Character codes: Difference between revisions

[[Category:Basic language learning]]

[[Category:String manipulation]]

[[Category:Simple]]

 

 

Conversely, given a code, print out the corresponding character.

<br><br>

=={{header|11l}}==

print(Char(code' 97)) // prints "a"</syntaxhighlight>

=={{header|360 Assembly}}==

S/360 architecture and EBCDIC was born together.

In EBCDIC, the character 'a' (lowercase letter A) has a code of 129 in decimal and '81'x in hexadecimal.

To perform conversion, we use IC (insert character) and STC (store character) opcodes.

CHARCODE CSECT

USING CHARCODE,R13 base register

The printing routine only understands ASCII characters as codes anyway, so the "given a code produce its character" part is trivial.

The <code>PrintChar</code> routine is omitted for brevity. It converts the two cursor variables to a FIX layer address and outputs the character using the NEOGEO's FIX layer (the layer where text is displayed). Characters are stored in ROM and arranged in ASCII order.

 

MOVE.B #'A',D1

rts</syntaxhighlight>

Output can be seen [https://ibb.co/ngtDXpq here.]

=={{header|AArch64 Assembly}}==

{{works with|as|Raspberry Pi 3B version Buster 64 bits}}

/* ARM assembly AARCH64 Raspberry PI 3B */

/* program character64.s */

.include "../includeARM64.inc"

</syntaxhighlight>

=={{header|ABAP}}==

In ABAP you must first cast the character to a byte field and back to a number in order to get its ASCII value.

data: c value 'A', n type i.

field-symbols <n> type x.

write: c, '=', n left-justified.</syntaxhighlight>

{{Out}}<pre>A = 65</pre>

=={{header|ACL2}}==

Similar to Common Lisp:

(cw "~x0" (code-char 97))</syntaxhighlight>

=={{header|Action!}}==

CHAR c=['a]

BYTE b=[97]

97=a

</pre>

=={{header|ActionScript}}==

In ActionScript, you cannot take the character code of a character directly. Instead you must create a string and call charCodeAt with the character's position in the string as a parameter.

trace("a".charCodeAt(0));//prints '97'</syntaxhighlight>

=={{header|Ada}}==

 

procedure Char_Code is

{{out}}

<pre>a = 97</pre>

=={{header|Aime}}==

o_integer('a');

o_byte('\n');

o_byte(97);

o_byte('\n');</syntaxhighlight>

=={{header|ALGOL 68}}==

In ALGOL 68 the '''format''' $g$ is type aware, hence the type conversion operators '''abs''' & '''repr''' are used to set the type.

printf(($gl$, ABS "a")); # for ASCII this prints "+97" EBCDIC prints "+129" #

printf(($gl$, REPR 97)) # for ASCII this prints "a"; EBCDIC prints "/" #

a foreign tape is mounted, the characters will be converted transparently as the tape's

records are read.

INT errno = open(tape, "/dev/tape1", stand out channel)

make conv(tape, ebcdic conv);

using the ''stand conv'' query routine and then the conversion applied to a particular

file/tape. eg.

=={{header|ALGOL W}}==

% display the character code of "a" (97 in ASCII) %

write( decode( "a" ) );

write( code( 97 ) );

end.</syntaxhighlight>

=={{header|APL}}==

{{works with|Dyalog APL}}

{{works with|GNU APL}}

In GNU APL and Dyalog, <tt>⎕UCS</tt> with an integer returns the corresponding Unicode character:

a</syntaxhighlight>

and <tt>⎕UCS</tt> with a character returns the corresponding code:

97</syntaxhighlight>

Like most things in APL, <tt>⎕UCS</tt> can also be used with an array or with a string (which is an array of characters):

APL

⎕UCS 'Hello, world!'

72 101 108 108 111 44 32 119 111 114 108 100 33</syntaxhighlight>

=={{header|AppleScript}}==

log(id of "aA")</syntaxhighlight>

{{out}}

The converse instruction is <tt>character id</tt> — or either of its synonyms <tt>string id</tt> and <tt>Unicode text id</tt>. Because of a bug admitted to in Apple's AppleScript Language Guide, the expression <tt>text id</tt>, which one might expect to work, can't be used.

 

--> "a"

 

Unicode text id {72, 101, 108, 108, 111, 33}

--> "Hello!"</syntaxhighlight>

=={{header|ARM Assembly}}==

{{works with|as|Raspberry Pi}}

/* ARM assembly Raspberry PI */

/* program character.s */

 

</syntaxhighlight>

=={{header|Arturo}}==

 

print to :integer `a`

print to :char 97</syntaxhighlight>

97

a</pre>

=={{header|AutoHotkey}}==

MsgBox % Asc("a")</syntaxhighlight>

=={{header|AWK}}==

AWK has no built-in way to convert a character into ASCII (or whatever) code;

but a function that does so can be easily built using an associative array (where the keys are the characters).

The opposite can be done using <tt>printf</tt> (or <tt>sprintf</tt>) with <tt>%c</tt>

{

return chmap[c]

print s

}</syntaxhighlight>

=={{header|Axe}}==

Disp 97▶Char,i</syntaxhighlight>

=={{header|Babel}}==

 

{%d nl <<} eachar</syntaxhighlight>

 

</pre>

 

</syntaxhighlight>

{{out}}

babel

=={{header|BASIC}}==

{{works with|QuickBasic|4.5}}

char = "a"

PRINT CHR$(charCode) 'prints a

On the ZX Spectrum string variable names must be a single letter but numeric variables can be multiple characters:

{{works with|ZX Spectrum Basic}}

20 LET d$ = "b": REM d$ holds the character

30 PRINT CHR$(c): REM this prints a

==={{header|Applesoft BASIC}}===

CHR$(97) is used in place of "a" because on the older model Apple II, lower case is difficult to input.

{{Out}}<pre>a=97</pre>

 

 

==={{header|BaCon}}===

c$ = "$"

PRINT c$, ": ", ASC(c$)

==={{header|Commodore BASIC}}===

Commodore BASIC uses PETSCII code for its character set.

20 D$ = "B": REM D$ HOLDS THE CHARACTER 'B'

30 PRINT CHR$(CH): REM THIS PRINTS 'A'

 

==={{header|IS-BASIC}}===

110 PRINT CHR$(65)</syntaxhighlight>

 

{{works with|FreeBASIC}}

{{works with|Run BASIC}}

PRINT "98 -> "; CHR$(98)</syntaxhighlight>

 

==={{header|Sinclair ZX81 BASIC}}===

20 REM WHICH DOES NOT INCLUDE LOWER-CASE LETTERS

30 PRINT CODE "A"

 

==={{header|True BASIC}}===

PRINT "98 -> "; chr$(98)

END</syntaxhighlight>

 

==={{header|Yabasic}}===

print "98 -> ", chr$(98)</syntaxhighlight>

=={{header|BASIC256}}==

charCode = 97

char$ = "a"

π

960</pre>

=={{header|Batch File}}==

@echo off

 

a

</pre>

=={{header|BBC BASIC}}==

char$ = "a"

PRINT CHR$(charCode) : REM prints a

PRINT ASC(char$) : REM prints 97</syntaxhighlight>

=={{header|Befunge}}==

The instruction <tt>.</tt> will output as an integer. <tt>,</tt> will output as ASCII character.

=={{header|BQN}}==

BQN's character arithmetic makes it easy to convert between numbers and characters. Since arithmetic generalizes to arrays, the same function works for both integers and arrays. Here, only the conversion from number to character is defined, since it can be automatically inverted with Undo (<code>⁼</code>): the inverse simply subtracts <code>@</code>.

 

@⊸+

FromCharCode 97

FromCharCode⁼ 'a'

97</syntaxhighlight>

=={{header|Bracmat}}==

$ ( str

$ ( "\nLatin a

UTF-8: 97 = a

Cyrillic а (UTF-8): 1072 = а</pre>

=={{header|C}}==

<tt>char</tt> is already an integer type in C, and it gets automatically promoted to <tt>int</tt>. So you can use a character where you would otherwise use an integer. Conversely, you can use an integer where you would normally use a character, except you may need to cast it, as <tt>char</tt> is smaller.

 

 

int main() {

return 0;

}</syntaxhighlight>

=={{header|C sharp|C#}}==

C# represents strings and characters internally as Unicode,

so casting a char to an int returns its Unicode character encoding.

 

namespace RosettaCode.CharacterCode

}

}</syntaxhighlight>

=={{header|C++}}==

<tt>char</tt> is already an integer type in C++, and it gets automatically promoted to <tt>int</tt>. So you can use a character where you would otherwise use an integer. Conversely, you can use an integer where you would normally use a character, except you may need to cast it, as <tt>char</tt> is smaller.

 

In this case, the output operator <tt><<</tt> is overloaded to handle integer (outputs the decimal representation) and character (outputs just the character) types differently, so we need to cast it in both cases.

 

int main() {

return 0;

}</syntaxhighlight>

=={{header|Clojure}}==

(print (char 97)) ; prints \a

 

(print (.codePointAt "𝅘𝅥𝅮" 0)) ; prints 119136

(print (String. (int-array 1 119136) 0 1)) ; prints 𝅘𝅥𝅮</syntaxhighlight>

=={{header|CLU}}==

po: stream := stream$primary_output()

<pre>97

a</pre>

=={{header|COBOL}}==

Tested with GnuCOBOL on an ASCII based GNU/Linux system.

Running this code on EBCDIC native hardware would display a control code and 000000093.

program-id. character-codes.

remarks. COBOL is an ordinal language, first is 1.

)

000000043</pre>

=={{header|CoffeeScript}}==

CoffeeScript transcompiles to JavaScript, so it uses the JS standard library.

console.log String.fromCharCode 97 # a</syntaxhighlight>

=={{header|Common Lisp}}==

(princ (code-char 97)) ; prints "a"</syntaxhighlight>

=={{header|Component Pascal}}==

BlackBox Component Builder

VAR

c : CHAR;

<pre>A:> 65

Ω:> 937</pre>

=={{header|D}}==

import std.stdio, std.utf;

 

{{out}}

<pre>97</pre>

=={{header|Dc}}==

A dc program cannot look into strings. But it can convert numeric values into single char strings or print numeric codes directly:

{{out}}

<pre>a</pre>

=={{header|Delphi}}==

Example from Studio 2006.

 

{$APPTYPE CONSOLE}

Readln;

end.</syntaxhighlight>

=={{header|Dyalect}}==

print(Char(97))</syntaxhighlight>

=={{header|E}}==

# value: 97

 

? <import:java.lang.makeCharacter>.asChar(97)

# value: 'a'</syntaxhighlight>

=={{header|EasyLang}}==

print strchar 97</syntaxhighlight>

=={{header|Eiffel}}==

All characters are of the type CHARACTER_8 (ASCII encoding) or CHARACTER_32 (Unicode encoding). CHARACTER is a synonym for either of these two (depending on the compiler option). Characters can be assigned using character literals (a single character enclosed in single quotes) or code value notation (of the form '%/value/' where value is an integer literal of any of the recognized forms).

class

APPLICATION

 

Limitations: There is no "put_character_32" feature for standard io (FILE class), so there appears to be no way to print Unicode characters.

=={{header|Elena}}==

ELENA 4.x :

 

public program()

97

</pre>

=={{header|Elixir}}==

A String in Elixir is a UTF-8 encoded binary.

97

iex(2)> to_string([code])

"a"</syntaxhighlight>

=={{header|Emacs Lisp}}==

(format "%c" 97) ;=> "a"</syntaxhighlight>

=={{header|Erlang}}==

In Erlang, lists and strings are the same, only the representation changes. Thus:

#Fun<erl_eval.6.13229925>

2> F("a").

97</syntaxhighlight>

If entered manually, one can also get ASCII codes by prefixing characters with <tt>$</tt>:

97</syntaxhighlight>

Unicode is fully supported since release R13A only.

=={{header|Euphoria}}==

printf(1,"%s\n", 97) -- prints "a"</syntaxhighlight>

=={{header|F Sharp|F#}}==

let n = 65

printfn "%d" (int c)

{{Out}}<pre>65

A</pre>

=={{header|Factor}}==

"ア" first .

 

12450 1string print</syntaxhighlight>

=={{header|FALSE}}==

"65,</syntaxhighlight>

=={{header|Fantom}}==

A character is represented in single quotes: the 'toInt' method returns the code for the character. The 'toChar' method converts an integer into its respective character.

a

fansh> 'a'.toInt

97</syntaxhighlight>

=={{header|Forth}}==

As with C, characters are just integers on the stack which are treated as ASCII.

dup . \ 97

emit \ a</syntaxhighlight>

=={{header|Fortran}}==

Functions ACHAR and IACHAR specifically work with the ASCII character set, while the results of CHAR and ICHAR will depend on the default character set being used.

WRITE(*,*) CHAR(97), ICHAR("a")</syntaxhighlight>

=={{header|Free Pascal}}==

''See [[#Pascal|Pascal]]''

=={{header|FreeBASIC}}==

' FreeBASIC v1.05.0 win64

Print "a - > "; Asc("a")

98 -> b

</pre>

=={{header|Frink}}==

The function <code>char[x]</code> in Frink returns the numerical Unicode codepoints for a string or character, or returns the Unicode string for an integer value or array of integer values. The <code>chars[x]</code> returns an array even if the string is a single character. These functions also correctly handle upper-plane Unicode characters as a single codepoint.

println[chars["a"]] // prints [97] (an array)

println[char[97]] // prints a

println[char["Frink rules!"]] // prints [70, 114, 105, 110, 107, 32, 114, 117, 108, 101, 115, 33]

println[[70, 114, 105, 110, 107, 32, 114, 117, 108, 101, 115, 33]] // prints "Frink rules!"</syntaxhighlight>

=={{header|Gambas}}==

Dim sChar As String

 

ASCII code 35 represents #

</pre>

=={{header|GAP}}==

CharInt(65);

# 'A'

IntChar('Z');

# 90</syntaxhighlight>

=={{header|Go}}==

In Go, a character literal ''is'' simply an integer constant of the character code:

fmt.Println('π') // prints "960"</syntaxhighlight>

 

import (

The variable and constant types most commonly used for character data are <code>byte</code>, <code>rune</code>, and <code>string</code>.

This example program shows character codes (as literals) stored in typed variables, and printed out with default formatting. Note that since byte and rune are integer types, the default formatting is a printable base 10 number. String is not numeric, and a little extra work must be done to print the character codes.

 

import "fmt"

</pre>

For the second part of the task, printing the character of a given code, the <code>%c</code> verb of <code>fmt.Printf</code> will do this directly from integer values, emitting the UTF-8 encoding of the code, (which will typically print the character depending on your hardware and operating system configuration).

r := rune(960)

fmt.Printf("%c %c\n%c %c\n", 97, 960, b, r)</syntaxhighlight>

 

Examples showing strings constructed from integer constants and then printed:

fmt.Println(string(960)) // prints "π"

fmt.Println(string([]rune{97, 960})) // prints "aπ"</syntaxhighlight>

=={{header|Golfscript}}==

To convert a number to a string, we use the array to string coercion.

To convert a string to a number, we have a many options, of which the simplest and shortest are:

'a'(\;p

'a'0=p

'a'{}/p</syntaxhighlight>

=={{header|Groovy}}==

Groovy does not have a character literal at all, so one-character strings have to be ''coerced'' to '''char'''. Groovy '''printf''' (like Java, but unlike C) is ''not type-agnostic'', so the cast or coercion from '''char''' to '''int''' is also required. The reverse direction is considerably simpler.

printf ("%c\n", 97)</syntaxhighlight>

{{Out}}

<pre>97

a</pre>

=={{header|Haskell}}==

 

main = do

print (ord 'π') -- prints "960"

print (chr 960) -- prints "'\960'"</syntaxhighlight>

=={{header|HicEst}}==

=={{header|HolyC}}==

Print("%c\n", 97); /* prints "a" */</syntaxhighlight>

=={{header|Hoon}}==

++ enc

|= char=@t `@ud`char

|= code=@ud `@t`code

--</syntaxhighlight>

=={{header|i}}==

print(number('a'))

print(text([97]))

}</syntaxhighlight>

=={{header|Icon}} and {{header|Unicon}}==

if *arglist > 0 then L := arglist else L := [97, "a"]

 

{{Out}}<pre>97 ==> a

a ==> 97</pre>

=={{header|Io}}==

Here character is a sequence (string) of length one.

97 asCharacter println // --> a

 

"π" at(0) println // --> 960

960 asCharacter println // --> π</syntaxhighlight>

=={{header|J}}==

abc☺

 

<code>7 u:</code> converts from utf-8, <code>3 u:</code> by itself would give us:

 

97 98 99 226 152 186</syntaxhighlight>

 

Also, if we limit ourselves to ascii, we have other ways of accomplishing the same thing. <code>a.</code> is a list of the 8 bit character codes and we can index from it, or search it (though that's mostly a notational convenience, since the underlying type already gives us all we need to know).

 

abc

a.i.'abc'

97 98 99</syntaxhighlight>

=={{header|Java}}==

<tt>char</tt> is already an integer type in Java, and it gets automatically promoted to <tt>int</tt>. So you can use a character where you would otherwise use an integer. Conversely, you can use an integer where you would normally use a character, except you may need to cast it, as <tt>char</tt> is smaller.

 

In this case, the <tt>println</tt> method is overloaded to handle integer (outputs the decimal representation) and character (outputs just the character) types differently, so we need to cast it in both cases.

public static void main(String[] args) {

System.out.println((int)'a'); // prints "97"

}</syntaxhighlight>

Java characters support Unicode:

public static void main(String[] args) {

System.out.println((int)'π'); // prints "960"

}

}</syntaxhighlight>

=={{header|JavaScript}}==

Here character is just a string of length 1

console.log(String.fromCharCode(97)); // prints "a"</syntaxhighlight>

 

in addition to the usual 2-byte unicode characters.

 

 

{{Out}}

 

 

and

 

return String.fromCodePoint(x);

})</syntaxhighlight>

{{Out}}

 

=={{header|Joy}}==

97 chr.</syntaxhighlight>

=={{header|jq}}==

jq data strings are JSON strings, which can be "explode"d into an array of integers, each representing a Unicode codepoint. The inverse of the <tt>explode</tt> filter is <tt>implode</tt>. <tt>explode</tt> can of course be used for single-character strings, and so for example:

[97] | implode # => "a"</syntaxhighlight>

Here is a filter which can be used to convert an integer to the corresponding

</syntaxhighlight>

Example:

1024 | chr # => "Ѐ"

=={{header|Julia}}==

Julia character constants (of type <code>Char</code>) are treated as an integer type representing the Unicode codepoint of the character, and can easily be converted to and from other integer types.

 

println(Char(97))</syntaxhighlight>

 

{{out}}<pre>97

a</pre>

=={{header|K}}==

97 98 99 65 66 67

 

_ci 97 98 99 65 66 67

"abcABC"</syntaxhighlight>

=={{header|Kotlin}}==

var c = 'a'

var i = c.toInt()

99 <-> c

</pre>

=={{header|LabVIEW}}==

{{VI snippet}}<br/>

[[File:LabVIEW_Character_codes.png]]

=={{header|Lang5}}==

'\\ comb -1 remove append "]^_`abcdefghijklmnopqrstuvwxyz{|}~" comb append ;

: CODE 95 iota 33 + ; : comb "" split ;

'a ord . # 97

97 chr . # a</syntaxhighlight>

=={{header|langur}}==

Langur has code point literals (enclosed in straight single quotes), which may use escape codes. They are integers.

The s2cp() and cp2s() functions convert between code point integers and strings. Also, string indexing is by code point.

 

val .a2 = 97

val .a3 = "a"[1]

letters: a, a, a, a, aaaa

</pre>

=={{header|Lasso}}==

'A'->integer

97->bytes

a

A</pre>

=={{header|LFE}}==

In LFE/Erlang, lists and strings are the same, only the representation changes. For example:

"Don't Panic."</syntaxhighlight>

 

As for this exercise, here's how you could print out the ASCII code for a letter, and a letter from the ASCII code:

97

ok

"a"

ok</syntaxhighlight>

=={{header|Liberty BASIC}}==

char$ = "a"

print chr$(charCode) 'prints a

print asc(char$) 'prints 97</syntaxhighlight>

=={{header|LIL}}==

LIL does not handle NUL bytes in character strings, char 0 returns an empty string.

print [codeat "a" 0]</syntaxhighlight>

 

<pre>a

97</pre>

=={{header|Lingo}}==

put chartonum("a")

-- 97

put numtochar(934)

-- Φ</syntaxhighlight>

=={{header|Little}}==

printf("The code 241 in Unicode is the letter: %c.\n", 241);

</syntaxhighlight>

=={{header|LiveCode}}==

put charToNum("") && numToChar(240)</syntaxhighlight>

=={{header|Logo}}==

Logo characters are words of length 1.

print char 97 ; a</syntaxhighlight>

=={{header|Logtalk}}==

a

Char = a

yes</syntaxhighlight>

97

Code = 97

yes</syntaxhighlight>

=={{header|Lua}}==

print(string.char(97)) -- prints "a"</syntaxhighlight>

=={{header|M2000 Interpreter}}==

\\ ANSI

Print Asc("a")

\\ 97 98 99 100

</syntaxhighlight>

=={{header|Maple}}==

There are two ways to do this in Maple. First, there are procedures in StringTools for this purpose.

65

 

</syntaxhighlight>

Second, the procedure convert handles conversions to and from byte values.

[65]

 

"A"

</syntaxhighlight>

=={{header|Mathematica}} / {{header|Wolfram Language}}==

Use the FromCharacterCode and ToCharacterCode functions:

FromCharacterCode[{97}]</syntaxhighlight>

{{Out}}<pre>{97, 98, 99, 100}

 

"a"</pre>

=={{header|MATLAB}} / {{header|Octave}}==

There are two built-in function that perform these tasks.

To convert from a number to a character use:

 

To convert from a character to its corresponding ascii character use:

 

or if you need this number as an integer not a double use:

asciiNumber = uint32(character)

asciiNumber = uint64(character)</syntaxhighlight>

 

Sample Usage:

 

ans =

 

87</syntaxhighlight>

=={{header|Maxima}}==

"A"

 

cint("A");

65</syntaxhighlight>

=={{header|Metafont}}==

Metafont handles only ''ASCII'' (even though codes beyond 127 can be given and used as real ASCII codes)

string a;

a := readstring;

message char hex"c3" & char hex"a8"; % since C3 A8 is the UTF-8 encoding for "è"

end</syntaxhighlight>

=={{header|Microsoft Small Basic}}==

TextWindow.WriteLine("The character for '65' is: " + Text.GetCharacter(65) + ".")</syntaxhighlight>

 

{{out}}

The character for '65' is: A.

Press any key to continue...</syntaxhighlight>

=={{header|Modula-2}}==

 

IMPORT InOut;

END asc.</syntaxhighlight>

{{out}}

a 97 1</syntaxhighlight>

=={{header|Modula-3}}==

The built in functions <code>ORD</code> and <code>VAL</code> work on characters, among other things.

VAL(97, CHAR); (* Returns 'a' *)</syntaxhighlight>

=={{header|MUMPS}}==

WRITE $CHAR(77)</syntaxhighlight>

=={{header|Nanoquery}}==

println chr(97)

 

960

π</pre>

=={{header|Neko}}==

Neko treats strings as an array of bytes

 

var s = "a";

var c = 98;

Neko also has standard primitives for handling the byte array as UTF-8

 

// native strings are just arrays of bytes

var us = "¥·£·€·$·¢·₡·₢·₣·₤·₥·₦·₧·₨·₩·₪·₫·₭·₮·₯·₹";

<pre>UFT-8 code for '€': 8364

UTF-8 code 8356: ₤</pre>

=={{header|NESL}}==

In NESL, character literals are prefixed with a backtick. The functions <tt>char_code</tt> and <tt>code_char</tt> convert between characters and integer character codes.

 

it = 97 : int</syntaxhighlight>

 

it = `a : char</syntaxhighlight>

=={{header|NetRexx}}==

NetRexx provides built-in functions to convert between character and decimal/hexadecimal.

options replace format comments java crossref symbols nobinary

 

32| '₴' 8372 20B4 '₴' '₴'

33| '₵' 8373 20B5 '₵' '₵'</pre>

=={{header|Nim}}==

echo chr(97) # echoes a

 

echo int("π".runeAt(0)) # echoes 960

echo Rune(960) # echoes π</syntaxhighlight>

=={{header|NS-HUBASIC}}==

NS-HUBASIC uses a non-ASCII character set that doesn't include letters in lowercase.

20 PRINT CHR$(38)</syntaxhighlight>

{{Out}}

<pre> 0A

&</pre>

=={{header|Oberon-2}}==

IMPORT Out;

VAR

97

a</pre>

=={{header|Objeck}}==

97->As(Char)->PrintLine();</syntaxhighlight>

=={{header|Object Pascal}}==

''See [[#Pascal|Pascal]]''

=={{header|OCaml}}==

Printf.printf "%c\n" (char_of_int 97); (* prints "a" *)</syntaxhighlight>

 

The following are aliases for the above functions:

- : char -> int = <fun>

# Char.chr;;

- : int -> char = <fun></syntaxhighlight>

=={{header|Oforth}}==

 

Oforth has not type or class for characters. A character is an integer which value is its unicode code.

 

 

{{out}}

97

</pre>

=={{header|OpenEdge/Progress}}==

CHR(97) SKIP

ASC("a")

VIEW-AS ALERT-BOX.</syntaxhighlight>

=={{header|Oz}}==

Characters in Oz are the same as integers in the range 0-255 (ISO 8859-1 encoding). To print a number as a character, we need to use it as a string (i.e. a list of integers from 0 to 255):

{System.showInfo [97]} %% prints "a"</syntaxhighlight>

=={{header|PARI/GP}}==

print(Strchr([72, 101, 108, 108, 111, 44, 32, 119, 111, 114, 108, 100, 33]))</syntaxhighlight>

=={{header|Pascal}}==

writeln(chr(97));</syntaxhighlight>

=={{header|Perl}}==

===Narrow===

The code is straightforward when characters are all narrow (single byte).

use warnings;

use utf8;

===Wide===

Have to work a little harder to handle wide (multi-byte) characters.

use warnings;

use feature 'say';

UTF-8: f0 9f 91 a8 e2 80 8d f0 9f 91 a9 e2 80 8d f0 9f 91 a7 e2 80 8d f0 9f 91 a6

Round trip: 👨‍👩‍👧‍👦</pre>

=={{header|Phix}}==

{{libheader|Phix/basics}}

Characters and their ascii codes are one and the same. (See also printf, %d / %s / %c.)

 

<span style="color: #0000FF;">?<span style="color: #008000;">'A'</span>

<span style="color: #7060A8;">puts<span style="color: #0000FF;">(<span style="color: #000000;">1<span style="color: #0000FF;">,<span style="color: #000000;">65<span style="color: #0000FF;">)

A

</pre>

=={{header|Phixmonti}}==

97 tochar print</syntaxhighlight>

=={{header|PHP}}==

Here character is just a string of length 1

echo chr(97), "\n"; // prints "a"</syntaxhighlight>

=={{header|Picat}}==

println(chr(97)),

println(ord('a')),

97

97</pre>

=={{header|PicoLisp}}==

-> 97

: (char "字")

: (mapcar char @)

-> (25991 23383)</syntaxhighlight>

=={{header|PL/I}}==

2 c character (1),

2 i fixed binary (8) unsigned;

c = 'a'; put skip list (i); /* prints 97 */

i = 97; put skip list (c); /* prints 'a' */</syntaxhighlight>

=={{header|PowerShell}}==

Powershell does allow for character literals with [convert]

 

PowerShell does not allow for character literals directly, so to get a character one first needs to convert a single-character string to a char:

Then a simple cast to int yields the character code:

This also works with Unicode:

For converting an integral character code into the actual character, a cast to char suffices:

[char] 9786 # ☺</syntaxhighlight>

=={{header|Prolog}}==

SWI-Prolog has predefined predicate char_code/2.

?- char_code(X, 97).

X = a.</pre>

=={{header|PureBasic}}==

PureBasic allows compiling code so that it will use either Ascii or a Unicode (UCS-2) encoding for representing its string content.

A one-character string is used here to hold the character and a numerical character type is used to hold the character code.

The character type is either one or two bytes in size, depending on whether compiling for Ascii or Unicode respectively.

;Results are the same when compiled for Ascii or Unicode

charCode.c = 97

 

This version should be compiled with Unicode setting and the source code to be encoded using UTF-8.

;UTF-8 encoding compiled for Unicode (UCS-2)

charCode.c = 960

CloseConsole()

EndIf</syntaxhighlight>

=={{header|Python}}==

{{works with|Python|2.x}}

 

8-bit characters:

print chr(97) # prints "a"</syntaxhighlight>

 

Unicode characters:

print unichr(960) # prints "π"</syntaxhighlight>

 

{{works with|Python|3.x}}

Here character is just a string of length 1

print(ord('π')) # prints "960"

print(chr(97)) # prints "a" (will also work in 2.x)

print(chr(960)) # prints "π"</syntaxhighlight>

=={{header|Quackery}}==

 

a

Stack empty.</pre>

=={{header|R}}==

text <- rawToChar(as.raw(ascii)); text</syntaxhighlight>

=={{header|Racket}}==

 

(define (code ch)

(char 97)

(char 955)</syntaxhighlight>

=={{header|Raku}}==

(formerly Perl 6)

Both Perl 5 and Raku have good Unicode support, though Raku attempts to make working with Unicode effortless. Note that even multi-byte emoji and characters outside the BMP are considered single characters. Also note: all of these routines are built into the base compiler. No need to load external libraries. See [[wp:Unicode_character_property#General_Category|Wikipedia: Unicode character properties]] for explanation of Unicode property.

.put for

[ 'Character',

Round trip by name: 👨‍👩‍👧‍👦

Round trip by ordinal: 👨‍👩‍👧‍👦</pre>

=={{header|RapidQ}}==

Print Chr$(97)

Print Asc("a")

</syntaxhighlight>

=={{header|Red}}==

print to-integer first "a" ;; -> 97

print to-integer #"a" ;; -> 97

print to-char 97 ;; -> a

</syntaxhighlight>

=={{header|Retro}}==

=={{header|REXX}}==

REXX supports handling of characters with built-in functions (BIFs), whether it be hexadecimal, binary (bits), or decimal code(s).

===ASCII===

yyy= 'c' /*assign a lowercase c to YYY. */

yyy= "c" /* (same as above) */

 

===EBCDIC===

yyy='c' /*assign a lowercase c to YYY */

yyy='83'x /*assign hexadecimal 83 to YYY */

129

10000001</pre>

=={{header|Ring}}==

see ascii("a") + nl

see char(97) + nl

</syntaxhighlight>

=={{header|Ruby}}==

In Ruby 1.9 characters are represented as length-1 strings; same as in Python. The previous "character literal" syntax <tt>?a</tt> is now the same as <tt>"a"</tt>. Subscripting a string also gives a length-1 string. There is now an "ord" method of strings to convert a character into its integer code.

 

=> 97

> 97.chr

=> "a"</syntaxhighlight>

=={{header|Run BASIC}}==

print asc("a") 'prints 97</syntaxhighlight>

=={{header|Rust}}==

 

fn main() {

960

π</pre>

=={{header|Sather}}==

main is

#OUT + 'a'.int + "\n"; -- or

end;

end;</syntaxhighlight>

=={{header|Scala}}==

{{libheader|Scala}}

Scala supports unicode characters, but each character is UTF-16, so there is not a 1-to-1 relationship for supplementary character sets.

===In a REPL session===

res2: Int = 97

 

===Full swing workout===

Taken the supplemental character sets in account.

 

object CharacterCode extends App {

65: 𠀀 "\uD840\uDC00" U+20000 (131072) NN HIGH SURROGATES D840

66: 𪚥 "\uD869\uDEA5" U+2A6A5 (173733) NN HIGH SURROGATES D869</pre>[http://illegalargumentexception.blogspot.nl/2009/05/java-rough-guide-to-character-encoding.html More background info: "Java: a rough guide to character encoding"]

=={{header|Scheme}}==

(display (integer->char 97)) (newline) ; prints "a"</syntaxhighlight>

=={{header|Seed7}}==

writeln(chr(97));</syntaxhighlight>

=={{header|SenseTalk}}==

put NumToChar(97)</syntaxhighlight>

=={{header|SequenceL}}==

SequenceL natively supports ASCII characters.<br>

'''SequenceL Interpreter Session:'''

97

cmd:>intToAscii(97)

'a'</syntaxhighlight>

=={{header|Sidef}}==

say 97.chr; # => 'a'</syntaxhighlight>

=={{header|Slate}}==

97 as: String Character.</syntaxhighlight>

=={{header|Smalltalk}}==

(Character value: 97) displayNl. "output a"</syntaxhighlight>

 

{{works with|Smalltalk/X}}

Ansi Smalltalk defines <tt>codePoint</tt>

Transcript showCR:(Character codePoint:97).

Transcript showCR:(98 asCharacter).

120097

120098</pre>

=={{header|SmileBASIC}}==

PRINT ASC("a") '97</syntaxhighlight>

=={{header|SNOBOL4}}==

Snobol implementations may or may not have built-in char( ) and ord ( ) or asc( ).

These are based on examples in the Snobol4+ tutorial and work with the native (1-byte) charset.

chr &alphabet tab(n) len(1) . chr :s(return)f(freturn)

chr_end

A

65</pre>

=={{header|SPL}}==

In SPL all characters are used in UTF-16LE encoding.

#.output("a -> ",x[1]," ",x[2])

x = [98,0]

98 0 -> b

</pre>

=={{header|Standard ML}}==

print (Char.toString (chr 97) ^ "\n"); (* prints "a" *)</syntaxhighlight>

=={{header|Stata}}==

The Mata '''ascii''' function transforms a string into a numeric vector of UTF-8 bytes. For instance:

 

1 2

+-------------+

ASCII characters are mapped to single bytes:

 

1 2 3 4 5 6 7 8 9 10 11 12 13

+-------------------------------------------------------------------------------+

Conversely, the '''char''' function transforms a byte vector into a string:

 

I stand here</syntaxhighlight>

=={{header|Swift}}==

The type that represent a Unicode code point is <code>UnicodeScalar</code>.

You can initialize it with a string literal:

println(c1.value) // prints "97"

let c2: UnicodeScalar = "π"

println(c2.value) // prints "960"</syntaxhighlight>

Or, you can get it by iterating a string's unicode scalars view:

for c in s1.unicodeScalars {

println(c.value) // prints "97"

 

You can also initialize it from a <code>UInt32</code> integer:

println(UnicodeScalar(i1)) // prints "a"

let i2: UInt32 = 960

println(UnicodeScalar(i2)) // prints "π"</syntaxhighlight>

=={{header|Tailspin}}==

Tailspin works with Unicode codepoints

'abc' -> $::asCodePoints -> !OUT::write

'$#10;' -> !OUT::write

a

</pre>

=={{header|Tcl}}==

puts [scan "a" %c] ;# ==> 97

puts [format %c 97] ;# ==> a

puts [scan "π" %c] ;# ==> 960

puts [format %c 960] ;# ==> π</syntaxhighlight>

=={{header|TI-83 BASIC}}==

TI-83 BASIC provides no built in way to do this, so in all String<-->List routines and anything else which requires character codes, a workaround using inString( and sub( is used.

In this example, the code of 'A' is displayed, and then the character matching a user-defined code is displayed.

Disp inString(Str1,"A

Input "CODE? ",A

Disp sub(Str1,A,1</syntaxhighlight>

=={{header|TI-89 BASIC}}==

The TI-89 uses an 8-bit charset/encoding which is similar to ISO-8859-1, but with more mathematical symbols and Greek letters.

The below program will display the character and code for any key pressed. Some keys do not correspond to characters and have codes greater than 255.

The portion of the program actually implementing the task is marked with a line of “©”s.

Local k, s

ClrIO

EndLoop

EndPrgm</syntaxhighlight>

=={{header|Trith}}==

Characters are Unicode code points, so the solution is the same for Unicode characters as it is for ASCII characters:

97 chr print</syntaxhighlight>

960 chr print</syntaxhighlight>

=={{header|TUSCRIPT}}==

SET character ="a", code=DECODE (character,byte)

PRINT character,"=",code</syntaxhighlight>

{{Out}}<pre>a=97</pre>

=={{header|uBasic/4tH}}==

uBasic/4tH is an integer BASIC, just like Tiny BASIC. However, the function ORD() is supported, just as CHR(). The latter is only allowed within a PRINT statement.

=={{header|UNIX Shell}}==

Aamrun$ printf "%d\n" \'a

97

Aamrun$

</syntaxhighlight>

=={{header|Ursa}}==

out (ord "a") endl console

# outputs the character 'a' given its value

out (chr 97) endl console</syntaxhighlight>

=={{header|Ursala}}==

Character code functions are not built in but easily defined as reifications of

the character table.

#import nat

 

test = (chr97,asc`a)</syntaxhighlight>

{{Out}}<pre>(`a,97)</pre>

=={{header|VBA}}==

Debug.Print [Code("a")] ' Prints 97</syntaxhighlight>

=={{header|VBScript}}==

'prints a

WScript.StdOut.WriteLine Chr(97)

WScript.StdOut.WriteLine Asc("a")

</syntaxhighlight>

=={{header|Vim Script}}==

The behavior of the two functions depends on the value of the option <code>encoding</code>.

echo char2nr("a")

"Prints 97

echo nr2char(97)

"Prints a</syntaxhighlight>

=={{header|Visual Basic .NET}}==

Console.WriteLine(Asc("a")) 'Prints 97</syntaxhighlight>

=={{header|Vlang}}==

println('a'[0]) // prints "97"

println('π'[0]) // prints "207"

97->0x61 207->0xcf 128->0x80

</pre>

=={{header|Wren}}==

Wren does not have a ''character'' type as such but one can use single character strings instead. Strings can contain any Unicode code point.

for (c in ["a", "π", "字", "🐘"]) {

var cp = c.codePoints[0]

128024 = 🐘

</pre>

=={{header|XLISP}}==

In a REPL:

 

#\a

 

97</syntaxhighlight>

=={{header|XPL0}}==

A character is represented by an integer value equal to its ASCII code.

character to an integer equal to its ASCII code.

 

ChOut(0, 97); \(Character Out) displays "a" on the console (device 0)</syntaxhighlight>

=={{header|Z80 Assembly}}==

The Z80 doesn't understand what ASCII codes are by itself. Most computers/systems that use it will have firmware that maps each code to its corresponding glyph. Printing a character given its code is trivial. On the Amstrad CPC:

call &BB5a</syntaxhighlight>

 

Printing a character code given a character takes slightly more work. You'll need to separate each hexadecimal digit of the ASCII code, convert each digit to ASCII, and print it. Once again, thanks to Keith of [[http://www.chibiakumas.com Chibiakumas]] for this code:

push af

and %11110000

jp PrintChar ;this is whatever routine prints to the screen on your system.

; It must end in a "ret" and it must take the accumulator as its argument.</syntaxhighlight>

=={{header|Zig}}==

 

const debug = std.debug;

'お' code: 12362 [hexa: U+304a]

All 2 tests passed.</pre>

=={{header|zkl}}==

The character set is 8 bit ASCII (but doesn't care if you use UTF-8 or unicode characters).

(97).toChar() //-->"a"</syntaxhighlight>

=={{header|Zoea}}==

program: character_codes

input: a

output: 97

</syntaxhighlight>

=={{header|Zoea Visual}}==

[http://zoea.co.uk/examples/zv-rc/Character_codes.png Character Codes]

=={{header|ZX Spectrum Basic}}==

20 PRINT CODE "a": REM prints 97</syntaxhighlight>

{{omit from|bc}}

{{omit from|GUISS}}