
RMIDDL EQU 8 i
RPGI EQU 3 pgi
RBS EQU 0 bs
END MAIN</syntaxhighlight>
{{out}}
<pre>
-31 0 1 2 2 4 45 58 65 69 74 82 82 83 88 89 99 104 112 782
</pre>
=={{header|AArch64 Assembly}}==
{{works with|as|Raspberry Pi 3B version Buster 64 bits}}
<syntaxhighlight lang="aarch64 assembly">
/* ARM assembly AARCH64 Raspberry PI 3B */
/* program mergeSort64.s */
/*******************************************/
/* Constantes file */
/*******************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeConstantesARM64.inc"
/*********************************/
/* Initialized data */
/*********************************/
.data
szMessSortOk: .asciz "Table sorted.\n"
szMessSortNok: .asciz "Table not sorted !!!!!.\n"
sMessResult: .asciz "Value : @ \n"
szCarriageReturn: .asciz "\n"
.align 4
TableNumber: .quad 1,3,11,6,2,5,9,10,8,4,7
#TableNumber: .quad 10,9,8,7,6,-5,4,3,2,1
.equ NBELEMENTS, (. - TableNumber) / 8
/*********************************/
/* UnInitialized data */
/*********************************/
.bss
sZoneConv: .skip 24
/*********************************/
/* code section */
/*********************************/
.text
.global main
main: // entry of program
ldr x0,qAdrTableNumber // address number table
mov x1,0 // first element
mov x2,NBELEMENTS // number of élements
bl mergeSort
ldr x0,qAdrTableNumber // address number table
bl displayTable
ldr x0,qAdrTableNumber // address number table
mov x1,NBELEMENTS // number of élements
bl isSorted // control sort
cmp x0,1 // sorted ?
beq 1f
ldr x0,qAdrszMessSortNok // no !! error sort
bl affichageMess
b 100f
1: // yes
ldr x0,qAdrszMessSortOk
bl affichageMess
100: // standard end of the program
mov x0,0 // return code
mov x8,EXIT // request to exit program
svc 0 // perform the system call
qAdrsZoneConv: .quad sZoneConv
qAdrszCarriageReturn: .quad szCarriageReturn
qAdrsMessResult: .quad sMessResult
qAdrTableNumber: .quad TableNumber
qAdrszMessSortOk: .quad szMessSortOk
qAdrszMessSortNok: .quad szMessSortNok
/******************************************************************/
/* control sorted table */
/******************************************************************/
/* x0 contains the address of table */
/* x1 contains the number of elements > 0 */
/* x0 return 0 if not sorted 1 if sorted */
isSorted:
stp x2,lr,[sp,-16]! // save registers
stp x3,x4,[sp,-16]! // save registers
mov x2,0
ldr x4,[x0,x2,lsl 3]
1:
add x2,x2,1
cmp x2,x1
bge 99f
ldr x3,[x0,x2, lsl 3]
cmp x3,x4
blt 98f
mov x4,x3
b 1b
98:
mov x0,0 // not sorted
b 100f
99:
mov x0,1 // sorted
100:
ldp x3,x4,[sp],16 // restaur 2 registers
ldp x2,lr,[sp],16 // restaur 2 registers
ret // return to address lr x30
/******************************************************************/
/* merge */
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains first start index
/* r2 contains second start index */
/* r3 contains the last index */
merge:
stp x1,lr,[sp,-16]! // save registers
stp x2,x3,[sp,-16]! // save registers
stp x4,x5,[sp,-16]! // save registers
stp x6,x7,[sp,-16]! // save registers
str x8,[sp,-16]!
mov x5,x2 // init index x2->x5
1: // begin loop first section
ldr x6,[x0,x1,lsl 3] // load value first section index r1
ldr x7,[x0,x5,lsl 3] // load value second section index r5
cmp x6,x7
ble 4f // <= -> location first section OK
str x7,[x0,x1,lsl 3] // store value second section in first section
add x8,x5,1
cmp x8,x3 // end second section ?
ble 2f
str x6,[x0,x5,lsl 3]
b 4f // loop
2: // loop insert element part 1 into part 2
sub x4,x8,1
ldr x7,[x0,x8,lsl 3] // load value 2
cmp x6,x7 // value <
bge 3f
str x6,[x0,x4,lsl 3] // store value
b 4f // loop
3:
str x7,[x0,x4,lsl 3] // store value 2
add x8,x8,1
cmp x8,x3 // end second section ?
ble 2b // no loop
sub x8,x8,1
str x6,[x0,x8,lsl 3] // store value 1
4:
add x1,x1,1
cmp x1,x2 // end first section ?
blt 1b
100:
ldr x8,[sp],16 // restaur 1 register
ldp x6,x7,[sp],16 // restaur 2 registers
ldp x4,x5,[sp],16 // restaur 2 registers
ldp x2,x3,[sp],16 // restaur 2 registers
ldp x1,lr,[sp],16 // restaur 2 registers
ret // return to address lr x30
/******************************************************************/
/* merge sort */
/******************************************************************/
/* x0 contains the address of table */
/* x1 contains the index of first element */
/* x2 contains the number of element */
mergeSort:
stp x3,lr,[sp,-16]! // save registers
stp x4,x5,[sp,-16]! // save registers
stp x6,x7,[sp,-16]! // save registers
cmp x2,2 // end ?
blt 100f
lsr x4,x2,1 // number of element of each subset
add x5,x4,1
tst x2,#1 // odd ?
csel x4,x5,x4,ne
mov x5,x1 // save first element
mov x6,x2 // save number of element
mov x7,x4 // save number of element of each subset
mov x2,x4
bl mergeSort
mov x1,x7 // restaur number of element of each subset
mov x2,x6 // restaur number of element
sub x2,x2,x1
mov x3,x5 // restaur first element
add x1,x1,x3 // + 1
bl mergeSort // sort first subset
mov x1,x5 // restaur first element
mov x2,x7 // restaur number of element of each subset
add x2,x2,x1
mov x3,x6 // restaur number of element
add x3,x3,x1
sub x3,x3,1 // last index
bl merge
100:
ldp x6,x7,[sp],16 // restaur 2 registers
ldp x4,x5,[sp],16 // restaur 2 registers
ldp x3,lr,[sp],16 // restaur 2 registers
ret // return to address lr x30
/******************************************************************/
/* Display table elements */
/******************************************************************/
/* x0 contains the address of table */
displayTable:
stp x1,lr,[sp,-16]! // save registers
stp x2,x3,[sp,-16]! // save registers
mov x2,x0 // table address
mov x3,0
1: // loop display table
ldr x0,[x2,x3,lsl 3]
ldr x1,qAdrsZoneConv
bl conversion10S // décimal conversion
ldr x0,qAdrsMessResult
ldr x1,qAdrsZoneConv
bl strInsertAtCharInc // insert result at // character
bl affichageMess // display message
add x3,x3,1
cmp x3,NBELEMENTS - 1
ble 1b
ldr x0,qAdrszCarriageReturn
bl affichageMess
mov x0,x2
100:
ldp x2,x3,[sp],16 // restaur 2 registers
ldp x1,lr,[sp],16 // restaur 2 registers
ret // return to address lr x30
/********************************************************/
/* File Include fonctions */
/********************************************************/
/* for this file see task include a file in language AArch64 assembly */
.include "../includeARM64.inc"
</syntaxhighlight>
=={{header|ACL2}}==
<syntaxhighlight lang="lisp">(defun split (xys)
(if (endp (rest xys))
(mv xys nil)
(mv-let (xs ys)
(split (rest (rest xys)))
(mv (cons (first xys) xs)
(cons (second xys) ys)))))
(defun mrg (xs ys)
(declare (xargs :measure (+ (len xs) (len ys))))
(cond ((endp xs) ys)
((endp ys) xs)
((< (first xs) (first ys))
(cons (first xs) (mrg (rest xs) ys)))
(t (cons (first ys) (mrg xs (rest ys))))))
(defthm split-shortens
(implies (consp (rest xs))
(mv-let (ys zs)
(split xs)
(and (< (len ys) (len xs))
(< (len zs) (len xs))))))
(defun msort (xs)
(declare (xargs
:measure (len xs)
:hints (("Goal"
:use ((:instance split-shortens))))))
(if (endp (rest xs))
xs
(mv-let (ys zs)
(split xs)
(mrg (msort ys)
(msort zs)))))</syntaxhighlight>
=={{header|Action!}}==
Action! language does not support recursion. Therefore an iterative approach has been proposed.
<syntaxhighlight lang="action!">DEFINE MAX_COUNT="100"
PROC PrintArray(INT ARRAY a INT size)
INT i
Put('[)
FOR i=0 TO size-1
DO
IF i>0 THEN Put(' ) FI
PrintI(a(i))
OD
Put(']) PutE()
RETURN
PROC Merge(INT ARRAY a INT first,mid,last)
INT ARRAY left(MAX_COUNT),right(MAX_COUNT)
INT leftSize,rightSize,i,j,k
leftSize=mid-first+1
rightSize=last-mid
FOR i=0 TO leftSize-1
DO
left(i)=a(first+i)
OD
FOR i=0 TO rightSize-1
DO
right(i)=a(mid+1+i)
OD
i=0 j=0
k=first
WHILE i<leftSize AND j<rightSize
DO
IF left(i)<=right(j) THEN
a(k)=left(i)
i==+1
ELSE
a(k)=right(j)
j==+1
FI
k==+1
OD
WHILE i<leftSize
DO
a(k)=left(i)
i==+1 k==+1
OD
WHILE j<rightSize
DO
a(k)=right(j)
j==+1 k==+1
OD
RETURN
PROC MergeSort(INT ARRAY a INT size)
INT currSize,first,mid,last
currSize=1
WHILE currSize<size
DO
first=0
WHILE first<size-1
DO
mid=first+currSize-1
IF mid>size-1 THEN
mid=size-1
FI
last=first+2*currSize-1
IF last>size-1 THEN
last=size-1
FI
Merge(a,first,mid,last);
first==+2*currSize
OD
currSize==*2
OD
RETURN
PROC Test(INT ARRAY a INT size)
PrintE("Array before sort:")
PrintArray(a,size)
MergeSort(a,size)
PrintE("Array after sort:")
PrintArray(a,size)
PutE()
RETURN
PROC Main()
INT ARRAY
a(10)=[1 4 65535 0 3 7 4 8 20 65530],
b(21)=[10 9 8 7 6 5 4 3 2 1 0
65535 65534 65533 65532 65531
65530 65529 65528 65527 65526],
c(8)=[101 102 103 104 105 106 107 108],
d(12)=[1 65535 1 65535 1 65535 1
65535 1 65535 1 65535]
Test(a,10)
Test(b,21)
Test(c,8)
Test(d,12)
RETURN</syntaxhighlight>
{{out}}
[https://gitlab.com/amarok8bit/action-rosetta-code/-/raw/master/images/Merge_sort.png Screenshot from Atari 8-bit computer]
<pre>
Array before sort:
[1 4 -1 0 3 7 4 8 20 -6]
Array after sort:
[-6 -1 0 1 3 4 4 7 8 20]
Array before sort:
[10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10]
Array after sort:
[-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10]
Array before sort:
[101 102 103 104 105 106 107 108]
Array after sort:
[101 102 103 104 105 106 107 108]
Array before sort:
[1 -1 1 -1 1 -1 1 -1 1 -1 1 -1]
Array after sort:
[-1 -1 -1 -1 -1 -1 1 1 1 1 1 1]
</pre>
=={{header|ActionScript}}==
<syntaxhighlight lang="actionscript">function mergesort(a:Array)
{
//Arrays of length 1 and 0 are always sorted
if(a.length <= 1) return a;
else
{
var middle:uint = a.length/2;
//split the array into two
var left:Array = new Array(middle);
var right:Array = new Array(a.length-middle);
var j:uint = 0, k:uint = 0;
//fill the left array
for(var i:uint = 0; i < middle; i++)
left[j++]=a[i];
//fill the right array
for(i = middle; i< a.length; i++)
right[k++]=a[i];
//sort the arrays
left = mergesort(left);
right = mergesort(right);
//If the last element of the left array is less than or equal to the first
//element of the right array, they are in order and don't need to be merged
if(left[left.length-1] <= right[0])
return left.concat(right);
a = merge(left, right);
return a;
}
}
function merge(left:Array, right:Array)
{
var result:Array = new Array(left.length + right.length);
var j:uint = 0, k:uint = 0, m:uint = 0;
//merge the arrays in order
while(j < left.length && k < right.length)
{
if(left[j] <= right[k])
result[m++] = left[j++];
else
result[m++] = right[k++];
}
//If one of the arrays has remaining entries that haven't been merged, they
//will be greater than the rest of the numbers merged so far, so put them on the
//end of the array.
for(; j < left.length; j++)
result[m++] = left[j];
for(; k < right.length; k++)
result[m++] = right[k];
return result;
}</syntaxhighlight>
=={{header|Ada}}==
This example creates a generic package for sorting arrays of any type. Ada allows array indices to be any discrete type, including enumerated types which are non-numeric. Furthermore, numeric array indices can start at any value, positive, negative, or zero. The following code handles all the possible variations in index types.
<
type Element_Type is private;
type Index_Type is (<>);
Line 45 ⟶ 726:
package Mergesort is
function Sort(Item : Collection_Type) return Collection_Type;
end MergeSort;</
<
-----------
Line 108 ⟶ 789:
end Sort;
end Mergesort;</
The following code provides an usage example for the generic package defined above.
<
with Mergesort;
Line 128 ⟶ 809:
Print(List);
Print(List_Sort.Sort(List));
end Mergesort_Test;</
{{out}}
<pre>
1 5 2 7 3 9 4 6
Line 140 ⟶ 821:
a different memory location is expensive, then the optimised version should
be used as the DATA elements are handled indirectly.
<
PROC merge sort = ([]DATA m)[]DATA: (
Line 180 ⟶ 861:
[32]CHAR char array data := "big fjords vex quick waltz nymph";
print((merge sort(char array data), new line));</
{{out}}
<pre>
abcdefghiijklmnopqrstuvwxyz
</pre>
Optimised version:
# avoids FLEX array copies and manipulations
# avoids type DATA memory copies, useful in cases where DATA is a large STRUCT
<
IF LWB m >= UPB m THEN
m
Line 224 ⟶ 906:
[]REF CHAR result = opt merge sort(data);
FOR i TO UPB result DO print((result[i])) OD; print(new line)</
{{out}}
<pre>
abcdefghiijklmnopqrstuvwxyz
</pre>
=={{header|AppleScript}}==
<syntaxhighlight lang="applescript">(*
In-place, iterative binary merge sort
Merge sort algorithm: John von Neumann, 1945.
Convenience terminology used here:
run: one of two adjacent source-list ranges containing ordered items for merging.
block: range in the destination list to which two runs are merged.
*)
on mergeSort(theList, l, r) -- Sort items l thru r of theList.
set listLength to (count theList)
if (listLength < 2) then return
-- Convert negative and/or transposed range indices.
if (l < 0) then set l to listLength + l + 1
if (r < 0) then set r to listLength + r + 1
if (l > r) then set {l, r} to {r, l}
-- Script object containing the input list and the sort range indices.
script main
property lst : theList
property l : missing value
property r : missing value
end script
set {main's l, main's r} to {l, r}
-- Just swap adjacent items as necessary on the first pass.
-- (Short insertion sorts would be better, to create larger initial runs.)
repeat with j from (l + 1) to r by 2
set i to j - 1
set lv to main's lst's item i
set rv to main's lst's item j
if (lv > rv) then
set main's lst's item i to rv
set main's lst's item j to lv
end if
end repeat
set rangeLength to r - l + 1
if (rangeLength < 3) then return -- That's all if fewer than three items to sort.
-- Script object to alternate with the one above as the source and destination for the
-- merges. Its list need only contain the items from the sort range as ordered so far.
script aux
property lst : main's lst's items l thru r
property l : 1
property r : rangeLength
end script
-- Work out how many merging passes will be needed and set the script objects' initial
-- source and destination roles so that the final pass will merge back to the original list.
set passesToDo to 0
set blockSize to 2
repeat while (blockSize < rangeLength)
set passesToDo to passesToDo + 1
set blockSize to blockSize + blockSize
end repeat
set {srce, dest} to {{main, aux}, {aux, main}}'s item (passesToDo mod 2 + 1)
-- Do the remaining passes, doubling the run and block sizes on each pass.
-- (The end set in each pass will usually be truncated.)
set blockSize to 2
repeat passesToDo times -- Per pass.
set runSize to blockSize
set blockSize to blockSize + blockSize
set k to (dest's l) - 1 -- Destination traversal index.
repeat with leftStart from srce's l to srce's r by blockSize -- Per merge.
set blockEnd to k + blockSize
if (blockEnd comes after dest's r) then set blockEnd to dest's r
set i to leftStart -- Left run traversal index.
set leftEnd to leftStart + runSize - 1
if (leftEnd comes before srce's r) then
set j to leftEnd + 1 -- Right run traversal index.
set rightEnd to leftEnd + runSize
if (rightEnd comes after srce's r) then set rightEnd to srce's r
-- Merge process:
set lv to srce's lst's item i
set rv to srce's lst's item j
repeat with k from (k + 1) to blockEnd
if (lv > rv) then
set dest's lst's item k to rv
if (j = rightEnd) then exit repeat -- Right run used up.
set j to j + 1
set rv to srce's lst's item j
else
set dest's lst's item k to lv
if (i = leftEnd) then -- Left run used up.
set i to j
exit repeat
end if
set i to i + 1
set lv to srce's lst's item i
end if
end repeat
end if
-- Use up the remaining items from the not-yet-exhausted run.
repeat with k from (k + 1) to blockEnd
set dest's lst's item k to srce's lst's item i
set i to i + 1
end repeat
end repeat -- Per merge.
-- Switch source and destination scripts for the next pass.
tell srce
set srce to dest
set dest to it
end tell
end repeat -- Per pass.
return -- nothing
end mergeSort
property sort : mergeSort
-- Demo:
local aList
set aList to {22, 15, 98, 82, 22, 4, 58, 70, 80, 38, 49, 48, 46, 54, 93, 8, 54, 2, 72, 84, 86, 76, 53, 37, 90}
sort(aList, 1, -1) -- Sort items 1 thru -1 of aList.
return aList</syntaxhighlight>
{{output}}
<syntaxhighlight lang="applescript">{2, 4, 8, 15, 22, 22, 37, 38, 46, 48, 49, 53, 54, 54, 58, 70, 72, 76, 80, 82, 84, 86, 90, 93, 98}</syntaxhighlight>
=={{header|ARM Assembly}}==
{{works with|as|Raspberry Pi}}
<syntaxhighlight lang="arm assembly">
/* ARM assembly Raspberry PI */
/* program mergeSort.s */
/* REMARK 1 : this program use routines in a include file
see task Include a file language arm assembly
for the routine affichageMess conversion10
see at end of this program the instruction include */
/* for constantes see task include a file in arm assembly */
/************************************/
/* Constantes */
/************************************/
.include "../constantes.inc"
/*********************************/
/* Initialized data */
/*********************************/
.data
szMessSortOk: .asciz "Table sorted.\n"
szMessSortNok: .asciz "Table not sorted !!!!!.\n"
sMessResult: .asciz "Value : @ \n"
szCarriageReturn: .asciz "\n"
.align 4
#TableNumber: .int 1,11,3,6,2,5,9,10,8,4,7
TableNumber: .int 10,9,8,7,6,5,4,3,2,1
.equ NBELEMENTS, (. - TableNumber) / 4
/*********************************/
/* UnInitialized data */
/*********************************/
.bss
sZoneConv: .skip 24
/*********************************/
/* code section */
/*********************************/
.text
.global main
main: @ entry of program
ldr r0,iAdrTableNumber @ address number table
mov r1,#0 @ first element
mov r2,#NBELEMENTS @ number of élements
bl mergeSort
ldr r0,iAdrTableNumber @ address number table
bl displayTable
ldr r0,iAdrTableNumber @ address number table
mov r1,#NBELEMENTS @ number of élements
bl isSorted @ control sort
cmp r0,#1 @ sorted ?
beq 1f
ldr r0,iAdrszMessSortNok @ no !! error sort
bl affichageMess
b 100f
1: @ yes
ldr r0,iAdrszMessSortOk
bl affichageMess
100: @ standard end of the program
mov r0, #0 @ return code
mov r7, #EXIT @ request to exit program
svc #0 @ perform the system call
iAdrszCarriageReturn: .int szCarriageReturn
iAdrsMessResult: .int sMessResult
iAdrTableNumber: .int TableNumber
iAdrszMessSortOk: .int szMessSortOk
iAdrszMessSortNok: .int szMessSortNok
/******************************************************************/
/* control sorted table */
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains the number of elements > 0 */
/* r0 return 0 if not sorted 1 if sorted */
isSorted:
push {r2-r4,lr} @ save registers
mov r2,#0
ldr r4,[r0,r2,lsl #2]
1:
add r2,#1
cmp r2,r1
movge r0,#1
bge 100f
ldr r3,[r0,r2, lsl #2]
cmp r3,r4
movlt r0,#0
blt 100f
mov r4,r3
b 1b
100:
pop {r2-r4,lr}
bx lr @ return
/******************************************************************/
/* merge */
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains first start index
/* r2 contains second start index */
/* r3 contains the last index */
merge:
push {r1-r8,lr} @ save registers
mov r5,r2 @ init index r2->r5
1: @ begin loop first section
ldr r6,[r0,r1,lsl #2] @ load value first section index r1
ldr r7,[r0,r5,lsl #2] @ load value second section index r5
cmp r6,r7
ble 3f @ <= -> location first section OK
str r7,[r0,r1,lsl #2] @ store value second section in first section
add r8,r5,#1
cmp r8,r3 @ end second section ?
strgt r6,[r0,r5,lsl #2]
bgt 3f @ loop
2: @ loop insert element part 1 into part 2
sub r4,r8,#1
ldr r7,[r0,r8,lsl #2] @ load value 2
cmp r6,r7 @ value <
strlt r6,[r0,r4,lsl #2] @ store value
blt 3f
str r7,[r0,r4,lsl #2] @ store value 2
add r8,#1
cmp r8,r3 @ end second section ?
ble 2b @ no loop
sub r8,#1
str r6,[r0,r8,lsl #2] @ store value 1
3:
add r1,#1
cmp r1,r2 @ end first section ?
blt 1b
100:
pop {r1-r8,lr}
bx lr @ return
/******************************************************************/
/* merge sort */
/******************************************************************/
/* r0 contains the address of table */
/* r1 contains the index of first element */
/* r2 contains the number of element */
mergeSort:
push {r3-r7,lr} @ save registers
cmp r2,#2
blt 100f
lsr r4,r2,#1 @ number of element of each subset
tst r2,#1
addne r4,#1
mov r5,r1 @ save first element
mov r6,r2 @ save number of element
mov r7,r4 @ save number of element of each subset
mov r2,r4
bl mergeSort
mov r1,r7 @ restaur number of element of each subset
mov r2,r6 @ restaur number of element
sub r2,r1
mov r3,r5 @ restaur first element
add r1,r3 @ + 1
bl mergeSort @ sort first subset
mov r1,r5 @ restaur first element
mov r2,r7 @ restaur number of element of each subset
add r2,r1
mov r3,r6 @ restaur number of element
add r3,r1
sub r3,#1 @ last index
bl merge
100:
pop {r3-r7,lr}
bx lr @ return
/******************************************************************/
/* Display table elements */
/******************************************************************/
/* r0 contains the address of table */
displayTable:
push {r0-r3,lr} @ save registers
mov r2,r0 @ table address
mov r3,#0
1: @ loop display table
ldr r0,[r2,r3,lsl #2]
ldr r1,iAdrsZoneConv @
bl conversion10S @ décimal conversion
ldr r0,iAdrsMessResult
ldr r1,iAdrsZoneConv @ insert conversion
bl strInsertAtCharInc
bl affichageMess @ display message
add r3,#1
cmp r3,#NBELEMENTS - 1
ble 1b
ldr r0,iAdrszCarriageReturn
bl affichageMess
mov r0,r2
100:
pop {r0-r3,lr}
bx lr
iAdrsZoneConv: .int sZoneConv
/***************************************************/
/* ROUTINES INCLUDE */
/***************************************************/
.include "../affichage.inc"
</syntaxhighlight>
=={{header|Arturo}}==
<syntaxhighlight lang="arturo">merge: function [a,b,left,middle,right][
leftLen: middle - left
rightLen: right - middle
l: 0
r: leftLen
loop left..dec middle 'i [
b\[l]: a\[i]
l: l + 1
]
loop middle..dec right 'i [
b\[r]: a\[i]
r: r + 1
]
l: 0
r: leftLen
i: left
while [and? l < leftLen r < leftLen + rightLen][
if? b\[l] < b\[r] [
a\[i]: b\[l]
l: l + 1
]
else [
a\[i]: b\[r]
r: r + 1
]
i: i + 1
]
while [l < leftLen][
a\[i]: b\[l]
l: l + 1
i: i + 1
]
while [r < leftLen + rightLen][
a\[i]: b\[r]
r: r + 1
i: i + 1
]
]
mergeLR: function [a,b,left,right][
if 1 >= right - left -> return ø
mid: (left + right) / 2
mergeLR a b left mid
mergeLR a b mid right
merge a b left mid right
]
mergeSort: function [arr][
result: new arr
b: new array.of:size result 0
mergeLR result b 0 size result
return result
]
print mergeSort [3 1 2 8 5 7 9 4 6]</syntaxhighlight>
{{out}}
<pre>1 2 3 4 5 6 7 8 9</pre>
=={{header|Astro}}==
<syntaxhighlight lang="python">fun mergesort(m):
if m.lenght <= 1: return m
let middle = floor m.lenght / 2
let left = merge(m[:middle])
let right = merge(m[middle-1:]);
fun merge(left, right):
let result = []
while not (left.isempty or right.isempty):
if left[1] <= right[1]:
result.push! left.shift!()
else:
result.push! right.shift!()
result.push! left.push! right
let arr = [7, 6, 5, 9, 8, 4, 3, 1, 2, 0]
print mergesort arr</syntaxhighlight>
=={{Header|ATS}}==
=== A mergesort for linear lists ===
This algorithm modifies the links in the list, rather than allocate new cons-pairs. It requires no garbage collector.
<syntaxhighlight lang="ats">(*------------------------------------------------------------------*)
(* Mergesort in ATS2, for linear lists. *)
(*------------------------------------------------------------------*)
#include "share/atspre_staload.hats"
staload UN = "prelude/SATS/unsafe.sats"
#define NIL list_vt_nil ()
#define :: list_vt_cons
(*------------------------------------------------------------------*)
(* Destructive stable merge. *)
extern fun {a : vt@ype}
list_vt_merge {m, n : int}
(lst1 : list_vt (a, m),
lst2 : list_vt (a, n))
:<!wrt> list_vt (a, m + n)
(* Order predicate for list_vt_merge. You have to implement this to
suit your needs. *)
extern fun {a : vt@ype}
list_vt_merge$lt : (&a, &a) -<> bool
(* Destructive stable mergesort. *)
extern fun {a : vt@ype}
list_vt_mergesort {n : int}
(lst : list_vt (a, n))
:<!wrt> list_vt (a, n)
(* Order predicate for list_vt_mergesort. You have to implement this
to suit your needs. *)
extern fun {a : vt@ype}
list_vt_mergesort$lt : (&a, &a) -<> bool
(*------------------------------------------------------------------*)
implement {a}
list_vt_merge {m, n} (lst1, lst2) =
let
macdef lt = list_vt_merge$lt<a>
fun
loop {m, n : nat} .<m + n>.
(lst1 : list_vt (a, m),
lst2 : list_vt (a, n),
lst_merged : &List_vt a? >> list_vt (a, m + n))
:<!wrt> void =
case+ lst1 of
| ~ NIL => lst_merged := lst2
| @ elem1 :: tail1 =>
begin
case+ lst2 of
| ~ NIL =>
let
prval () = fold@ lst1
in
lst_merged := lst1
end
| @ elem2 :: tail2 =>
if ~(elem2 \lt elem1) then
let
val () = lst_merged := lst1
prval () = fold@ lst2
val () = loop (tail1, lst2, tail1)
prval () = fold@ lst_merged
in
end
else
let
val () = lst_merged := lst2
prval () = fold@ lst1
val () = loop (lst1, tail2, tail2)
prval () = fold@ lst_merged
in
end
end
prval () = lemma_list_vt_param lst1 (* Proves 0 <= m. *)
prval () = lemma_list_vt_param lst2 (* Proves 0 <= n. *)
prval () = prop_verify {0 <= m} ()
prval () = prop_verify {0 <= n} ()
var lst_merged : List_vt a?
val () = loop {m, n} (lst1, lst2, lst_merged)
in
lst_merged
end
(*------------------------------------------------------------------*)
implement {a}
list_vt_mergesort {n} lst =
let
implement
list_vt_merge$lt<a> (x, y) =
list_vt_mergesort$lt<a> (x, y)
(* You can make SMALL larger than 1 and write small_sort as a fast
stable sort for small lists. *)
#define SMALL 1
fn
small_sort {m : pos | m <= SMALL}
(lst : list_vt (a, m),
m : int m)
:<!wrt> list_vt (a, m) =
lst
fun
recurs {m : pos} .<m>.
(lst : list_vt (a, m),
m : int m)
:<!wrt> list_vt (a, m) =
if m <= SMALL then
small_sort (lst, m)
else
let
prval () = prop_verify {2 <= m} ()
val i = m / 2
val @(lst1, lst2) = list_vt_split_at<a> (lst, i)
val lst1 = recurs (lst1, i)
val lst2 = recurs (lst2, m - i)
in
list_vt_merge<a> (lst1, lst2)
end
prval () = lemma_list_vt_param lst (* Proves 0 <= n. *)
prval () = prop_verify {0 <= n} ()
in
case+ lst of
| NIL => lst
| _ :: _ => recurs (lst, length lst)
end
(*------------------------------------------------------------------*)
extern fun
list_vt_mergesort_int {n : int}
(lst : list_vt (int, n))
:<!wrt> list_vt (int, n)
implement
list_vt_mergesort_int {n} lst =
let
implement
list_vt_mergesort$lt<int> (x, y) =
x < y
in
list_vt_mergesort<int> {n} lst
end
implement
main0 () =
let
val lst = $list_vt (22, 15, 98, 82, 22, 4, 58, 70, 80, 38, 49,
48, 46, 54, 93, 8, 54, 2, 72, 84, 86, 76,
53, 37, 90)
val () = println! ("before : ", $UN.castvwtp1{List int} lst)
val lst = list_vt_mergesort_int lst
val () = println! ("after : ", $UN.castvwtp1{List int} lst)
in
list_vt_free<int> lst
end
(*------------------------------------------------------------------*)</syntaxhighlight>
{{out}}
<pre>$ patscc -O3 -DATS_MEMALLOC_LIBC mergesort_task_for_list_vt.dats && ./a.out
before : 22, 15, 98, 82, 22, 4, 58, 70, 80, 38, 49, 48, 46, 54, 93, 8, 54, 2, 72, 84, 86, 76, 53, 37, 90
after : 2, 4, 8, 15, 22, 22, 37, 38, 46, 48, 49, 53, 54, 54, 58, 70, 72, 76, 80, 82, 84, 86, 90, 93, 98</pre>
Footnote: Rather than directly write a mergesort for "ordinary" non-linear lists, I would write a routine to do the following:
* make a copy of the list;
* cast the copy to a linear list;
* sort the linear list;
* cast the result to non-linear list, and return the casted result.
This way, new cons-pairs are allocated only once.
The same thing can be done in other languages, of course. An interesting thing about this ATS implementation, though, is it proves the result is of the same length as the input. It does not, however, prove that the result satisfies the order predicate.
===A mergesort for non-linear lists of integers, guaranteeing a sorted result===
The following program not only sorts a list of integers, but verifies that the result is sorted. It is the simplest implementation I could think of that does that. It works by having a special kind of list that can be consed only in sorted order.
The length of the result also is verified. However, there is no proof that the result contains the same data as the input.
<syntaxhighlight lang="ats">//--------------------------------------------------------------------
//
// A mergesort for 32-bit signed integers.
//
//--------------------------------------------------------------------
#include "share/atspre_staload.hats"
(*------------------------------------------------------------------*)
#define ENTIER_MAX 2147483647
(* We do not include the most negative two's-complement number. *)
stadef entier (i : int) = ~ENTIER_MAX <= i && i <= ENTIER_MAX
sortdef entier = {i : int | entier i}
typedef entier (i : int) = [entier i] int i
typedef entier = [i : entier] entier i
datatype sorted_entier_list (int, int) =
| sorted_entier_list_nil (0, ENTIER_MAX)
| {n : nat}
{i, j : entier | ~(j < i)}
sorted_entier_list_cons (n + 1, i) of
(entier i, sorted_entier_list (n, j))
typedef sorted_entier_list (n : int) =
[i : entier] sorted_entier_list (n, i)
typedef sorted_entier_list =
[n : int] sorted_entier_list n
infixr ( :: ) :::
#define NIL list_nil ()
#define :: list_cons
#define SNIL sorted_entier_list_nil ()
#define ::: sorted_entier_list_cons
(*------------------------------------------------------------------*)
extern prfn
lemma_sorted_entier_list_param
{n : int}
(lst : sorted_entier_list n)
:<prf> [0 <= n] void
extern fn
sorted_entier_list_length
{n : int}
(lst : sorted_entier_list n)
:<> [0 <= n] int n
extern fn
sorted_entier_list_merge
{m, n : int}
{i, j : entier}
(lst1 : sorted_entier_list (m, i),
lst2 : sorted_entier_list (n, j))
:<> sorted_entier_list (m + n, min (i, j))
extern fn
entier_list_mergesort
{n : int}
(lst : list (entier, n)) (* An ordinary list. *)
:<!wrt> sorted_entier_list n
extern fn
sorted_entier_list2list
{n : int}
(lst : sorted_entier_list n)
:<> list (entier, n)
overload length with sorted_entier_list_length
overload merge with sorted_entier_list_merge
overload mergesort with entier_list_mergesort
overload to_list with sorted_entier_list2list
(*------------------------------------------------------------------*)
primplement
lemma_sorted_entier_list_param {n} lst =
case+ lst of
| SNIL => ()
| _ ::: _ => ()
implement
sorted_entier_list_length {n} lst =
(* This implementation is tail-recursive. *)
let
fun
count {m : nat | m <= n} .<n - m>.
(lst : sorted_entier_list (n - m),
m : int m)
:<> [0 <= n] int n =
case+ lst of
| SNIL => m
| _ ::: tail => count {m + 1} (tail, succ m)
prval () = lemma_sorted_entier_list_param lst
in
count (lst, 0)
end
implement
sorted_entier_list_merge (lst1, lst2) =
(* This implementation is *NOT* tail recursive. It will use O(m+n)
stack space. *)
let
fun
recurs {m, n : nat}
{i, j : entier} .<m + n>.
(lst1 : sorted_entier_list (m, i),
lst2 : sorted_entier_list (n, j))
:<> sorted_entier_list (m + n, min (i, j)) =
case+ lst1 of
| SNIL => lst2
| i ::: tail1 =>
begin
case+ lst2 of
| SNIL => lst1
| j ::: tail2 =>
if ~(j < i) then
i ::: recurs (tail1, lst2)
else
j ::: recurs (lst1, tail2)
end
prval () = lemma_sorted_entier_list_param lst1
prval () = lemma_sorted_entier_list_param lst2
in
recurs (lst1, lst2)
end
implement
entier_list_mergesort lst =
let
fun
recurs {m : nat} .<m>.
(lst : list (entier, m),
m : int m)
:<!wrt> sorted_entier_list m =
if m = 1 then
let
val+ head :: NIL = lst
in
head ::: SNIL
end
else if m = 0 then
SNIL
else
let
val m_left = m \g1int_ndiv 2
val m_right = m - m_left
val @(left, right) = list_split_at (lst, m_left)
val left = recurs (list_vt2t left, m_left)
and right = recurs (right, m_right)
in
left \merge right
end
prval () = lemma_list_param lst
in
recurs (lst, length lst)
end
implement
sorted_entier_list2list lst =
(* This implementation is *NOT* tail recursive. It will use O(n)
stack space. *)
let
fun
recurs {n : nat} .<n>.
(lst : sorted_entier_list n)
:<> list (entier, n) =
case+ lst of
| SNIL => NIL
| head ::: tail => head :: recurs tail
prval () = lemma_sorted_entier_list_param lst
in
recurs lst
end
(*------------------------------------------------------------------*)
fn
print_Int_list
{n : int}
(lst : list (Int, n))
: void =
let
fun
loop {n : nat} .<n>.
(lst : list (Int, n))
: void =
case+ lst of
| NIL => ()
| head :: tail =>
begin
print! (" ");
print! (head);
loop tail
end
prval () = lemma_list_param lst
in
loop lst
end
implement
main0 () =
let
val example_list =
$list (22, 15, 98, 82, 22, 4, 58, 70, 80, 38, 49, 48, 46, 54,
93, 8, 54, 2, 72, 84, 86, 76, 53, 37, 90)
val sorted_list = mergesort example_list
in
print! ("unsorted ");
print_Int_list example_list;
println! ();
print! ("sorted ");
print_Int_list (to_list sorted_list);
println! ()
end
(*------------------------------------------------------------------*)</syntaxhighlight>
{{out}}
<pre>patscc -O3 -DATS_MEMALLOC_GCBDW mergesort_task_verified.dats -lgc && ./a.out
unsorted 22 15 98 82 22 4 58 70 80 38 49 48 46 54 93 8 54 2 72 84 86 76 53 37 90
sorted 2 4 8 15 22 22 37 38 46 48 49 53 54 54 58 70 72 76 80 82 84 86 90 93 98</pre>
''Postscript''. One might try adding a line such as
<pre>val x = 3 ::: 2 ::: SNIL</pre>
to the program and see that the compiler will report it as erroneous, on grounds that "2 is not less than 3" is unsatisfied.
== [[AutoHotkey_L]] ==
AutoHotkey_L has true array support and can dynamically grow and shrink its arrays at run time.
This version of Merge Sort only needs '''n''' locations to sort.
[http://www.autohotkey.com/forum/viewtopic.php?t=77693&highlight=| AHK forum post]
<syntaxhighlight lang="autohotkey">#NoEnv
Test := []
Loop 100 {
Random n, 0, 999
Test.Insert(n)
}
Result := MergeSort(Test)
Loop % Result.MaxIndex() {
MsgBox, 1, , % Result[A_Index]
IfMsgBox Cancel
Break
}
Return
/*
Function MergeSort
Sorts an array by first recursively splitting it down to its
individual elements and then merging those elements in their
correct order.
Parameters
Array The array to be sorted
Returns
The sorted array
*/
MergeSort(Array)
{
; Return single element arrays
If (! Array.HasKey(2))
Return Array
; Split array into Left and Right halfs
Left := [], Right := [], Middle := Array.MaxIndex() // 2
Loop % Middle
Right.Insert(Array.Remove(Middle-- + 1)), Left.Insert(Array.Remove(1))
If (Array.MaxIndex())
Right.Insert(Array.Remove(1))
Left := MergeSort(Left), Right := MergeSort(Right)
; If all the Right values are greater than all the
; Left values, just append Right at the end of Left.
If (Left[Left.MaxIndex()] <= Right[1]) {
Loop % Right.MaxIndex()
Left.Insert(Right.Remove(1))
Return Left
}
; Loop until one of the arrays is empty
While(Left.MaxIndex() and Right.MaxIndex())
Left[1] <= Right[1] ? Array.Insert(Left.Remove(1))
: Array.Insert(Right.Remove(1))
Loop % Left.MaxIndex()
Array.Insert(Left.Remove(1))
Loop % Right.MaxIndex()
Array.Insert(Right.Remove(1))
Return Array
}</syntaxhighlight>
=={{header|AutoHotkey}}==
<
MsgBox % MSort("xxx")
MsgBox % MSort("3,2,1")
Line 265 ⟶ 1,859:
}
}
}</syntaxhighlight>
=={{header|BASIC}}==
==={{header|BBC BASIC}}===
<syntaxhighlight lang="bbcbasic">DEFPROC_MergeSort(Start%,End%)
REM *****************************************************************
REM This procedure Merge Sorts the chunk of data% bounded by
REM Start% & End%.
REM *****************************************************************
LOCAL Middle%
IF End%=Start% ENDPROC
IF End%-Start%=1 THEN
IF data%(End%)<data%(Start%) THEN
SWAP data%(Start%),data%(End%)
ENDIF
ENDPROC
ENDIF
Middle%=Start%+(End%-Start%)/2
PROC_MergeSort(Start%,Middle%)
PROC_MergeSort(Middle%+1,End%)
PROC_Merge(Start%,Middle%,End%)
ENDPROC
:
DEF PROC_Merge(Start%,Middle%,End%)
LOCAL fh_size%
fh_size% = Middle%-Start%+1
FOR I%=0 TO fh_size%-1
fh%(I%)=data%(Start%+I%)
NEXT I%
I%=0
J%=Middle%+1
K%=Start%
REPEAT
IF fh%(I%) <= data%(J%) THEN
data%(K%)=fh%(I%)
I%+=1
K%+=1
ELSE
data%(K%)=data%(J%)
J%+=1
K%+=1
ENDIF
UNTIL I%=fh_size% OR J%>End%
WHILE I% < fh_size%
data%(K%)=fh%(I%)
I%+=1
K%+=1
ENDWHILE
ENDPROC</syntaxhighlight>
Usage would look something like this example which sorts a series of 1000 random integers:
<syntaxhighlight lang="bbcbasic">REM Example of merge sort usage.
Size%=1000
S1%=Size%/2
DIM data%(Size%)
DIM fh%(S1%)
FOR I%=1 TO Size%
data%(I%)=RND(100000)
NEXT
PROC_MergeSort(1,Size%)
END</syntaxhighlight>
==={{header|Chipmunk Basic}}===
{{works with|Chipmunk Basic|3.6.4}}
{{trans|Quite BASIC}}
<syntaxhighlight lang="qbasic">100 REM Sorting algorithms/Merge sort
110 CLS
120 LET N = 10
130 LET C = 0
140 OPTION BASE 1
150 DIM A(10)
160 DIM B(10)
170 RANDOMIZE TIMER
180 GOSUB 810
190 REM Print the random array
200 PRINT "unsort ";
210 GOSUB 860
220 REM Sort the array
230 GOSUB 300
240 PRINT " sort ";
250 REM Print the sorted array
260 GOSUB 860
270 PRINT "Number of iterations: ";C
290 END
300 REM Merge sort the list A of length N
310 REM Using the array B for temporary storage
320 REM
330 REM === Split phase ===
340 REM C counts the number of split/merge iterations
350 LET C = C+1
360 LET X = 1
370 LET Y = 1
380 LET Z = N
390 GOTO 410
400 IF A(X) < A(X-1) THEN GOTO 470
410 LET B(Y) = A(X)
420 LET Y = Y+1
430 LET X = X+1
440 IF Z < Y THEN GOTO 500
450 GOTO 400
460 IF A(X) < A(X-1) THEN GOTO 410
470 LET B(Z) = A(X)
480 LET Z = Z-1
490 LET X = X+1
500 IF Z < Y THEN GOTO 530
510 GOTO 460
520 REM
530 REM === Merge Phase ===
540 REM Q means "we're done" (or "quit")
550 REM Q is 1 until we know that this is _not_ the last iteration
560 LET Q = 1
570 LET X = 1
580 LET Y = 1
590 LET Z = N
600 REM First select the smaller item
610 IF B(Y) < B(Z) THEN GOTO 710 ELSE GOTO 750
620 REM Check if the loop is done
630 IF Z < Y THEN GOTO 790
640 REM If both items are smaller then start over with the smallest
650 IF B(Y) >= A(X-1) OR B(Z) >= A(X-1) THEN GOTO 680
660 LET Q = 0
670 GOTO 600
680 REM Pick the smallest item that represents an increase
690 IF B(Z) < B(Y) AND B(Z) >= A(X-1) THEN GOTO 750
700 IF B(Z) > B(Y) AND B(Y) < A(X-1) THEN GOTO 750
710 LET A(X) = B(Y)
720 LET Y = Y+1
730 LET X = X+1
740 GOTO 620
750 LET A(X) = B(Z)
760 LET Z = Z-1
770 LET X = X+1
780 GOTO 620
790 IF Q = 0 THEN GOTO 330
800 RETURN
810 REM Create a random list of N integers
820 FOR I = 1 TO N
830 LET A(I) = FLOOR(RND(100))
840 NEXT I
850 RETURN
860 REM PRINT the list A
870 FOR I = 1 TO N
880 PRINT A(I);" ";
890 NEXT I
900 PRINT
910 RETURN</syntaxhighlight>
==={{header|Minimal BASIC}}===
{{trans|Quite BASIC}}
<syntaxhighlight lang="qbasic">120 LET N = 10
130 LET C = 0
140 OPTION BASE 1
150 DIM A(10)
160 DIM B(10)
170 RANDOMIZE
180 GOSUB 810
190 REM Print the random array
200 PRINT "unsort ";
210 GOSUB 860
220 REM Sort the array
230 GOSUB 300
240 PRINT " sort ";
250 REM Print the sorted array
260 GOSUB 860
270 PRINT "Number of iterations: "; C
290 GOTO 950
300 REM Merge sort the list A of length N
310 REM Using the array B for temporary storage
320 REM
330 REM === Split phase ===
340 REM C counts the number of split/merge iterations
350 LET C = C+1
360 LET X = 1
370 LET Y = 1
380 LET Z = N
390 GOTO 410
400 IF A(X) < A(X-1) THEN 470
410 LET B(Y) = A(X)
420 LET Y = Y+1
430 LET X = X+1
440 IF Z < Y THEN 500
450 GOTO 400
460 IF A(X) < A(X-1) THEN 410
470 LET B(Z) = A(X)
480 LET Z = Z-1
490 LET X = X+1
500 IF Z < Y THEN 530
510 GOTO 460
520 REM
530 REM === Merge Phase ===
540 REM Q means "we're done" (or "quit")
550 REM Q is 1 until we know that this is _not_ the last iteration
560 LET Q = 1
570 LET X = 1
580 LET Y = 1
590 LET Z = N
600 REM First select the smaller item
610 IF B(Y) < B(Z) THEN 710
615 IF B(Y) > B(Z) THEN 750
620 REM Check if the loop is done
630 IF Z < Y THEN 790
640 REM If both items are smaller then start over with the smallest
650 IF B(Y) >= A(X-1) THEN 680
655 IF B(Z) >= A(X-1) THEN 680
660 LET Q = 0
670 GOTO 600
680 REM Pick the smallest item that represents an increase
690 IF B(Z) < B(Y) THEN 695
692 IF B(Z) > B(Y) THEN 700
695 IF B(Z) >= A(X-1) THEN 750
700 IF B(Z) > B(Y) THEN 705
705 IF B(Y) < A(X-1) THEN 750
710 LET A(X) = B(Y)
720 LET Y = Y+1
730 LET X = X+1
740 GOTO 620
750 LET A(X) = B(Z)
760 LET Z = Z-1
770 LET X = X+1
780 GOTO 620
790 IF Q = 0 THEN 330
800 RETURN
810 REM Create a random list of N integers
820 FOR I = 1 TO N
830 LET A(I) = INT((RND * 100) + .5)
840 NEXT I
850 RETURN
860 REM PRINT the list A
870 FOR I = 1 TO N
880 PRINT A(I); " ";
890 NEXT I
900 PRINT
910 RETURN
950 END</syntaxhighlight>
==={{header|Quite BASIC}}===
<syntaxhighlight lang="qbasic">100 REM Sorting algorithms/Merge sort
110 CLS
120 LET N = 10
130 LET C = 0
150 ARRAY A
160 ARRAY B
180 GOSUB 810
190 REM Print the random array
200 PRINT "unsort ";
210 GOSUB 860
220 REM Sort the array
230 GOSUB 300
240 PRINT " sort ";
250 REM Print the sorted array
260 GOSUB 860
270 PRINT "Number of iterations: "; C
290 END
300 REM Merge sort the list A of length N
310 REM Using the array B for temporary storage
320 REM
330 REM === Split phase ===
340 REM C counts the number of split/merge iterations
350 LET C = C+1
360 LET X = 1
370 LET Y = 1
380 LET Z = N
390 GOTO 410
400 IF A(X) < A(X-1) THEN GOTO 470
410 LET B(Y) = A(X)
420 LET Y = Y+1
430 LET X = X+1
440 IF Z < Y THEN GOTO 500
450 GOTO 400
460 IF A(X) < A(X-1) THEN GOTO 410
470 LET B(Z) = A(X)
480 LET Z = Z-1
490 LET X = X+1
500 IF Z < Y THEN GOTO 530
510 GOTO 460
520 REM
530 REM === Merge Phase ===
540 REM Q means "we're done" (or "quit")
550 REM Q is 1 until we know that this is _not_ the last iteration
560 LET Q = 1
570 LET X = 1
580 LET Y = 1
590 LET Z = N
600 REM First select the smaller item
610 IF B(Y) < B(Z) THEN GOTO 710 ELSE GOTO 750
620 REM Check if the loop is done
630 IF Z < Y THEN GOTO 790
640 REM If both items are smaller then start over with the smallest
650 IF B(Y) >= A(X-1) OR B(Z) >= A(X-1) THEN GOTO 680
660 LET Q = 0
670 GOTO 600
680 REM Pick the smallest item that represents an increase
690 IF B(Z) < B(Y) AND B(Z) >= A(X-1) THEN GOTO 750
700 IF B(Z) > B(Y) AND B(Y) < A(X-1) THEN GOTO 750
710 LET A(X) = B(Y)
720 LET Y = Y+1
730 LET X = X+1
740 GOTO 620
750 LET A(X) = B(Z)
760 LET Z = Z-1
770 LET X = X+1
780 GOTO 620
790 IF Q = 0 THEN GOTO 330
800 RETURN
810 REM Create a random list of N integers
820 FOR I = 1 TO N
830 LET A(I) = FLOOR(RND(100))
840 NEXT I
850 RETURN
860 REM PRINT the list A
870 FOR I = 1 TO N
880 PRINT A(I); " ";
890 NEXT I
900 PRINT
910 RETURN</syntaxhighlight>
=={{header|BCPL}}==
<syntaxhighlight lang="bcpl">get "libhdr"
let mergesort(A, n) be if n >= 2
$( let m = n / 2
mergesort(A, m)
mergesort(A+m, n-m)
merge(A, n, m)
$)
and merge(A, n, m) be
$( let i, j = 0, m
let x = getvec(n)
for k=0 to n-1
x!k := A!valof
test j~=n & (i=m | A!j < A!i)
$( j := j + 1
resultis j - 1
$)
else
$( i := i + 1
resultis i - 1
$)
for i=0 to n-1 do a!i := x!i
freevec(x)
$)
let write(s, A, len) be
$( writes(s)
for i=0 to len-1 do writed(A!i, 4)
wrch('*N')
$)
let start() be
$( let array = table 4,65,2,-31,0,99,2,83,782,1
let length = 10
write("Before: ", array, length)
mergesort(array, length)
write("After: ", array, length)
$)</syntaxhighlight>
{{out}}
<pre>Before: 4 65 2 -31 0 99 2 83 782 1
After: -31 0 1 2 2 4 65 83 99 782</pre>
=={{header|C}}==
<
#include <stdlib.h>
void merge (int *a, int n, int m) {
int i, j, k;
int *x = malloc(n * sizeof (int));
for (i = 0, j = m, k = 0; k < n; k++) {
x[k] = j == n ? a[i++]
: i == m ? a[j++]
: a[j] < a[i] ? a[j++]
: a[i++];
}
for (i = 0; i < n; i++) {
a[i] = x[i];
}
free(x);
}
void merge_sort (int *a, int n) {
if (n < 2)
return;
int m = n / 2;
merge_sort(a, m);
merge_sort(a + m, n - m);
merge(a, n, m);
}
int main () {
int a[] = {4, 65, 2, -31, 0, 99, 2, 83, 782, 1};
int n = sizeof a / sizeof a[0];
int i;
for (i = 0; i < n; i++)
printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
merge_sort(a, n);
for (i = 0; i < n; i++)
printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
return 0;
}</syntaxhighlight>
{{out}}
<pre>
4 65 2 -31 0 99 2 83 782 1
-31 0 1 2 2 4 65 83 99 782
</pre>
Non-recursive variant:
<syntaxhighlight lang="c">#include <stdio.h>
#include <stdlib.h>
#include <string.h>
/* x and y are sorted, copy nx+ny sorted values to r */
int i= 0, j= 0, k= 0;
while (i<nx && j<ny) {
if (a<b) {
i++;
} else {
r[k++]= b;
j++;
}
}
if (i<nx) {
memcpy(r+k, i+x, (nx-i)*sizeof (int));
} else if (j<ny) {
memcpy(r+k, j+y, (ny-j)*sizeof (int));
}
}
void mergesort(int ny, int *y) {
for (int i= 0; i<ny; i+= stride) {
if (i+stride >= ny) {
if (i+mid >= ny) {
memcpy(i+x, i+y, (ny-i)*sizeof (int));
continue;
}
lim= ny-(i+mid);
}
merge(mid, i+y, lim, i+mid+y, i+x);
}
t= x; x= y; y=t;
}
if (y!=r) {
memcpy(r, y, ny*sizeof(int));
x= y;
}
}
int main () {
int a[] = {4, 65, 2, -31, 0, 99, 2, 83, 782, 1};
int n = sizeof a / sizeof a[0];
int i;
for (i = 0; i < n; i++)
printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
mergesort(n, a);
for (i = 0; i < n; i++)
printf("%d%s", a[i], i == n - 1 ? "\n" : " ");
return 0;
}</syntaxhighlight>
{{out}}
<pre>
4 65 2 -31 0 99 2 83 782 1
-31 0 1 2 2 4 65 83 99 782</pre>
=={{header|C sharp|C#}}==
{{works with|C sharp|C#|3.0+}}
<syntaxhighlight lang="csharp">namespace RosettaCode {
using System;
public class MergeSort<T> where T : IComparable {
#region Constants
public const UInt32 INSERTION_LIMIT_DEFAULT = 12;
public const Int32 MERGES_DEFAULT = 6;
#endregion
#region Properties
public UInt32 InsertionLimit { get; }
protected UInt32[] Positions { get; set; }
private Int32 merges;
public Int32 Merges {
get { return merges; }
// A minimum of 2 merges are required
if (value > 1)
merges = value;
else
throw new ArgumentOutOfRangeException($"value = {value} must be greater than one", nameof(Merges));
if (Positions == null || Positions.Length != merges)
Positions = new UInt32[merges];
}
#endregion
#region Constructors
public MergeSort(UInt32 insertionLimit, Int32 merges) {
InsertionLimit = insertionLimit;
Merges = merges;
}
public MergeSort()
: this(INSERTION_LIMIT_DEFAULT, MERGES_DEFAULT) {
}
#endregion
#region Sort Methods
public void Sort(T[] entries) {
// Allocate merge buffer
var entries2 = new T[entries.Length];
Sort(entries, entries2, 0, entries.Length - 1);
}
// Top-Down K-way Merge Sort
public void Sort(T[] entries1, T[] entries2, Int32 first, Int32 last) {
var length = last + 1 - first;
if (length < 2) return;
if (length < Merges || length < InsertionLimit) {
InsertionSort<T>.Sort(entries1, first, last);
return;
}
var left = first;
var size = ceiling(length, Merges);
for (var remaining = length; remaining > 0; remaining -= size, left += size) {
var right = left + Math.Min(remaining, size) - 1;
Sort(entries1, entries2, left, right);
}
Merge(entries1, entries2, first, last);
Array.Copy(entries2, first, entries1, first, length);
}
#endregion
#region Merge Methods
public void Merge(T[] entries1, T[] entries2, Int32 first, Int32 last) {
Array.Clear(Positions, 0, Merges);
// This implementation has a quadratic time dependency on the number of merges
for (var index = first; index <= last; index++)
entries2[index] = remove(entries1, first, last);
}
private T remove(T[] entries, Int32 first, Int32 last) {
T entry = default;
Int32? found = default;
var length = last + 1 - first;
var index = 0;
var left = first;
var size = ceiling(length, Merges);
for (var remaining = length; remaining > 0; remaining -= size, left += size, index++) {
var position = Positions[index];
if (position < Math.Min(remaining, size)) {
var next = entries[left + position];
if (!found.HasValue || entry.CompareTo(next) > 0) {
found = index;
entry = next;
}
}
}
// Remove entry
Positions[found.Value]++;
return entry;
}
#endregion
#region Math Methods
private static Int32 ceiling(Int32 numerator, Int32 denominator) {
return (numerator + denominator - 1) / denominator;
}
#endregion
}
#region Insertion Sort
static class InsertionSort<T> where T : IComparable {
public static void Sort(T[] entries, Int32 first, Int32 last) {
for (var next = first + 1; next <= last; next++)
insert(entries, first, next);
}
/// <summary>Bubble next entry up to its sorted location, assuming entries[first:next - 1] are already sorted.</summary>
private static void insert(T[] entries, Int32 first, Int32 next) {
var entry = entries[next];
while (next > first && entries[next - 1].CompareTo(entry) > 0)
entries[next] = entries[--next];
entries[next] = entry;
}
}
#endregion
}</syntaxhighlight>
'''Example''':
<syntaxhighlight lang="csharp"> using Sort;
using System;
class Program {
static void Main(String[] args) {
var entries = new Int32[] { 7, 5, 2, 6, 1, 4, 2, 6, 3 };
var sorter = new MergeSort<Int32>();
sorter.Sort(entries);
Console.WriteLine(String.Join(" ", entries));
}
}</syntaxhighlight>
{{out}}
<pre>1 2 2 3 4 5 6 6 7</pre>
=={{header|C++}}==
<
#include <algorithm> // for std::inplace_merge
#include <functional> // for std::less
Line 369 ⟶ 2,507:
{
mergesort(first, last, std::less<typename std::iterator_traits<RandomAccessIterator>::value_type>());
}</
=={{header|
{{trans|Haskell}}
<syntaxhighlight lang="lisp">
(defn merge [left right]
(cond (nil? left) right
(nil? right) left
:else (let [[l & *left] left
[r & *right] right]
(if (<= l r) (cons l (merge *left right))
(cons r (merge left *right))))))
(defn merge-sort [list]
(if (< (count list) 2)
list
(let [[left right] (split-at (/ (count list) 2) list)]
(merge (merge-sort left) (merge-sort right)))))
</syntaxhighlight>
=={{header|COBOL}}==
Cobol cannot do recursion, so this version simulates recursion. The working storage is therefore pretty complex, so I have shown the whole program, not just the working procedure division parts.
<syntaxhighlight lang="cobol"> IDENTIFICATION DIVISION.
PROGRAM-ID. MERGESORT.
AUTHOR. DAVE STRATFORD.
DATE-WRITTEN. APRIL 2010.
INSTALLATION. HEXAGON SYSTEMS LIMITED.
******************************************************************
* MERGE SORT *
* The Merge sort uses a completely different paradigm, one of *
* divide and conquer, to many of the other sorts. The data set *
* is split into smaller sub sets upon which are sorted and then *
* merged together to form the final sorted data set. *
* This version uses the recursive method. Split the data set in *
* half and perform a merge sort on each half. This in turn splits*
* each half again and again until each set is just one or 2 items*
* long. A set of one item is already sorted so is ignored, a set *
* of two is compared and swapped as necessary. The smaller data *
* sets are then repeatedly merged together to eventually form the*
* full, sorted, set. *
* Since cobol cannot do recursion this module only simulates it *
* so is not as fast as a normal recursive version would be. *
* Scales very well to larger data sets, its relative complexity *
* means it is not suited to sorting smaller data sets: use an *
* Insertion sort instead as the Merge sort is a stable sort. *
******************************************************************
ENVIRONMENT DIVISION.
CONFIGURATION
SOURCE-COMPUTER.
OBJECT-COMPUTER.
INPUT-OUTPUT SECTION.
FILE-CONTROL.
SELECT FA-INPUT-FILE ASSIGN FL01.
SELECT FB-OUTPUT-FILE ASSIGN FL02.
DATA DIVISION.
FILE SECTION.
FD FA-INPUT-FILE.
01 FA-INPUT-REC.
03 FA-DATA PIC 9(6).
FD FB-OUTPUT-FILE.
01 FB-OUTPUT-REC PIC 9(6).
WORKING-STORAGE SECTION.
01
03 WA-PROGNAME
03 WA-VERSION PIC X(6) VALUE "000001".
01 WB-TABLE.
03 WB-ENTRY PIC 9(8) COMP SYNC OCCURS 100000
INDEXED BY WB-IX-1
WB-IX-2.
01 WC-VARS.
03 WC-SIZE PIC S9(8) COMP SYNC.
03 WC-TEMP PIC S9(8) COMP SYNC.
03 WC-START PIC S9(8) COMP SYNC.
03 WC-MIDDLE PIC S9(8) COMP SYNC.
03 WC-END PIC S9(8) COMP SYNC.
01 WD-FIRST-HALF.
03 WD-FH-MAX PIC S9(8) COMP SYNC.
03 WD-ENTRY PIC 9(8) COMP SYNC OCCURS 50000
INDEXED BY WD-IX.
01 WF-CONDITION-FLAGS.
03 WF-EOF-FLAG PIC X.
88 END-OF-FILE VALUE "Y".
03 WF-EMPTY-FILE-FLAG PIC X.
88 EMPTY-FILE VALUE "Y".
01 WS-STACK.
* This stack is big enough to sort a list of 1million items.
03 WS-STACK-ENTRY OCCURS 20 INDEXED BY WS-STACK-TOP.
05 WS-START PIC S9(8) COMP SYNC.
05 WS-MIDDLE PIC S9(8) COMP SYNC.
05 WS-END PIC S9(8) COMP SYNC.
05 WS-FS-FLAG PIC X.
88 FIRST-HALF VALUE "F".
88 SECOND-HALF VALUE "S".
88 WS-ALL VALUE "A".
05 WS-IO-FLAG PIC X.
88 WS-IN VALUE "I".
88 WS-OUT VALUE "O".
PROCEDURE DIVISION.
A-MAIN SECTION.
A-000.
PERFORM B-INITIALISE.
IF NOT EMPTY-FILE
PERFORM C-PROCESS.
PERFORM D-FINISH.
A-999.
STOP RUN.
B-INITIALISE SECTION.
B-000.
DISPLAY "*** " WA-PROGNAME " VERSION "
WA-VERSION " STARTING ***".
MOVE ALL "N" TO WF-CONDITION-FLAGS.
OPEN INPUT FA-INPUT-FILE.
SET WB-IX-1 TO 0.
READ FA-INPUT-FILE AT END MOVE "Y" TO WF-EOF-FLAG
WF-EMPTY-FILE-FLAG.
PERFORM BA-READ-INPUT UNTIL END-OF-FILE.
CLOSE FA-INPUT-FILE.
SET WC-SIZE TO WB-IX-1.
B-999.
EXIT.
BA-READ-INPUT SECTION.
BA-000.
SET WB-IX-1 UP BY 1.
MOVE FA-DATA TO WB-ENTRY(WB-IX-1).
READ FA-INPUT-FILE AT END MOVE "Y" TO WF-EOF-FLAG.
BA-999.
EXIT.
C-PROCESS SECTION.
C-000.
DISPLAY "SORT STARTING".
MOVE 1 TO WS-START(1).
MOVE WC-SIZE TO WS-END(1).
MOVE "F" TO WS-FS-FLAG(1).
MOVE "I" TO WS-IO-FLAG(1).
SET WS-STACK-TOP TO 2.
PERFORM E-MERGE-SORT UNTIL WS-OUT(1).
DISPLAY "SORT FINISHED".
C-999.
EXIT.
D-FINISH SECTION.
D-000.
OPEN OUTPUT FB-OUTPUT-FILE.
SET WB-IX-1 TO 1.
PERFORM DA-WRITE-OUTPUT UNTIL WB-IX-1 > WC-SIZE.
CLOSE FB-OUTPUT-FILE.
DISPLAY "*** " WA-PROGNAME " FINISHED ***".
D-999.
EXIT.
DA-WRITE-OUTPUT SECTION.
DA-000.
WRITE FB-OUTPUT-REC FROM WB-ENTRY(WB-IX-1).
SET WB-IX-1 UP BY 1.
DA-999.
EXIT.
******************************************************************
E-MERGE-SORT SECTION.
*===================== *
* This section controls the simulated recursion. *
******************************************************************
E-000.
IF WS-OUT(WS-STACK-TOP - 1)
GO TO E-010.
MOVE WS-START(WS-STACK-TOP - 1) TO WC-START.
MOVE WS-END(WS-STACK-TOP - 1) TO WC-END.
* First check size of part we are dealing with.
IF WC-END - WC-START = 0
* Only 1 number in range, so simply set for output, and move on
MOVE "O" TO WS-IO-FLAG(WS-STACK-TOP - 1)
GO TO E-010.
IF WC-END - WC-START = 1
* 2 numbers, so compare and swap as necessary. Set for output
MOVE "O" TO WS-IO-FLAG(WS-STACK-TOP - 1)
IF WB-ENTRY(WC-START) > WB-ENTRY(WC-END)
MOVE WB-ENTRY(WC-START) TO WC-TEMP
MOVE WB-ENTRY(WC-END) TO WB-ENTRY(WC-START)
MOVE WC-TEMP TO WB-ENTRY(WC-END)
GO TO E-010
ELSE
GO TO E-010.
* More than 2, so split and carry on down
COMPUTE WC-MIDDLE = ( WC-START + WC-END ) / 2.
MOVE WC-START TO WS-START(WS-STACK-TOP).
MOVE WC-MIDDLE TO WS-END(WS-STACK-TOP).
MOVE "F" TO WS-FS-FLAG(WS-STACK-TOP).
MOVE "I" TO WS-IO-FLAG(WS-STACK-TOP).
SET WS-STACK-TOP UP BY 1.
GO TO E-999.
E-010.
SET WS-STACK-TOP DOWN BY 1.
IF SECOND-HALF(WS-STACK-TOP)
GO TO E-020.
MOVE WS-START(WS-STACK-TOP - 1) TO WC-START.
MOVE WS-END(WS-STACK-TOP - 1) TO WC-END.
COMPUTE WC-MIDDLE = ( WC-START + WC-END ) / 2 + 1.
MOVE WC-MIDDLE TO WS-START(WS-STACK-TOP).
MOVE WC-END TO WS-END(WS-STACK-TOP).
MOVE "S" TO WS-FS-FLAG(WS-STACK-TOP).
MOVE "I" TO WS-IO-FLAG(WS-STACK-TOP).
SET WS-STACK-TOP UP BY 1.
GO TO E-999.
E-020.
MOVE WS-START(WS-STACK-TOP - 1) TO WC-START.
MOVE WS-END(WS-STACK-TOP - 1) TO WC-END.
COMPUTE WC-MIDDLE = ( WC-START + WC-END ) / 2.
PERFORM H-PROCESS-MERGE.
MOVE "O" TO WS-IO-FLAG(WS-STACK-TOP - 1).
E-999.
EXIT.
******************************************************************
H-PROCESS-MERGE SECTION.
*======================== *
* This section identifies which data is to be merged, and then *
* merges the two data streams into a single larger data stream. *
******************************************************************
H-000.
INITIALISE WD-FIRST-HALF.
COMPUTE WD-FH-MAX = WC-MIDDLE - WC-START + 1.
SET WD-IX TO 1.
PERFORM HA-COPY-OUT VARYING WB-IX-1 FROM WC-START BY 1
UNTIL WB-IX-1 > WC-MIDDLE.
SET WB-IX-1 TO WC-START.
SET WB-IX-2 TO WC-MIDDLE.
SET WB-IX-2 UP BY 1.
SET WD-IX TO 1.
PERFORM HB-MERGE UNTIL WD-IX > WD-FH-MAX OR WB-IX-2 > WC-END.
PERFORM HC-COPY-BACK UNTIL WD-IX > WD-FH-MAX.
H-999.
EXIT.
HA-COPY-OUT SECTION.
HA-000.
MOVE WB-ENTRY(WB-IX-1) TO WD-ENTRY(WD-IX).
SET WD-IX UP BY 1.
HA-999.
EXIT.
HB-MERGE SECTION.
HB-000.
IF WB-ENTRY(WB-IX-2) < WD-ENTRY(WD-IX)
MOVE WB-ENTRY(WB-IX-2) TO WB-ENTRY(WB-IX-1)
SET WB-IX-2 UP BY 1
ELSE
MOVE WD-ENTRY(WD-IX) TO WB-ENTRY(WB-IX-1)
SET WD-IX UP BY 1.
SET WB-IX-1 UP BY 1.
HB-999.
EXIT.
HC-COPY-BACK SECTION.
HC-000.
MOVE WD-ENTRY(WD-IX) TO WB-ENTRY(WB-IX-1).
SET WD-IX UP BY 1.
SET WB-IX-1 UP BY 1.
HC-999.
EXIT.</syntaxhighlight>
=={{header|CoffeeScript}}==
<syntaxhighlight lang="coffeescript"># This is a simple version of mergesort that returns brand-new arrays.
# A more sophisticated version would do more in-place optimizations.
merge_sort = (arr) ->
if arr.length <= 1
return (elem for elem in arr)
m = Math.floor(arr.length / 2)
arr1 = merge_sort(arr.slice 0, m)
arr2 = merge_sort(arr.slice m)
result = []
p1 = p2 = 0
while true
if p1 >= arr1.length
if p2 >= arr2.length
return result
result.push arr2[p2]
p2 += 1
else if p2 >= arr2.length or arr1[p1] < arr2[p2]
result.push arr1[p1]
p1 += 1
else
result.push arr2[p2]
p2 += 1
do ->
console.log merge_sort [2,4,6,8,1,3,5,7,9,10,11,0,13,12]</syntaxhighlight>
{{out}}
<pre>
> coffee mergesort.coffee
[ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ]
</pre>
=={{header|Common Lisp}}==
<
(let ((split (floor (length sequence) 2)))
(if (zerop split)
Line 469 ⟶ 2,862:
(merge result-type (merge-sort result-type (subseq sequence 0 split) predicate)
(merge-sort result-type (subseq sequence split) predicate)
predicate))))</
<tt>merge</tt> is a standard Common Lisp function.
Line 475 ⟶ 2,868:
> (merge-sort 'list (list 1 3 5 7 9 8 6 4 2) #'<)
(1 2 3 4 5 6 7 8 9)
=={{header|Component Pascal}}==
{{works with|BlackBox Component Builder}}
Inspired by the approach used by the Modula-2[https://rosettacode.org/wiki/Sorting_algorithms/Merge_sort#Recursive_on_linked_list] application.
This an implementation of the stable merge sort algorithm for linked lists.
The merge sort algorithm is often the best choice for sorting a linked list.
The `Sort` procedure reduces the number of traversals by calculating the length only once at the beginning of the sorting process.
This optimization leads to a more efficient sorting process, making it faster, especially for large input lists.
Two modules are provided - for implementing and for using the merge sort .
<syntaxhighlight lang="oberon2">
MODULE RosettaMergeSort;
TYPE Template* = ABSTRACT RECORD END;
(* Abstract Procedures: *)
(* Return TRUE if list item`front` comes before list item `rear` in the sorted order, FALSE otherwise *)
(* For the sort to be stable `front` comes before `rear` if they are equal *)
PROCEDURE (IN t: Template) Before- (front, rear: ANYPTR): BOOLEAN, NEW, ABSTRACT;
(* Return the next item in the list after `s` *)
PROCEDURE (IN t: Template) Next- (s: ANYPTR): ANYPTR, NEW, ABSTRACT;
(* Update the next pointer of list item `s` to the value of list `next` - Return the modified `s` *)
PROCEDURE (IN t: Template) Set- (s, next: ANYPTR): ANYPTR, NEW, ABSTRACT;
(* Merge sorted lists `front` and `rear` - Return the merged sorted list *)
PROCEDURE (IN t: Template) Merge (front, rear: ANYPTR): ANYPTR, NEW;
BEGIN
IF front = NIL THEN RETURN rear END;
IF rear = NIL THEN RETURN front END;
IF t.Before(front, rear) THEN
RETURN t.Set(front, t.Merge(t.Next(front), rear))
ELSE
RETURN t.Set(rear, t.Merge(front, t.Next(rear)))
END
END Merge;
(* Sort the first `n` items in the list `s` and drop them from `s` *)
(* Return the sorted `n` items *)
PROCEDURE (IN t: Template) TakeSort (n: INTEGER; VAR s: ANYPTR): ANYPTR, NEW;
VAR k: INTEGER; front, rear: ANYPTR;
BEGIN
IF n = 1 THEN (* base case: if `n` is 1, return the head of `s` *)
front := s; s := t.Next(s); RETURN t.Set(front, NIL)
END;
(* Divide the first `n` items of `s` into two sorted parts *)
k := n DIV 2;
front := t.TakeSort(k, s);
rear := t.TakeSort(n - k, s);
RETURN t.Merge(front, rear) (* Return the merged parts *)
END TakeSort;
(* Perform a merge sort on `s` - Return the sorted list *)
PROCEDURE (IN t: Template) Sort* (s: ANYPTR): ANYPTR, NEW;
VAR n: INTEGER; r: ANYPTR;
BEGIN
IF s = NIL THEN RETURN s END; (* If `s` is empty, return `s` *)
(* Count of items in `s` *)
n := 0; r := s; (* Initialize the item to be counted to `s` *)
WHILE r # NIL DO INC(n); r := t.Next(r) END;
RETURN t.TakeSort(n, s) (* Return the sorted list *)
END Sort;
END RosettaMergeSort.
</syntaxhighlight>
Interface extracted from implementation:
<syntaxhighlight lang="oberon2">
DEFINITION RosettaMergeSort;
TYPE
Template = ABSTRACT RECORD
(IN t: Template) Before- (front, rear: ANYPTR): BOOLEAN, NEW, ABSTRACT;
(IN t: Template) Next- (s: ANYPTR): ANYPTR, NEW, ABSTRACT;
(IN t: Template) Set- (s, next: ANYPTR): ANYPTR, NEW, ABSTRACT;
(IN t: Template) Sort (s: ANYPTR): ANYPTR, NEW
END;
END RosettaMergeSort.
</syntaxhighlight>
Use the merge sort implementation from `RosettaMergeSort` to sort a linked list of characters:
<syntaxhighlight lang="oberon2">
MODULE RosettaMergeSortUse;
(* Import Modules: *)
IMPORT Sort := RosettaMergeSort, Out;
(* Type Definitions: *)
TYPE
(* a character list *)
List = POINTER TO RECORD
value: CHAR;
next: List
END;
(* Implement the abstract record type Sort.Template *)
Order = ABSTRACT RECORD (Sort.Template) END;
Asc = RECORD (Order) END;
Bad = RECORD (Order) END;
Desc = RECORD (Order) END;
(* Abstract Procedure Implementations: *)
(* Return the next node in the linked list *)
PROCEDURE (IN t: Order) Next (s: ANYPTR): ANYPTR;
BEGIN RETURN s(List).next END Next;
(* Set the next pointer of list item `s` to `next` - Return the updated `s` *)
PROCEDURE (IN t: Order) Set (s, next: ANYPTR): ANYPTR;
BEGIN
IF next = NIL THEN s(List).next := NIL
ELSE s(List).next := next(List) END;
RETURN s
END Set;
(* Ignoring case, compare characters to determine ascending order in the sorted list *)
(* For the sort to be stable `front` comes before `rear` if they are equal *)
PROCEDURE (IN t: Asc) Before (front, rear: ANYPTR): BOOLEAN;
BEGIN
RETURN CAP(front(List).value) <= CAP(rear(List).value)
END Before;
(* Unstable sort!!! *)
PROCEDURE (IN t: Bad) Before (front, rear: ANYPTR): BOOLEAN;
BEGIN
RETURN CAP(front(List).value) < CAP(rear(List).value)
END Before;
(* Ignoring case, compare characters to determine descending order in the sorted list *)
(* For the sort to be stable `front` comes before `rear` if they are equal *)
PROCEDURE (IN t: Desc) Before (front, rear: ANYPTR): BOOLEAN;
BEGIN
RETURN CAP(front(List).value) >= CAP(rear(List).value)
END Before;
(* Helper Procedures: *)
(* Takes a string and converts it into a linked list of characters *)
PROCEDURE Explode (str: ARRAY OF CHAR): List;
VAR i: INTEGER; h, t: List;
BEGIN
i := LEN(str$);
WHILE i # 0 DO
t := h; NEW(h);
DEC(i); h.value := str[i];
h.next := t
END;
RETURN h
END Explode;
(* Outputs the characters in a linked list as a string in quotes *)
PROCEDURE Show (s: List);
VAR i: INTEGER;
BEGIN
Out.Char('"');
WHILE s # NIL DO Out.Char(s.value); s := s.next END;
Out.Char('"')
END Show;
(* Main Procedure: *)
PROCEDURE Use*;
VAR a: Asc; b: Bad; d: Desc; s: List;
BEGIN
s := Explode("A quick brown fox jumps over the lazy dog");
Out.String("Before:"); Out.Ln; Show(s); Out.Ln;
s := a.Sort(s)(List); (* Ascending stable sort *)
Out.String("After Asc:"); Out.Ln; Show(s); Out.Ln;
s := b.Sort(s)(List); (* Ascending unstable sort *)
Out.String("After Bad:"); Out.Ln; Show(s); Out.Ln;
s := d.Sort(s)(List); (* Descending stable sort *)
Out.String("After Desc:"); Out.Ln; Show(s); Out.Ln
END Use;
END RosettaMergeSortUse.
</syntaxhighlight>
Execute: ^Q RosettaMergeSortUse.Use
{{out}}
<pre>
Before:
"A quick brown fox jumps over the lazy dog"
After Asc:
" Aabcdeefghijklmnoooopqrrstuuvwxyz"
After Bad:
" aAbcdeefghijklmnoooopqrrstuuvwxyz"
After Desc:
"zyxwvuutsrrqpoooonmlkjihgfeedcbaA "
</pre>
=={{header|Crystal}}==
{{trans|Ruby}}
<syntaxhighlight lang="ruby">def merge_sort(a : Array(Int32)) : Array(Int32)
return a if a.size <= 1
m = a.size // 2
lt = merge_sort(a[0 ... m])
rt = merge_sort(a[m .. -1])
return merge(lt, rt)
end
def merge(lt : Array(Int32), rt : Array(Int32)) : Array(Int32)
result = Array(Int32).new
until lt.empty? || rt.empty?
result << (lt.first < rt.first ? lt.shift : rt.shift)
end
return result + lt + rt
end
a = [7, 6, 5, 9, 8, 4, 3, 1, 2, 0]
puts merge_sort(a) # => [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]</syntaxhighlight>
=={{header|Curry}}==
Copied from [http://www.informatik.uni-kiel.de/~curry/examples/ Curry: Example Programs]
<syntaxhighlight lang="curry">-- merge sort: sorting two lists by merging the sorted first
-- and second half of the list
sort :: ([a] -> [a] -> [a] -> Success) -> [a] -> [a] -> Success
sort merge xs ys =
if length xs < 2 then ys =:= xs
else sort merge (firsthalf xs) us
& sort merge (secondhalf xs) vs
& merge us vs ys
where us,vs free
intMerge :: [Int] -> [Int] -> [Int] -> Success
intMerge [] ys zs = zs =:= ys
intMerge (x:xs) [] zs = zs =:= x:xs
intMerge (x:xs) (y:ys) zs =
if (x > y) then intMerge (x:xs) ys us & zs =:= y:us
else intMerge xs (y:ys) vs & zs =:= x:vs
where us,vs free
firsthalf xs = take (length xs `div` 2) xs
secondhalf xs = drop (length xs `div` 2) xs
goal1 xs = sort intMerge [3,1,2] xs
goal2 xs = sort intMerge [3,1,2,5,4,8] xs
goal3 xs = sort intMerge [3,1,2,5,4,8,6,7,2,9,1,4,3] xs</syntaxhighlight>
=={{header|D}}==
Arrays only, not in-place.
<syntaxhighlight lang="d">import std.stdio, std.algorithm, std.array, std.range;
T[] mergeSorted(T)(in T[] D) /*pure nothrow @safe*/ {
if (D.length < 2)
return D.dup;
return [D[0 .. $ / 2].mergeSorted, D[$ / 2 .. $].mergeSorted]
.nWayUnion.array;
}
void main() {
[3, 4, 2, 5, 1, 6].mergeSorted.writeln;
}</syntaxhighlight>
===Alternative Version===
This in-place version allocates the auxiliary memory on the stack,
making life easier for the garbage collector,
but with risk of stack overflow (same output):
<syntaxhighlight lang="d">import std.stdio, std.algorithm, core.stdc.stdlib, std.exception,
void mergeSort(T)(T[] data) if (hasSwappableElements!(typeof(data))) {
T* ptr = cast(T*)alloca(L * T.sizeof);
enforce(ptr != null);
ptr[0 .. L] = data[];
mergeSort(ptr[L/2 .. L]);
[ptr[0 .. L/2], ptr[L/2 .. L]].nWayUnion().copy(data);
}
void main() {
a.mergeSort();
writeln(a);
}</syntaxhighlight>
<!-- Missing in-place version for arrays -->
<!-- Missing generic version for Ranges -->
=={{header|Dart}}==
<syntaxhighlight lang="dart">void main() {
MergeSortInDart sampleSort = MergeSortInDart();
List<int> theResultingList = sampleSort.sortTheList([54, 89, 125, 47899, 32, 61, 42, 895647, 215, 345, 6, 21, 2, 78]);
print('Here\'s the sorted list: ${theResultingList}');
}
/////////////////////////////////////
class MergeSortInDart {
List<int> sortedList;
// In Dart we often put helper functions at the bottom.
// You could put them anywhere, we just like it
// for organizational purposes. It's nice to be able to
// read them in the order they're
// Start here
List<int> sortTheList(List<int> sortThis){
// My parameters are listed vertically for readability. Dart
// doesn't care how you list them, vertically or horizontally.
sortedList = mSort(
sortThis,
sortThis.sublist(0, sortThis.length),
sortThis.length,
);
return sortThis;
}
mSort(
List<int> sortThisList,
List<int> tempList,
int thisListLength) {
if (thisListLength == 1) {
return;
}
// In Dart using ~/ is more efficient than using .floor()
int middle = (thisListLength ~/ 2);
// If you use something in a try/on/catch/finally block then
// be sure to declare it outside the block (for scope)
List<int> tempLeftList;
// This was used for troubleshooting. It was left here to show
// how a basic block try/on can be better than a debugPrint since
// it won't print unless there's a problem.
try {
tempLeftList = tempList.sublist(0, middle);
} on RangeError {
print(
'tempLeftList length = ${tempList.length}, thisListLength '
'was supposedly $thisListLength and Middle was $middle');
}
// If you see "myList.getRange(x,y)" that's a sign the code is
// from Dart 1 and needs to be updated. It's "myList.sublist" in Dart 2
List<int> tempRightList = tempList.sublist(middle);
// Left side.
mSort(
tempLeftList,
sortThisList.sublist(0, middle),
middle,
);
// Right side.
mSort(
tempRightList,
sortThisList.sublist(middle),
sortThisList.length - middle,
// Merge it.
tempLeftList,
sortThisList,
);
}
dartMerge(
List<int> leftSide,
List<int> rightSide,
List<int> sortThisList,
) {
int index = 0;
int elementValue;
// This should be human readable.
while (leftSide.isNotEmpty && rightSide.isNotEmpty) {
if (rightSide[0] < leftSide[0]) {
elementValue = rightSide[0];
rightSide.removeRange(0, 1);
} else {
elementValue = leftSide[0];
leftSide.removeRange(0, 1);
}
sortThisList[index++] = elementValue;
}
while (leftSide.isNotEmpty) {
elementValue = leftSide[0];
leftSide.removeRange(0, 1);
sortThisList[index++] = elementValue;
}
while (rightSide.isNotEmpty) {
elementValue = rightSide[0];
rightSide.removeRange(0, 1);
sortThisList[index++] = elementValue;
}
sortedList = sortThisList;
}
}</syntaxhighlight>
=={{header|Delphi}}==
See [https://rosettacode.org/wiki/Sorting_algorithms/Merge_sort#Pascal Pascal].
=={{header|E}}==
<syntaxhighlight lang="e">def merge(var xs :List, var ys :List) {
var result := []
while (xs =~ [x] + xr && ys =~ [y] + yr) {
Line 704 ⟶ 3,299:
return merge(sort(list.run(0, split)),
sort(list.run(split)))
}</
=={{header|EasyLang}}==
<syntaxhighlight lang="text">
proc sort . d[] .
len tmp[] len d[]
sz = 1
while sz < len d[]
swap tmp[] d[]
left = 1
while left < len d[]
# merge
mid = left + sz - 1
if mid > len d[]
mid = len d[]
.
right = mid + sz
if right > len d[]
right = len d[]
.
l = left
r = mid + 1
for i = left to right
if r > right or l <= mid and tmp[l] < tmp[r]
d[i] = tmp[l]
l += 1
else
d[i] = tmp[r]
r += 1
.
.
left += 2 * sz
.
sz *= 2
.
.
data[] = [ 29 4 72 44 55 26 27 77 92 5 ]
sort data[]
print data[]
</syntaxhighlight>
=={{header|Eiffel}}==
<syntaxhighlight lang="eiffel">
class
MERGE_SORT [G -> COMPARABLE]
create
sort
feature
sort (ar: ARRAY [G])
-- Sorted array in ascending order.
require
ar_not_empty: not ar.is_empty
do
create sorted_array.make_empty
mergesort (ar, 1, ar.count)
sorted_array := ar
ensure
sorted_array_not_empty: not sorted_array.is_empty
sorted: is_sorted (sorted_array, 1, sorted_array.count)
end
sorted_array: ARRAY [G]
feature {NONE}
mergesort (ar: ARRAY [G]; l, r: INTEGER)
-- Sorting part of mergesort.
local
m: INTEGER
do
if l < r then
m := (l + r) // 2
mergesort (ar, l, m)
mergesort (ar, m + 1, r)
merge (ar, l, m, r)
end
end
merge (ar: ARRAY [G]; l, m, r: INTEGER)
-- Merge part of mergesort.
require
positive_index_l: l >= 1
positive_index_m: m >= 1
positive_index_r: r >= 1
ar_not_empty: not ar.is_empty
local
merged: ARRAY [G]
h, i, j, k: INTEGER
do
i := l
j := m + 1
k := l
create merged.make_filled (ar [1], 1, ar.count)
from
until
i > m or j > r
loop
if ar.item (i) <= ar.item (j) then
merged.force (ar.item (i), k)
i := i + 1
elseif ar.item (i) > ar.item (j) then
merged.force (ar.item (j), k)
j := j + 1
end
k := k + 1
end
if i > m then
from
h := j
until
h > r
loop
merged.force (ar.item (h), k + h - j)
h := h + 1
end
elseif j > m then
from
h := i
until
h > m
loop
merged.force (ar.item (h), k + h - i)
h := h + 1
end
end
from
h := l
until
h > r
loop
ar.item (h) := merged.item (h)
h := h + 1
end
ensure
is_partially_sorted: is_sorted (ar, l, r)
end
is_sorted (ar: ARRAY [G]; l, r: INTEGER): BOOLEAN
-- Is 'ar' sorted in ascending order?
require
ar_not_empty: not ar.is_empty
l_in_range: l >= 1
r_in_range: r <= ar.count
local
i: INTEGER
do
Result := True
from
i := l
until
i = r
loop
if ar [i] > ar [i + 1] then
Result := False
end
i := i + 1
end
end
end
</syntaxhighlight>
Test:
<syntaxhighlight lang="eiffel">
class
APPLICATION
create
make
feature
make
do
test := <<2, 5, 66, -2, 0, 7>>
io.put_string ("unsorted" + "%N")
across
test as ar
loop
io.put_string (ar.item.out + "%T")
end
io.put_string ("%N" + "sorted" + "%N")
create merge.sort (test)
across
merge.sorted_array as ar
loop
io.put_string (ar.item.out + "%T")
end
end
test: ARRAY [INTEGER]
merge: MERGE_SORT [INTEGER]
end
</syntaxhighlight>
{{out}}
<pre>
unsorted
2 5 66 -2 0 7
sorted
-2 0 2 5 7 66
</pre>
=={{header|Elixir}}==
<syntaxhighlight lang="elixir">defmodule Sort do
def merge_sort(list) when length(list) <= 1, do: list
def merge_sort(list) do
{left, right} = Enum.split(list, div(length(list), 2))
:lists.merge( merge_sort(left), merge_sort(right))
end
end</syntaxhighlight>
Example:
<pre>
iex(10)> Sort.merge_sort([5,3,9,4,1,6,8,2,7])
[1, 2, 3, 4, 5, 6, 7, 8, 9]
</pre>
=={{header|Erlang}}==
Line 710 ⟶ 3,524:
Single-threaded version:
<
mergeSort(L) when length(L) > 1 ->
{L1, L2} = lists:split(length(L) div 2, L),
lists:merge(mergeSort(L1), mergeSort(L2)).</
Multi-process version:
<
pMergeSort(L) when length(L) > 1 ->
{L1, L2} = lists:split(length(L) div 2, L),
Line 728 ⟶ 3,542:
spawn(mergesort, pMergeSort2, [L1, self()]),
spawn(mergesort, pMergeSort2, [L2, self()]),
Parent ! mergeResults([]).</
another multi-process version (number of processes == number of processor cores):
<syntaxhighlight lang="erlang">
merge_sort(List) -> m(List, erlang:system_info(schedulers)).
m([L],_) -> [L];
m(L, N) when N > 1 ->
{L1,L2} = lists:split(length(L) div 2, L),
{Parent, Ref} = {self(), make_ref()},
spawn(fun()-> Parent ! {l1, Ref, m(L1, N-2)} end),
spawn(fun()-> Parent ! {l2, Ref, m(L2, N-2)} end),
{L1R, L2R} = receive_results(Ref, undefined, undefined),
lists:merge(L1R, L2R);
m(L, _) -> {L1,L2} = lists:split(length(L) div 2, L), lists:merge(m(L1, 0), m(L2, 0)).
receive_results(Ref, L1, L2) ->
receive
{l1, Ref, L1R} when L2 == undefined -> receive_results(Ref, L1R, L2);
{l2, Ref, L2R} when L1 == undefined -> receive_results(Ref, L1, L2R);
{l1, Ref, L1R} -> {L1R, L2};
{l2, Ref, L2R} -> {L1, L2R}
after 5000 -> receive_results(Ref, L1, L2)
end.
</syntaxhighlight>
=={{header|ERRE}}==
<syntaxhighlight lang="erre">
PROGRAM MERGESORT_DEMO
! Example of merge sort usage.
CONST SIZE%=100,S1%=50
DIM DTA%[SIZE%],FH%[S1%],STACK%[20,2]
PROCEDURE MERGE(START%,MIDDLE%,ENDS%)
LOCAL FHSIZE%
FHSIZE%=MIDDLE%-START%+1
FOR I%=0 TO FHSIZE%-1 DO
FH%[I%]=DTA%[START%+I%]
END FOR
I%=0
J%=MIDDLE%+1
K%=START%
REPEAT
IF FH%[I%]<=DTA%[J%] THEN
DTA%[K%]=FH%[I%]
I%=I%+1
K%=K%+1
ELSE
DTA%[K%]=DTA%[J%]
J%=J%+1
K%=K%+1
END IF
UNTIL I%=FHSIZE% OR J%>ENDS%
WHILE I%<FHSIZE% DO
DTA%[K%]=FH%[I%]
I%=I%+1
K%=K%+1
END WHILE
END PROCEDURE
PROCEDURE MERGE_SORT(LEV->LEV)
! *****************************************************************
! This procedure Merge Sorts the chunk of DTA% bounded by
! Start% & Ends%.
! *****************************************************************
LOCAL MIDDLE%
IF ENDS%=START% THEN LEV=LEV-1 EXIT PROCEDURE END IF
IF ENDS%-START%=1 THEN
IF DTA%[ENDS%]<DTA%[START%] THEN
SWAP(DTA%[START%],DTA%[ENDS%])
END IF
LEV=LEV-1
EXIT PROCEDURE
END IF
MIDDLE%=START%+(ENDS%-START%)/2
STACK%[LEV,0]=START% STACK%[LEV,1]=ENDS% STACK%[LEV,2]=MIDDLE%
START%=START% ENDS%=MIDDLE%
MERGE_SORT(LEV+1->LEV)
START%=STACK%[LEV,0] ENDS%=STACK%[LEV,1] MIDDLE%=STACK%[LEV,2]
STACK%[LEV,0]=START% STACK%[LEV,1]=ENDS% STACK%[LEV,2]=MIDDLE%
START%=MIDDLE%+1 ENDS%=ENDS%
MERGE_SORT(LEV+1->LEV)
START%=STACK%[LEV,0] ENDS%=STACK%[LEV,1] MIDDLE%=STACK%[LEV,2]
MERGE(START%,MIDDLE%,ENDS%)
LEV=LEV-1
END PROCEDURE
BEGIN
FOR I%=1 TO SIZE% DO
DTA%[I%]=RND(1)*10000
END FOR
START%=1 ENDS%=SIZE%
MERGE_SORT(0->LEV)
FOR I%=1 TO SIZE% DO
WRITE("#####";DTA%[I%];)
END FOR
PRINT
END PROGRAM
</syntaxhighlight>
=={{header|Euphoria}}==
<syntaxhighlight lang="euphoria">function merge(sequence left, sequence right)
sequence result
result = {}
while length(left) > 0 and length(right) > 0 do
if compare(left[1], right[1]) <= 0 then
result = append(result, left[1])
left = left[2..$]
else
result = append(result, right[1])
right = right[2..$]
end if
end while
return result & left & right
end function
function mergesort(sequence m)
sequence left, right
integer middle
if length(m) <= 1 then
return m
else
middle = floor(length(m)/2)
left = mergesort(m[1..middle])
right = mergesort(m[middle+1..$])
if compare(left[$], right[1]) <= 0 then
return left & right
elsif compare(right[$], left[1]) <= 0 then
return right & left
else
return merge(left, right)
end if
end if
end function
constant s = rand(repeat(1000,10))
? s
? mergesort(s)</syntaxhighlight>
{{out}}
<pre>{385,599,284,650,457,804,724,300,434,722}
{284,300,385,434,457,599,650,722,724,804}
</pre>
=={{header|F Sharp|F#}}==
<syntaxhighlight lang="fsharp">let split list =
let rec aux l acc1 acc2 =
match l with
| [] -> (acc1,acc2)
| [x] -> (x::acc1,acc2)
| x::y::tail ->
aux tail (x::acc1) (y::acc2)
in aux list [] []
let rec merge l1 l2 =
match (l1,l2) with
| (x,[]) -> x
| ([],y) -> y
| (x::tx,y::ty) ->
if x <= y then x::merge tx l2
else y::merge l1 ty
let rec mergesort list =
match list with
| [] -> []
| [x] -> [x]
| _ -> let (l1,l2) = split list
in merge (mergesort l1) (mergesort l2)</syntaxhighlight>
=={{header|Factor}}==
<syntaxhighlight lang="factor">: mergestep ( accum seq1 seq2 -- accum seq1 seq2 )
2dup [ first ] bi@ <
[ [ [ first ] [ rest-slice ] bi [ suffix ] dip ] dip ]
[ [ first ] [ rest-slice ] bi [ swap [ suffix ] dip ] dip ]
if ;
: merge ( seq1 seq2 -- merged )
[ { } ] 2dip
[ 2dup [ length 0 > ] bi@ and ]
[ mergestep ] while
append append ;
: mergesort ( seq -- sorted )
dup length 1 >
[ dup length 2 / floor [ head ] [ tail ] 2bi [ mergesort ] bi@ merge ]
[ ] if ;</syntaxhighlight>
<syntaxhighlight lang="factor">( scratchpad ) { 4 2 6 5 7 1 3 } mergesort .
{ 1 2 3 4 5 6 7 }</syntaxhighlight>
=={{header|Forth}}==
This is an in-place mergesort which works on arrays of integers.
<
over @ over @ < if
over @ >r
Line 754 ⟶ 3,777:
: .array ( addr len -- ) 0 do dup i cells + @ . loop drop ;
test 10 2dup sort .array \ 0 1 2 3 4 5 6 7 8 9</
=={{header|Fortran}}==
{{works with|Fortran|
<syntaxhighlight lang="fortran"> program TestMergeSort
implicit none
integer, parameter :: N = 8
integer :: A(N) = (/ 1, 5, 2, 7, 3, 9, 4, 6 /)
integer :: work((size(A) + 1) / 2)
write(*,'(A,/,10I3)')'Unsorted array :',A
call MergeSort(A, work)
write(*,'(A,/,10I3)')'Sorted array :',A
contains
implicit none
! The targe attribute is necessary, because A .or. B might overlap with C.
integer, target, intent(in) :: A(:), B(:)
integer, target, intent(inout) :: C(:)
integer :: i, j, k
if (size(A) + size(B) > size(C)) stop(1)
i = 1; j = 1
do k = 1, size(C)
if (i <= size(A) .and. j <= size(B)) then
if (A(i) <= B(j)) then
C(k) = A(i)
i = i + 1
else
C(k) = B(j)
j = j + 1
end if
else if (i <= size(A)) then
C(k) = A(i)
i = i + 1
else if (j <= size(B)) then
C(k) = B(j)
j = j + 1
end if
end do
end subroutine merge
subroutine swap(x, y)
implicit none
integer
integer :: tmp
tmp = x; x = y; y = tmp
end subroutine
implicit none
integer, intent(inout) :: A(:)
integer, intent(inout) :: work(:)
integer :: half
half = (size(A) + 1) / 2
if (size(A) < 2) then
continue
else if (size(A) == 2) then
if (A(1) > A(2)) then
call swap(A(1), A(2))
end if
else
call MergeSort(A( : half), work)
call MergeSort(A(half + 1 :), work)
if (A(half) > A(half + 1)) then
work(1 : half) = A(1 : half)
call merge(work(1 : half), A(half + 1:), A)
endif
end if
end subroutine MergeSort
end program TestMergeSort
</syntaxhighlight>
=={{header|FreeBASIC}}==
Uses 'top down' C-like algorithm in Wikipedia article:
<syntaxhighlight lang="freebasic">' FB 1.05.0 Win64
Sub copyArray(a() As Integer, iBegin As Integer, iEnd As Integer, b() As Integer)
Redim b(iBegin To iEnd - 1) As Integer
For k As Integer = iBegin To iEnd - 1
Next
End Sub
' Left source half is a(iBegin To iMiddle-1).
' Right source half is a(iMiddle To iEnd-1).
' Result is b(iBegin To iEnd-1).
Sub topDownMerge(a() As Integer, iBegin As Integer, iMiddle As Integer, iEnd As Integer, b() As Integer)
Dim i As Integer = iBegin
Dim j As Integer = iMiddle
' While there are elements in the left or right runs...
For k As Integer = iBegin To iEnd - 1
' If left run head exists and is <= existing right run head.
If i < iMiddle AndAlso (j >= iEnd OrElse a(i) <= a(j)) Then
b(k) = a(i)
i += 1
Else
b(k) = a(j)
j += 1
End If
Next
End Sub
' Sort the given run of array a() using array b() as a source.
' iBegin is inclusive; iEnd is exclusive (a(iEnd) is not in the set).
Sub topDownSplitMerge(b() As Integer, iBegin As Integer, iEnd As Integer, a() As Integer)
If (iEnd - iBegin) < 2 Then Return '' If run size = 1, consider it sorted
' split the run longer than 1 item into halves
Dim iMiddle As Integer = (iEnd + iBegin) \ 2 '' iMiddle = mid point
' recursively sort both runs from array a() into b()
topDownSplitMerge(a(), iBegin, iMiddle, b()) '' sort the left run
topDownSplitMerge(a(), iMiddle, iEnd, b()) '' sort the right run
' merge the resulting runs from array b() into a()
topDownMerge(b(), iBegin, iMiddle, iEnd, a())
End Sub
' Array a() has the items to sort; array b() is a work array (empty initially).
Sub topDownMergeSort(a() As Integer, b() As Integer, n As Integer)
copyArray(a(), 0, n, b()) '' duplicate array a() into b()
topDownSplitMerge(b(), 0, n, a()) '' sort data from b() into a()
End Sub
Sub printArray(a() As Integer)
For i As Integer = LBound(a) To UBound(a)
Print Using "####"; a(i);
Next
Print
End Sub
Dim a(0 To 9) As Integer = {4, 65, 2, -31, 0, 99, 2, 83, 782, 1}
Dim b() As Integer
Print "Unsorted : ";
printArray(a())
topDownMergeSort a(), b(), 10
Print "Sorted : ";
printArray(a())
Print
Dim a2(0 To 8) As Integer = {7, 5, 2, 6, 1, 4, 2, 6, 3}
Erase b
Print "Unsorted : ";
printArray(a2())
topDownMergeSort a2(), b(), 9
Print "Sorted : ";
printArray(a2())
Print
Print "Press any key to quit"
Sleep</syntaxhighlight>
{{out}}
<pre>
Unsorted : 4 65 2 -31 0 99 2 83 782 1
Sorted : -31 0 1 2 2 4 65 83 99 782
Unsorted : 7 5 2 6 1 4 2 6 3
Sorted : 1 2 2 3 4 5 6 6 7
</pre>
=={{header|FunL}}==
<syntaxhighlight lang="funl">def
sort( [] ) = []
sort( [x] ) = [x]
sort( xs ) =
val (l, r) = xs.splitAt( xs.length()\2 )
merge( sort(l), sort(r) )
merge( [], xs ) = xs
merge( xs, [] ) = xs
merge( x:xs, y:ys )
| x <= y = x : merge( xs, y:ys )
| otherwise = y : merge( x:xs, ys )
println( sort([94, 37, 16, 56, 72, 48, 17, 27, 58, 67]) )
println( sort(['Sofía', 'Alysha', 'Sophia', 'Maya', 'Emma', 'Olivia', 'Emily']) )</syntaxhighlight>
{{out}}
<pre>
[16, 17, 27, 37, 48, 56, 58, 67, 72, 94]
[Alysha, Emily, Emma, Maya, Olivia, Sofía, Sophia]
</pre>
=={{header|Go}}==
<syntaxhighlight lang="go">package main
import "fmt"
var a = []int{170, 45, 75, -90, -802, 24, 2, 66}
var s = make([]int, len(a)/2+1) // scratch space for merge step
func main() {
fmt.Println("before:", a)
mergeSort(a)
fmt.Println("after: ", a)
}
func mergeSort(a []int) {
if len(a) < 2 {
return
}
mid := len(a) / 2
mergeSort(a[:mid])
mergeSort(a[mid:])
if a[mid-1] <= a[mid] {
return
}
// merge step, with the copy-half optimization
copy(s, a[:mid])
l, r := 0, mid
for i := 0; ; i++ {
if s[l] <= a[r] {
a[i] = s[l]
l++
if l == mid {
break
}
} else {
a[i] = a[r]
r++
if r == len(a) {
copy(a[i+1:], s[l:mid])
break
}
}
}
return
}</syntaxhighlight>
=={{header|Groovy}}==
This is the standard algorithm, except that in the looping phase of the merge we work backwards through the left and right lists to construct the merged list, to take advantage of the [[Groovy]] ''List.pop()'' method. However, this results in a partially merged list in reverse sort order; so we then reverse it to put in back into correct order. This could play havoc with the sort stability, but we compensate by picking aggressively from the right list (ties go to the right), rather than aggressively from the left as is done in the standard algorithm.
<syntaxhighlight lang="groovy">def merge = { List left, List right ->
List mergeList = []
while (left && right) {
print "."
mergeList << ((left[-1] > right[-1]) ? left.pop() : right.pop())
}
mergeList = mergeList.reverse()
mergeList = left + right + mergeList
}
def mergeSort;
mergeSort = { List list ->
def n = list.size()
if (n < 2) return list
def middle = n.intdiv(2)
def left = [] + list[0..<middle]
def right = [] + list[middle..<n]
left = mergeSort(left)
right = mergeSort(right)
if (left[-1] <= right[0]) return left + right
merge(left, right)
}</syntaxhighlight>
Test:
<syntaxhighlight lang="groovy">println (mergeSort([23,76,99,58,97,57,35,89,51,38,95,92,24,46,31,24,14,12,57,78,4]))
println (mergeSort([88,18,31,44,4,0,8,81,14,78,20,76,84,33,73,75,82,5,62,70,12,7,1]))
println ()
println (mergeSort([10, 10.0, 10.00, 1]))
println (mergeSort([10, 10.00, 10.0, 1]))
println (mergeSort([10.0, 10, 10.00, 1]))
println (mergeSort([10.0, 10.00, 10, 1]))
println (mergeSort([10.00, 10, 10.0, 1]))
println (mergeSort([10.00, 10.0, 10, 1]))</syntaxhighlight>
The presence of decimal and integer versions of the same numbers, demonstrates, but of course does not '''prove''', that the sort remains stable.
{{out}}
<pre>.............................................................[4, 12, 14, 23, 24, 24, 31, 35, 38, 46, 51, 57, 57, 58, 76, 78, 89, 92, 95, 97, 99]
....................................................................[0, 1, 4, 5, 7, 8, 12, 14, 18, 20, 31, 33, 44, 62, 70, 73, 75, 76, 78, 81, 82, 84, 88]
....[1, 10, 10.0, 10.00]
....[1, 10, 10.00, 10.0]
....[1, 10.0, 10, 10.00]
....[1, 10.0, 10.00, 10]
....[1, 10.00, 10, 10.0]
....[1, 10.00, 10.0, 10]</pre>
===Tail recursion version===
It is possible to write a version based on tail recursion, similar to that written in Haskell, OCaml or F#.
This version also takes into account stack overflow problems induced by recursion for large lists using closure trampolines:
<syntaxhighlight lang="groovy">split = { list ->
list.collate((list.size()+1)/2 as int)
}
merge = { left, right, headBuffer=[] ->
if(left.size() == 0) headBuffer+right
else if(right.size() == 0) headBuffer+left
else if(left.head() <= right.head()) merge.trampoline(left.tail(), right, headBuffer+left.head())
else merge.trampoline(right.tail(), left, headBuffer+right.head())
}.trampoline()
mergesort = { List list ->
if(list.size() < 2) list
else merge(split(list).collect {mergesort it})
}
assert mergesort((500..1)) == (1..500)
assert mergesort([5,4,6,3,1,2]) == [1,2,3,4,5,6]
assert mergesort([3,3,1,4,6,78,9,1,3,5]) == [1,1,3,3,3,4,5,6,9,78]
</syntaxhighlight>
which uses <code>List.collate()</code>, alternatively one could write a purely recursive <code>split()</code> closure as:
<syntaxhighlight lang="groovy">
split = { list, left=[], right=[] ->
if(list.size() <2) [list+left, right]
else split.trampoline(list.tail().tail(), [list.head()]+left,[list.tail().head()]+right)
}.trampoline()
</syntaxhighlight>
=={{header|Haskell}}==
Splitting in half in the middle like the normal merge sort does would be inefficient on the singly-linked lists used in Haskell (since you would have to do one pass just to determine the length, and then another half-pass to do the splitting). Instead, the algorithm here splits the list in half in a different way -- by alternately assigning elements to one list and the other. That way we (lazily) construct both sublists in parallel as we traverse the original list. Unfortunately, under this way of splitting we cannot do a stable sort.
<
merge xs []
merge xs@(x:
split (x:y:zs) = let (xs,ys) = split zs in (x:xs,y:ys)
Line 843 ⟶ 4,103:
mergeSort [x] = [x]
mergeSort xs = let (as,bs) = split xs
in merge (mergeSort as) (mergeSort bs)</
Alternatively, we can use bottom-up mergesort. This starts with lots of tiny sorted lists, and repeatedly merges pairs of them, building a larger and larger sorted list
<syntaxhighlight lang="haskell">mergePairs (sorted1 : sorted2 : sorteds) = merge sorted1 sorted2 : mergePairs sorteds
mergePairs sorteds = sorteds
mergeSortBottomUp list = mergeAll (map (\x -> [x]) list)
mergeAll [sorted] = sorted
mergeAll sorteds = mergeAll (mergePairs sorteds)</syntaxhighlight>
The standard library's sort function in GHC takes a similar approach to the bottom-up code, the differece being that, instead of starting with lists of size one, which are sorted by default, it detects runs in original list and uses those:
<syntaxhighlight lang="haskell">sort = sortBy compare
sortBy cmp = mergeAll . sequences
where
sequences (a:b:xs)
| a `cmp` b == GT = descending b [a] xs
| otherwise = ascending b (a:) xs
sequences xs = [xs]
descending a as (b:bs)
| a `cmp` b == GT = descending b (a:as) bs
descending a as bs = (a:as): sequences bs
ascending a as (b:bs)
| a `cmp` b /= GT = ascending b (\ys -> as (a:ys)) bs
ascending a as bs = as [a]: sequences bs</syntaxhighlight>
In this code, mergeAll, mergePairs, and merge are as above, except using the specialized cmp function in merge.
=={{header|Icon}} and {{header|Unicon}}==
<syntaxhighlight lang="icon">procedure main() #: demonstrate various ways to sort a list and string
demosort(mergesort,[3, 14, 1, 5, 9, 2, 6, 3],"qwerty")
end
procedure mergesort(X,op,lower,upper) #: return sorted list ascending(or descending)
local middle
if /lower := 1 then { # top level call setup
upper := *X
op := sortop(op,X) # select how and what we sort
}
if upper ~= lower then { # sort all sections with 2 or more elements
X := mergesort(X,op,lower,middle := lower + (upper - lower) / 2)
X := mergesort(X,op,middle+1,upper)
if op(X[middle+1],X[middle]) then # @middle+1 < @middle merge if halves reversed
X := merge(X,op,lower,middle,upper)
}
return X
end
procedure merge(X,op,lower,middle,upper) # merge two list sections within a larger list
local p1,p2,add
p1 := lower
p2 := middle + 1
add := if type(X) ~== "string" then put else "||" # extend X, strings require X := add (until ||:= is invocable)
while p1 <= middle & p2 <= upper do
if op(X[p1],X[p2]) then { # @p1 < @p2
X := add(X,X[p1]) # extend X temporarily (rather than use a separate temporary list)
p1 +:= 1
}
else {
X := add(X,X[p2]) # extend X temporarily
p2 +:= 1
}
while X := add(X,X[middle >= p1]) do p1 +:= 1 # and rest of lower or ...
while X := add(X,X[upper >= p2]) do p2 +:= 1 # ... upper trailers if any
if type(X) ~== "string" then # pull section's sorted elements from extension
every X[upper to lower by -1] := pull(X)
else
(X[lower+:(upper-lower+1)] := X[0-:(upper-lower+1)])[0-:(upper-lower+1)] := ""
return X
end</syntaxhighlight>
Note: This example relies on [[Sorting_algorithms/Bubble_sort#Icon| the supporting procedures 'sortop', and 'demosort' in Bubble Sort]].
The full demosort exercises the named sort of a list with op = "numeric", "string", ">>" (lexically gt, descending),">" (numerically gt, descending), a custom comparator, and also a string.
{{out}} Abbreviated sample
<pre>Sorting Demo using procedure mergesort
on list : [ 3 14 1 5 9 2 6 3 ]
with op = &null: [ 1 2 3 3 5 6 9 14 ] (0 ms)
...
on string : "qwerty"
with op = &null: "eqrtwy" (0 ms)</pre>
=={{header|Io}}==
<syntaxhighlight lang="io">List do (
merge := method(lst1, lst2,
result := list()
while(lst1 isNotEmpty or lst2 isNotEmpty,
if(lst1 first <= lst2 first) then(
result append(lst1 removeFirst)
) else (
result append(lst2 removeFirst)
)
)
result)
mergeSort := method(
if (size > 1) then(
half_size := (size / 2) ceil
return merge(slice(0, half_size) mergeSort,
slice(half_size, size) mergeSort)
) else (return self)
)
mergeSortInPlace := method(
copy(mergeSort)
)
)
lst := list(9, 5, 3, -1, 15, -2)
lst mergeSort println # ==> list(-2, -1, 3, 5, 9, 15)
lst mergeSortInPlace println # ==> list(-2, -1, 3, 5, 9, 15)</syntaxhighlight>
=={{header|Isabelle}}==
<syntaxhighlight lang="isabelle">theory Mergesort
imports Main
begin
fun merge :: "int list ⇒ int list ⇒ int list" where
"merge [] ys = ys"
| "merge xs [] = xs"
| "merge (x#xs) (y#ys) = (if x ≤ y
then x # merge xs (y#ys)
else y # merge (x # xs) ys)"
text‹example:›
lemma "merge [1,3,6] [1,2,5,8] = [1,1,2,3,5,6,8]" by simp
lemma merge_set: "set (merge xs ys) = set xs ∪ set ys"
by(induction xs ys rule: merge.induct) auto
lemma merge_sorted:
"sorted xs ⟹ sorted ys ⟹ sorted (merge xs ys)"
proof(induction xs ys rule: merge.induct)
case (1 ys)
then show "sorted (merge [] ys)" by simp
next
case (2 x xs)
then show "sorted (merge (x # xs) [])" by simp
next
case (3 x xs y ys)
assume premx: "sorted (x # xs)"
and premy: "sorted (y # ys)"
and IHx: "x ≤ y ⟹ sorted xs ⟹ sorted (y # ys) ⟹
sorted (merge xs (y # ys))"
and IHy: "¬ x ≤ y ⟹ sorted (x # xs) ⟹ sorted ys ⟹
sorted (merge (x # xs) ys)"
then show "sorted (merge (x # xs) (y # ys))"
proof(cases "x ≤ y")
case True
with premx IHx premy have IH: "sorted (merge xs (y # ys))" by simp
from ‹x ≤ y› premx premy merge_set have
"∀z ∈ set (merge xs (y # ys)). x ≤ z" by fastforce
with ‹x ≤ y› IH show "sorted (merge (x # xs) (y # ys))" by(simp)
next
case False
with premy IHy premx have IH: "sorted (merge (x # xs) ys)" by simp
from ‹¬x ≤ y› premx premy merge_set have
"∀z ∈ set (merge (x # xs) ys). y ≤ z" by fastforce
with ‹¬x ≤ y› IH show "sorted (merge (x # xs) (y # ys))" by(simp)
qed
qed
fun mergesort :: "int list ⇒ int list" where
"mergesort [] = []"
| "mergesort [x] = [x]"
| "mergesort xs = merge (mergesort (take (length xs div 2) xs))
(mergesort (drop (length xs div 2) xs))"
theorem mergesort_set: "set xs = set (mergesort xs)"
proof(induction xs rule: mergesort.induct)
case 1
show "set [] = set (mergesort [])" by simp
next
case (2 x)
show "set [x] = set (mergesort [x])" by simp
next
case (3 x1 x2 xs)
from 3 have IH_simplified_take:
"set (mergesort (x1 # take (length xs div 2) (x2 # xs))) =
insert x1 (set (take (length xs div 2) (x2 # xs)))"
and IH_simplified_drop:
"set (mergesort (drop (length xs div 2) (x2 # xs))) =
set (drop (length xs div 2) (x2 # xs))" by simp+
have "(set (take n as) ∪ set (drop n as)) = set as"
for n and as::"int list"
proof -
from set_append[of "take n as" "drop n as"] have
"(set (take n as) ∪ set (drop n as)) =
set (take n as @ drop n as)" by simp
moreover have
"set (take n as @ drop n as) =
set as" using append_take_drop_id by simp
ultimately show ?thesis by simp
qed
hence "(set (take (length xs div 2) (x2 # xs)) ∪
set (drop (length xs div 2) (x2 # xs))) =
set (x2 # xs)"by(simp)
with IH_simplified_take IH_simplified_drop show
"set (x1 # x2 # xs) = set (mergesort (x1 # x2 # xs))"
by(simp add: merge_set)
qed
theorem mergesort_sorted: "sorted (mergesort xs)"
by(induction xs rule: mergesort.induct) (simp add: merge_sorted)+
text‹example:›
lemma "mergesort [42, 5, 1, 3, 67, 3, 9, 0, 33, 32] =
[0, 1, 3, 3, 5, 9, 32, 33, 42, 67]" by simp
end
</syntaxhighlight>
=={{header|J}}==
{{eff note|J|/:~}}
'''Recursive Solution'''
<syntaxhighlight lang="j">mergesort=: {{
if. 2>#y do. y return.end.
middle=. <.-:#y
X=. mergesort middle{.y
Y=. mergesort middle}.y
X merge Y
}}
merge=: {{ r=. y#~ i=. j=. 0
while. (i<#x)*(j<#y) do. a=. i{x [b=. j{y
if. a<b do. r=. r,a [i=. i+1
else. r=. r,b [j=. j+1 end.
end.
if. i<#x do. r=. r, i}.x end.
if. j<#y do. r=. r, j}.y end.
}}</syntaxhighlight>
'''Non-Recursive Solution'''
(This uses the same merge):
<syntaxhighlight lang="j">mergesort=: {{ r=. y [ stride=. 1
while. stride < #r do. stride=. 2*mid=. stride
r=. ;(-stride) (mid&}. <@merge (mid<.#) {.])\ r
end.
}}</syntaxhighlight>
Example use:
<syntaxhighlight lang="j"> mergesort 18 2 8 1 5 14 9 19 11 13 16 0 3 10 17 15 12 4 7 6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19</syntaxhighlight>
But use J's /:~ if you really need this function.
<syntaxhighlight lang="j"> (/:~ -: mergesort) ?~?10000
1</syntaxhighlight>
'''Tacit Recursive Solution'''
<syntaxhighlight lang="j">case=. (0 = # x=. @:[) + 2 * (0 = # y=. @:])
merge=. ({.x , }.x $: ])`(({.y , }.y $: [))@.({.x > {.y)`]`[@.case
mergesort=. (<. o -: o # ($: o {. merge $: (o=. @:) }.) ]) ^:(1 < #)</syntaxhighlight>
Example use:
<syntaxhighlight lang="j"> mergesort 18 2 8 1 5 14 9 19 11 13 16 0 3 10 17 15 12 4 7 6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19</syntaxhighlight>
=={{header|Java}}==
{{works with|Java|1.5+}}
<syntaxhighlight lang
import java.util.ArrayList;
import java.util.Iterator;
public class Merge{
public static <E extends Comparable<? super E>> List<E> mergeSort(List<E> m){
if(m.size() <= 1) return m;
int middle = m.size() / 2;
right = mergeSort(right);
left = mergeSort(left);
List<E> result = merge(left, right);
return result;
}
public static <E extends Comparable<? super E>> List<E> merge(List<E> left, List<E> right){
List<E> result = new ArrayList<E>();
Iterator<E> it1 = left.iterator();
Iterator<E> it2 = right.iterator();
E x = it1.next();
E y = it2.next();
while (true){
//change the direction of this comparison to change the direction of the sort
if(x.compareTo(y) <= 0){
result.add(x);
if(it1.hasNext()){
x = it1.next();
}else{
result.add(y);
while(it2.hasNext()){
result.add(it2.next());
}
break;
}
}else{
result.add(y);
if(it2.hasNext()){
y = it2.next();
}else{
result.add(x);
while (it1.hasNext()){
result.add(it1.next());
}
break;
}
}
}
return result;
}
}</syntaxhighlight>
=={{header|JavaScript}}==
<syntaxhighlight lang
function mergeSort(v) {
if (
return v;
}
let m = Math.floor(v.length / 2);
let l = mergeSort(v.slice(0, m));
function merge(a, b) {
let i = 0, j = 0;
let n = a.length + b.length;
let c = [];
while (c.length < n) {
if (i < a.length && (j >= b.length || a[i] < b[j])) {
c.push(a[i++]);
} else {
c.push(b[j++]);
}
}
return c;
}
}
function mergeSortInPlace(v) {
if (v.length <= 1) {
return;
}
let m = Math.floor(v.length / 2);
let l = v.slice(0, m);
let r = v.slice(m);
mergeSortInPlace(l);
mergeSortInPlace(r);
merge(l, r, v);
// merge a + b -> c
function merge(a, b, c) {
let i = 0, j = 0;
for (let k = 0; k < c.length; k++) {
if (i < a.length && (j >= b.length || a[i] < b[j])) {
c[k] = a[i++];
} else {
c[k] = b[j++];
}
}
}
}
// even faster
function mergeSortInPlaceFast(v) {
sort(v, 0, v.length, v.slice());
function sort(v, lo, hi, t) {
let n = hi - lo;
if (n <= 1) {
return;
}
let mid = lo + Math.floor(n / 2);
sort(v, lo, mid, t);
sort(v, mid, hi, t);
for (let i = lo; i < hi; i++) {
t[i] = v[i];
}
let i = lo, j = mid;
for (let k = lo; k < hi; k++) {
if (i < mid && (j >= hi || t[i] < t[j])) {
v[k] = t[i++];
} else {
v[k] = t[j++];
}
}
}
}
</syntaxhighlight>
<syntaxhighlight lang="javascript">function merge(left, right, arr) {
var a = 0;
while (left.length && right.length) {
arr[a++] = (right[0] < left[0]) ? right.shift() : left.shift();
}
while (left.length) {
arr[a++] = left.shift();
}
while (right.length) {
arr[a++] = right.shift();
}
}
function mergeSort(arr) {
var len = arr.length;
if (len === 1) { return; }
var mid = Math.floor(len / 2),
left = arr.slice(0, mid),
right = arr.slice(mid);
mergeSort(left);
mergeSort(right);
merge(left, right, arr);
}
var arr = [1, 5, 2, 7, 3, 9, 4, 6, 8];
mergeSort(arr); // arr will now: 1, 2, 3, 4, 5, 6, 7, 8, 9
// here is improved faster version, also often faster than QuickSort!
function mergeSort2(a) {
if (a.length <= 1) return
const mid = Math.floor(a.length / 2), left = a.slice(0, mid), right = a.slice(mid)
mergeSort2(left)
mergeSort2(right)
let ia = 0, il = 0, ir = 0
while (il < left.length && ir < right.length)
a[ia++] = left[il] < right[ir] ? left[il++] : right[ir++]
while (il < left.length)
a[ia++] = left[il++]
while (ir < right.length)
a[ia++] = right[ir++]
}
</syntaxhighlight>
=={{header|jq}}==
The sort function defined here will sort any JSON array.
<syntaxhighlight lang="jq"># Input: [x,y] -- the two arrays to be merged
# If x and y are sorted as by "sort", then the result will also be sorted:
def merge:
def m: # state: [x, y, array] (array being the answer)
.[0] as $x
| .[1] as $y
| if 0 == ($x|length) then .[2] + $y
elif 0 == ($y|length) then .[2] + $x
else
(if $x[0] <= $y[0] then [$x[1:], $y, .[2] + [$x[0] ]]
else [$x, $y[1:], .[2] + [$y[0] ]]
end) | m
end;
[.[0], .[1], []] | m;
def merge_sort:
if length <= 1 then .
else
(length/2 |floor) as $len
| . as $in
| [ ($in[0:$len] | merge_sort), ($in[$len:] | merge_sort) ] | merge
end;</syntaxhighlight>
'''Example''':
<syntaxhighlight lang="jq">
( [1, 3, 8, 9, 0, 0, 8, 7, 1, 6],
[170, 45, 75, 90, 2, 24, 802, 66],
[170, 45, 75, 90, 2, 24, -802, -66] )
| (merge_sort == sort)</syntaxhighlight>
{{Out}}
true
true
true
=={{header|Julia}}==
<syntaxhighlight lang="julia">function mergesort(arr::Vector)
if length(arr) ≤ 1 return arr end
mid = length(arr) ÷ 2
lpart = mergesort(arr[1:mid])
rpart = mergesort(arr[mid+1:end])
rst = similar(arr)
i = ri = li = 1
@inbounds while li ≤ length(lpart) && ri ≤ length(rpart)
if lpart[li] ≤ rpart[ri]
rst[i] = lpart[li]
li += 1
else
rst[i] = rpart[ri]
ri += 1
end
i += 1
end
if li ≤ length(lpart)
copyto!(rst, i, lpart, li)
else
copyto!(rst, i, rpart, ri)
end
return rst
end
v = rand(-10:10, 10)
println("# unordered: $v\n -> ordered: ", mergesort(v))</syntaxhighlight>
{{out}}
<pre># unordered: [8, 6, 7, 1, -1, 0, -4, 7, -7, 0]
-> ordered: [-7, -4, -1, 0, 0, 1, 6, 7, 7, 8]</pre>
=={{header|Kotlin}}==
<syntaxhighlight lang="kotlin">fun mergeSort(list: List<Int>): List<Int> {
if (list.size <= 1) {
return list
}
val left = mutableListOf<Int>()
val right = mutableListOf<Int>()
val middle = list.size / 2
list.forEachIndexed { index, number ->
if (index < middle) {
left.add(number)
} else {
right.add(number)
}
}
fun merge(left: List<Int>, right: List<Int>): List<Int> = mutableListOf<Int>().apply {
var indexLeft = 0
var indexRight = 0
while (indexLeft < left.size && indexRight < right.size) {
if (left[indexLeft] <= right[indexRight]) {
add(left[indexLeft])
indexLeft++
} else {
add(right[indexRight])
indexRight++
}
}
while (indexLeft < left.size) {
add(left[indexLeft])
indexLeft++
}
while (indexRight < right.size) {
add(right[indexRight])
indexRight++
}
}
return merge(mergeSort(left), mergeSort(right))
}
fun main(args: Array<String>) {
val numbers = listOf(5, 2, 3, 17, 12, 1, 8, 3, 4, 9, 7)
println("Unsorted: $numbers")
println("Sorted: ${mergeSort(numbers)}")
}</syntaxhighlight>
{{out}}
<pre>Unsorted: [5, 2, 3, 17, 12, 1, 8, 3, 4, 9, 7]
Sorted: [1, 2, 3, 3, 4, 5, 7, 8, 9, 12, 17]</pre>
=={{header|Lambdatalk}}==
A close translation from Picolisp. In lambdatalk lists are implemented as dynamical arrays with list-like functions, cons is A.addfirst!, car is A.first, cdr is A.rest, nil is A.new and so on.
<syntaxhighlight lang="scheme">
{def alt
{lambda {:list}
{if {A.empty? :list}
then {A.new}
else {A.addfirst! {A.first :list}
{alt {A.rest {A.rest :list}}}} }}}
-> alt
{def merge
{lambda {:l1 :l2}
{if {A.empty? :l2}
then :l1
else {if {< {A.first :l1} {A.first :l2}}
then {A.addfirst! {A.first :l1} {merge :l2 {A.rest :l1}}}
else {A.addfirst! {A.first :l2} {merge :l1 {A.rest :l2}}} }}}}
-> merge
{def mergesort
{lambda {:list}
{if {A.empty? {A.rest :list}}
then :list
else {merge {mergesort {alt :list}}
{mergesort {alt {A.rest :list}}}} }}}
-> mergesort
{mergesort {A.new 8 1 5 3 9 0 2 7 6 4}}
-> [0,1,2,3,4,5,6,7,8,9]
</syntaxhighlight>
=={{header|Liberty BASIC}}==
<syntaxhighlight lang="lb"> itemCount = 20
dim A(itemCount)
dim tmp(itemCount) 'merge sort needs additionally same amount of storage
for i = 1 to itemCount
A(i) = int(rnd(1) * 100)
next i
print "Before Sort"
call printArray itemCount
call mergeSort 1,itemCount
print "After Sort"
call printArray itemCount
end
'------------------------------------------
sub mergeSort start, theEnd
if theEnd-start < 1 then exit sub
if theEnd-start = 1 then
if A(start)>A(theEnd) then
tmp=A(start)
A(start)=A(theEnd)
A(theEnd)=tmp
end if
exit sub
end if
middle = int((start+theEnd)/2)
call mergeSort start, middle
call mergeSort middle+1, theEnd
call merge start, middle, theEnd
end sub
sub merge start, middle, theEnd
i = start: j = middle+1: k = start
while i<=middle OR j<=theEnd
select case
case i<=middle AND j<=theEnd
if A(i)<=A(j) then
tmp(k)=A(i)
i=i+1
else
tmp(k)=A(j)
j=j+1
end if
k=k+1
case i<=middle
tmp(k)=A(i)
i=i+1
k=k+1
case else 'j<=theEnd
tmp(k)=A(j)
j=j+1
k=k+1
end select
wend
for i = start to theEnd
A(i)=tmp(i)
next
end sub
'===========================================
sub printArray itemCount
for i = 1 to itemCount
print using("###", A(i));
next i
print
end sub</syntaxhighlight>
=={{header|Logo}}==
{{works with|UCB Logo}}
<
if :size < 1 [output list :front :list]
output split :size-1 (lput first :list :front) (butfirst :list)
Line 912 ⟶ 4,802:
if empty? first :half [output :list]
output merge mergesort first :half mergesort last :half
end</
=={{header|Logtalk}}==
<syntaxhighlight lang="logtalk">msort([], []) :- !.
msort([X], [X]) :- !.
msort([X, Y| Xs], Ys) :-
split([X, Y| Xs], X1s, X2s),
msort(X1s, Y1s),
msort(X2s, Y2s),
merge(Y1s, Y2s, Ys).
split([], [], []).
split([X| Xs], [X| Ys], Zs) :-
split(Xs, Zs, Ys).
merge([X| Xs], [Y| Ys], [X| Zs]) :-
X @=< Y, !,
merge(Xs, [Y| Ys], Zs).
merge([X| Xs], [Y| Ys], [Y| Zs]) :-
X @> Y, !,
merge([X | Xs], Ys, Zs).
merge([], Xs, Xs) :- !.
merge(Xs, [], Xs).</syntaxhighlight>
=={{header|Lua}}==
<syntaxhighlight lang="lua">local function merge(left_container, left_container_begin, left_container_end, right_container, right_container_begin, right_container_end, result_container, result_container_begin, comparator)
while left_container_begin <= left_container_end do
if right_container_begin > right_container_end then
for i = left_container_begin, left_container_end do
result_container[result_container_begin] = left_container[i]
result_container_begin = result_container_begin + 1
end
return
end
if comparator(right_container[right_container_begin], left_container[left_container_begin]) then
result_container[result_container_begin] = right_container[right_container_begin]
right_container_begin = right_container_begin + 1
else
result_container[result_container_begin] = left_container[left_container_begin]
left_container_begin = left_container_begin + 1
end
result_container_begin = result_container_begin + 1
end
for i = right_container_begin, right_container_end do
result_container[result_container_begin] = right_container[i]
result_container_begin = result_container_begin + 1
end
end
local function mergesort_impl(container, container_begin, container_end, comparator)
local range_length = (container_end - container_begin) + 1
if range_length < 2 then return end
local copy = {}
local copy_len = 0
for it = container_begin, container_end do
copy_len = copy_len + 1
copy[copy_len] = container[it]
end
local middle = bit.rshift(range_length, 1) -- or math.floor(range_length / 2)
mergesort_impl(copy, 1, middle, comparator)
mergesort_impl(copy, middle + 1, copy_len, comparator)
merge(copy, 1, middle, copy, middle + 1, copy_len, container, container_begin, comparator)
end
local function mergesort_default_comparator(a, b)
return a < b
end
function table.mergesort(container, comparator)
if not comparator then
comparator = mergesort_default_comparator
end
mergesort_impl(container, 1, #container, comparator)
end</syntaxhighlight>
<syntaxhighlight lang="lua">function getLower(a,b)
local i,j=1,1
return function()
if not b[j] or a[i] and a[i]<b[j] then
i=i+1; return a[i-1]
else
j=j+1; return b[j-1]
end
end
end
function merge(a,b)
local res={}
for v in getLower(a,b) do res[#res+1]=v end
return res
end
function mergesort(list)
if #list<=1 then return list end
local s=math.floor(#list/2)
return merge(mergesort{unpack(list,1,s)}, mergesort{unpack(list,s+1)})
end</syntaxhighlight>
=={{header|Lucid}}==
[http://i.csc.uvic.ca/home/hei/lup/06.html]
<
where
p = false fby not p;
Line 932 ⟶ 4,925:
iseod(xx) then false else xx <= yy fi;
end;
end;</
=={{header|M2000 Interpreter}}==
<syntaxhighlight lang="m2000 interpreter">
module checkit {
\\ merge sort
group merge {
function sort(right as stack) {
if len(right)<=1 then =right : exit
left=.sort(stack up right, len(right) div 2 )
right=.sort(right)
\\ stackitem(right) is same as stackitem(right,1)
if stackitem(left, len(left))<=stackitem(right) then
\\ !left take items from left for merging
\\ so after this left and right became empty stacks
=stack:=!left, !right
exit
end if
=.merge(left, right)
}
function sortdown(right as stack) {
if len(right)<=1 then =right : exit
left=.sortdown(stack up right, len(right) div 2 )
right=.sortdown(right)
if stackitem(left, len(left))>stackitem(right) then
=stack:=!left, !right : exit
end if
=.mergedown(left, right)
}
\\ left and right are pointers to stack objects
\\ here we pass by value the pointer not the data
function merge(left as stack, right as stack) {
result=stack
while len(left) > 0 and len(right) > 0
if stackitem(left,1) <= stackitem(right) then
result=stack:=!result, !(stack up left, 1)
else
result=stack:=!result, !(stack up right, 1)
end if
end while
if len(right) > 0 then result=stack:= !result,!right
if len(left) > 0 then result=stack:= !result,!left
=result
}
function mergedown(left as stack, right as stack) {
result=stack
while len(left) > 0 and len(right) > 0
if stackitem(left,1) > stackitem(right) then
result=stack:=!result, !(stack up left, 1)
else
result=stack:=!result, !(stack up right, 1)
end if
end while
if len(right) > 0 then result=stack:= !result,!right
if len(left) > 0 then result=stack:= !result,!left
=result
}
}
k=stack:=7, 5, 2, 6, 1, 4, 2, 6, 3
print merge.sort(k)
print len(k)=0 ' we have to use merge.sort(stack(k)) to pass a copy of k
\\ input array (arr is a pointer to array)
arr=(10,8,9,7,5,6,2,3,0,1)
\\ stack(array pointer) return a stack with a copy of array items
\\ array(stack pointer) return an array, empty the stack
arr2=array(merge.sort(stack(arr)))
Print type$(arr2)
Dim a()
\\ a() is an array as a value, so we just copy arr2 to a()
a()=arr2
\\ to prove we add 1 to each element of arr2
arr2++
Print a() ' 0,1,2,3,4,5,6,7,8,9
Print arr2 ' 1,2,3,4,5,6,7,8,9,11
p=a() ' we get a pointer
\\ a() has a double pointer inside
\\ so a() get just the inner pointer
a()=array(merge.sortdown(stack(p)))
\\ so now p (which use the outer pointer)
\\ still points to a()
print p ' p point to a()
}
checkit
</syntaxhighlight>
=={{header|Maple}}==
<syntaxhighlight lang="text">merge := proc(arr, left, mid, right)
local i, j, k, n1, n2, L, R;
n1 := mid-left+1:
n2 := right-mid:
L := Array(1..n1):
R := Array(1..n2):
for i from 0 to n1-1 do
L(i+1) :=arr(left+i):
end do:
for j from 0 to n2-1 do
R(j+1) := arr(mid+j+1):
end do:
i := 1:
j := 1:
k := left:
while(i <= n1 and j <= n2) do
if (L[i] <= R[j]) then
arr[k] := L[i]:
i++:
else
arr[k] := R[j]:
j++:
end if:
k++:
end do:
while(i <= n1) do
arr[k] := L[i]:
i++:
k++:
end do:
while(j <= n2) do
arr[k] := R[j]:
j++:
k++:
end do:
end proc:
arr := Array([17,3,72,0,36,2,3,8,40,0]);
mergeSort(arr,1,numelems(arr)):
arr;</syntaxhighlight>
{{Out|Output}}
<pre>[0,0,2,3,3,8,17,36,40,72]</pre>
=={{header|Mathematica}} / {{header|Wolfram Language}}==
{{works with|Mathematica|7.0}}
<syntaxhighlight lang="mathematica">MergeSort[m_List] := Module[{middle},
If[Length[m] >= 2,
middle = Ceiling[Length[m]/2];
Apply[Merge,
Map[MergeSort, Partition[m, middle, middle, {1, 1}, {}]]],
m
]
]
Merge[left_List, right_List] := Module[
{leftIndex = 1, rightIndex = 1},
Table[
Which[
leftIndex > Length[left], right[[rightIndex++]],
rightIndex > Length[right], left[[leftIndex++]],
left[[leftIndex]] <= right[[rightIndex]], left[[leftIndex++]],
True, right[[rightIndex++]]],
{Length[left] + Length[right]}]
]</syntaxhighlight>
=={{header|MATLAB}}==
<syntaxhighlight lang="matlab">function list = mergeSort(list)
if numel(list) <= 1
return
else
middle = ceil(numel(list) / 2);
left = list(1:middle);
right = list(middle+1:end);
left = mergeSort(left);
right = mergeSort(right);
if left(end) <= right(1)
list = [left right];
return
end
%merge(left,right)
counter = 1;
while (numel(left) > 0) && (numel(right) > 0)
if(left(1) <= right(1))
list(counter) = left(1);
left(1) = [];
else
list(counter) = right(1);
right(1) = [];
end
counter = counter + 1;
end
if numel(left) > 0
list(counter:end) = left;
elseif numel(right) > 0
list(counter:end) = right;
end
%end merge
end %if
end %mergeSort</syntaxhighlight>
Sample Usage:
<syntaxhighlight lang="matlab">>> mergeSort([4 3 1 5 6 2])
ans =
1 2 3 4 5 6</syntaxhighlight>
=={{header|Maxima}}==
<syntaxhighlight lang="maxima">merge(a, b) := block(
[c: [ ], i: 1, j: 1, p: length(a), q: length(b)],
while i <= p and j <= q do (
if a[i] < b[j] then (
c: endcons(a[i], c),
i: i + 1
) else (
c: endcons(b[j], c),
j: j + 1
)
),
if i > p then append(c, rest(b, j - 1)) else append(c, rest(a, i - 1))
)$
mergesort(u) := block(
[n: length(u), k, a, b],
if n <= 1 then u else (
a: rest(u, k: quotient(n, 2)),
b: rest(u, k - n),
merge(mergesort(a), mergesort(b))
)
)$</syntaxhighlight>
=={{header|MAXScript}}==
<syntaxhighlight lang="maxscript">fn mergesort arr =
(
local left = #()
local right = #()
local result = #()
if arr.count < 2 then return arr
else
(
local mid = arr.count/2
for i = 1 to mid do
(
append left arr[i]
)
for i = (mid+1) to arr.count do
(
append right arr[i]
)
left = mergesort left
right = mergesort right
if left[left.count] <= right[1] do
(
join left right
return left
)
result = _merge left right
return result
)
)
fn _merge a b =
(
local result = #()
while a.count > 0 and b.count > 0 do
(
if a[1] <= b[1] then
(
append result a[1]
a = for i in 2 to a.count collect a[i]
)
else
(
append result b[1]
b = for i in 2 to b.count collect b[i]
)
)
if a.count > 0 do
(
join result a
)
if b.count > 0 do
(
join result b
)
return result
)</syntaxhighlight>
Output:
<syntaxhighlight lang="maxscript">
a = for i in 1 to 15 collect random -5 20
#(-3, 13, 2, -2, 13, 9, 17, 7, 16, 19, 0, 0, 20, 18, 1)
mergeSort a
#(-3, -2, 0, 0, 1, 2, 7, 9, 13, 13, 16, 17, 18, 19, 20)
</syntaxhighlight>
=={{header|Mercury}}==
This version of a sort will sort a list of any type for which there is an ordering predicate defined. Both a function form and a predicate form are defined here with the function implemented in terms of the predicate. Some of the ceremony has been elided.
<syntaxhighlight lang="mercury">
:- module merge_sort.
:- interface.
:- import_module list.
:- type split_error ---> split_error.
:- func merge_sort(list(T)) = list(T).
:- pred merge_sort(list(T)::in, list(T)::out) is det.
:- implementation.
:- import_module int, exception.
merge_sort(U) = S :- merge_sort(U, S).
merge_sort(U, S) :- merge_sort(list.length(U), U, S).
:- pred merge_sort(int::in, list(T)::in, list(T)::out) is det.
merge_sort(L, U, S) :-
( L > 1 ->
H = L // 2,
( split(H, U, F, B) ->
merge_sort(H, F, SF),
merge_sort(L - H, B, SB),
merge_sort.merge(SF, SB, S)
; throw(split_error) )
; S = U ).
:- pred split(int::in, list(T)::in, list(T)::out, list(T)::out) is semidet.
split(N, L, S, E) :-
( N = 0 -> S = [], E = L
; N > 0, L = [H | L1], S = [H | S1],
split(N - 1, L1, S1, E) ).
:- pred merge(list(T)::in, list(T)::in, list(T)::out) is det.
merge([], [], []).
merge([X|Xs], [], [X|Xs]).
merge([], [Y|Ys], [Y|Ys]).
merge([X|Xs], [Y|Ys], M) :-
( compare(>, X, Y) ->
merge_sort.merge([X|Xs], Ys, M0),
M = [Y|M0]
; merge_sort.merge(Xs, [Y|Ys], M0),
M = [X|M0] ).
</syntaxhighlight>
=={{header|Miranda}}==
<syntaxhighlight lang="miranda">main :: [sys_message]
main = [Stdout ("Before: " ++ show testlist ++ "\n"),
Stdout ("After: " ++ show (mergesort testlist) ++ "\n")]
where testlist = [4,65,2,-31,0,99,2,83,782,1]
mergesort :: [*]->[*]
mergesort [] = []
mergesort [x] = [x]
mergesort xs = merge (mergesort l) (mergesort r)
where (l, r) = split [] [] xs
split l r [] = (l,r)
split l r [x] = (x:l,r)
split l r (x:y:xs) = split (x:l) (y:r) xs
merge xs [] = xs
merge [] ys = ys
merge (x:xs) (y:ys) = x:y:merge xs ys, if x<y
= y:x:merge xs ys, if x>=y</syntaxhighlight>
{{out}}
<pre>Before: [4,65,2,-31,0,99,2,83,782,1]
After: [-31,0,1,2,2,83,4,99,65,782]</pre>
=={{header|Modula-2}}==
===Iterative===
{{works with|TopSpeed (JPI) Modula-2 under DOSBox-X}}
Divides the input into blocks of 2 entries, and sorts each block by swapping if necessary. Then merges blocks of 2 into blocks of 4, blocks of 4 into blocks of 8, and so on.
<syntaxhighlight lang="modula2">
DEFINITION MODULE MSIterat;
PROCEDURE IterativeMergeSort( VAR a : ARRAY OF INTEGER);
END MSIterat.
</syntaxhighlight>
<syntaxhighlight lang="modula2">
IMPLEMENTATION MODULE MSIterat;
IMPORT Storage;
PROCEDURE IterativeMergeSort( VAR a : ARRAY OF INTEGER);
VAR
n, bufLen, len, endBuf : CARDINAL;
k, nL, nR, b, h, i, j, startR, endR: CARDINAL;
temp : INTEGER; (* array element *)
pbuf : POINTER TO ARRAY CARDINAL OF INTEGER;
BEGIN
n := HIGH(a) + 1; (* length of array *)
IF (n < 2) THEN RETURN; END;
(* Sort blocks of length 2 by swapping elements if necessary.
Start at high end of array; ignore a[0] if n is odd.*)
k := n;
REPEAT
DEC(k, 2);
IF (a[k] > a[k + 1]) THEN
temp := a[k]; a[k] := a[k + 1]; a[k + 1] := temp;
END;
UNTIL (k < 2);
IF (n = 2) THEN RETURN; END;
(* Set up a buffer for temporary storage when merging. *)
(* TopSpeed Modula-2 doesn't seem to have dynamic arrays,
so we use a workaround *)
bufLen := n DIV 2;
Storage.ALLOCATE( pbuf, bufLen*SIZE(INTEGER));
nR := 2; (* length of right-hand block when merging *)
REPEAT
len := 2*nR; (* maximum length of a merged block in this iteration *)
k := n; (* start at the high end of the array *)
WHILE (k > nR) DO
IF (k >= len) THEN
nL := nR; DEC(k, len);
ELSE
nL := k - nR; k := 0; END;
(* Merging 2 adjacent blocks, already sorted.
k = start index of left block;
nL, nR = lengths of left and right blocks *)
startR := k + nL; endR := startR + nR;
(* Skip elements in left block that are already in correct place *)
temp := a[startR]; (* first (smallest) element in right block *)
j := k;
WHILE (j < startR) AND (a[j] <= temp) DO INC(j); END;
endBuf := startR - j; (* length of buffer actually used *)
IF (endBuf > 0) THEN (* if endBuf = 0 then already sorted *)
(* Copy from left block to buffer, omitting elements
that are already in correct place *)
h := j;
FOR b := 0 TO endBuf - 1 DO
pbuf^[b] := a[h]; INC(h);
END;
(* Fill in values from right block or buffer *)
b := 0;
i := startR;
(* j = startR - endBuf from above *)
WHILE (b < endBuf) AND (i < endR) DO
IF (pbuf^[b] <= a[i]) THEN
a[j] := pbuf^[b]; INC(b)
ELSE
a[j] := a[i]; INC(i); END;
INC(j);
END;
(* If now b = endBuf then the merge is complete.
Else just copy the remaining elements in the buffer. *)
WHILE (b < endBuf) DO
a[j] := pbuf^[b]; INC(j); INC(b);
END;
END;
END;
nR := len;
UNTIL (nR >= n);
Storage.DEALLOCATE( pbuf, bufLen*SIZE(INTEGER));
END IterativeMergeSort;
END MSIterat.
</syntaxhighlight>
<syntaxhighlight lang="modula2">
MODULE MSItDemo;
(* Demo of iterative merge sort *)
IMPORT IO, Lib;
FROM MSIterat IMPORT IterativeMergeSort;
(* Procedure to display the values in the demo array *)
PROCEDURE Display( VAR a : ARRAY OF INTEGER);
VAR
j, nrInLine : CARDINAL;
BEGIN
nrInLine := 0;
FOR j := 0 TO HIGH(a) DO
IO.WrCard( a[j], 5); INC( nrInLine);
IF (nrInLine = 10) THEN IO.WrLn; nrInLine := 0; END;
END;
IF (nrInLine > 0) THEN IO.WrLn; END;
END Display;
(* Main routine *)
CONST
ArrayLength = 50;
VAR
arr : ARRAY [0..ArrayLength - 1] OF INTEGER;
m : CARDINAL;
BEGIN
Lib.RANDOMIZE;
FOR m := 0 TO ArrayLength - 1 DO arr[m] := Lib.RANDOM( 1000); END;
IO.WrStr( 'Before:'); IO.WrLn; Display( arr);
IterativeMergeSort( arr);
IO.WrStr( 'After:'); IO.WrLn; Display( arr);
END MSItDemo.
</syntaxhighlight>
{{out}}
<pre>
Before:
236 542 526 549 869 632 446 518 909 270
826 562 469 258 681 604 921 772 548 328
147 679 71 239 772 106 477 556 451 64
941 207 87 486 280 206 380 689 964 376
298 635 552 887 387 70 287 77 610 605
After:
64 70 71 77 87 106 147 206 207 236
239 258 270 280 287 298 328 376 380 387
446 451 469 477 486 518 526 542 548 549
552 556 562 604 605 610 632 635 679 681
689 772 772 826 869 887 909 921 941 964
</pre>
===Recursive on linked list===
{{works with|TopSpeed (JPI) Modula-2 under DOSBox-X}}
According to Wikipedia, "merge sort is often the best choice for sorting a linked list". The code below shows a general procedure for merge-sorting a linked list. As in the improved Delphi version, only the pointers are moved. To carry out the Rosetta Code task, the demo program sorts an array of records on an integer-valued field.
The method for splitting a linked list is taken from "Merge sort algorithm for a singly linked list" on Techie Delight. Two pointers step through the list, one at twice the speed of the other. When the fast pointer reaches the end, the slow pointer marks the halfway point.
<syntaxhighlight lang="modula2">
DEFINITION MODULE MergSort;
TYPE MSCompare = PROCEDURE( ADDRESS, ADDRESS) : INTEGER;
TYPE MSGetNext = PROCEDURE( ADDRESS) : ADDRESS;
TYPE MSSetNext = PROCEDURE( ADDRESS, ADDRESS);
PROCEDURE DoMergeSort( VAR start : ADDRESS;
Compare : MSCompare;
GetNext : MSGetNext;
SetNext : MSSetNext);
(*
Procedures to be supplied by the caller:
Compare(a1, a2) returns -1 if a1^ is to be placed before a2^;
+1 if after; 0 if no priority.
GetNext(a) returns address of next item after a^.
SetNext(a, n) sets address of next item after a^ to n.
If a^ is last item, then address of next item is NIL.
It can be assumed that a, a1, a2 are not NIL.
*)
END MergSort.
</syntaxhighlight>
<syntaxhighlight lang="modula2">
IMPLEMENTATION MODULE MergSort;
PROCEDURE DoMergeSort( VAR start : ADDRESS;
Compare : MSCompare;
GetNext : MSGetNext;
SetNext : MSSetNext);
VAR
p1, p2, q : ADDRESS;
BEGIN
(* If list has < 2 items, do nothing *)
IF (start = NIL) THEN RETURN; END;
p1 := GetNext( start); IF (p1 = NIL) THEN RETURN; END;
(* If list has only 2 items, we'll not use recursion *)
p2 := GetNext( p1);
IF (p2 = NIL) THEN
IF (Compare( start, p1) > 0) THEN
q := start; SetNext( p1, q); SetNext( q, NIL);
start := p1;
END;
RETURN;
END;
(* List has > 2 items: split list in half *)
p1 := start;
REPEAT
p1 := GetNext( p1);
p2 := GetNext( p2);
IF (p2 <> NIL) THEN p2 := GetNext( p2); END;
UNTIL (p2 = NIL);
(* Now p1 points to last item in first half of list *)
p2 := GetNext( p1); SetNext( p1, NIL);
p1 := start;
(* Recursive calls to sort each half; p1 and p2 will be updated *)
DoMergeSort( p1, Compare, GetNext, SetNext);
DoMergeSort( p2, Compare, GetNext, SetNext);
(* Merge the sorted halves *)
IF Compare( p1, p2) < 0 THEN
start := p1; p1 := GetNext( p1);
ELSE
start := p2; p2 := GetNext( p2);
END;
q := start;
WHILE (p1 <> NIL) AND (p2 <> NIL) DO
IF Compare( p1, p2) < 0 THEN
SetNext( q, p1); q := p1; p1 := GetNext( p1);
ELSE
SetNext( q, p2); q := p2; p2 := GetNext( p2);
END;
END;
IF (p1 = NIL) THEN SetNext( q, p2) ELSE SetNext( q, p1) END;
END DoMergeSort;
END MergSort.
</syntaxhighlight>
<syntaxhighlight lang="modula2">
MODULE MergDemo;
IMPORT IO, Lib, MergSort;
TYPE PTestRec = POINTER TO TestRec;
TYPE TestRec = RECORD
Value : INTEGER;
Next : PTestRec;
END;
PROCEDURE Compare( a1, a2 : ADDRESS) : INTEGER;
VAR
p1, p2 : PTestRec;
BEGIN
p1 := a1; p2 := a2;
IF (p1^.Value < p2^.Value) THEN RETURN -1
ELSIF (p1^.Value > p2^.Value) THEN RETURN 1
ELSE RETURN 0; END;
END Compare;
PROCEDURE GetNext( a : ADDRESS) : ADDRESS;
VAR
p : PTestRec;
BEGIN
p := a; RETURN p^.Next;
END GetNext;
PROCEDURE SetNext( a, n : ADDRESS);
VAR
p : PTestRec;
BEGIN
p := a; p^.Next := n;
END SetNext;
(* Display the values in the linked list *)
PROCEDURE Display( p : PTestRec);
VAR
nrInLine : CARDINAL;
BEGIN
nrInLine := 0;
WHILE (p <> NIL) DO
IO.WrCard( p^.Value, 5);
p := p^.Next;
INC( nrInLine);
IF (nrInLine = 10) THEN IO.WrLn; nrInLine := 0; END;
END;
IF (nrInLine > 0) THEN IO.WrLn; END;
END Display;
(* Main routine *)
CONST ArraySize = 50;
VAR
arr : ARRAY [0..ArraySize - 1] OF TestRec;
j : CARDINAL;
start, p : PTestRec;
BEGIN
(* Fill values with random integers *)
FOR j := 0 TO ArraySize - 1 DO
arr[j].Value := Lib.RANDOM( 1000);
END;
(* Set up the links *)
IF (ArraySize > 1) THEN (* FOR loop 0 TO -1 crashes program *)
FOR j := 0 TO ArraySize - 2 DO
arr[j].Next := ADR( arr[j + 1]);
END;
END;
arr[ArraySize - 1].Next := NIL;
(* Demonstrate merge sort on the linked list *)
start := ADR( arr[0]);
IO.WrStr( 'Before:'); IO.WrLn;
Display( start);
MergSort.DoMergeSort( start, Compare, GetNext, SetNext);
IO.WrStr( 'After:'); IO.WrLn;
Display( start);
END MergDemo.
</syntaxhighlight>
{{out}}
<pre>
Before:
683 68 458 645 223 801 485 101 255 590
381 149 29 298 226 937 866 130 297 153
551 159 760 403 380 770 296 701 399 775
236 758 249 314 230 106 626 804 956 149
706 625 651 727 323 38 66 534 85 663
After:
29 38 66 68 85 101 106 130 149 149
153 159 223 226 230 236 249 255 296 297
298 314 323 380 381 399 403 458 485 534
551 590 625 626 645 651 663 683 701 706
727 758 760 770 775 801 804 866 937 956
</pre>
=={{header|Nemerle}}==
This is a translation of a Standard ML example from [[wp:Standard_ML#Mergesort|Wikipedia]].
<syntaxhighlight lang="nemerle">using System;
using System.Console;
using Nemerle.Collections;
module Mergesort
{
MergeSort[TEnu, TItem] (sort_me : TEnu) : list[TItem]
where TEnu : Seq[TItem]
where TItem : IComparable
{
def split(xs) {
def loop (zs, xs, ys) {
|(x::y::zs, xs, ys) => loop(zs, x::xs, y::ys)
|(x::[], xs, ys) => (x::xs, ys)
|([], xs, ys) => (xs, ys)
}
loop(xs, [], [])
}
def merge(xs, ys) {
def loop(res, xs, ys) {
|(res, [], []) => res.Reverse()
|(res, x::xs, []) => loop(x::res, xs, [])
|(res, [], y::ys) => loop(y::res, [], ys)
|(res, x::xs, y::ys) => if (x.CompareTo(y) < 0) loop(x::res, xs, y::ys)
else loop(y::res, x::xs, ys)
}
loop ([], xs, ys)
}
def ms(xs) {
|[] => []
|[x] => [x]
|_ => { def (left, right) = split(xs); merge(ms(left), ms(right)) }
}
ms(sort_me.NToList())
}
Main() : void
{
def test1 = MergeSort([1, 5, 9, 2, 7, 8, 4, 6, 3]);
def test2 = MergeSort(array['a', 't', 'w', 'f', 'c', 'y', 'l']);
WriteLine(test1);
WriteLine(test2);
}
}</syntaxhighlight>
{{out}}
<pre>[1, 2, 3, 4, 5, 6, 7, 8, 9]
[a, c, f, l, t, w, y]</pre>
=={{header|NetRexx}}==
<syntaxhighlight lang="netrexx">/* NetRexx */
options replace format comments java crossref savelog symbols binary
import java.util.List
placesList = [String -
"UK London", "US New York", "US Boston", "US Washington" -
, "UK Washington", "US Birmingham", "UK Birmingham", "UK Boston" -
]
lists = [ -
placesList -
, mergeSort(String[] Arrays.copyOf(placesList, placesList.length)) -
]
loop ln = 0 to lists.length - 1
cl = lists[ln]
loop ct = 0 to cl.length - 1
say cl[ct]
end ct
say
end ln
return
method mergeSort(m = String[]) public constant binary returns String[]
rl = String[m.length]
al = List mergeSort(Arrays.asList(m))
al.toArray(rl)
return rl
method mergeSort(m = List) public constant binary returns ArrayList
result = ArrayList(m.size)
left = ArrayList()
right = ArrayList()
if m.size > 1 then do
middle = m.size % 2
loop x_ = 0 to middle - 1
left.add(m.get(x_))
end x_
loop x_ = middle to m.size - 1
right.add(m.get(x_))
end x_
left = mergeSort(left)
right = mergeSort(right)
if (Comparable left.get(left.size - 1)).compareTo(Comparable right.get(0)) <= 0 then do
left.addAll(right)
result.addAll(m)
end
else do
result = merge(left, right)
end
end
else do
result.addAll(m)
end
return result
method merge(left = List, right = List) public constant binary returns ArrayList
result = ArrayList()
loop label mx while left.size > 0 & right.size > 0
if (Comparable left.get(0)).compareTo(Comparable right.get(0)) <= 0 then do
result.add(left.get(0))
left.remove(0)
end
else do
result.add(right.get(0))
right.remove(0)
end
end mx
if left.size > 0 then do
result.addAll(left)
end
if right.size > 0 then do
result.addAll(right)
end
return result
</syntaxhighlight>
{{out}}
<pre>
UK London
US New York
US Boston
US Washington
UK Washington
US Birmingham
UK Birmingham
UK Boston
UK Birmingham
UK Boston
UK London
UK Washington
US Birmingham
US Boston
US New York
US Washington
</pre>
=={{header|Nim}}==
<syntaxhighlight lang="nim">proc merge[T](a, b: var openarray[T]; left, middle, right: int) =
let
leftLen = middle - left
rightLen = right - middle
var
l = 0
r = leftLen
for i in left ..< middle:
b[l] = a[i]
inc l
for i in middle ..< right:
b[r] = a[i]
inc r
l = 0
r = leftLen
var i = left
while l < leftLen and r < leftLen + rightLen:
if b[l] < b[r]:
a[i] = b[l]
inc l
else:
a[i] = b[r]
inc r
inc i
while l < leftLen:
a[i] = b[l]
inc l
inc i
while r < leftLen + rightLen:
a[i] = b[r]
inc r
inc i
proc mergeSort[T](a, b: var openarray[T]; left, right: int) =
if right - left <= 1: return
let middle = (left + right) div 2
mergeSort(a, b, left, middle)
mergeSort(a, b, middle, right)
merge(a, b, left, middle, right)
proc mergeSort[T](a: var openarray[T]) =
var b = newSeq[T](a.len)
mergeSort(a, b, 0, a.len)
var a = @[4, 65, 2, -31, 0, 99, 2, 83, 782]
mergeSort a
echo a</syntaxhighlight>
{{out}}
<pre>@[-31, 0, 2, 2, 4, 65, 83, 99, 782]</pre>
=={{header|OCaml}}==
<
match n, xs with
0, xs ->
Line 955 ⟶ 5,844:
let _ =
merge_sort compare [8;6;4;2;1;3;5;7;9]</
=={{header|Oz}}==
<syntaxhighlight lang="oz">declare
fun {MergeSort Xs}
case Xs
of nil then nil
[] [X] then [X]
else
Middle = {Length Xs} div 2
Left Right
{List.takeDrop Xs Middle ?Left ?Right}
in
{List.merge {MergeSort Left} {MergeSort Right} Value.'<'}
end
end
in
{Show {MergeSort [3 1 4 1 5 9 2 6 5]}}</syntaxhighlight>
=={{header|PARI/GP}}==
Note also that the built-in <code>vecsort</code> and <code>listsort</code> use a merge sort internally.
<syntaxhighlight lang="parigp">mergeSort(v)={
if(#v<2, return(v));
my(m=#v\2,left=vector(m,i,v[i]),right=vector(#v-m,i,v[m+i]));
left=mergeSort(left);
right=mergeSort(right);
merge(left, right)
};
merge(u,v)={
my(ret=vector(#u+#v),i=1,j=1);
for(k=1,#ret,
if(i<=#u & (j>#v | u[i]<v[j]),
ret[k]=u[i];
i++
,
ret[k]=v[j];
j++
)
);
ret
};</syntaxhighlight>
=={{header|Pascal}}==
{{works with|FPC}}
<syntaxhighlight lang="pascal">
program MergeSortDemo;
{$mode objfpc}{$h+}
procedure MergeSort(var A: array of Integer);
var
Buf: array of Integer;
procedure Merge(L, M, R: Integer);
var
I, J, K: Integer;
begin
I := L;
J := Succ(M);
for K := 0 to R - L do
if (J > R) or (I <= M) and (A[I] <= A[J]) then begin
Buf[K] := A[I];
Inc(I);
end else begin
Buf[K] := A[J];
Inc(J);
end;
Move(Buf[0], A[L], Succ(R - L) * SizeOf(Integer));
end;
procedure MSort(L, R: Integer);
var
M: Integer;
begin
if R > L then begin
{$push}{$q-}{$r-}M := (L + R) shr 1;{$pop}
MSort(L, M);
MSort(M + 1, R);
if A[M] > A[M + 1] then
Merge(L, M, R);
end;
end;
begin
if Length(A) > 1 then begin
SetLength(Buf, Length(A));
MSort(0, High(A));
end;
end;
procedure PrintArray(const Name: string; const A: array of Integer);
var
I: Integer;
begin
Write(Name, ': [');
for I := 0 to High(A) - 1 do
Write(A[I], ', ');
WriteLn(A[High(A)], ']');
end;
var
a1: array[-7..5] of Integer = (27, -47, 14, 39, 47, -2, -8, 20, 18, 22, -49, -40, -8);
a2: array of Integer = (9, -25, -16, 24, 39, 42, 20, 20, 39, 10, -47, 28);
begin
MergeSort(a1);
PrintArray('a1', a1);
MergeSort(a2);
PrintArray('a2', a2);
end.
</syntaxhighlight>
{{out}}
<pre>
a1: [-49, -47, -40, -8, -8, -2, 14, 18, 20, 22, 27, 39, 47]
a2: [-47, -25, -16, 9, 10, 20, 20, 24, 28, 39, 39, 42]
</pre>
===improvement===
uses "only" one halfsized temporary array for merging, which are set to the right size in before.
small sized fields are sorted via insertion sort.
Only an array of Pointers is sorted, so no complex data transfers are needed.Sort for X,Y or whatever is easy to implement.
Works with ( Turbo -) Delphi too.
<syntaxhighlight lang="pascal">{$IFDEF FPC}
{$MODE DELPHI}
{$OPTIMIZATION ON,Regvar,ASMCSE,CSE,PEEPHOLE}
{$ELSE}
{$APPTYPE CONSOLE}
{$ENDIF}
uses
sysutils; //for timing
type
tDataElem = record
myText : AnsiString;
myX,
myY : double;
myTag,
myOrgIdx : LongInt;
end;
tpDataElem = ^tDataElem;
tData = array of tDataElem;
tSortData = array of tpDataElem;
tCompFunc = function(A,B:tpDataElem):integer;
var
Data : tData;
Sortdata,
tmpData : tSortData;
procedure InitData(var D:tData;cnt: LongWord);
var
i,k: LongInt;
begin
Setlength(D,cnt);
Setlength(SortData,cnt);
Setlength(tmpData,cnt shr 1 +1 );
k := 10*cnt;
For i := cnt-1 downto 0 do
Begin
Sortdata[i] := @D[i];
with D[i] do
Begin
myText := Format('_%.9d',[random(cnt)+1]);
myX := Random*k;
myY := Random*k;
myTag := Random(k);
myOrgIdx := i;
end;
end;
end;
procedure FreeData(var D:tData);
begin
Setlength(tmpData,0);
Setlength(SortData,0);
Setlength(D,0);
end;
function CompLowercase(A,B:tpDataElem):integer;
var
lcA,lcB: String;
Begin
lcA := lowercase(A^.myText);
lcB := lowercase(B^.myText);
result := ORD(lcA > lcB)-ORD(lcA < lcB);
end;
function myCompText(A,B:tpDataElem):integer;
{sort an array (or list) of strings in order of descending length,
and in ascending lexicographic order for strings of equal length.}
var
lA,lB:integer;
Begin
lA := Length(A^.myText);
lB := Length(B^.myText);
result := ORD(lA<lB)-ORD(lA>lB);
IF result = 0 then
result := CompLowercase(A,B);
end;
function myCompX(A,B:tpDataElem):integer;
//same as sign without jumps in assembler code
begin
result := ORD(A^.myX > B^.myX)-ORD(A^.myX < B^.myX);
end;
function myCompY(A,B:tpDataElem):integer;
Begin
result := ORD(A^.myY > B^.myY)-ORD(A^.myY < B^.myY);
end;
function myCompTag(A,B:tpDataElem):integer;
Begin
result := ORD(A^.myTag > B^.myTag)-ORD(A^.myTag < B^.myTag);
end;
procedure InsertionSort(left,right:integer;var a: tSortData;CompFunc: tCompFunc);
var
Pivot : tpDataElem;
i,j : LongInt;
begin
for i:=left+1 to right do
begin
j :=i;
Pivot := A[j];
while (j>left) AND (CompFunc(A[j-1],Pivot)>0) do
begin
A[j] := A[j-1];
dec(j);
end;
A[j] :=PiVot;// s.o.
end;
end;
procedure mergesort(left,right:integer;var a: tSortData;CompFunc: tCompFunc);
var
i,j,k,mid :integer;
begin
{// without insertion sort
If right>left then
}
//{ test insertion sort
If right-left<=14 then
InsertionSort(left,right,a,CompFunc)
else
//}
begin
//recursion
mid := (right+left) div 2;
mergesort(left, mid,a,CompFunc);
mergesort(mid+1, right,a,CompFunc);
//already sorted ?
IF CompFunc(A[Mid],A[Mid+1])<0 then
exit;
//########## Merge ##########
//copy lower half to temporary array
move(A[left],tmpData[0],(mid-left+1)*SizeOf(Pointer));
i := 0;
j := mid+1;
k := left;
// re-integrate
while (k<j) AND (j<=right) do
begin
IF CompFunc(tmpData[i],A[j])<=0 then
begin
A[k] := tmpData[i];
inc(i);
end
else
begin
A[k]:= A[j];
inc(j);
end;
inc(k);
end;
//the rest of tmpdata a move should do too, in next life
while (k<j) do
begin
A[k] := tmpData[i];
inc(i);
inc(k);
end;
end;
end;
var
T1,T0: TDateTime;
i : integer;
Begin
randomize;
InitData(Data,1*1000*1000);
T0 := Time;
mergesort(Low(SortData),High(SortData),SortData,@myCompText);
T1 := Time;
Writeln('myText ',FormatDateTime('NN:SS.ZZZ',T1-T0));
// For i := 0 to High(Data) do Write(SortData[i].myText); writeln;
T0 := Time;
mergesort(Low(SortData),High(SortData),SortData,@myCompX);
T1 := Time;
Writeln('myX ',FormatDateTime('NN:SS.ZZZ',T1-T0));
//check
For i := 1 to High(Data) do
IF myCompX(SortData[i-1],SortData[i]) = 1 then
Write(i:8);
T0 := Time;
mergesort(Low(SortData),High(SortData),SortData,@myCompY);
T1 := Time;
Writeln('myY ',FormatDateTime('NN:SS.ZZZ',T1-T0));
T0 := Time;
mergesort(Low(SortData),High(SortData),SortData,@myCompTag);
T1 := Time;
Writeln('myTag ',FormatDateTime('NN:SS.ZZZ',T1-T0));
FreeData (Data);
end.
</syntaxhighlight>
;output:
<pre>Free pascal 2.6.4 32bit / Win7 / i 4330 3.5 Ghz
myText 00:03.158 / nearly worst case , all strings same sized and starting with '_000..'
myX 00:00.360
myY 00:00.363
myTag 00:00.283
</pre>
=={{header|Perl}}==
<syntaxhighlight lang="perl">sub merge_sort {
my @x = @_;
return @x if @x < 2;
my $m = int @x / 2;
my @a = merge_sort(@x[0 .. $m - 1]);
my @b = merge_sort(@x[$m .. $#x]);
for (@x) {
$_ = !@a ? shift @b
: !@b ? shift @a
: $a[0] <= $b[0] ? shift @a
: shift @b;
}
@x;
}
my @a = (4, 65, 2, -31, 0, 99, 83, 782, 1);
@a = merge_sort @a;
print "@a\n";</syntaxhighlight>
Also note, the built-in function [http://perldoc.perl.org/functions/sort.html sort] uses mergesort.
=={{header|Phix}}==
<!--<syntaxhighlight lang="phix">(phixonline)-->
<span style="color: #008080;">with</span> <span style="color: #008080;">javascript_semantics</span>
<span style="color: #008080;">function</span> <span style="color: #000000;">merge</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">left</span><span style="color: #0000FF;">,</span> <span style="color: #004080;">sequence</span> <span style="color: #000000;">right</span><span style="color: #0000FF;">)</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">result</span> <span style="color: #0000FF;">=</span> <span style="color: #0000FF;">{}</span>
<span style="color: #008080;">while</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">left</span><span style="color: #0000FF;">)></span><span style="color: #000000;">0</span> <span style="color: #008080;">and</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">right</span><span style="color: #0000FF;">)></span><span style="color: #000000;">0</span> <span style="color: #008080;">do</span>
<span style="color: #008080;">if</span> <span style="color: #000000;">left</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">]<=</span><span style="color: #000000;">right</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">]</span> <span style="color: #008080;">then</span>
<span style="color: #000000;">result</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">append</span><span style="color: #0000FF;">(</span><span style="color: #000000;">result</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">left</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">])</span>
<span style="color: #000000;">left</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">left</span><span style="color: #0000FF;">[</span><span style="color: #000000;">2</span><span style="color: #0000FF;">..$]</span>
<span style="color: #008080;">else</span>
<span style="color: #000000;">result</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">append</span><span style="color: #0000FF;">(</span><span style="color: #000000;">result</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">right</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">])</span>
<span style="color: #000000;">right</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">right</span><span style="color: #0000FF;">[</span><span style="color: #000000;">2</span><span style="color: #0000FF;">..$]</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">while</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">result</span> <span style="color: #0000FF;">&</span> <span style="color: #000000;">left</span> <span style="color: #0000FF;">&</span> <span style="color: #000000;">right</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
<span style="color: #008080;">function</span> <span style="color: #000000;">mergesort</span><span style="color: #0000FF;">(</span><span style="color: #004080;">sequence</span> <span style="color: #000000;">m</span><span style="color: #0000FF;">)</span>
<span style="color: #008080;">if</span> <span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">m</span><span style="color: #0000FF;">)<=</span><span style="color: #000000;">1</span> <span style="color: #008080;">then</span> <span style="color: #008080;">return</span> <span style="color: #000000;">m</span> <span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #004080;">integer</span> <span style="color: #000000;">middle</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">floor</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">length</span><span style="color: #0000FF;">(</span><span style="color: #000000;">m</span><span style="color: #0000FF;">)/</span><span style="color: #000000;">2</span><span style="color: #0000FF;">)</span>
<span style="color: #004080;">sequence</span> <span style="color: #000000;">left</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">mergesort</span><span style="color: #0000FF;">(</span><span style="color: #000000;">m</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">..</span><span style="color: #000000;">middle</span><span style="color: #0000FF;">]),</span>
<span style="color: #000000;">right</span> <span style="color: #0000FF;">=</span> <span style="color: #000000;">mergesort</span><span style="color: #0000FF;">(</span><span style="color: #000000;">m</span><span style="color: #0000FF;">[</span><span style="color: #000000;">middle</span><span style="color: #0000FF;">+</span><span style="color: #000000;">1</span><span style="color: #0000FF;">..$])</span>
<span style="color: #008080;">if</span> <span style="color: #000000;">left</span><span style="color: #0000FF;">[$]<=</span><span style="color: #000000;">right</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">]</span> <span style="color: #008080;">then</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">left</span> <span style="color: #0000FF;">&</span> <span style="color: #000000;">right</span>
<span style="color: #008080;">elsif</span> <span style="color: #000000;">right</span><span style="color: #0000FF;">[$]<=</span><span style="color: #000000;">left</span><span style="color: #0000FF;">[</span><span style="color: #000000;">1</span><span style="color: #0000FF;">]</span> <span style="color: #008080;">then</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">right</span> <span style="color: #0000FF;">&</span> <span style="color: #000000;">left</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">if</span>
<span style="color: #008080;">return</span> <span style="color: #000000;">merge</span><span style="color: #0000FF;">(</span><span style="color: #000000;">left</span><span style="color: #0000FF;">,</span> <span style="color: #000000;">right</span><span style="color: #0000FF;">)</span>
<span style="color: #008080;">end</span> <span style="color: #008080;">function</span>
<span style="color: #008080;">constant</span> <span style="color: #000000;">s</span> <span style="color: #0000FF;">=</span> <span style="color: #7060A8;">shuffle</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">tagset</span><span style="color: #0000FF;">(</span><span style="color: #000000;">10</span><span style="color: #0000FF;">))</span>
<span style="color: #0000FF;">?</span> <span style="color: #000000;">s</span>
<span style="color: #0000FF;">?</span> <span style="color: #000000;">mergesort</span><span style="color: #0000FF;">(</span><span style="color: #7060A8;">deep_copy</span><span style="color: #0000FF;">(</span><span style="color: #000000;">s</span><span style="color: #0000FF;">))</span>
<!--</syntaxhighlight>-->
{{out}}
<pre>
{8,1,2,5,10,3,9,6,7,4}
{1,2,3,4,5,6,7,8,9,10}
</pre>
=={{header|PHP}}==
<syntaxhighlight lang="php">function mergesort($arr){
if(count($arr) == 1 ) return $arr;
$mid = count($arr) / 2;
$left = array_slice($arr, 0, $mid);
$right = array_slice($arr, $mid);
$left = mergesort($left);
$right = mergesort($right);
return merge($left, $right);
}
function merge($left, $right){
$res = array();
while (count($left) > 0 && count($right) > 0){
if($left[0] > $right[0]){
$res[] = $right[0];
$right = array_slice($right , 1);
}else{
$res[] = $left[0];
$left = array_slice($left, 1);
}
}
while (count($left) > 0){
$res[] = $left[0];
$left = array_slice($left, 1);
}
while (count($right) > 0){
$res[] = $right[0];
$right = array_slice($right, 1);
}
return $res;
}
$arr = array( 1, 5, 2, 7, 3, 9, 4, 6, 8);
$arr = mergesort($arr);
echo implode(',',$arr);</syntaxhighlight>
{{out}}
<pre>1,2,3,4,5,6,7,8,9</pre>
=={{header|Picat}}==
{{trans|Prolog}}
<syntaxhighlight lang="picat">% True if S is a sorted copy of L, using merge sort
msort([],[]).
msort([X],[X]).
msort(U,S) :-
split(U, L, R),
msort(L, SL),
msort(R, SR),
merge(SL, SR, S).
% split(LIST,L,R)
% Alternate elements of LIST in L and R
split([],[],[]).
split([X],[X],[]).
split([L,R|T],[L|LT],[R|RT]) :-
split( T, LT, RT ).
% merge( LS, RS, M )
% Assuming LS and RS are sorted, True if M is the sorted merge of the two
merge([],RS,RS).
merge(LS,[],LS).
merge([L|LS],[R|RS],[L|T]) :-
L @=< R,
merge(LS,[R|RS],T).
merge([L|LS],[R|RS],[R|T]) :-
L @> R,
merge([L|LS],RS,T).</syntaxhighlight>
=={{header|PicoLisp}}==
PicoLisp's built-in sort routine uses merge sort. This is a high level implementation.
<syntaxhighlight lang="lisp">(de alt (List)
(if List (cons (car List) (alt (cddr List))) ()) )
(de merge (L1 L2)
(cond
((not L2) L1)
((< (car L1) (car L2))
(cons (car L1) (merge L2 (cdr L1))))
(T (cons (car L2) (merge L1 (cdr L2)))) ) )
(de mergesort (List)
(if (cdr List)
(merge (mergesort (alt List)) (mergesort (alt (cdr List))))
List) )
(mergesort (8 1 5 3 9 0 2 7 6 4))</syntaxhighlight>
=={{header|PL/I}}==
<
/* Merge A(1:LA) with B(1:LB), putting the result in C
Line 1,006 ⟶ 6,369:
CALL MERGE(TP,M,AMP1,N-M,AP);
RETURN;
END MERGESORT;</
=={{header|PowerShell}}==
<syntaxhighlight lang="powershell">
function MergeSort([object[]] $SortInput)
{
# The base case exits for minimal lists that are sorted by definition
if ($SortInput.Length -le 1) {return $SortInput}
# Divide and conquer
[int] $midPoint = $SortInput.Length/2
# The @() operators ensure a single result remains typed as an array
[object[]] $left = @(MergeSort @($SortInput[0..($midPoint-1)]))
[object[]] $right = @(MergeSort @($SortInput[$midPoint..($SortInput.Length-1)]))
# Merge
[object[]] $result = @()
while (($left.Length -gt 0) -and ($right.Length -gt 0))
{
if ($left[0] -lt $right[0])
{
$result += $left[0]
# Use an if/else rather than accessing the array range as $array[1..0]
if ($left.Length -gt 1){$left = $left[1..$($left.Length-1)]}
else {$left = @()}
}
else
{
$result += $right[0]
# Without the if/else, $array[1..0] would return the whole array when $array.Length == 1
if ($right.Length -gt 1){$right = $right[1..$($right.Length-1)]}
else {$right = @()}
}
}
# If we get here, either $left or $right is an empty array (or both are empty!). Since the
# rest of the unmerged array is already sorted, we can simply string together what we have.
# This line outputs the concatenated result. An explicit 'return' statement is not needed.
$result + $left + $right
}
</syntaxhighlight>
=={{header|Prolog}}==
<
% True if S is a sorted copy of L, using merge sort
msort( [], [] ).
Line 1,026 ⟶ 6,429:
merge( LS, [], LS ).
merge( [L|LS], [R|RS], [L|T] ) :- L =< R, merge( LS, [R|RS], T).
merge( [L|LS], [R|RS], [R|T] ) :- L > R, merge( [L|LS], RS, T).</
=={{header|
A non-optimized version with lists.
<syntaxhighlight lang="purebasic">Procedure display(List m())
ForEach m()
Print(LSet(Str(m()), 3," "))
Next
PrintN("")
EndProcedure
;overwrites list m() with the merger of lists ma() and mb()
Procedure merge(List m(), List ma(), List mb())
FirstElement(m())
Protected ma_elementExists = FirstElement(ma())
Protected mb_elementExists = FirstElement(mb())
Repeat
If ma() <= mb()
m() = ma(): NextElement(m())
ma_elementExists = NextElement(ma())
Else
m() = mb(): NextElement(m())
mb_elementExists = NextElement(mb())
EndIf
Until Not (ma_elementExists And mb_elementExists)
If ma_elementExists
Repeat
Until Not NextElement(ma())
ElseIf mb_elementExists
Repeat
m() = mb(): NextElement(m())
Until Not NextElement(mb())
EndIf
EndProcedure
Procedure mergesort(List m())
Protected NewList ma()
Protected NewList mb()
If ListSize(m()) > 1
Protected current, middle = (ListSize(m()) / 2 ) - 1
FirstElement(m())
While current <= middle
AddElement(ma())
ma() = m()
NextElement(m()): current + 1
Wend
PreviousElement(m())
While NextElement(m())
AddElement(mb())
mb() = m()
Wend
mergesort(ma())
mergesort(mb())
LastElement(ma()): FirstElement(mb())
If ma() <= mb()
FirstElement(m())
FirstElement(ma())
Repeat
m() = ma(): NextElement(m())
Until Not NextElement(ma())
Repeat
m() = mb(): NextElement(m())
Until Not NextElement(mb())
Else
merge(m(), ma(), mb())
EndIf
EndIf
EndProcedure
If OpenConsole()
Define i
NewList x()
For i = 1 To 21: AddElement(x()): x() = Random(60): Next
display(x())
mergesort(x())
display(x())
Print(#CRLF$ + #CRLF$ + "Press ENTER to exit")
Input()
CloseConsole()
EndIf</syntaxhighlight>
{{out|Sample output}}
<pre>22 51 31 59 58 45 11 2 16 56 38 42 2 10 23 41 42 25 45 28 42
2 2 10 11 16 22 23 25 28 31 38 41 42 42 42 45 45 51 56 58 59</pre>
=={{header|Python}}==
{{works with|Python|2.6+}}
<
def merge_sort(m):
Line 1,062 ⟶ 6,529:
return m
middle = len(m) // 2
left = m[:middle]
right = m[middle:]
Line 1,068 ⟶ 6,535:
left = merge_sort(left)
right = merge_sort(right)
return list(merge(left, right))</
Pre-2.6, merge() could be implemented like this:
<
result = []
left_idx, right_idx = 0, 0
while left_idx < len(left) and right_idx < len(right):
# change the direction of this comparison to change the direction of the sort
if left[
result.append(left
left_idx += 1
else:
result.append(right
right_idx += 1
if left_idx < len(left):
result.extend(left[left_idx:])
if right_idx < len(right):
result.extend(right[right_idx:])
return result</syntaxhighlight>
using only recursions
<syntaxhighlight lang="python">def merge(x, y):
if x==[]: return y
if y==[]: return x
return [x[0]] + merge(x[1:], y) if x[0]<y[0] else [y[0]] + merge(x, y[1:])
def sort(a, n):
m = n//2
return a if n<=1 else merge(sort(a[:m], m), sort(a[m:], n-m))
a = list(map(int, input().split()))
print(sort(a, len(a)))</syntaxhighlight>
=={{header|Quackery}}==
<syntaxhighlight lang="quackery">[ [] temp put
[ dup [] != while
over [] != while
over 0 peek
over 0 peek
> not if dip
[ 1 split
temp take
rot join
temp put ]
again ]
join
temp take swap join ] is merge ( [ [ --> [ )
[ dup size 2 < if
dup size 2 / split
swap recurse
swap recurse
merge ] is mergesort ( [ --> [ )</syntaxhighlight>
=={{header|R}}==
<
{
merge_ <- function(left, right)
Line 1,127 ⟶ 6,629:
}
}
mergesort(c(4, 65, 2, -31, 0, 99, 83, 782, 1)) # -31 0 1 2 4 65 83 99 782</
=={{header|
<syntaxhighlight lang="racket">
#lang racket
(define (merge xs ys)
(cond [(empty? xs) ys]
[(match* (xs ys)
[((list* a as) (list* b bs))
(cond [(<= a b) (cons a (merge as ys))]
[ (cons b (merge xs bs))])])]))
(define (merge-sort xs)
(match xs
[(or (list) (list _)) xs]
[_ (define-values (ys zs) (split-at xs (quotient (length xs) 2)))
(merge (merge-sort ys) (merge-sort zs))]))
</syntaxhighlight>
This variation is bottom up:
<syntaxhighlight lang="racket">
#lang racket
(define (merge-sort xs)
(merge* (map list xs)))
(define (merge* xss)
(match xss
[(list) '()]
[(list xs) xss]
[(list xs ys zss ...)
(merge* (cons (merge xs ys) (merge* zss)))]))
(define (merge xs ys)
(cond [(empty? xs) ys]
[(empty? ys) xs]
[(match* (xs ys)
[((list* a as) (list* b bs))
(cond [(<= a b) (cons a (merge as ys))]
[ (cons b (merge xs bs))])])]))
</syntaxhighlight>
=={{header|Raku}}==
<syntaxhighlight lang="raku" line>
#| Recursive, single-thread, mergesort implementation
sub mergesort ( @a ) {
return @a if @a <= 1;
# recursion step
my $m = @a.elems div 2;
my @l = samewith @a[ 0 ..^ $m ];
my @r = samewith @a[ $m ..^ @a ];
# short cut - in case of no overlapping in left and right parts
return flat @l, @r if @l[*-1] !after @r[0];
return flat @r, @l if @r[*-1] !after @l[0];
# merge step
return flat gather {
take @l[0] before @r[0]
?? @l.shift
!! @r.shift
while @l and @r;
take @l, @r;
}
}</syntaxhighlight>
Some intial testing
<syntaxhighlight lang="raku" line>
my @data = 6, 7, 2, 1, 8, 9, 5, 3, 4;
say 'input = ' ~ @data;
say 'output = ' ~ @data.&merge_sort;</syntaxhighlight>
{{out}}
<pre>input = 6 7 2 1 8 9 5 3 4
output = 1 2 3 4 5 6 7 8 9</pre>
===concurrent implementation===
Let's implement it using parallel sorting.
<syntaxhighlight lang="raku" line>
#| Recursive, naive multi-thread, mergesort implementation
sub mergesort-parallel-naive ( @a ) {
return @a if @a <= 1;
my $m = @a.elems div 2;
# recursion step launching new thread
my @l = start { samewith @a[ 0 ..^ $m ] };
# meanwhile recursively sort right side
my @r = samewith @a[ $m ..^ @a ] ;
# as we went parallel on left side, we need to await the result
await @l[0] andthen @l = @l[0].result;
# short cut - in case of no overlapping left and right parts
return flat @l, @r if @l[*-1] !after @r[0];
return flat @r, @l if @r[*-1] !after @l[0];
# merge step
return flat gather {
take @l[0] before @r[0]
?? @l.shift
!! @r.shift
while @l and @r;
take @l, @r;
}
}
</syntaxhighlight>
and tune the batch size required to launch a new thread.
<syntaxhighlight lang="raku" line>
#| Recursive, batch tuned multi-thread, mergesort implementation
sub mergesort-parallel ( @a, $batch = 2**9 ) {
return @a if @a <= 1;
my $m = @a.elems div 2;
# recursion step
my @l = $m >= $batch
?? start { samewith @a[ 0 ..^ $m ], $batch }
!! samewith @a[ 0 ..^ $m ], $batch ;
# meanwhile recursively sort right side
my @r = samewith @a[ $m ..^ @a ], $batch;
# if we went parallel on left side, we need to await the result
await @l[0] andthen @l = @l[0].result if @l[0] ~~ Promise;
# short cut - in case of no overlapping left and right parts
return flat @l, @r if @l[*-1] !after @r[0];
return flat @r, @l if @r[*-1] !after @l[0];
# merge step
return flat gather {
take @l[0] before @r[0]
?? @l.shift
!! @r.shift
while @l and @r;
take @l, @r;
}
}
</syntaxhighlight>
===testing===
Let's run some tests ...
<syntaxhighlight lang="raku" line>
say "x" x 10 ~ " Testing " ~ "x" x 10;
use Test;
my @functions-under-test = &mergesort, &mergesort-parallel-naive, &mergesort-parallel;
my @testcases =
() => (),
<a>.List => <a>.List,
<a a> => <a a>,
("b", "a", 3) => (3, "a", "b"),
<h b a c d f e g> => <a b c d e f g h>,
<a 🎮 3 z 4 🐧> => <a 🎮 3 z 4 🐧>.sort
;
plan @testcases.elems * @functions-under-test.elems;
for @functions-under-test -> &fun {
say &fun.name;
is-deeply &fun(.key), .value, .key ~ " => " ~ .value for @testcases;
}
done-testing;
</syntaxhighlight>
{{out}}
<pre>xxxxxxxxxx Testing xxxxxxxxxx
1..18
mergesort
ok 1 - =>
ok 2 - a => a
ok 3 - a a => a a
ok 4 - b a 3 => 3 a b
ok 5 - h b a c d f e g => a b c d e f g h
ok 6 - a 🎮 3 z 4 🐧 => 3 4 a z 🎮 🐧
mergesort-parallel-naive
ok 7 - =>
ok 8 - a => a
ok 9 - a a => a a
ok 10 - b a 3 => 3 a b
ok 11 - h b a c d f e g => a b c d e f g h
ok 12 - a 🎮 3 z 4 🐧 => 3 4 a z 🎮 🐧
mergesort-parallel
ok 13 - =>
ok 14 - a => a
ok 15 - a a => a a
ok 16 - b a 3 => 3 a b
ok 17 - h b a c d f e g => a b c d e f g h
ok 18 - a 🎮 3 z 4 🐧 => 3 4 a z 🎮 🐧</pre>
===benchmarking===
and some Benchmarking.
<syntaxhighlight lang="raku" line>
use Benchmark;
my $runs = 5;
my $elems = 10 * Kernel.cpu-cores * 2**10;
my @unsorted of Str = ('a'..'z').roll(8).join xx $elems;
my UInt $l-batch = 2**13;
my UInt $m-batch = 2**11;
my UInt $s-batch = 2**9;
my UInt $t-batch = 2**7;
say "elements: $elems, runs: $runs, cpu-cores: {Kernel.cpu-cores}, large/medium/small/tiny-batch: $l-batch/$m-batch/$s-batch/$t-batch";
my %results = timethese $runs, {
single-thread => { mergesort(@unsorted) },
parallel-naive => { mergesort-parallel-naive(@unsorted) },
parallel-tiny-batch => { mergesort-parallel(@unsorted, $t-batch) },
parallel-small-batch => { mergesort-parallel(@unsorted, $s-batch) },
parallel-medium-batch => { mergesort-parallel(@unsorted, $m-batch) },
parallel-large-batch => { mergesort-parallel(@unsorted, $l-batch) },
}, :statistics;
my @metrics = <mean median sd>;
my $msg-row = "%.4f\t" x @metrics.elems ~ '%s';
say @metrics.join("\t");
for %results.kv -> $name, %m {
say sprintf($msg-row, %m{@metrics}, $name);
}
</syntaxhighlight>
<pre>
elements: 40960, runs: 5, cpu-cores: 4, large/medium/small/tiny-batch: 8192/2048/512/128
mean median sd
7.7683 8.0265 0.5724 parallel-naive
3.1354 3.1272 0.0602 parallel-tiny-batch
2.6932 2.6599 0.1831 parallel-medium-batch
2.8139 2.7832 0.0641 parallel-large-batch
3.0908 3.0593 0.0675 parallel-small-batch
5.9989 5.9450 0.1518 single-thread
</pre>
=={{header|REBOL}}==
<pre>msort: function [a compare] [msort-do merge] [
if (length? a) < 2 [return a]
; define a recursive Msort-do function
msort-do: function [a b l] [mid] [
either l < 4 [
if l = 3 [msort-do next b next a 2]
merge a b 1 next b l - 1
] [
mid: make integer! l / 2
msort-do b a mid
msort-do skip b mid skip a mid l - mid
merge a b mid skip b mid l - mid
]
]
; function Merge is the key part of the algorithm
merge: func [a b lb c lc] [
until [
either (compare first b first c) [
change/only a first b
b: next b
a: next a
zero? lb: lb - 1
] [
change/only a first c
c: next c
a: next a
zero? lc: lc - 1
]
]
loop lb [
change/only a first b
b: next b
a: next a
]
loop lc [
change/only a first c
c: next c
a: next a
]
]
msort-do a copy a length? a
a
]</pre>
=={{header|Refal}}==
<syntaxhighlight lang="refal">$ENTRY Go {
, 7 6 5 9 8 4 3 1 2 0: e.Arr
= <Prout e.Arr>
<Prout <Sort e.Arr>>;
};
Sort {
= ;
s.N = s.N;
e.X, <Split e.X>: (e.L) (e.R) = <Merge (<Sort e.L>) (<Sort e.R>)>;
};
Split {
(e.L) (e.R) = (e.L) (e.R);
(e.L) (e.R) s.X = (e.L s.X) (e.R);
(e.L) (e.R) s.X s.Y e.Z = <Split (e.L s.X) (e.R s.Y) e.Z>;
e.X = <Split () () e.X>;
};
Merge {
(e.L) () = e.L;
() (e.R) = e.R;
(s.X e.L) (s.Y e.R), <Compare s.X s.Y>: {
'-' = s.X <Merge (e.L) (s.Y e.R)>;
s.Z = s.Y <Merge (s.X e.L) (e.R)>;
};
};</syntaxhighlight>
{{out}}
<pre>7 6 5 9 8 4 3 1 2 0
0 1 2 3 4 5 6 7 8 9</pre>
=={{header|REXX}}==
Note: the array elements can be anything: integers, floating point (exponentiated), character strings ···
<syntaxhighlight lang="rexx">/*REXX pgm sorts a stemmed array (numbers and/or chars) using the merge─sort algorithm.*/
call init /*sinfully initialize the @ array. */
call show 'before sort' /*show the "before" array elements. */
say copies('▒', 75) /*display a separator line to the term.*/
call merge # /*invoke the merge sort for the array*/
call show ' after sort' /*show the "after" array elements. */
exit 0 /*stick a fork in it, we're all done. */
/*──────────────────────────────────────────────────────────────────────────────────────*/
init: @.=; @.1= '---The seven deadly sins---' ; @.4= "avarice" ; @.7= 'gluttony'
@.2= '===========================' ; @.5= "wrath" ; @.8= 'sloth'
@.3= 'pride' ; @.6= "envy" ; @.9= 'lust'
do #=1 until @.#==''; end; #= #-1; return /*#: # of entries in @ array.*/
/*──────────────────────────────────────────────────────────────────────────────────────*/
show: do j=1 for #; say right('element',20) right(j,length(#)) arg(1)":" @.j; end; return
/*──────────────────────────────────────────────────────────────────────────────────────*/
merge: procedure expose @. !.; parse arg n, L; if L=='' then do; !.=; L= 1; end
if n==1 then return; h= L + 1
if n==2 then do; if @.L>@.h then do; _=@.h; @.h=@.L; @.L=_; end; return; end
m= n % 2 /* [↑] handle case of two items.*/
call merge n-m, L+m /*divide items to the left ···*/
call merger m, L, 1 /* " " " " right ···*/
i= 1; j= L + m
do k=L while k<j /*whilst items on right exist ···*/
if j==L+n | !.i<=@.j then do; @.k= !.i; i= i + 1; end
else do; @.k= @.j; j= j + 1; end
end /*k*/
return
/*──────────────────────────────────────────────────────────────────────────────────────*/
merger: procedure expose @. !.; parse arg n,L,T
if n==1 then do; !.T= @.L; return; end
if n==2 then do; h= L + 1; q= T + 1; !.q= @.L; !.T= @.h; return; end
m= n % 2 /* [↑] handle case of two items.*/
call merge m, L /*divide items to the left ···*/
call merger n-m, L+m, m+T /* " " " " right ···*/
i= L; j= m + T
do k=T while k<j /*whilst items on left exist ···*/
if j==T+n | @.i<=!.j then do; !.k= @.i; i= i + 1; end
else do; !.k= !.j; j= j + 1; end
end /*k*/
return</syntaxhighlight>
{{out|output|text= when using the default input:}}
(Shown at three-quarter size.)
<pre style="font-size:75%">
element 1 before sort: ---The seven deadly sins---
element 2 before sort: ===========================
element 3 before sort: pride
element 4 before sort: avarice
element 5 before sort: wrath
element 6 before sort: envy
element 7 before sort: gluttony
element 8 before sort: sloth
element 9 before sort: lust
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
element 1 after sort: ---The seven deadly sins---
element 2 after sort: ===========================
element 3 after sort: avarice
element 4 after sort: envy
element 5 after sort: gluttony
element 6 after sort: lust
element 7 after sort: pride
element 8 after sort: sloth
element 9 after sort: wrath
</pre>
=={{header|Ruby}}==
<syntaxhighlight lang="ruby">def merge_sort(m)
return m if m.length <= 1
middle = m.length / 2
left = merge_sort(m[0...middle])
right = merge_sort(m[middle..-1])
merge(left, right)
end
def merge(left, right)
until left.empty? || right.empty?
result << (left.first<=right.first ? left.shift : right.shift)
end
result + left + right
end
ary = [7,6,5,9,8,4,3,1,2,0]
p merge_sort(ary) # => [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]</syntaxhighlight>
Here's a version that monkey patches the Array class, with an example that demonstrates it's a stable sort
<
def mergesort(&comparitor)
return self if length <= 1
comparitor ||= proc{|a, b| a <=> b}
middle = length / 2
left
right =
merge(left, right, comparitor)
end
private
def merge(left, right, comparitor)
until left.empty? || right.empty?
# change the direction of this comparison to change the direction of the sort
if comparitor[left.first, right.first] <= 0
result << left.shift
else
result << right.shift
end
end
result + left + right
end
end
ary = [7,6,5,9,8,4,3,1,2,0]
p ary.mergesort # => [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
p ary.mergesort {|a, b| b <=> a} # => [9, 8, 7, 6, 5, 4, 3, 2, 1, 0]
ary = [["UK", "London"], ["US", "New York"], ["US", "Birmingham"], ["UK", "Birmingham"]]
p ary.mergesort
# => [["
p ary.mergesort {|a, b| a[1] <=> b[1]}
# => [["US", "Birmingham"], ["UK", "Birmingham"], ["UK", "London"], ["US", "New York"]]</syntaxhighlight>
=={{header|
{{works with|rustc|1.9.0}}
Recursive with buffer equal to the size of the sort vector
<syntaxhighlight lang="rust">
pub fn merge_sort1<T: Copy + Ord>(v: &mut [T]) {
sort(v, &mut Vec::new());
fn sort<T: Copy + Ord>(v: &mut [T], t: &mut Vec<T>) {
match
0
// n if n <= 20 => insertion_sort(
n =>
if t.is_empty() {
t.reserve_exact(n);
t.resize(n, v[0]);
}
let m = n / 2;
sort(&mut v[..m], t);
sort(&mut v[m..], t);
if v[m - 1] <= v[m] {
return;
}
copy(v, t);
merge(&t[..m], &t[m..n], v);
}
}
}
// merge a + b -> c
#[inline(always)]
fn merge<T: Copy + Ord>(a: &[T], b: &[T], c: &mut [T]) {
let (mut i, mut j) = (0, 0);
for k in 0..c.len() {
if i < a.len() && (j >= b.len() || a[i] <= b[j]) {
c[k] = a[i];
i += 1;
} else {
c[k] = b[j];
j += 1;
}
}
}
fn copy<T: Copy>(src: &[T], dst: &mut [T])
for i in 0..src.len(
}
}
#[inline(always)]
fn insertion_sort<T: Ord>(v: &mut [T]) {
for i in 1..v.len() {
let mut j = i;
while j > 0 && v[j] < v[j - 1] {
v.swap(j, j - 1);
j -= 1;
}
}
}
}
</syntaxhighlight>
Recursive with buffer equal to half the size of the sort vector
<syntaxhighlight lang="rust">
pub fn merge_sort2<T: Copy + Ord>(v: &mut [T]) {
sort(v, &mut Vec::new());
fn sort<T: Copy + Ord>(v: &mut [T], t: &mut Vec<T>) {
match v.len() {
0 | 1 => (),
// n if n <= 20 => insertion_sort(v),
n => {
let m = n / 2;
if t.is_empty() {
t.reserve_exact(m);
t.resize(m, v[0]);
}
sort(&mut v[..m], t);
sort(&mut v[m..], t);
if v[m - 1] <= v[m] {
return;
}
copy(&v[..m], t);
merge(&t[..m], v);
}
}
}
// merge a + b[a.len..] -> b
#[inline(always)]
fn merge<T: Copy + Ord>(a: &[T], b: &mut [T]) {
let (mut i, mut j) = (0, a.len());
for k in 0..b.len() {
if i < a.len() && (j >= b.len() || a[i] <= b[j]) {
b[k] = a[i];
i += 1;
} else {
b[k] = b[j];
j += 1;
}
}
}
#[inline(always)]
fn copy<T: Copy>(src: &[T], dst: &mut [T]) {
for i in 0..src.len() {
dst[i] = src[i];
}
}
}
</syntaxhighlight>
Version without recursion call:
<syntaxhighlight lang="rust">
pub fn merge_sort3<T: Copy + Ord>(v: &mut [T]) {
match v.len() {
0 | 1 => (),
n => {
let mut t = Vec::with_capacity(n);
t.resize(n, v[0]);
let mut p = 1;
while p < n {
p = merge_blocks(v, &mut t, p, n);
if p >= n {
copy(&t, v);
return;
}
p = merge_blocks(&t, v, p, n);
}
}
}
#[inline(always)]
fn merge_blocks<T: Copy + Ord>(a: &[T], b: &mut [T], p: usize, n: usize) -> usize {
let mut i = 0;
while i < n {
if i + p >= n {
copy(&a[i..], &mut b[i..])
} else if i + p * 2 > n {
merge(&a[i..i + p], &a[i + p..], &mut b[i..]);
} else {
merge(&a[i..i + p], &a[i + p..i + p * 2], &mut b[i..i + p * 2]);
}
i += p * 2;
}
p * 2
}
// merge a + b -> c
#[inline(always)]
fn merge<T: Copy + Ord>(a: &[T], b: &[T], c: &mut [T]) {
let (mut i, mut j, mut k) = (0, 0, 0);
while i < a.len() && j < b.len() {
if a[i] < b[j] {
c[k] = a[i];
i += 1;
} else {
c[k] = b[j];
j += 1;
}
k += 1;
}
if i < a.len() {
copy(&a[i..], &mut c[k..]);
}
if j < b.len() {
copy(&b[j..], &mut c[k..]);
}
}
#[inline(always)]
fn copy<T: Copy>(src: &[T], dst: &mut [T]) {
for i in 0..src.len() {
dst[i] = src[i];
}
}
}
</syntaxhighlight>
=={{header|Scala}}==
The use of LazyList as the merge result avoids stack overflows without resorting to
tail recursion, which would typically require reversing the result, as well as being
a bit more convoluted.
<syntaxhighlight lang="scala">
import scala.language.implicitConversions
object MergeSort extends App {
def mergeSort(input: List[Int]): List[Int] = {
def merge(left: List[Int], right: List[Int]): LazyList[Int] = (left, right) match {
case (x :: xs, y :: ys) if x <= y => x #:: merge(xs, right)
case (x :: xs, y :: ys) => y #:: merge(left, ys)
case _ => if (left.isEmpty) right.to(LazyList) else left.to(LazyList)
}
def sort(input: List[Int], length: Int): List[Int] = input match {
case Nil | List(_) => input
case _ =>
val middle = length / 2
val (left, right) = input splitAt middle
merge(sort(left, middle), sort(right, middle + length % 2)).toList
}
sort(input, input.length)
}
}
</syntaxhighlight>
=={{header|Scheme}}==
<syntaxhighlight lang="scheme">(define (merge-sort l gt?)
(define (merge left right)
(cond
((null? left)
right)
((null? right)
left)
((gt? (car left) (car right))
(cons (car right)
(merge left (cdr right))))
(else
(cons (car left)
(merge (cdr left) right)))))
(define (take l n)
(if (zero? n)
(list)
(cons (car l)
(take (cdr l) (- n 1)))))
(let ((half (quotient (length l) 2)))
(if (zero? half)
l
(merge (merge-sort (take l half) gt?)
(merge-sort (list-tail l half) gt?)))))</syntaxhighlight>
(merge-sort '(1 3 5 7 9 8 6 4 2) >)
=={{header|Seed7}}==
<
local
var integer: mid is 0;
Line 1,248 ⟶ 7,324:
t_hi := succ(mid);
for k range lo to hi do
if t_lo <= mid and (t_hi > hi or arr[t_lo] <= arr[t_hi]) then
scratch[k] := arr[t_lo];
incr(t_lo);
Line 1,268 ⟶ 7,344:
scratch := length(arr) times elemType.value;
mergeSort2(arr, 1, length(arr), scratch);
end func;</
Original source: [http://seed7.sourceforge.net/algorith/sorting.htm#mergeSort2]
=={{header|SETL}}==
<syntaxhighlight lang="setl">program merge_sort;
test := [-8, 241, 9, 316, -6, 3, 413, 9, 10];
print(test, '=>', mergesort(test));
proc mergesort(m);
if #m <= 1 then
return m;
end if;
middle := #m div 2;
left := mergesort(m(..middle));
right := mergesort(m(middle+1..));
if left(#left) <= right(1) then
return left + right;
end if;
return merge(left, right);
end proc;
proc merge(left, right);
result := [];
loop while left /= [] and right /= [] do
if left(1) <= right(1) then
item fromb left;
else
item fromb right;
end if;
result with:= item;
end loop;
return result + left + right;
end proc;
end program;</syntaxhighlight>
{{out}}
<pre>[-8 241 9 316 -6 3 413 9 10] => [-8 -6 3 9 9 10 241 316 413]</pre>
=={{header|Sidef}}==
<syntaxhighlight lang="ruby">func merge(left, right) {
var result = []
while (left && right) {
result << [right,left].min_by{.first}.shift
}
result + left + right
}
func mergesort(array) {
var len = array.len
len < 2 && return array
var (left, right) = array.part(len//2)
left = __FUNC__(left)
right = __FUNC__(right)
merge(left, right)
}
# Numeric sort
var nums = rand(1..100, 10)
say mergesort(nums)
# String sort
var strings = rand('a'..'z', 10)
say mergesort(strings)</syntaxhighlight>
=={{header|Standard ML}}==
<
| merge cmp (xs, []) = xs
| merge cmp (xs as x::xs', ys as y::ys') =
case cmp (x, y) of
| _ => x :: merge cmp (xs', ys)
fun merge_sort cmp [] = []
| merge_sort cmp [x] = [x]
Line 1,286 ⟶ 7,426:
in
merge cmp (merge_sort cmp ys, merge_sort cmp zs)
end</syntaxhighlight>
{{out|Poly/ML}}
<pre>
> merge_sort Int.compare [8,6,4,2,1,3,5,7,9];
val it = [1, 2, 3, 4, 5, 6, 7, 8, 9]: int list
> merge_sort String.compare ["Plum", "Pear", "Peach", "Each"];
val it = ["Each", "Peach", "Pear", "Plum"]: string list
>
</syntaxhighlight>
=={{header|Swift}}==
<syntaxhighlight lang="swift">// Merge Sort in Swift 4.2
// Source: https://github.com/raywenderlich/swift-algorithm-club/tree/master/Merge%20Sort
// NOTE: by use of generics you can make it sort arrays of any type that conforms to
// Comparable protocol, however this is not always optimal
import Foundation
func mergeSort(_ array: [Int]) -> [Int] {
guard array.count > 1 else { return array }
let middleIndex = array.count / 2
let leftPart = mergeSort(Array(array[0..<middleIndex]))
let rightPart = mergeSort(Array(array[middleIndex..<array.count]))
func merge(left: [Int], right: [Int]) -> [Int] {
var leftIndex = 0
var rightIndex = 0
var merged = [Int]()
merged.reserveCapacity(left.count + right.count)
while leftIndex < left.count && rightIndex < right.count {
if left[leftIndex] < right[rightIndex] {
merged.append(left[leftIndex])
leftIndex += 1
} else if left[leftIndex] > right[rightIndex] {
merged.append(right[rightIndex])
rightIndex += 1
} else {
merged.append(left[leftIndex])
leftIndex += 1
merged.append(right[rightIndex])
rightIndex += 1
}
}
while leftIndex < left.count {
merged.append(left[leftIndex])
leftIndex += 1
}
while rightIndex < right.count {
merged.append(right[rightIndex])
rightIndex += 1
}
return merged
}
return merge(left: leftPart, right: rightPart)
}</syntaxhighlight>
=={{header|Tailspin}}==
The standard recursive merge sort
<syntaxhighlight lang="tailspin">
templates mergesort
templates merge
@: $(2);
[ $(1)... -> #, $@...] !
when <?($@ <[](0)>)
| ..$@(1)> do
$ !
otherwise
^@(1) !
$ -> #
end merge
$ -> #
when <[](0..1)> do $!
otherwise
def half: $::length ~/ 2;
[$(1..$half) -> mergesort, $($half+1..last) -> mergesort] -> merge !
end mergesort
[4,5,3,8,1,2,6,7,9,8,5] -> mergesort -> !OUT::write
</syntaxhighlight>
{{out}}
<pre>
[1, 2, 3, 4, 5, 5, 6, 7, 8, 8, 9]
</pre>
A little different spin where the array is first split into a list of single-element lists and then merged.
<syntaxhighlight lang="tailspin">
templates mergesort
templates merge
@: $(2);
$(1)... -> \(
when <?($@merge<[](0)>)
| ..$@merge(1)> do
$ !
otherwise
^@merge(1) !
$ -> #
\) !
$@... !
end merge
templates mergePairs
when <[](1)> do
$(1) !
when <[](2..)> do
[$(1..2) -> merge] !
$(3..last) -> #
end mergePairs
templates mergeAll
when <[](0)> do
$ !
when <[](1)> do
$(1) !
otherwise
[ $ -> mergePairs ] -> #
end mergeAll
$ -> [ $... -> [ $ ] ] -> mergeAll !
end mergesort
[4,5,3,8,1,2,6,7,9,8,5] -> mergesort -> !OUT::write
</syntaxhighlight>
{{out}}
<pre>
[1, 2, 3, 4, 5, 5, 6, 7, 8, 8, 9]
</pre>
=={{header|Tcl}}==
<
proc mergesort m {
Line 1,323 ⟶ 7,596:
}
puts [mergesort {8 6 4 2 1 3 5 7 9}] ;# => 1 2 3 4 5 6 7 8 9</
Also note that Tcl's built-in <tt>lsort</tt> command uses the mergesort algorithm.
=={{header|Unison}}==
<syntaxhighlight lang="unison">mergeSortBy : (i ->{𝕖} i ->{𝕖} Boolean) ->{𝕖} [i] ->{𝕖} [i]
mergeSortBy cmp =
merge l1 l2 =
match (l1, l2) with
(xs, []) -> xs
([], ys) -> ys
(x +: xs, y +: ys) -> if cmp x y then x +: merge xs l2 else y +: merge l1 ys
([], []) -> []
cases
[] -> []
[x] -> [x]
lst ->
match halve lst with
(left, right) -> merge (mergeSortBy cmp left) (mergeSortBy cmp right)</syntaxhighlight>
=={{header|UnixPipes}}==
{{works with|Zsh}}
<syntaxhighlight lang="bash">split() {
(while read a b ; do
echo $a > $1 ; echo $b > $2
Line 1,344 ⟶ 7,632:
}
cat to.sort | mergesort</syntaxhighlight>
=={{header|Ursala}}==
<
mergesort "p" = @iNCS :-0 ~&B^?a\~&YaO "p"?abh/~&alh2faltPrXPRC ~&arh2falrtPXPRC
Line 1,354 ⟶ 7,641:
#show+
example = mergesort(lleq) <'zoh','zpb','hhh','egi','bff','cii','yid'></
{{out}}
<pre>
bff
Line 1,365 ⟶ 7,651:
zoh
zpb</pre>
The mergesort function could also have been defined using the built in sorting operator, -<, because the same algorithm is used.
<syntaxhighlight lang="ursala">mergesort "p" = "p"-<</syntaxhighlight>
=={{header|V}}==
merge uses the helper mergei to merge two lists. The mergei takes a stack of the form [mergedlist] [list1] [list2]
it then extracts one element from list2, splits the list1 with it, joins the older merged list, first part of list1 and the element that was used for splitting (taken from list2) into the new merged list. the new list1 is the second part of the split on older list1. new list2 is the list remaining after the element e2 was extracted from it.
<syntaxhighlight lang="v">[merge
[mergei
uncons [swap [>] split] dip
Line 1,392 ⟶ 7,674:
[splitarr]
[merge]
binrec].</
[8 7 6 5 4 2 1 3 9] msort puts
=={{header|V (Vlang)}}==
<syntaxhighlight lang="v (vlang)">fn main() {
mut a := [170, 45, 75, -90, -802, 24, 2, 66]
println("before: $a")
a = merge_sort(a)
println("after: $a")
}
fn merge_sort(m []int) []int {
if m.len <= 1{
return m
} else {
mid := m.len / 2
mut left := merge_sort(m[..mid])
mut right := merge_sort(m[mid..])
if m[mid-1] <= m[mid] {
left << right
return left
}
return merge(mut left, mut right)
}
}
fn merge(mut left []int,mut right []int) []int {
mut result := []int{}
for left.len > 0 && right.len > 0 {
if left[0] <= right[0]{
result << left[0]
left = left[1..]
} else {
result << right[0]
right = right[1..]
}
}
if left.len > 0 {
result << left
}
if right.len > 0 {
result << right
}
return result
}</syntaxhighlight>
=={{header|Wren}}==
<syntaxhighlight lang="wren">var merge = Fn.new { |left, right|
var result = []
while (left.count > 0 && right.count > 0) {
if (left[0] <= right[0]) {
result.add(left[0])
left = left[1..-1]
} else {
result.add(right[0])
right = right[1..-1]
}
}
if (left.count > 0) result.addAll(left)
if (right.count > 0) result.addAll(right)
return result
}
var mergeSort // recursive
mergeSort = Fn.new { |m|
var len = m.count
if (len <= 1) return m
var middle = (len/2).floor
var left = m[0...middle]
var right = m[middle..-1]
left = mergeSort.call(left)
right = mergeSort.call(right)
if (left[-1] <= right[0]) {
left.addAll(right)
return left
}
return merge.call(left, right)
}
var array = [ [4, 65, 2, -31, 0, 99, 2, 83, 782, 1], [7, 5, 2, 6, 1, 4, 2, 6, 3] ]
for (a in array) {
System.print("Before: %(a)")
a = mergeSort.call(a)
System.print("After : %(a)")
System.print()
}</syntaxhighlight>
{{out}}
<pre>
Before: [4, 65, 2, -31, 0, 99, 2, 83, 782, 1]
After : [-31, 0, 1, 2, 2, 4, 65, 83, 99, 782]
Before: [7, 5, 2, 6, 1, 4, 2, 6, 3]
After : [1, 2, 2, 3, 4, 5, 6, 6, 7]
</pre>
<br>
Alternatively we can just call a library method.
{{libheader|Wren-sort}}
<syntaxhighlight lang="wren">import "./sort" for Sort
var array = [ [4, 65, 2, -31, 0, 99, 2, 83, 782, 1], [7, 5, 2, 6, 1, 4, 2, 6, 3] ]
for (a in array) {
System.print("Before: %(a)")
a = Sort.merge(a)
System.print("After : %(a)")
System.print()
}</syntaxhighlight>
{{out}}
<pre>
As above.
</pre>
=={{header|XPL0}}==
This is based on an example in "Fundamentals of Computer Algorithms" by
Horowitz & Sahni.
<syntaxhighlight lang="xpl0">code Reserve=3, ChOut=8, IntOut=11;
proc MergeSort(A, Low, High); \Sort array A from Low to High
int A, Low, High;
int B, Mid, H, I, J, K;
[if Low >= High then return;
Mid:= (Low+High) >> 1; \split array in half (roughly)
MergeSort(A, Low, Mid); \sort left half
MergeSort(A, Mid+1, High); \sort right half
\Merge the two halves in to sorted order
B:= Reserve((High-Low+1)*4); \reserve space for working array (4 bytes/int)
H:= Low; I:= Low; J:= Mid+1;
while H<=Mid & J<=High do \merge while both halves have items
if A(H) <= A(J) then [B(I):= A(H); I:= I+1; H:= H+1]
else [B(I):= A(J); I:= I+1; J:= J+1];
if H > Mid then \copy any remaining elements
for K:= J to High do [B(I):= A(K); I:= I+1]
else for K:= H to Mid do [B(I):= A(K); I:= I+1];
for K:= Low to High do A(K):= B(K);
];
int A, I;
[A:= [3, 1, 4, 1, -5, 9, 2, 6, 5, 4];
MergeSort(A, 0, 10-1);
for I:= 0 to 10-1 do [IntOut(0, A(I)); ChOut(0, ^ )];
]</syntaxhighlight>
{{out}}
<pre>
-5 1 1 2 3 4 4 5 6 9
</pre>
{{omit from|GUISS}}
=={{header|Yabasic}}==
{{trans|FreeBASIC}}
<syntaxhighlight lang="yabasic">
dim b(9)
sub copyArray(a(), inicio, final, b())
dim b(final - 1)
for k = inicio to final - 1
b(k) = a(k)
next
end sub
// La mitad izquierda es a(inicio to mitad-1).
// La mitad derecha es a(mitad to final-1).
// El resultado es b(inicio to final-1).
sub topDownMerge(a(), inicio, mitad, final, b())
i = inicio
j = mitad
// Si bien hay elementos en los recorridos izquierdo o derecho ...
for k = inicio to final - 1
// Si existe un inicio de recorrido izquierdo y es <= inicio de recorrido derecho existente.
if (i < mitad) and (j >= final or a(i) <= a(j)) then
b(k) = a(i)
i = i + 1
else
b(k) = a(j)
j = j + 1
end if
next
end sub
// Ordenar la matriz a() usando la matriz b() como fuente.
// inicio es inclusivo; final es exclusivo (a(final) no está en el conjunto).
sub topDownSplitMerge(b(), inicio, final, a())
if (final - inicio) < 2 then return : fi // Si la diferencia = 1, considérelo ordenado
// dividir la ejecución de más de 1 elemento en mitades
mitad = int((final + inicio) / 2) // mitad = punto medio
// recursively sort both runs from array a() into b()
topDownSplitMerge(a(), inicio, mitad, b()) // ordenar la parte izquierda
topDownSplitMerge(a(), mitad, final, b()) // ordenar la parte derecha
// fusionar las ejecuciones resultantes de la matriz b() en a()
topDownMerge(b(), inicio, mitad, final, a())
end sub
// El array a() tiene los elementos para ordenar; array b() es una matriz de trabajo (inicialmente vacía).
sub topDownMergeSort(a(), b(), n)
copyArray(a(), 0, n, b()) // duplicar la matriz a() en b()
topDownSplitMerge(b(), 0, n, a()) // ordenar los datos de b() en a()
end sub
sub printArray(a())
for i = 1 to arraysize(a(),1)
print a(i) using "####";
next
print
end sub
//--------------------------
label a1
data 4, 65, 2, -31, 0, 99, 2, 83, 782, 1
label a2
data 7, 5, 2, 6, 1, 4, 2, 6, 3
dim a(9)
restore a1
for i = 0 to 9
read p
a(i) = p
next i
dim a2(8)
restore a2
for i = 0 to 8
read p
a2(i) = p
next i
print "unsort ";
printArray(a())
topDownMergeSort (a(), b(), 10)
print " sort ";
printArray(a())
print
print "unsort ";
printArray(a2())
topDownMergeSort (a2(), b(), 9)
print " sort ";
printArray(a2())
end
</syntaxhighlight>
=={{header|ZED}}==
Source -> http://ideone.com/uZEPL4
Compiled -> http://ideone.com/SJ5EGu
This is a bottom up version of merge sort:
<syntaxhighlight lang="zed">(append) list1 list2
comment:
#true
(003) "append" list1 list2
(car) pair
comment:
#true
(002) "car" pair
(cdr) pair
comment:
#true
(002) "cdr" pair
(cons) one two
comment:
#true
(003) "cons" one two
(map) function list
comment:
#true
(003) "map" function list
(merge) comparator list1 list2
comment:
#true
(merge1) comparator list1 list2 nil
(merge1) comparator list1 list2 collect
comment:
(null?) list2
(append) (reverse) collect list1
(merge1) comparator list1 list2 collect
comment:
(null?) list1
(append) (reverse) collect list2
(merge1) comparator list1 list2 collect
comment:
(003) comparator (car) list2 (car) list1
(merge1) comparator list1 (cdr) list2 (cons) (car) list2 collect
(merge1) comparator list1 list2 collect
comment:
#true
(merge1) comparator (cdr) list1 list2 (cons) (car) list1 collect
(null?) value
comment:
#true
(002) "null?" value
(reverse) list
comment:
#true
(002) "reverse" list
(sort) comparator jumble
comment:
#true
(car) (sort11) comparator (sort1) jumble
(sort1) jumble
comment:
#true
(map) "list" jumble
(sort11) comparator jumble
comment:
(null?) jumble
nil
(sort11) comparator jumble
comment:
(null?) (cdr) jumble
jumble
(sort11) comparator jumble
comment:
#true
(sort11) comparator
(cons) (merge) comparator (car) jumble (002) "cadr" jumble
(sort11) comparator (002) "cddr" jumble</syntaxhighlight>
=={{header|zkl}}==
Pretty wasteful memory wise, probably not suitable for large sorts.
{{trans|Clojure}}
<syntaxhighlight lang="zkl">fcn _merge(left,right){
if (not left) return(right);
if (not right) return(left);
l:=left[0]; r:=right[0];
if (l<=r) return(L(l).extend(self.fcn(left[1,*],right)));
else return(L(r).extend(self.fcn(left,right[1,*])));
}
fcn merge_sort(L){
if (L.len()<2) return(L);
n:=L.len()/2;
return(_merge(self.fcn(L[0,n]), self.fcn(L[n,*])));
}</syntaxhighlight>
<syntaxhighlight lang="zkl">merge_sort(T(1,3,5,7,9,8,6,4,2)).println();
merge_sort("big fjords vex quick waltz nymph").concat().println();</syntaxhighlight>
{{out}}
<pre>
L(1,2,3,4,5,6,7,8,9)
abcdefghiijklmnopqrstuvwxyz
</pre>
Or, for lists only:
<syntaxhighlight lang="zkl">fcn mergeSort(L){
if (L.len()<2) return(L.copy());
n:=L.len()/2;
self.fcn(L[0,n]).merge(self.fcn(L[n,*]));
}</syntaxhighlight>
<syntaxhighlight lang="zkl">mergeSort(T(1,3,5,7,9,8,6,4,2)).println();
mergeSort("big fjords vex quick waltz nymph".split("")).concat().println();</syntaxhighlight>
{{out}}
<pre>
L(1,2,3,4,5,6,7,8,9)
abcdefghiijklmnopqrstuvwxyz
</pre>
|