Executable library: Difference between revisions
m
→{{header|Wren}}: Minor tidy
(→{{header|Tcl}}: Added zkl) |
m (→{{header|Wren}}: Minor tidy) |
||
| (39 intermediate revisions by 21 users not shown) | |||
Line 1:
{{task}}
{{omit from|GUISS}}
{{omit from|Haskell}}
{{omit from|MATLAB}}
{{omit from|Maxima}}
{{omit from|Octave}}
{{omit from|R}}
{{omit from|SAS}}
{{omit from|Scilab}}
{{omit from|Stata}}
The general idea behind an executable library is to create a library
that when used as a library does one thing;
Line 37 ⟶ 42:
To overcome the first obstacle, we implement a very simplistic parameter passing mechanism in a package Parameter (''parameter.ads''): The global variable Parameter.X will hold the ingoing parameter, the other global variable Parameter.Y will take the return value. To overcome the second obstacle, we ensure that Parameter.X is 0 by default.
<
X: Natural := 0;
Y: Natural;
end Parameter;</
Now comes our parameterless procedure Hailstone (''hailstone.adb''). Note that we are
Line 46 ⟶ 51:
[[Hailstone sequence#Alternative method]] to perform the real computation.
<
procedure Hailstone is
Line 94 ⟶ 99:
end;
end if;
end Hailstone;</
If we compile this and run it, we get the following output:
Line 104 ⟶ 109:
that essentially repeats the parameter profile. As our procedure is actually parameterless, this specification is more than trivial.
<syntaxhighlight lang
Finally, we write another parameterless procedure (''hailstone_test.adb''), that will call the procedure Hailstone. Note that we '''must''' change the Parameter.X to a value > 0 before calling Hailstone, otherwise, Hailstone would act as if it where the main program.
<
procedure Hailstone_Test is
Line 142 ⟶ 147:
Ada.Text_IO.Put_Line("The first such sequence: Hailstone("
& Integer'Image(Sample) & " ).");
end Hailstone_Test;</
Compiling and running this gives the following output:
Line 156 ⟶ 161:
{{works with|AutoHotkey_L}}
First we create the library, hailstone.ahk:
<
SetBatchLines, -1
Line 183 ⟶ 188:
until n=1
return out
}</
Running this directly gives the output:
<pre>Length of hailstone 27: 112
Line 192 ⟶ 197:
Then we can create a file (test.ahk) that uses the library (note the #Include line):
<
#Include %A_ScriptDir%\hailstone.ahk
SetBatchLines -1
Line 208 ⟶ 213:
if (count > highestCount)
highestCount := count, highestN := length
MsgBox % "the most common length was " highestN "; it occurred " highestCount " times."</
Running this '''does not''' trigger the output of the hailstone.ahk,
instead it outputs this:
Line 222 ⟶ 227:
This must be saved as the file HAILSTONE.BBC.
It may be used as a library (see below) or executed directly.
<
PRINT "Sequence length for 27 is "; seqlen%
maxlen% = 0
Line 242 ⟶ 247:
L% += 1
ENDWHILE
= L% + 1</
{{out}}
<pre>
Line 252 ⟶ 257:
===Client===
This uses the above program as a library:
<
DIM freq%(351)
Line 269 ⟶ 274:
PRINT "The most common sequence length is " ; mostcommon%
PRINT "It occurs " ; max% " times"
END</
{{out}}
<pre>
Line 278 ⟶ 283:
=={{header|C}}==
Solution for Linux/GCC. First, header file hailstone.h:
<
#define HAILSTONE
Line 284 ⟶ 289:
void free_sequence(long *);
#endif/*HAILSTONE*/</
Then the lib source code hailstone.c (actual name doesn't matter):
<
#include <stdlib.h>
Line 329 ⟶ 334:
exit(0);
}</
A program to use the lib (I call it test.c):
<
#include "hailstone.h"
Line 350 ⟶ 355:
return 0;
}</
Building the lib: <code>gcc -Wall -W -fPIC -shared -o libhail.so hailstone.c -lc -Wl,-e,hail_main</code>
Line 366 ⟶ 371:
For a serious library the <code>libhail.so</code> would have been put into a system lib dir, but for now we'll just leave it in the same directory, so to run the program, we need to give additional hints to tell it where to find the lib: <code>LD_LIBRARY_PATH=. ./hailtest</code>
=={{header|Clojure}}==
In a project's source directory, you might have a subfolder named <code>rosetta_code</code> with two Clojure source files:
<pre>
.
├── clojure.jar
└── rosetta_code
├── frequent_hailstone_lengths.clj
└── hailstone_sequence.clj
</pre>
The file <code>hailstone_sequence.clj</code> is an executable library:
<syntaxhighlight lang="clojure">(ns rosetta-code.hailstone-sequence)
(defn next-in-hailstone
"Returns the next number in the Hailstone sequence that starts with x.
If x is less than 2, returns nil."
[x]
(when (> x 1)
(if (even? x)
(/ x 2)
(inc (* 3 x)))))
(defn hailstone-seq
"Returns a lazy Hailstone sequence starting with the number x."
[x]
(take-while some?
(iterate next-in-hailstone x)))
(defn -main [& args]
(let [h27 (hailstone-seq 27)]
(printf "The Hailstone sequence starting at 27 contains %s elements:\n%s ... %s.\n"
(count h27)
(vec (take 4 h27))
(vec (take-last 4 h27)))
(let [[number length] (apply max-key second
(map (fn [x] [x (count (hailstone-seq x))])
(range 100000)))]
(printf "The number %s has the longest Hailstone sequence under 100000, of length %s.\n"
number length))))</syntaxhighlight>
You can run it from the command line (<code>clojure.jar</code> is [https://clojure.org/community/downloads the jar that contains the Clojure language]):
<pre>$ java -cp clojure.jar clojure.main -m rosetta-code.hailstone-sequence
The Hailstone sequence starting at 27 contains 112 elements:
[27 82 41 124] ... [8 4 2 1].
The number 77031 has the longest Hailstone sequence under 100000, of length 351.
</pre>
You can also use its functions from other programs. The file <code>frequent_hailstone_lengths.clj</code>:
<syntaxhighlight lang="clojure">(ns rosetta-code.frequent-hailstone-lengths
(:require [rosetta-code.hailstone-sequence
:refer [hailstone-seq]]))
(defn -main [& args]
(let [frequencies (apply merge-with +
(for [x (range 1 100000)]
{(count (hailstone-seq x)) 1}))
[most-frequent-length frequency]
(apply max-key val (seq frequencies))]
(printf (str "The most frequent Hailstone sequence length for numbers under 100000 is %s,"
" with a frequency of %s.\n")
most-frequent-length frequency)))</syntaxhighlight>
You can run it from the command line:
<pre>$ java -cp clojure.jar clojure.main -m rosetta-code.frequent-hailstone-lengths
The most frequent Hailstone sequence length for numbers under 100000 is 72, with a frequency of 1467.</pre>
Clojure also supports ahead-of-time compilation to class files, and the standard packaging tools [https://leiningen.org/ Leiningen] and [http://boot-clj.com/ Boot] provide meta-commands to compile and package Clojure programs into stand-alone runnable jars. At this point, Clojure has more or less the same executable library story as Java (class files can be named as the main entry point, and they can be included by other classes that import them).
=={{header|Déjà Vu}}==
The library, named <code>hailstone.deja</code>:
<
swap [ over ]
while < 1 dup:
Line 405 ⟶ 473:
!print( "number: " to-str max ", length: " to-str maxlen )
else:
@hailstone</
The client:
<
local :counts {}
Line 420 ⟶ 488:
set :maxlen counts! k
!print( "Maximum length: " to-str maxlen )
</syntaxhighlight>
=={{header|Factor}}==
Line 427 ⟶ 495:
This vocabulary, ''rosetta.hailstone'', exports the word ''hailstone'', but also uses ''MAIN:'' to declare a main entry point.
<
USING: arrays io kernel math math.ranges prettyprint sequences vectors ;
IN: rosetta.hailstone
Line 457 ⟶ 525:
PRIVATE>
MAIN: main</
There are two ways to run this program:
Line 474 ⟶ 542:
Any other Factor program can also use ''rosetta.hailstone'' as a regular vocabulary. This program only uses the word ''hailstone'' from that vocabulary, and never calls the main entry point of ''rosetta.hailstone''.
<
USING: assocs kernel io math math.ranges prettyprint
rosetta.hailstone sequences ;
Line 500 ⟶ 568:
PRIVATE>
MAIN: main</
<pre>$ ./factor -run=rosetta.hailstone.length
Line 507 ⟶ 575:
Among Hailstone sequences from 1 <= n < 100000,
there are 72 sequences of length 1467.</pre>
=={{header|Go}}==
To be directly executable, a Go application must contain a package called 'main' which includes a main() function from which execution begins automatically. Any other application is regarded as a library.
However, a package can consist of not just one but several source code files contained in the same directory.
Consequently, Go can emulate an executable library by splitting package 'main' into two files:
1. A file including the library code which includes (say) a libMain() function but no main() function as such.
2. A file including a main() function which calls libMain().
If these two files are 'run' as a package, then they can mimic executing the library code directly.
To use the library from another executable application, all that is needed is to copy the first file to the application's directory and then 'run' the files as a package. Care would be needed to ensure that there are no name clashes in the 'combined' package.
Note that, although the 'go run' command may look like it's launching an interpreter, it does in fact build an application from the package files in a temporary directory and then executes it in a single step.
To complete the task, first create these two files in the 'modulino' directory:
<syntaxhighlight lang="go">// modulino.go
package main
import "fmt"
// Function borrowed from Hailstone sequence task.
// 1st arg is the number to generate the sequence for.
// 2nd arg is a slice to recycle, to reduce garbage.
func hailstone(n int, recycle []int) []int {
s := append(recycle[:0], n)
for n > 1 {
if n&1 == 0 {
n = n / 2
} else {
n = 3*n + 1
}
s = append(s, n)
}
return s
}
func libMain() {
seq := hailstone(27, nil)
fmt.Println("\nHailstone sequence for the number 27:")
fmt.Println(" has", len(seq), "elements")
fmt.Println(" starts with", seq[0:4])
fmt.Println(" ends with", seq[len(seq)-4:])
var longest, length int
for i := 1; i < 100000; i++ {
if le := len(hailstone(i, nil)); le > length {
longest = i
length = le
}
}
fmt.Printf("\n%d has the longest Hailstone sequence, its length being %d.\n", longest, length)
}</syntaxhighlight>
<syntaxhighlight lang="go">// modulino_main.go
package main
func main() {
libMain()
}</syntaxhighlight>
To emulate an executable library:
{{output}}
<pre>
$ go run modulino
Hailstone sequence for the number 27:
has 112 elements
starts with [27 82 41 124]
ends with [8 4 2 1]
77031 has the longest Hailstone sequence, its length being 351.
</pre>
Now create this file in the 'hailstone' directory:
<syntaxhighlight lang="go">// hailstone.go
package main
import "fmt"
func main() {
freq := make(map[int]int)
for i := 1; i < 100000; i++ {
freq[len(hailstone(i, nil))]++
}
var mk, mv int
for k, v := range freq {
if v > mv {
mk = k
mv = v
}
}
fmt.Printf("\nThe Hailstone length returned most is %d, which occurs %d times.\n", mk, mv)
}</syntaxhighlight>
and copy modulino.go to the 'hailstone' directory. The library can then be used in the 'normal' way:
{{output}}
<pre>
$ go run hailstone
The Hailstone length returned most is 72, which occurs 1467 times.
</pre>
=={{header|Io}}==
'''HailStone.io'''
<syntaxhighlight lang="io">HailStone := Object clone
HailStone sequence := method(n,
if(n < 1, Exception raise("hailstone: expect n >= 1 not #{n}" interpolate))
n = n floor // make sure integer value
stones := list(n)
while (n != 1,
n = if(n isEven, n/2, 3*n + 1)
stones append(n)
)
stones
)
if( isLaunchScript,
out := HailStone sequence(27)
writeln("hailstone(27) has length ",out size,": ",
out slice(0,4) join(" ")," ... ",out slice(-4) join(" "))
maxSize := 0
maxN := 0
for(n, 1, 100000-1,
out = HailStone sequence(n)
if(out size > maxSize,
maxSize = out size
maxN = n
)
)
writeln("For numbers < 100,000, ", maxN,
" has the longest sequence of ", maxSize, " elements.")
)</syntaxhighlight>
'''client.io'''
<syntaxhighlight lang="io">counts := Map clone
for(n, 1, 100000-1,
out := HailStone sequence(n)
key := out size asCharacter
counts atPut(key, counts atIfAbsentPut(key, 0) + 1)
)
maxCount := counts values max
lengths := list()
counts foreach(k,v,
if(v == maxCount, lengths append(k at(0)))
)
if(lengths size == 1,
writeln("The most frequent sequence length for n < 100,000 is ",lengths at(0),
" occurring ",maxCount," times.")
,
writeln("The most frequent sequence lengths for n < 100,000 are:\n",
lengths join(",")," occurring ",maxCount," times each.")
)</syntaxhighlight>
'''Terminal Session'''
<pre>$ io HailStone.io
hailstone(27) has length 112: 27 82 41 124 ... 8 4 2 1
For numbers < 100,000, 77031 has the longest sequence of 351 elements.
$ io client.io
The most frequent sequence length for n < 100,000 is 72 occurring 1467 times.
$</pre>
Io has a built-in auto importer that will attempt to automatically
import a file with the same name (plus "io" extension) as an undefined
prototype object when it is first referenced. To be imported the first letter of the
prototype name must also be upper case which by convention indicates a
prototype that has the same role as a class in class based object-oriented
languages. The Importer's default search path is the current working
directory, but you can add search paths using <code>Importer addSearchPath()</code>.
=={{header|J}}==
Line 512 ⟶ 756:
This is the executable library:
<syntaxhighlight lang="j">#!/usr/bin/ijconsole
hailseq=: -:`(1 3&p.)@.(2&|) ^:(1 ~: ]) ^:a:"0
9!:29]1
9!:27'main 0'
Line 522 ⟶ 767:
smoutput 'less than 100000 (and finding that sequence length):'
smoutput (I.@(= >./),>./) #@hailseq i.1e5
)</
Running it might look like this:
<
Hailstone sequence for the number 27
27 82 41 124 62 31 94 47 142 71 214 107 322 161 484 242 121 364 182 91 274 137 412 206 103 310 155 466 233 700 350 175 526 263 790 395 1186 593 1780 890 445 1336 668 334 167 502 251 754 377 1132 566 283 850 425 1276 638 319 958 479 1438 719 2158 1079 3238 ...
Finding number with longest hailstone sequence which is
less than 100000 (and finding that sequence length):
77031 351</
This is the program which uses the library part of that executable library:
<
9!:29]1
9!:27'main 0'
Line 543 ⟶ 788:
smoutput {:{.\:~ (#/.~,.~.) #@hailseq }.i.1e5
)
</syntaxhighlight>
Running it might look like this:
<
Finding most frequent hailstone sequence length for
Hailstone sequences for whole numbers less than 100000
72</
Notes: <code>9!:29]1</code> tells the interpeter to run a phrase. <code>9!:27'phrase'</code> tells the interpeter the phrase to execute. (<code>9!:</code> means, in essence: standard library number 9, and <code>9!:29</code> identifies a specific entry point in that library.)
In 66.ijs we can not use the presence of <code>9!:29]1</code> from <code>hailseq.ijs</code> because hailseq.ijs was loaded with require which means that if it had already been loaded it will not be loaded again.
(And, <code>66</code> here is just an arbitrary temporary file name.)
=={{header|Java}}==
Java files are compiled into bytecode class files. The CLASSPATH will specify the location of class files.
===Library===
<syntaxhighlight lang="java">
import java.util.ArrayList;
import java.util.List;
// task 1
public class HailstoneSequence {
public static void main(String[] args) {
// task 2
int n = 27;
List<Long> sequence27 = hailstoneSequence(n);
System.out.printf("Hailstone sequence for %d has a length of %d:%nhailstone(%d) = %s%n", n, sequence27.size(), n, sequence27);
// task 3
int maxN = 0;
int maxLength = 0;
for ( int i = 1 ; i < 100_000 ; i++ ) {
int seqLength = hailstoneSequence(i).size();
if ( seqLength > maxLength ) {
maxLength = seqLength;
maxN = i;
}
}
System.out.printf("Longest hailstone sequence less than 100,000: hailstone(%d).length() = %d", maxN, maxLength);
}
public static List<Long> hailstoneSequence(long n) {
if ( n <= 0 ) {
throw new IllegalArgumentException("Must be grater than or equal to zero.");
}
List<Long> sequence = new ArrayList<>();
sequence.add(n);
while ( n > 1 ) {
if ( (n & 1) == 0 ) {
n /= 2;
}
else {
n = 3 * n + 1;
}
sequence.add(n);
}
return sequence;
}
}
</syntaxhighlight>
{{out}}
<pre>
Hailstone sequence for 27 has a length of 112:
hailstone(27) = [27, 82, 41, 124, 62, 31, 94, 47, 142, 71, 214, 107, 322, 161, 484, 242, 121, 364, 182, 91, 274, 137, 412, 206, 103, 310, 155, 466, 233, 700, 350, 175, 526, 263, 790, 395, 1186, 593, 1780, 890, 445, 1336, 668, 334, 167, 502, 251, 754, 377, 1132, 566, 283, 850, 425, 1276, 638, 319, 958, 479, 1438, 719, 2158, 1079, 3238, 1619, 4858, 2429, 7288, 3644, 1822, 911, 2734, 1367, 4102, 2051, 6154, 3077, 9232, 4616, 2308, 1154, 577, 1732, 866, 433, 1300, 650, 325, 976, 488, 244, 122, 61, 184, 92, 46, 23, 70, 35, 106, 53, 160, 80, 40, 20, 10, 5, 16, 8, 4, 2, 1]
Longest hailstone sequence less than 100,000: hailstone(77031).length() = 351
</pre>
===Client===
<syntaxhighlight lang="java">
import java.util.HashMap;
import java.util.Map;
import java.util.stream.IntStream;
public class ExecutableLibrary {
public static void main(String[] args) {
Map<Integer,Integer> lengthMap = new HashMap<>();
IntStream.range(1, 100_000)
.map(n -> HailstoneSequence.hailstoneSequence(n).size())
.forEach(len -> lengthMap.merge(len, 1, (v1, v2) -> v1 + v2));
int mostOften = lengthMap.values()
.stream()
.mapToInt(x -> x)
.max().orElse(-1);
System.out.printf("The most frequent hailstone length for n < 100,000 is %d.%n", mostOften);
}
}
</syntaxhighlight>
{{out}}
<pre>
The most frequent hailstone length for n < 100,000 is 1467.
</pre>
=={{header|Julia}}==
A Julia module can check to see if it is also the file run from the command lime by checking the PROGRAM_NAME variable.
<syntaxhighlight lang="julia">
############### in file hailstone.jl ###############
module Hailstone
function hailstone(n)
ret = [n]
while n > 1
if n & 1 > 0
n = 3n + 1
else
n = Int(n//2)
end
append!(ret, n)
end
return ret
end
export hailstone
end
if PROGRAM_FILE == "hailstone.jl"
using Hailstone
h = hailstone(27)
n = length(h)
println("The sequence of hailstone(27) is:\n $h.\nThis sequence is of length $n. It starts with $(h[1:4]) and ends with $(h[n-3:end]).")
end
############ in file moduletest.jl ####################
include("hailstone.jl")
using Hailstone
function countstones(mi, mx)
lengths2occurences = Dict()
mostfreq = mi
maxcount = 1
for i in mi:mx
h = hailstone(i)
n = length(h)
if haskey(lengths2occurences, n)
newoccurences = lengths2occurences[n] + 1
if newoccurences > maxcount
maxcount = newoccurences
mostfreq = n
end
lengths2occurences[n] = newoccurences
else
lengths2occurences[n] = 1
end
end
mostfreq, maxcount
end
nlen, cnt = countstones(1,99999)
print("The most common hailstone sequence length for hailstone(n) for 1 <= n < 100000 is $nlen, which occurs $cnt times.")
</syntaxhighlight>
{{output}}<pre>
Running hailstone.jl standalone:
The sequence of hailstone(27) is:
[27, 82, 41, 124, 62, 31, 94, 47, 142, 71, 214, 107, 322, 161, 484, 242, 121, 364, 182, 91, 274, 137, 412, 206, 103, 310, 155, 466, 233, 700, 350, 175, 526, 263, 790, 395, 1186, 593, 1780, 890, 445, 1336, 668, 334, 167, 502, 251, 754, 377, 1132, 566, 283, 850, 425, 1276, 638, 319, 958, 479, 1438, 719, 2158, 1079, 3238, 1619, 4858, 2429, 7288, 3644, 1822, 911, 2734, 1367, 4102, 2051, 6154, 3077, 9232, 4616, 2308, 1154, 577, 1732, 866, 433, 1300, 650, 325, 976, 488, 244, 122, 61, 184, 92, 46, 23, 70, 35, 106, 53, 160, 80, 40, 20, 10, 5, 16, 8, 4, 2, 1].
This sequence is of length 112. It starts with [27, 82, 41, 124] and ends with [8, 4, 2, 1].
Running the program that uses the Hailstone module:
The most common hailstone sequence length for hailstone(n) for 1 <= n < 100000 is 72, which occurs 1467 times.
</pre>
=={{header|Limbo}}==
Line 563 ⟶ 960:
First, <code>execlib.b</code> looks like this:
<
include "sys.m"; sys: Sys;
Line 616 ⟶ 1,013:
return i :: hailstone(big 3 * i + big 1);
}
</syntaxhighlight>
And <code>execsexeclib.b</code> (which executes <code>execlib</code>) looks like this:
<
include "sys.m"; sys: Sys;
Line 665 ⟶ 1,062:
raise "fail:errors";
}
</syntaxhighlight>
{{out}}
Line 677 ⟶ 1,074:
The most common sequence length is 72 (encountered 1467 times)
</pre>
=={{header|Lua}}==
The library is called hailstone.lua:
<syntaxhighlight lang="lua">#!/usr/bin/env luajit
bit32=bit32 or bit
local lib={
hailstone=function(n)
local seq={n}
while n>1 do
n=bit32.band(n,1)==1 and 3*n+1 or n/2
seq[#seq+1]=n
end
return seq
end
}
if arg[0] and arg[0]:match("hailstone.lua") then
local function printf(fmt, ...) io.write(string.format(fmt, ...)) end
local seq=lib.hailstone(27)
printf("27 has %d numbers in sequence:\n",#seq)
for _,i in ipairs(seq) do
printf("%d ", i)
end
printf("\n")
else
return lib
end
</syntaxhighlight>
The executable is called hailtest.lua:
<syntaxhighlight lang="lua">#!/usr/bin/env luajit
local lib=require"hailstone"
local longest,longest_i=0,0
for i=1,1e5 do
local len=#lib.hailstone(i)
if len>longest then
longest_i=i
longest=len
end
end
print("Longest sequence at "..longest_i..", length "..longest)
</syntaxhighlight>
{{out}}
<pre>> ./hailstone.lua
27 has 112 numbers in sequence:
27 82 41 124 62 31 94 47 142 71 214 107 322 161 484 242 121 364 … 8 4 2 1
> ./hailtest.lua
Longest sequence at 77031, length 351
</pre>
=={{header|Mathematica}}/{{header|Wolfram Language}}==
===Library===
<syntaxhighlight lang="mathematica">hailstone[1] = {1};
hailstone[n_] :=
hailstone[n] = Prepend[hailstone[If[EvenQ[n], n/2, 3 n + 1]], n];
If[$ScriptCommandLine[[1]] == $Input,
val = hailstone[27];
Print["hailstone(27) starts with ", val[[;; 4]], ", ends with ",
val[[-4 ;;]], ", and has length ", Length[val], "."];
val = MaximalBy[Range[99999], Length@*hailstone][[1]];
Print[val, " has the longest hailstone sequence with length ",
Length[hailstone[val]], "."]];</syntaxhighlight>
{{out}}
<pre>hailstone(27) starts with {27, 82, 41, 124}, ends with {8, 4, 2, 1}, and has length 112.
77031 has the longest hailstone sequence with length 351.</pre>
===Client===
This assumes that the library is named <tt>hailstone.m</tt>.
<syntaxhighlight lang="mathematica"><< hailstone.m;
Print["The most common hailstone length is ",
Commonest[Length@*hailstone /@ Range[99999]][[1]], "."];</syntaxhighlight>
{{out}}
<pre>The most common hailstone length is 72.</pre>
=={{header|Nanoquery}}==
The global boolean value 'main' is true is the program is being executed directly and false if it is being imported as a library.
<syntaxhighlight lang="nanoquery">def hailstone(n)
seq = list()
while (n > 1)
append seq n
if (n % 2)=0
n = int(n / 2)
else
n = int((3 * n) + 1)
end
end
append seq n
return seq
end
if main
h = hailstone(27)
println "hailstone(27)"
println "total elements: " + len(hailstone(27))
print h[0] + ", " + h[1] + ", " + h[2] + ", " + h[3] + ", ..., "
println h[-4] + ", " + h[-3] + ", " + h[-2] + ", " + h[-1]
max = 0
maxLoc = 0
for i in range(1,99999)
result = len(hailstone(i))
if (result > max)
max = result
maxLoc = i
end
end
print "\nThe number less than 100,000 with the longest sequence is "
println maxLoc + " with a length of " + max
end</syntaxhighlight>
=={{header|NetRexx}}==
Line 700 ⟶ 1,208:
Using this JAR file as a library, the following program can use the <tt>hailstone(N)</tt> method to complete the task:
<
options replace format comments java crossref symbols nobinary
Line 735 ⟶ 1,243:
say 'The length of hailstone sequence that is most common in the range' beginNum '<= N <' endNum 'is' mostOftenNum'. It occurs' mostOftenCount 'times.'
return
</syntaxhighlight>
The program can then be launched with the <tt>java</tt> command. In this sample the JAR file is included via the <tt>-cp</tt> switch:
Line 743 ⟶ 1,251:
=={{header|Nim}}==
<
result = @[n]
var n = n
Line 757 ⟶ 1,265:
assert h.len == 112 and h[0..3] == @[27,82,41,124] and h[h.high-3..h.high] == @[8,4,2,1]
var m, mi = 0
for i in 1 ..
let n = hailstone(i).len
if n > m:
m = n
mi = i
echo "Maximum length ", m, " was found for hailstone(", mi, ") for numbers <100,000"</
In Nim the value <code>isMainModule</code> is set at compiletime, and we can use it with <code>when</code> (a compiletime if).
'''Library Importing Example'''
<
var t = initCountTable[int]()
for i in 1 ..
t.inc(hailstone(i).len)
let (val, cnt) = t.largest()
echo "The length of hailstone sequence that is most common for"
echo "hailstone(n) where 1<=n<100000, is ", val, ". It occurs ", cnt, " times."</
{{out}}
<pre>The length of hailstone sequence that is most common for
hailstone(n) where 1<=n<100000, is 72. It occurs 1467 times.</pre>
=={{header|PARI/GP}}==
Linux solution (i386 and x86_64).
Library file hailstone.c:
<syntaxhighlight lang="c">#include <pari/pari.h>
#define HAILSTONE1 "n=1;print1(%d,\": \");apply(x->while(x!=1,if(x/2==x\\2,x/=2,x=x*3+1);n++;print1(x,\", \")),%d);print(\"(\",n,\")\n\")"
#define HAILSTONE2 "m=n=0;for(i=2,%d,h=1;apply(x->while(x!=1,if(x/2==x\\2,x/=2,x=x*3+1);h++),i);if(m<h,m=h;n=i));print(n,\": \",m)"
void hailstone1(int x)
{
char buf[1024];
snprintf(buf, sizeof(buf), HAILSTONE1, x, x);
pari_init(1000000, 2);
geval(strtoGENstr(buf));
pari_close();
}
void hailstone2(int range)
{
char buf[1024];
snprintf(buf, sizeof(buf), HAILSTONE2, range);
pari_init(1000000, 2);
geval(strtoGENstr(buf));
pari_close();
}
#if __i386__
const char _hail[] __attribute__((section(".interp"))) = "/lib/ld-linux.so.2";
#else // __x86_64__
const char _hail[] __attribute__((section(".interp"))) = "/lib64/ld-linux-x86-64.so.2";
#endif
int main(void)
{
hailstone1(27);
hailstone2(100000);
exit(0);
}</syntaxhighlight>
Compile hailstone.c: ''gcc -O2 -Wall hailstone.c -fPIC -shared -o libhailstone.so -lpari -Wl,-e,main''
Execute library: ''./libhailstone.so'':
<pre>27: 82, 41, 124, 62, 31, 94, 47, 142, 71, 214, 107, 322, 161, 484, 242, 121, 364, 182, 91, 274, 137, 412, 206, 103, 310, 155, 466, 233, 700, 350, 175, 526, 263, 790, 395, 1186, 593, 1780, 890, 445, 1336, 668, 334, 167, 502, 251, 754, 377, 1132, 566, 283, 850, 425, 1276, 638, 319, 958, 479, 1438, 719, 2158, 1079, 3238, 1619, 4858, 2429, 7288, 3644, 1822, 911, 2734, 1367, 4102, 2051, 6154, 3077, 9232, 4616, 2308, 1154, 577, 1732, 866, 433, 1300, 650, 325, 976, 488, 244, 122, 61, 184, 92, 46, 23, 70, 35, 106, 53, 160, 80, 40, 20, 10, 5, 16, 8, 4, 2, 1, (112)
77031: 351</pre>
----
Main program linking libhailstone.so... main.c:
<syntaxhighlight lang="c">void hailstone1(int);
int main(void)
{
hailstone1(27);
return 0;
}</syntaxhighlight>
Compile main.c: ''gcc -O2 -Wall main.c -o main -L. libhailstone.so''
Execute main program: ''LD_LIBRARY_PATH=. ./main'' :
<pre>27: 82, 41, 124, 62, 31, 94, 47, 142, 71, 214, 107, 322, 161, 484, 242, 121, 364, 182, 91, 274, 137, 412, 206, 103, 310, 155, 466, 233, 700, 350, 175, 526, 263, 790, 395, 1186, 593, 1780, 890, 445, 1336, 668, 334, 167, 502, 251, 754, 377, 1132, 566, 283, 850, 425, 1276, 638, 319, 958, 479, 1438, 719, 2158, 1079, 3238, 1619, 4858, 2429, 7288, 3644, 1822, 911, 2734, 1367, 4102, 2051, 6154, 3077, 9232, 4616, 2308, 1154, 577, 1732, 866, 433, 1300, 650, 325, 976, 488, 244, 122, 61, 184, 92, 46, 23, 70, 35, 106, 53, 160, 80, 40, 20, 10, 5, 16, 8, 4, 2, 1, (112)</pre>
=={{header|Pascal}}==
{{works with|FPC}}
Library:
<syntaxhighlight lang="pascal">
uses
DynLibs;
type
THailSeq = record
Data: PCardinal;
Count: Longint;
end;
var
Buffer: array[0..511] of Cardinal;
function Hailstone(aValue: Cardinal): THailSeq;
var
I: Longint;
begin
Hailstone.Count := 0;
Hailstone.Data := nil;
if (aValue <> 0) and (aValue <= 200000) then begin
Buffer[0] := aValue;
I := 1;
repeat
if Odd(aValue) then
aValue := Succ((3 * aValue))
else
aValue := aValue div 2;
Buffer[I] := aValue;
Inc(I);
until aValue = 1;
Hailstone.Count := I;
Hailstone.Data := @Buffer;
end;
end;
procedure PrintArray(const Prefix: string; const a: array of Cardinal);
var
I: Longint;
begin
Write(Prefix, '[');
for I := 0 to High(a) - 1 do Write(a[I], ', ');
WriteLn(a[High(a)], ']');
end;
exports
Hailstone;
var
hs: THailSeq;
I, Value: Cardinal;
MaxLen: Longint;
begin
hs := Hailstone(27);
WriteLn('Length of Hailstone(27) is ', hs.Count, ',');
PrintArray('it starts with ', hs.Data[0..3]);
PrintArray('and ends with ', hs.Data[hs.Count-4..hs.Count-1]);
Value := 0;
MaxLen := 0;
for I := 1 to 100000 do begin
hs := Hailstone(I);
if hs.Count > MaxLen then begin
MaxLen := hs.Count;
Value := I;
end;
end;
WriteLn('Maximum length ', MaxLen, ' was found for Hailstone(', Value, ')');
end.
</syntaxhighlight>
build
<syntaxhighlight lang="shell">
Linux64: fpc <source file name> -Cg -k-pie -oexec_lib
Win64: fpc <source file name> -Cg -oexec_lib.exe
</syntaxhighlight>
when run as executable:
{{out}}
<pre>
Length of Hailstone(27) is 112,
it starts with [27, 82, 41, 124]
and ends with [8, 4, 2, 1]
Maximum length 351 was found for Hailstone(77031)
</pre>
Client:
<syntaxhighlight lang="pascal">
{$h+}
uses
SysUtils, DynLibs;
const
LIB_NAME = {$ifdef windows}'exec_lib.exe'{$else}'exec_lib'{$endif};
type
THailSeq = record
Data: PCardinal;
Count: Longint;
end;
THailstone = function(aValue: Cardinal): THailSeq;
TCounts = array[0..511] of Longint;
var
LibName: string;
hLib: TLibHandle;
Fun: THailstone;
I, Len, Count, c: Longint;
Counts: TCounts;
begin
LibName := ExtractFilePath(ParamStr(0))+LIB_NAME;
hLib := LoadLibrary(LibName);
if hLib = NilHandle then begin
WriteLn('Can not load library ', LibName); Halt(1);
end;
Pointer(Fun) := GetProcAddress(hLib, 'Hailstone');
if Pointer(Fun) = nil then begin
WriteLn('Can not find Hailstone() function'); Halt(2);
end;
Counts := Default(TCounts);
Count := 0;
Len := 0;
for I := 1 to 100000 do begin
c := Fun(I).Count;
Inc(Counts[c]);
if Counts[c] > Count then begin
Count := Counts[c];
Len := c;
end;
end;
UnloadLibrary(hLib);
WriteLn('The most common Hailstone sequence length in the specified range is ',
Len, ', it occurs ', Count, ' times.');
end.
</syntaxhighlight>
Both executables must be placed in the same folder.
{{out}}
<pre>
The most common Hailstone sequence length in the specified range is 72, it occurs 1467 times.
</pre>
=={{header|Perl}}==
Lib package in file <code>Hailstone.pm</code>:
<
sub seq {
Line 809 ⟶ 1,519:
}
1;</
Main program in file <code>test.pl</code>:<
use strict;
use warnings;
Line 820 ⟶ 1,530:
my ($most_frequent) = sort {$seqs{$b} <=> $seqs{$a}} keys %seqs;
print "Most frequent length: $most_frequent ($seqs{$most_frequent} occurrences)\n";</
Running the lib: <pre>% perl Hailstone.pm
seq of 27 - 112 elements: 27 82 41 124 62 31 94 47 142 ... 10 5 16 8 4 2 1
Line 827 ⟶ 1,537:
Most frequent length: 72 (1467 occurrences)</pre>
=={{header|
Simply test whether include_file() returns 1. hail.exw:
<syntaxhighlight lang="phix">--global (if you want to be able to call this from test.exw)
sequence s = {n}
if remainder(n,2)=0 then
n /= 2
else
n = 3*n+1
end if
s &= n
end while
return s
end function
global function hailstone_count(atom n)
integer count = 1
while n!=1 do
if remainder(n,2)=0 then
n /= 2
else
n = 3*n+1
end if
count += 1
end while
return count
end function
if include_file()==1 then
sequence s = hailstone(27)
integer ls = length(s)
s[5..-5] = {".."}
puts(1,"hailstone(27) = ")
? s
printf(1,"length = %d\n\n",ls)
integer hmax = 1, imax = 1,count
for i=2 to 1e5-1 do
count = hailstone_count(i)
if count>hmax then
hmax = count
imax = i
end if
end for
printf(1,"The longest hailstone sequence under 100,000 is %d with %d elements.\n",{imax,hmax})
end if</syntaxhighlight>
{{out}}
<pre>
hailstone(27) = {27,82,41,124,"..",8,4,2,1}
length = 112
The longest hailstone sequence under 100,000 is 77031 with 351 elements.
</pre>
test.exw:
<syntaxhighlight lang="phix">include hail.exw
sequence counts = {}
for i=1 to 100000 do
integer l = hailstone_count(i)
if length(counts)<l then
counts &= repeat(0,l-length(counts))
end if
counts[l] += 1
end for
printf(1,"The hailstone length returned most often between 1 and 100,000 is %d.\n",{largest(counts,1)})</syntaxhighlight>
{{out}}
<pre>
The hailstone length returned most often between 1 and 100,000 is 72.
</pre>
=={{header|PicoLisp}}==
There is no formal difference between libraries and other executable files
in PicoLisp.
Any function in a library can be called from the command line
by prefixing it with '-'.
Create an executable file (chmod +x) "hailstone.l":
<syntaxhighlight lang="picolisp">#!/usr/bin/picolisp /usr/lib/picolisp/lib.l
(de hailstone (N)
(make
(until (= 1 (link N))
(setq N
(if (bit? 1 N)
(inc (* N 3))
(/ N 2) ) ) ) ) )
(de hailtest ()
(let L (hailstone 27)
(test 112 (length L))
(test (27 82 41 124) (head 4 L))
(test (8 4 2 1) (tail 4 L)) )
(let N (maxi '((N) (length (hailstone N))) (range 1 100000))
(test 77031 N)
(test 351 (length (hailstone N))) )
(println 'OK)
(bye) )</syntaxhighlight>
and an executable file (chmod +x) "test.l":
<syntaxhighlight lang="picolisp">#!/usr/bin/picolisp /usr/lib/picolisp/lib.l
(load "hailstone.l")
(let Len NIL
(for N 100000
(accu 'Len (length (hailstone N)) 1) )
(let M (maxi cdr Len)
(prinl "The hailstone length returned most often is " (car M))
(prinl "It is returned " (cdr M) " times") ) )
(bye)</syntaxhighlight>
Test:
<pre>$ ./hailstone.l -hailtest
OK
$ ./test.l
The hailstone length returned most often is 72
It is returned 1467 times</pre>
=={{header|Pike}}==
Line 864 ⟶ 1,666:
both can be used as an executable.
<
int next(int n)
Line 902 ⟶ 1,704:
}
write("longest sequence starting at %d has %d elements\n", longest->start, longest->length);
}</
if run directly we get:
Line 912 ⟶ 1,714:
note that the . in .HailStone only signifies calling a class or module from the current directory.
the analyze function is identical in both examples:
<
{
.HailStone HailStone = .HailStone();
Line 936 ⟶ 1,738:
}
write("most common length %d appears %d times\n", max->length, max->count);
}</
a module is already instantiated so we can use it directly.
like above the initial . in .Hailstone.hailstone only signifies the current directory, the second . is a member reference resolved at compile time.
<
{
mapping long = ([]);
Line 962 ⟶ 1,764:
}
write("most common length %d appears %d times\n", max->length, max->count);
}</
{{out}} for both examples:
Line 968 ⟶ 1,770:
most common length 72 appears 1467 times
</pre>
=={{header|Python}}==
Line 1,019 ⟶ 1,775:
The entry is copied below and, for this task needs to be in a file called <code>hailstone.py</code>:
<
seq = [n]
while n>1:
Line 1,030 ⟶ 1,786:
assert len(h)==112 and h[:4]==[27, 82, 41, 124] and h[-4:]==[8, 4, 2, 1]
print("Maximum length %i was found for hailstone(%i) for numbers <100,000" %
max((len(hailstone(i)), i) for i in range(1,100000)))</
In the case of the Python language the interpreter maintains a module level variable called __name__. If the file hailstone.py is ''imported'' (as <code>import hailstone</code>), then the __name__ variable is set to the import name of 'hailstone' and the <code>if __name__ == '__main__'</code> expression would then be false, and only the hailstone function is available to the importer.
Line 1,039 ⟶ 1,795:
The second executable is the file <code>common_hailstone_length.py</code> with this content:
<
def function_length_frequency(func, hrange):
Line 1,051 ⟶ 1,807:
print("The length of hailstone sequence that is most common for\n"
"hailstone(n) where 1<=n<%i, is %i. It occurs %i times."
% (upto, hlen, freq))</
Both files could be in the same directory. (That is the easiest way to make the library known to its importer for this example)
Line 1,082 ⟶ 1,838:
function is now provided, and the demonstration printout is pushed into a
<tt>main</tt> submodule:
<syntaxhighlight lang="racket">
#lang racket
Line 1,104 ⟶ 1,860:
(printf "for x<=~s, ~s has the longest sequence with ~s items\n"
N (car longest) (cdr longest)))
</syntaxhighlight>
Running it directly produces the same output as [[Hailstone sequence#Racket]]:
Line 1,116 ⟶ 1,872:
And now this can be used from a second source file, "<tt>hsfreq.rkt</tt>" as a
library:
<syntaxhighlight lang="racket">
#lang racket
(require "hs.rkt")
Line 1,129 ⟶ 1,885:
(printf "Most frequent sequence length for x<=~s: ~s, appearing ~s times\n" N
(cdr best) (car best))
</syntaxhighlight>
<pre>
Line 1,135 ⟶ 1,891:
Most frequent sequence length for x<=100000: 72, appearing 1467 times
</pre>
=={{header|Raku}}==
(formerly Perl 6)
The library can be written as a module:
<syntaxhighlight lang="raku" line>module Hailstone {
our sub hailstone($n) is export {
$n, { $_ %% 2 ?? $_ div 2 !! $_ * 3 + 1 } ... 1
}
}
sub MAIN {
say "hailstone(27) = {.[^4]} [...] {.[*-4 .. *-1]}" given Hailstone::hailstone 27;
}</syntaxhighlight>
It can be run with:
<syntaxhighlight lang="shell">$ raku Hailstone.rakumod</syntaxhighlight>
{{out}}
<pre>hailstone(27) = 27 82 41 124 [...] 8 4 2 1</pre>
It can then be used with a program such as:
<syntaxhighlight lang="raku" line>use Hailstone;
my %score;
(1 .. 100_000).race.map: { %score{hailstone($_).elems}++ };
say "Most common length is {.key}, occurring {.value} times." given max :by(*.value), %score;</syntaxhighlight>
Called with a command line as:
<pre>$ RAKULIB=. raku test-hailstone.raku</pre>
The environment variable RAKULIB might be necessary if the file Hailstone.rakumod is not in the standard library path for Raku.
=={{header|REXX}}==
Line 1,147 ⟶ 1,932:
<br>The following program (function) is named: '''HAILSTONE.REX''' (the case doesn't matter for Microsoft Windows systems).
<br>All REXX interpreters support subroutines/functions being on the current drive ('''CD'''), default disk (or MDISK in the case of CMS), or the equivalent.
<
numeric digits 20 /*ensure enough digits for mult. */
parse arg n 1 s /*N & S assigned to the first arg*/
Line 1,155 ⟶ 1,940:
s=s n /*build a sequence list (append).*/
end /*while*/
return s</
===task 2, 3===
The following program is named: : '''HAIL_PGM.REX''' and is stored in the current directory.
<
parse arg x .; if x=='' then x=27 /*get the optional first argument*/
Line 1,174 ⟶ 1,959:
say '(between 1──►99,999) ' bigJ 'has the longest hailstone sequence:' w
/*stick a fork in it, we're done.*/</
{{out}}
<pre>
Line 1,184 ⟶ 1,969:
===task 4===
The following program is named: '''HAIL_POP.REX''' and is stored in the current directory.
<
parse arg z .; if z=='' then z=99999 /*get the optional first argument*/
!.=0
Line 1,198 ⟶ 1,983:
say '(between 1──►'z") " p,
' is the most common hailstone sequence length (with' occ "occurrences)."
/*stick a fork in it, we're done.*/</
{{out}}
<pre>
Line 1,230 ⟶ 2,015:
{{works with|Ruby|1.8.7}}
<
module Hailstone
module_function
Line 1,255 ⟶ 2,040:
puts "#{n} has a hailstone sequence length of #{len}"
puts "the largest number in that sequence is #{hailstone(n).max}"
end</
{{out|It runs like any Ruby program}}
Line 1,265 ⟶ 2,050:
This is ''hsfreq.rb'', which requires ''hailstone.rb'' as a library.
<
require 'hailstone'
Line 1,275 ⟶ 2,060:
puts "Given the hailstone sequences from 1 to #{last},"
puts "the most common sequence length is #{length},"
puts "with #{count} such sequences."</
As with any library, ''hailstone.rb'' must be in <code>$:</code>, the search path for libraries.
Line 1,290 ⟶ 2,075:
In Scala it is possible to combine several "main"s
(mixed-in by the App trait) in one file (e.g. HailstoneSequence.scala):
<syntaxhighlight lang="scala">
object HailstoneSequence extends App { // Show it all, default number is 27.
def hailstone(n: Int): LazyList[Int] =
n #:: (if (n == 1) LazyList.empty else hailstone(if (n % 2 == 0) n / 2 else n * 3 + 1))
Hailstone.details(args.headOption.map(_.toInt).getOrElse(27))
Line 1,299 ⟶ 2,085:
object Hailstone extends App { // Compute a given or default number to Hailstone sequence
def details(nr: Int): Unit = {
val collatz = HailstoneSequence.hailstone(nr)
Line 1,306 ⟶ 2,092:
println(s"It has ${collatz.length} elements.")
}
details(args.headOption.map(_.toInt).getOrElse(27))
}
Line 1,314 ⟶ 2,101:
val (n, len) = (1 until 100000).map(n => (n, HailstoneSequence.hailstone(n).length)).maxBy(_._2)
println(s"Longest hailstone sequence length= $len occurring with number $n.")
}
</syntaxhighlight>
Steps:
Line 1,343 ⟶ 2,131:
C:\Users\FransAdm\Documents></pre>
=={{header|Sidef}}==
Library saved as '''Hailstone.sm'''
<syntaxhighlight lang="ruby">func hailstone(n) {
gather {
while (n > 1) {
take(n)
n = (n.is_even ? (n/2) : (take(3*n + 1)/2))
}
take(1)
}
}
if (__FILE__ == __MAIN__) { # true when not imported
var seq = hailstone(27)
say "hailstone(27) - #{seq.len} elements: #{seq.first(4)} [...] #{seq.last(4)}"
var n = 0
var max = 0
100_000.times { |i|
var seq = hailstone(i)
if (seq.len > max) {
max = seq.len
n = i
}
}
say "Longest sequence is for #{n}: #{max}"
}</syntaxhighlight>
It can be run with:
<syntaxhighlight lang="shell">$ sidef Hailstone.sm</syntaxhighlight>
It can then be used with a program such as:
<syntaxhighlight lang="ruby">include Hailstone
var score = Hash()
100_000.times { |i| score{ Hailstone::hailstone(i).len } := 0 ++ }
var k = score.keys.max_by {|k| score{k} }
say "Most common length is #{k}, occurring #{score{k}} times"</syntaxhighlight>
Called with a command line as:
<syntaxhighlight lang="shell">$ sidef test_hailstone.sf</syntaxhighlight>
The library is searched in the directories specified in the '''SIDEF_INC''' environment variable, which defaults to the current directory.
=={{header|Tcl}}==
The standard idiom for detecting whether a script is being loaded as a library or run directly is to compare the result of <code>info script</code> (which describes the name of the currently sourced script file) and the global <code>argv0</code> variable (which holds the name of the main script).
<
package provide hailstone 1.0
Line 1,370 ⟶ 2,204:
}
puts "max is $max, with length $maxlen"
}</
To make the package locatable, run this Tcl script
in the same directory which builds the index file:
<syntaxhighlight lang
Using the above code as a library then just requires that we tell the script the location of the additional library directory by adding it to the global <code>auto_path</code> variable; it is unnecessary if the script is installed in one of the standard locations (a fairly long list that depends on the installation):
<
package require Tcl 8.6 ;# For [lsort -stride] option
lappend auto_path . ;# Or wherever it is located
Line 1,392 ⟶ 2,226:
lassign $sortedHist mostCommonLength freq
puts "most common length is $mostCommonLength, with frequency $freq"</
=={{header|Wren}}==
In Wren there is no essential difference between the ''main module'' (the module at which the script starts executing) and any ''library module'' which it imports. The latter can also contain executable code and, if it does, it will execute when the library module is imported.
To treat a library module as ''dual purpose'' we therefore need a way to stop its executable code from running when it is being used as a pure library but to let it run otherwise.
The strategy here is check whether the main module is the same as the library module and to treat is as executable if it is but as a library otherwise.
<syntaxhighlight lang="wren">/* Executable_library.wren */
var Hailstone = Fn.new { |n|
if (n < 1) Fiber.abort("Parameter must be a positive integer.")
var h = [n]
while (n != 1) {
n = (n%2 == 0) ? (n/2).floor : 3*n + 1
h.add(n)
}
return h
}
var libMain_ = Fn.new {
var h = Hailstone.call(27)
System.print("For the Hailstone sequence starting with n = 27:")
System.print(" Number of elements = %(h.count)")
System.print(" First four elements = %(h[0..3])")
System.print(" Final four elements = %(h[-4..-1])")
System.print("\nThe Hailstone sequence for n < 100,000 with the longest length is:")
var longest = 0
var longlen = 0
for (n in 1..99999) {
var h = Hailstone.call(n)
var c = h.count
if (c > longlen) {
longest = n
longlen = c
}
}
System.print(" Longest = %(longest)")
System.print(" Length = %(longlen)")
}
// Check if it's being used as a library or not.
import "os" for Process
if (Process.allArguments[1] == "Executable_library.wren") { // if true, not a library
libMain_.call()
}</syntaxhighlight>
{{out}}
If we run this directly, we get the expected output:
<pre>
$ wren Executable_library.wren
For the Hailstone sequence starting with n = 27:
Number of elements = 112
First four elements = [27, 82, 41, 124]
Final four elements = [8, 4, 2, 1]
The Hailstone sequence for n < 100,000 with the longest length is:
Longest = 77031
Length = 351
</pre>
If we now create a second module which imports the above and calls its Hailstone function:
<syntaxhighlight lang="wren">/* Executable_library_2.wren */
import "./Executable_library" for Hailstone
var freq = {}
for (i in 1...100000) {
var len = Hailstone.call(i).count
var f = freq[len]
freq[len] = f ? f + 1 : 1
}
var mk = 0
var mv = 0
for (k in freq.keys) {
var v = freq[k]
if (v > mv) {
mk = k
mv = v
}
}
System.print("The Hailstone length returned most is %(mk), which occurs %(mv) times.")</syntaxhighlight>
{{out}}
We can now run this to check that the executable code in hailstone.wren has been suppressed, giving us:
<pre>
$ wren Executable_library_2.wren
The Hailstone length returned most is 72, which occurs 1467 times.
</pre>
=={{header|zkl}}==
Line 1,398 ⟶ 2,325:
File hailstone.zkl:
<
if(n.isEven) return(self.fcn(n/2,z)); return(self.fcn(n*3+1,z)) }
Line 1,409 ⟶ 2,336:
fcn(c,n){ // if new longest sequence, save length/C, return longest
if(c.len()>n[0]) n.clear(c.len(),c[0]); n}.fp1(L(0,0)))
.println();</
File hailstone2.zkl:
<syntaxhighlight lang="zkl">#!/home/craigd/Bin/zkl
collatz:=Import("hailstone",False,False,False).collatz; // don't run constructor
d:=Dictionary();
[2..0d100_000].pump(Void, // loop n from 2 to 100,000
Line 1,421 ⟶ 2,349:
mostFreqLen:=d.filter1('wrap([(k,v)]){ v==longest })[0];
println("Most frequent length: %d; %d sequences of that length."
.fmt(mostFreqLen,longest));</
{{out}}
<pre>
Line 1,428 ⟶ 2,356:
L(351,77031)
$
Number of different lengths: 314
Most frequent length: 72; 1467 sequences of that length.
| |||