Abbreviations, simple
The use of abbreviations (also sometimes called synonyms, nicknames, AKAs, or aliases) can be an
easy way to add flexibility when specifying or using commands, sub─commands, options, etc.
You are encouraged to solve this task according to the task description, using any language you may know.
For this task, the following command table will be used:
add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1
Notes concerning the above command table:
- it can be thought of as one long literal string (with blanks at end-of-lines)
- it may have superfluous blanks
- it may be in any case (lower/upper/mixed)
- the order of the words in the command table must be preserved as shown
- the user input(s) may be in any case (upper/lower/mixed)
- commands will be restricted to the Latin alphabet (A ──► Z, a ──► z)
- a command is followed by an optional number, which indicates the minimum abbreviation
- A valid abbreviation is a word that has:
- at least the minimum length of the word's minimum number in the command table
- compares equal (regardless of case) to the leading characters of the word in the command table
- a length not longer than the word in the command table
- ALT, aLt, ALTE, and ALTER are all abbreviations of ALTER 3
- AL, ALF, ALTERS, TER, and A aren't valid abbreviations of ALTER 3
- The 3 indicates that any abbreviation for ALTER must be at least three characters
- Any word longer than five characters can't be an abbreviation for ALTER
- o, ov, oVe, over, overL, overla are all acceptable abbreviations for overlay 1
- if there isn't a number after the command, then there isn't an abbreviation permitted
- Task
-
- The command table needn't be verified/validated.
- Write a function to validate if the user "words" (given as input) are valid (in the command table).
- If the word is valid, then return the full uppercase version of that "word".
- If the word isn't valid, then return the lowercase string: *error* (7 characters).
- A blank input (or a null input) should return a null string.
- Show all output here.
- An example test case to be used for this task
For a user string of:
riG rePEAT copies put mo rest types fup. 6 poweRin
the computer program should return the string:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
ALGOL 68
<lang algol68># "Simple" abbreviations #
- returns the next word from text, updating pos #
PRIO NEXTWORD = 1; OP NEXTWORD = ( REF INT pos, STRING text )STRING:
BEGIN
# skip spaces #
WHILE IF pos > UPB text THEN FALSE ELSE text[ pos ] = " " FI DO pos +:= 1 OD;
# get the word #
STRING word := "";
WHILE IF pos > UPB text THEN FALSE ELSE text[ pos ] /= " " FI DO
word +:= text[ pos ];
pos +:= 1
OD;
word
END # NEXTWORD # ;
- returns text converted to upper case #
OP TOUPPER = ( STRING text )STRING:
BEGIN
STRING result := text;
FOR ch pos FROM LWB result TO UPB result DO
IF is lower( result[ ch pos ] ) THEN result[ ch pos ] := to upper( result[ ch pos ] ) FI
OD;
result
END # TOUPPER # ;
- returns text converted to an INT or -1 if text is not a number #
OP TOINT = ( STRING text )INT:
BEGIN
INT result := 0;
BOOL is numeric := TRUE;
FOR ch pos FROM UPB text BY -1 TO LWB text WHILE is numeric DO
CHAR c = text[ ch pos ];
is numeric := ( c >= "0" AND c <= "9" );
IF is numeric THEN ( result *:= 10 ) +:= ABS c - ABS "0" FI
OD;
IF is numeric THEN result ELSE -1 FI
END # TOINT # ;
- returns the length of word #
OP LENGTH = ( STRING word )INT: 1 + ( UPB word - LWB word );
- counts the number of commands in commands #
PROC count commands = ( STRING commands )INT:
BEGIN
INT result := 0;
INT pos := LWB commands;
WHILE STRING command := pos NEXTWORD commands; command /= "" DO
IF TOINT command < 0 THEN
# not an abbreviation length #
result +:= 1
FI
OD;
result
END # count commands # ;
- list of "commands" - the words are optionally followed by the minimum #
- length of abbreviation - if there isn't a number #
- the command can only appear in full #
STRING commands
= "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " + "compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " + "3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " + "forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " + "locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " + "msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " + "refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " + "2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 " ;
- build the tables of the commands and their minimum lengths #
PROC load commands = ( STRING commands )VOID:
BEGIN
INT cmd pos := 0;
INT pos := LWB command table;
WHILE STRING command := pos NEXTWORD commands; command /= "" DO
INT len := TOINT command;
IF len >= 0 THEN
# have an abbreviation length #
IF cmd pos > 0 THEN min abbreviation[ cmd pos ] := len FI
ELSE
# new command #
cmd pos +:= 1;
command table[ cmd pos ] := TOUPPER command;
min abbreviation[ cmd pos ] := LENGTH command
FI
OD
END # load commands # ;
- searches for word in command table and returns the full command #
- matching the possible abbreviation or *error* if there is no match #
OP EXPAND = ( STRING word )STRING:
IF word = ""
THEN # empty word #
""
ELSE # non-empty word #
INT word len = LENGTH word;
STRING upper word := TOUPPER word;
STRING result := "*error*";
FOR cmd pos FROM LWB command table TO UPB command table
WHILE STRING command := command table[ cmd pos ];
IF word len < min abbreviation[ cmd pos ] OR word len > LENGTH command
THEN # word is too short or too long - try the next command #
TRUE
ELIF upper word = command[ LWB command : ( LWB command - 1 ) + word len ]
THEN # found the command #
result := command;
FALSE
ELSE # word doexn't match - try the next command #
TRUE
FI
DO SKIP OD;
result
FI # EXPAND # ;
- tests the EXPAND operator #
PROC test expand = ( STRING words )VOID:
BEGIN
STRING results := "", separator := "";
INT pos := LWB words;
WHILE STRING word = pos NEXTWORD words; word /= "" DO
results +:= separator + EXPAND word;
separator := " "
OD;
print( ( "Input: ", words, newline ) );
print( ( "Output: ", results, newline ) )
END # test expand # ;
- build the command table #
[ 1 : count commands( commands ) ]STRING command table; [ 1 : UPB command table ]INT min abbreviation; load commands( commands );
- task test cases #
test expand( "riG rePEAT copies put mo rest types fup. 6 poweRin" )</lang>
- Output:
Input: riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
C++
<lang cpp>#include <algorithm>
- include <cctype>
- include <iostream>
- include <sstream>
- include <string>
- include <vector>
const char* command_table =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " "compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " "3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " "forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " "locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " "msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " "refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " "2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1";
class command { public:
command(const std::string&, size_t);
const std::string& cmd() const { return cmd_; }
size_t min_length() const { return min_len_; }
bool match(const std::string&) const;
private:
std::string cmd_; size_t min_len_;
};
// cmd is assumed to be all uppercase command::command(const std::string& cmd, size_t min_len)
: cmd_(cmd), min_len_(min_len)
{ }
// str is assumed to be all uppercase bool command::match(const std::string& str) const {
size_t olen = str.length();
return olen >= min_len_ && olen <= cmd_.length()
&& cmd_.compare(0, olen, str) == 0;
}
bool parse_integer(const std::string& word, int& value) {
try
{
size_t pos;
int i = std::stoi(word, &pos, 10);
if (pos < word.length())
return false;
value = i;
return true;
}
catch (const std::exception& ex)
{
return false;
}
}
// convert string to uppercase void uppercase(std::string& str) {
std::transform(str.begin(), str.end(), str.begin(),
[](unsigned char c) -> unsigned char { return std::toupper(c); });
}
class command_list { public:
explicit command_list(const char*); const command* find_command(const std::string&) const;
private:
std::vector<command> commands_;
};
command_list::command_list(const char* table) {
std::istringstream is(table);
std::string word;
std::vector<std::string> words;
while (is >> word)
{
uppercase(word);
words.push_back(word);
}
for (size_t i = 0, n = words.size(); i < n; ++i)
{
word = words[i];
// if there's an integer following this word, it specifies the minimum
// length for the command, otherwise the minimum length is the length
// of the command string
int len = word.length();
if (i + 1 < n && parse_integer(words[i + 1], len))
++i;
commands_.push_back(command(word, len));
}
}
const command* command_list::find_command(const std::string& word) const {
for (const command& command : commands_)
{
if (command.match(word))
return &command;
}
return nullptr;
}
std::string test(const command_list& commands, const std::string& input) {
std::string output;
std::istringstream is(input);
std::string word;
while (is >> word)
{
if (!output.empty())
output += ' ';
uppercase(word);
const command* cmd_ptr = commands.find_command(word);
if (cmd_ptr)
output += cmd_ptr->cmd();
else
output += "*error*";
}
return output;
}
int main() {
command_list commands(command_table);
std::string input("riG rePEAT copies put mo rest types fup. 6 poweRin");
std::string output(test(commands, input));
std::cout << " input: " << input << '\n';
std::cout << "output: " << output << '\n';
return 0;
}</lang>
- Output:
input: riG rePEAT copies put mo rest types fup. 6 poweRin output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Crystal
<lang crystal>COMMAND_TABLE =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"
def parse_command_table(input : String)
cmds = {} of String => String
table = input.strip.split
word = table[0].upcase
table.each do |item|
if /[0-9]+/.match(item)
abbreviation_length = item.to_i
(0..word.size-abbreviation_length).each do |i|
cmds[word[(0..abbreviation_length-1+i)]] = word
end
else
word = item.upcase
cmds[word] = word
end
end
return cmds
end
def parse_user_input(input : String?, commands)
output = ""
unless input.nil?
user_commands = input.strip.split
user_commands.each do |command|
command = command.upcase
if commands.has_key?(command)
output += commands[command]
else
output += "*error*"
end
output += " "
end
end
return output
end
cmds = parse_command_table(COMMAND_TABLE) puts "Input:" user_input = gets puts "Output:" puts parse_user_input(user_input, cmds) </lang>
- Output:
Input: riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
D
<lang D>class Abbreviations { import std.array: split, join; import std.uni:toUpper;
string[string] replaces;
this(string table) { import std.ascii; import std.conv:parse;
string saved; auto add = (string word){ if(word.length) replaces[word] = word; };
foreach(word; table.toUpper.split) if(isDigit(word[0])) { for(int length=parse!int(word); length<=saved.length; ++length) replaces[saved[0..length]] = saved; } else { add(saved); saved = word; } add(saved); }
string expand(string input) // pre-filled hashtable is used { import std.algorithm: map; return input.toUpper.split.map!(word => word in replaces ? replaces[word] : "*error*").join(" "); } }
string table = "
add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1";
string input = "riG rePEAT copies put mo rest types fup. 6 poweRin"; string expected = "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT";
unittest // 'dmd -unittest ...' to activate it { auto expander = new Abbreviations(table); assert(expander.expand(input) == expected); assert(expander.expand("") == ""); assert(expander.expand("addadd") == "*error*"); }
void main() { import std.stdio:writeln;
writeln("Input : ", input); writeln("Output: ", new Abbreviations(table).expand(input)); } </lang>
- Output:
Input : riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Factor
<lang factor>USING: arrays assocs combinators formatting fry grouping.extras kernel literals math math.parser multiline sequences splitting.extras unicode ; IN: rosetta-code.abbr-simple
CONSTANT: input $[ "riG rePEAT copies put mo rest types fup. 6 " "poweRin" append ]
<< ! Make the following two words available at parse time.
- abbr-pair ( first second -- seq/f )
{
{ [ 2dup drop [ digit? ] all? ] [ 2drop f ] }
{
[ 2dup nip [ Letter? ] all? ]
[ drop >upper 0 2array ]
}
[ [ >upper ] [ string>number ] bi* 2array ]
} cond ;
- parse-commands ( seq -- seq )
" \n" split-harvest [ abbr-pair ] 2clump-map sift ;
>>
CONSTANT: commands $[ HEREDOC: END add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 END parse-commands ]
- valid-abbrevs ( assoc seq -- assoc )
dup '[ [ _ head? ] [ _ length <= ] bi* and ] assoc-filter ;
- find-command ( seq -- seq )
>upper [ commands ] dip valid-abbrevs [ "*error*" ] [ first first ] if-empty ;
- (find-commands) ( seq -- seq )
" " split-harvest [ find-command ] map " " join ;
- find-commands ( seq -- seq )
dup empty? not [ (find-commands) ] when ;
- show-commands ( seq -- )
dup find-commands " Input: \"%s\"\nOutput: \"%s\"\n" printf ;
- main ( -- ) input "" [ show-commands ] bi@ ;
MAIN: main</lang>
- Output:
Input: "riG rePEAT copies put mo rest types fup. 6 poweRin" Output: "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT" Input: "" Output: ""
Forth
Works with any ANS Forth
Needs the FMS-SI (single inheritance) library code located here: http://soton.mpeforth.com/flag/fms/index.html <lang forth>include FMS-SI.f include FMS-SILib.f
${ add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3
compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 } value list ' upper: list map:
- compare' { adr len $obj -- f }
len $obj size: > if false exit then adr len $obj @: drop len compare 0= ;
- <= ( n1 n2 = f) 1+ swap > ;
- abbrev 0 0 { adr len obj1 obj2 -- }
list uneach:
list each: drop to obj1
begin
list each:
while
to obj2
obj2 @: >integer
if \ word followed by a number
len <= if adr len obj1 compare'
if obj1 p: exit then
then list each: if to obj1 else ." *error* " exit then
else \ word not followed by a number
adr len obj1 @: compare 0=
if obj1 p: exit then
obj2 to obj1
then
repeat ;
${ riG rePEAT copies put mo rest types fup. 6 poweRin }
value input-list ' upper: input-list map:
- valid-input ( adr len -- f)
over + swap do i c@ isalpha 0= if ." *error* " unloop false exit then loop true ;
- run
begin input-list each: while dup @: valid-input if @: abbrev space else drop then repeat ;
run RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT ok
</lang>
Go
<lang go>package main
import ( "io" "os" "strconv" "strings" "text/tabwriter" )
func readTable(table string) ([]string, []int) { fields := strings.Fields(table) var commands []string var minLens []int
for i, max := 0, len(fields); i < max; { cmd := fields[i] cmdLen := len(cmd) i++
if i < max { num, err := strconv.Atoi(fields[i]) if err == nil && 1 <= num && num < cmdLen { cmdLen = num i++ } }
commands = append(commands, cmd) minLens = append(minLens, cmdLen) }
return commands, minLens }
func validateCommands(commands []string, minLens []int, words []string) []string { var results []string for _, word := range words { matchFound := false wlen := len(word) for i, command := range commands { if minLens[i] == 0 || wlen < minLens[i] || wlen > len(command) { continue } c := strings.ToUpper(command) w := strings.ToUpper(word) if strings.HasPrefix(c, w) { results = append(results, c) matchFound = true break } } if !matchFound { results = append(results, "*error*") } } return results }
func printResults(words []string, results []string) { wr := tabwriter.NewWriter(os.Stdout, 0, 1, 1, ' ', 0) io.WriteString(wr, "user words:") for _, word := range words { io.WriteString(wr, "\t"+word) } io.WriteString(wr, "\n") io.WriteString(wr, "full words:\t"+strings.Join(results, "\t")+"\n") wr.Flush() }
func main() { const table = "" + "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " + "compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " + "3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " + "forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " + "locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " + "msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " + "refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " + "2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 "
const sentence = "riG rePEAT copies put mo rest types fup. 6 poweRin"
commands, minLens := readTable(table) words := strings.Fields(sentence)
results := validateCommands(commands, minLens, words)
printResults(words, results) } </lang>
- Output:
user words: riG rePEAT copies put mo rest types fup. 6 poweRin full words: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Haskell
<lang haskell>import Data.List (find, isPrefixOf) import Data.Char (isDigit, toUpper) import Data.Maybe (maybe)
withExpansions :: [(String, Int)] -> String -> String withExpansions tbl s = unwords $ expanded tbl <$> words s
expanded :: [(String, Int)] -> String -> String expanded tbl k = maybe "*error" fst (expand k)
where
expand [] = Just ([], 0)
expand s =
let u = toUpper <$> s
lng = length s
in find (\(w, n) -> lng >= n && isPrefixOf u w) tbl
cmdsFromString :: String -> [(String, Int)] cmdsFromString s =
let go w@(x:_) (xs, n)
| isDigit x = (xs, read w :: Int)
| otherwise = ((toUpper <$> w, n) : xs, 0)
in fst $ foldr go ([], 0) (words s)
-- TESTS -------------------------------------------------- table :: [(String, Int)] table =
cmdsFromString "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 \ \Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 \ \cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 \ \extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 \ \forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 \ \split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 \ \Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 \ \parse preserve 4 purge 3 put putD query 1 quit read recover 3 \ \refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 \ \rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 \ \status 4 top transfer 3 type 1 up 1"
main :: IO () main = do
let unAbbrev = withExpansions table
print $
unAbbrev
"riG rePEAT copies put mo rest types fup. 6 poweRin"
print $ unAbbrev ""</lang>
- Output:
"RIGHT REPEAT *error PUT MOVE RESTORE *error *error *error POWERINPUT" ""
J
Warning: http://rosettacode.org/wiki/Abbreviations,_easy#J uses this code without duplication. Must provide expand with the same signature. x is the command table string, y is the user sentence. <lang J> range=:<.+[:i.>.-<. assert 2 3 4 -: 2 range 5 assert (i.0) -: 3 range 3
abbreviate =: 3 :0
NB. input is the abbreviation table
NB. output are the valid abbreviations
y =. toupper CRLF -.~ y
y =. ;: y
y =. (([: (,3":#)L:_1 {)`[`]}~ ([: I. [: -. {.@e.&Num_j_&>)) y
y =. [&.:(;:inv) y
y =. _2 ({. , <./@:".&.>@:{:)\ y
y =. (<@] , ((range #) <@{."0 _ ]))&.>~/"1 y
ambiguities =. ;#~1<[:+/e.
(([: ~. {.@:[ , -.)L:_1 <@:ambiguities) y
) assert ('ABC A AB' ,&(<@;:) 'ABCDE ABCD') -: abbreviate 'abc 1 abcde 3' assert ('ABC A AB' ,&(<@;:) 'ABCDE') -: abbreviate 'abc 1 abcde'
expand =: dyad define
a =. abbreviate x
words =. <;._2 ' ' ,~ deb toupper y
interval_index =. <: +/\ #&> a
a =. a , <,<'*error*'
;:inv {.&> (interval_index I.(; a )i."_ 0 words){ a
) </lang>
command_table =: 0 :0 add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 ) user_words =: 'riG rePEAT copies put mo rest types fup. 6 poweRin' command_table expand user_words RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Java
<lang java>import java.util.*;
public class Abbreviations {
public static void main(String[] args)
{
CommandList commands = new CommandList(commandTable);
String input = "riG rePEAT copies put mo rest types fup. 6 poweRin";
System.out.println(" input: " + input);
System.out.println("output: " + test(commands, input));
}
private static String test(CommandList commands, String input)
{
StringBuilder output = new StringBuilder();
Scanner scanner = new Scanner(input);
while (scanner.hasNext())
{
String word = scanner.next();
if (output.length() > 0)
output.append(' ');
Command cmd = commands.findCommand(word);
if (cmd != null)
output.append(cmd.cmd);
else
output.append("*error*");
}
return output.toString();
}
private static String commandTable =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " +
"compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " +
"3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " +
"forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " +
"locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " +
"msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " +
"refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " +
"2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1";
private static class Command
{
private Command(String cmd, int minLength)
{
this.cmd = cmd;
this.minLength = minLength;
}
private boolean match(String str)
{
int olen = str.length();
return olen >= minLength && olen <= cmd.length()
&& cmd.regionMatches(true, 0, str, 0, olen);
}
private String cmd;
private int minLength;
}
private static Integer parseInteger(String word)
{
try
{
return Integer.valueOf(word);
}
catch (NumberFormatException ex)
{
return null;
}
}
private static class CommandList
{
private CommandList(String table)
{
Scanner scanner = new Scanner(table);
List<String> words = new ArrayList<>();
while (scanner.hasNext())
{
String word = scanner.next();
words.add(word.toUpperCase());
}
for (int i = 0, n = words.size(); i < n; ++i)
{
String word = words.get(i);
// if there's an integer following this word, it specifies the minimum
// length for the command, otherwise the minimum length is the length
// of the command string
int len = word.length();
if (i + 1 < n)
{
Integer number = parseInteger(words.get(i + 1));
if (number != null)
{
len = number.intValue();
++i;
}
}
commands.add(new Command(word, len));
}
}
private Command findCommand(String word)
{
for (Command command : commands)
{
if (command.match(word))
return command;
}
return null;
}
private List<Command> commands = new ArrayList<>();
}
}</lang>
- Output:
input: riG rePEAT copies put mo rest types fup. 6 poweRin output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
JavaScript
<lang javascript>(() => {
'use strict';
// withExpansions :: [(String, Int)] -> String -> String
const withExpansions = tbl => s =>
unwords(map(expanded(tbl), words(s)));
// expanded :: [(String, Int)] -> String -> String
const expanded = tbl => s => {
const
lng = s.length,
u = toUpper(s),
p = wn => {
const [w, n] = Array.from(wn);
return lng >= n && isPrefixOf(u, w);
}
return maybe(
'*error*',
fst,
0 < lng ? (
find(p, tbl)
) : Just(Tuple([], 0))
);
};
// cmdsFromString :: String -> [(String, Int)]
const cmdsFromString = s =>
fst(foldr(
(w, a) => {
const [xs, n] = Array.from(a);
return isDigit(head(w)) ? (
Tuple(xs, parseInt(w, 10))
) : Tuple(
[Tuple(toUpper(w), n)].concat(xs),
0
);
},
Tuple([], 0),
words(s)
));
// TEST -----------------------------------------------
const main = () => {
// table :: [(String, Int)]
const table = cmdsFromString(
`add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1
Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3
cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3
extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2
forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1
split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3
Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1
parse preserve 4 purge 3 put putD query 1 quit read recover 3
refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4
rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3
status 4 top transfer 3 type 1 up 1`
);
return fTable(
'Abbreviation tests:\n',
s => "'" + s + "'",
s => "\n\t'" + s + "'",
withExpansions(table),
[
'riG rePEAT copies put mo rest types fup. 6 poweRin',
]
);
};
// GENERIC FUNCTIONS ----------------------------------
// Just :: a -> Maybe a
const Just = x => ({
type: 'Maybe',
Nothing: false,
Just: x
});
// Nothing :: Maybe a
const Nothing = () => ({
type: 'Maybe',
Nothing: true,
});
// Tuple (,) :: a -> b -> (a, b)
const Tuple = (a, b) => ({
type: 'Tuple',
'0': a,
'1': b,
length: 2
});
// compose (<<<) :: (b -> c) -> (a -> b) -> a -> c const compose = (f, g) => x => f(g(x));
// find :: (a -> Bool) -> [a] -> Maybe a
const find = (p, xs) => {
for (let i = 0, lng = xs.length; i < lng; i++) {
if (p(xs[i])) return Just(xs[i]);
}
return Nothing();
};
// flip :: (a -> b -> c) -> b -> a -> c
const flip = f =>
1 < f.length ? (
(a, b) => f(b, a)
) : (x => y => f(y)(x));
// foldl1 :: (a -> a -> a) -> [a] -> a
const foldl1 = (f, xs) =>
1 < xs.length ? xs.slice(1)
.reduce(f, xs[0]) : xs[0];
// foldr :: (a -> b -> b) -> b -> [a] -> b const foldr = (f, a, xs) => xs.reduceRight(flip(f), a);
// fst :: (a, b) -> a const fst = tpl => tpl[0];
// fTable :: String -> (a -> String) ->
// (b -> String) -> (a -> b) -> [a] -> String
const fTable = (s, xShow, fxShow, f, xs) => {
// Heading -> x display function ->
// fx display function ->
// f -> values -> tabular string
const
ys = map(xShow, xs),
w = maximum(map(length, ys)),
rows = zipWith(
(a, b) => justifyRight(w, ' ', a) + ' -> ' + b,
ys,
map(compose(fxShow, f), xs)
);
return s + '\n' + unlines(rows);
};
// head :: [a] -> a const head = xs => xs.length ? xs[0] : undefined;
// isDigit :: Char -> Bool
const isDigit = c => {
const n = ord(c);
return 48 <= n && 57 >= n;
};
// isPrefixOf takes two lists or strings and returns // true iff the first is a prefix of the second.
// isPrefixOf :: [a] -> [a] -> Bool
// isPrefixOf :: String -> String -> Bool
const isPrefixOf = (xs, ys) => {
const go = (xs, ys) => {
const intX = xs.length;
return 0 < intX ? (
ys.length >= intX ? xs[0] === ys[0] && go(
xs.slice(1), ys.slice(1)
) : false
) : true;
};
return 'string' !== typeof xs ? (
go(xs, ys)
) : ys.startsWith(xs);
};
// justifyRight :: Int -> Char -> String -> String
const justifyRight = (n, cFiller, s) =>
n > s.length ? (
s.padStart(n, cFiller)
) : s;
// Returns Infinity over objects without finite length. // This enables zip and zipWith to choose the shorter // argument when one is non-finite, like cycle, repeat etc
// length :: [a] -> Int
const length = xs =>
(Array.isArray(xs) || 'string' === typeof xs) ? (
xs.length
) : Infinity;
// map :: (a -> b) -> [a] -> [b]
const map = (f, xs) =>
(Array.isArray(xs) ? (
xs
) : xs.split()).map(f);
// maximum :: Ord a => [a] -> a
const maximum = xs =>
0 < xs.length ? (
foldl1((a, x) => x > a ? x : a, xs)
) : undefined;
// maybe :: b -> (a -> b) -> Maybe a -> b
const maybe = (v, f, m) =>
m.Nothing ? v : f(m.Just);
// ord :: Char -> Int const ord = c => c.codePointAt(0);
// take :: Int -> [a] -> [a]
// take :: Int -> String -> String
const take = (n, xs) =>
'GeneratorFunction' !== xs.constructor.constructor.name ? (
xs.slice(0, n)
) : [].concat.apply([], Array.from({
length: n
}, () => {
const x = xs.next();
return x.done ? [] : [x.value];
}));
// toUpper :: String -> String const toUpper = s => s.toLocaleUpperCase();
// unlines :: [String] -> String
const unlines = xs => xs.join('\n');
// unwords :: [String] -> String
const unwords = xs => xs.join(' ');
// words :: String -> [String] const words = s => s.split(/\s+/);
// Use of `take` and `length` here allows zipping with non-finite lists // i.e. generators like cycle, repeat, iterate.
// zipWith :: (a -> b -> c) -> [a] -> [b] -> [c]
const zipWith = (f, xs, ys) => {
const
lng = Math.min(length(xs), length(ys)),
as = take(lng, xs),
bs = take(lng, ys);
return Array.from({
length: lng
}, (_, i) => f(as[i], bs[i], i));
};
// MAIN --- return main();
})();</lang>
- Output:
Abbreviation tests:
'riG rePEAT copies put mo rest types fup. 6 poweRin' ->
'RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT'
'' ->
''
Julia
<lang julia> const commandtable = """ add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"""
function makedict(tbl)
str = split(uppercase(tbl), r"\s+")
dict = Dict{String, String}()
for (i, s) in enumerate(str)
if (n = tryparse(Int, s)) != nothing
dict[str[i-1][1:n]] = str[i-1]
else
dict[s] = s
end
end
dict
end
function okabbrev(dict, abb)
for i in length(abb):-1:1
if haskey(dict, abb[1:i])
com = dict[abb[1:i]]
if length(abb) <= length(com) && abb == com[1:length(abb)]
return dict[abb[1:i]]
end
end
end
return "*error*"
end
formattedprint(arr, n) = (for s in arr print(rpad(s, n)) end; println())
function teststring(str)
d = makedict(commandtable) commands = split(str, r"\s+") formattedprint(commands, 9) formattedprint([okabbrev(d, uppercase(s)) for s in commands], 9)
end
teststring("riG rePEAT copies put mo rest types fup. 6 poweRin")
</lang>
- Output:
riG rePEAT copies put mo rest types fup. 6 poweRin RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Kotlin
<lang kotlin>import java.util.Locale
private const val table = "" +
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " +
"compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " +
"3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " +
"forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " +
"locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " +
"msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " +
"refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " +
"2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 "
private data class Command(val name: String, val minLen: Int)
private fun parse(commandList: String): List<Command> {
val commands = mutableListOf<Command>()
val fields = commandList.trim().split(" ")
var i = 0
while (i < fields.size) {
val name = fields[i++]
var minLen = name.length
if (i < fields.size) {
val num = fields[i].toIntOrNull()
if (num != null && num in 1..minLen) {
minLen = num
i++
}
}
commands.add(Command(name, minLen))
}
return commands
}
private fun get(commands: List<Command>, word: String): String? {
for ((name, minLen) in commands) {
if (word.length in minLen..name.length && name.startsWith(word, true)) {
return name.toUpperCase(Locale.ROOT)
}
}
return null
}
fun main(args: Array<String>) {
val commands = parse(table)
val sentence = "riG rePEAT copies put mo rest types fup. 6 poweRin"
val words = sentence.trim().split(" ")
val results = words.map { word -> get(commands, word) ?: "*error*" }
val paddedUserWords = words.mapIndexed { i, word -> word.padEnd(results[i].length) }
println("user words: ${paddedUserWords.joinToString(" ")}")
println("full words: ${results.joinToString(" ")}")
} </lang>
- Output:
user words: riG rePEAT copies put mo rest types fup. 6 poweRin full words: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
MiniScript
<lang MiniScript>c = "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3" +
" compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate" + " 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2" + " forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load" + " locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2" + " msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3" + " refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left" + " 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"
minLen = {} lastItem = "" for item in c.split
if item == "" then continue
item = item.upper
if lastItem and item[0] >= "0" and item[0] <= "9" then
minLen[lastItem] = val(item)
lastItem = ""
else
minLen[item] = null
lastItem = item
end if
end for
check = function(word)
word = word.upper
for key in minLen.indexes
if key[:word.len] != word then continue
min = minLen[key]
if min and word.len < min then continue
return key
end for
return "*error*"
end function
input = "riG rePEAT copies put mo rest types fup. 6 poweRin"
output = [] for word in input.split
if word == "" then continue output.push check(word)
end for print output.join</lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
OCaml
<lang ocaml>open String
let table_as_string =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 \ Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 \ Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 \ xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 \ Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 \ input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 \ Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 \ modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 \ put putD query 1 quit read recover 3 refresh renum 3 repeat 3 \ replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 \ save set shift 2 si sort sos stack 3 status 4 top \ transfer 3 type 1 up 1"</lang>
The interesting part below is the compare function. We'll use it when storing our entries ( {"add";1}, {"alter";3}, etc ) and when looking for a word, from a given abbreviation. For the former, a simple comparison function on strings is enough, but for the latter, we need to ensure that the word corresponds to the abbreviation (the abbreviation is a substring of the word and the abbreviation length is sufficient). <lang ocaml>module Entry = struct
type t = { word : string ; min : int }
let compare e1 e2 =
let n1 = length e1.word in
if n1 < e2.min || n1 > length e2.word then
compare e1.word e2.word
else
compare (sub e1.word 0 n1) (sub e2.word 0 n1)
end
module Table = Set.Make(Entry)</lang>
The few functions below are used to build the table from the string at the beginning. <lang ocaml>let clean_strings strs =
List.filter (fun w -> w <> "" && w <> " ") strs
let rec split = function
| [] -> Table.empty
| [w] ->
Table.singleton { word=w ; min=length w }
| w::x::t ->
try
let m = int_of_string x in
Table.add { word=uppercase_ascii w ; min=m } (split t)
with Failure _ ->
let m = length w in
Table.add { word=uppercase_ascii w ; min=m } (split (x::t))
let make_table table_as_string =
split_on_char ' ' table_as_string |> clean_strings |> split</lang>
Finally, here is the function looking for a word : <lang ocaml>let abbrev (table:Table.t) (w:string) : string =
let w = uppercase_ascii w in
try
let e = Table.find { word=w ; min=length w } table in e.word
with Not_found -> "*error*"
let rec check (table:Table.t) (inputs:string list) : unit =
List.map (abbrev table) inputs
|> List.iter (Printf.printf "%s ");
print_newline ()
let main =
let table = make_table table_as_string in let inputs = ["riG";"rePEAT";"copies";"put";"mo";"rest";"types";"fup.";"6";"poweRin"] in check table inputs; exit 0</lang>
- Output:
Input: riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Perl
<lang perl>@c = (uc join ' ', qw< add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 >) =~ /([a-zA-Z]+(?:\s+\d+)?)(?=\s+[a-zA-Z]|$)/g;
my %abr = ( => , ' ' => ); for (@c) {
($w,$sl) = split ' ', $_;
$ll = length($w);
$sl = $ll unless $sl;
$abr{substr($w,0,$sl)} = $w;
map { $abr{substr($w, 0, $_)} = $w } $sl .. $ll;
}
$fmt = "%-10s"; $inp = sprintf $fmt, 'Input:'; $out = sprintf $fmt, 'Output:'; for $str (, qw<riG rePEAT copies put mo rest types fup. 6 poweRin>) {
$inp .= sprintf $fmt, $str;
$out .= sprintf $fmt, $abr{uc $str} // '*error*';
}
print "$inp\n$out\n";</lang>
- Output:
Input: riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Phix
<lang Phix>constant abbrtxt = """
add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1
""", input = "riG rePEAT copies put mo rest types fup. 6 poweRin"
function set_min_lengths(sequence a) -- -- set default lengths and apply min lengths if present, eg ..."macro","merge","2",... -- ==> {.."macro",5}} ==> {.."macro",5},{"merge",5}} ==> {.."macro",5},{"merge",2}} -- ie both macro and merge get a default min length of 5, but the min length of merge -- is overwritten when the "2" is processed. --
sequence res = {}
for i=1 to length(a) do
string ai = a[i]
if length(ai)=1 and ai>="1" and ai<="9" then
res[$][2] = ai[1]-'0'
else
res = append(res,{ai,length(ai)})
end if
end for
return res
end function
constant abbrevs = set_min_lengths(split(substitute(abbrtxt,"\n"," "),no_empty:=true)) constant inputs = split(input,no_empty:=true)
for i=1 to length(inputs) do
string ii = inputs[i],
res = "*error*"
for j=1 to length(abbrevs) do
{string aj, integer l} = abbrevs[j]
if length(ii)>=l
and match(ii,aj,case_insensitive:=true)==1 then
res = upper(aj)
exit
end if
end for
puts(1,res&" ")
end for puts(1,"\n")</lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Python
Procedural
<lang python>
command_table_text = """add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3
compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"""
user_words = "riG rePEAT copies put mo rest types fup. 6 poweRin"
def find_abbreviations_length(command_table_text):
""" find the minimal abbreviation length for each word.
a word that does not have minimum abbreviation length specified
gets it's full lengths as the minimum.
"""
command_table = dict()
input_iter = iter(command_table_text.split())
word = None
try:
while True:
if word is None:
word = next(input_iter)
abbr_len = next(input_iter, len(word))
try:
command_table[word] = int(abbr_len)
word = None
except ValueError:
command_table[word] = len(word)
word = abbr_len
except StopIteration:
pass
return command_table
def find_abbreviations(command_table):
""" for each command insert all possible abbreviations"""
abbreviations = dict()
for command, min_abbr_len in command_table.items():
for l in range(min_abbr_len, len(command)+1):
abbr = command[:l].lower()
abbreviations[abbr] = command.upper()
return abbreviations
def parse_user_string(user_string, abbreviations):
user_words = [word.lower() for word in user_string.split()] commands = [abbreviations.get(user_word, "*error*") for user_word in user_words] return " ".join(commands)
command_table = find_abbreviations_length(command_table_text)
abbreviations_table = find_abbreviations(command_table)
full_words = parse_user_string(user_words, abbreviations_table)
print("user words:", user_words) print("full words:", full_words) </lang>
- Output:
input: "" output: "" input: "riG rePEAT copies put mo rest types fup. 6 poweRin" output: "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT"
Composition of pure functions
<lang python>Simple abbreviations
from functools import reduce import re
- withExpansions :: [(String, Int)] -> String -> String
def withExpansions(table):
A string in which all words are either
expanded (if they match abbreviations in
a supplied table), or replaced with an
'*error*' string.
return lambda s: unwords(map(
expanded(table), words(s)
))
- expanded :: [(String, Int)] -> String -> String
def expanded(table):
An abbreviation (or error string) for
a given word, based on a table of full
strings and minimum abbreviation lengths.
def expansion(k):
u = k.upper()
lng = len(k)
def p(wn):
w, n = wn
return w.startswith(u) and lng >= n
return find(p)(table) if k else Just((, 0))
return lambda s: maybe('*error*')(fst)(expansion(s))
- cmdsFromString :: String -> [(String, Int)]
def cmdsFromString(s):
A simple rule-base consisting of a
list of tuples [(
upper case expansion string,
minimum character count of abbreviation
)],
obtained by a parse of single input string.
def go(a, x):
xs, n = a
return (xs, int(x)) if x.isdigit() else (
([(x.upper(), n)] + xs, 0)
)
return fst(reduce(
go,
reversed(re.split(r'\s+', s)),
([], 0)
))
- TEST -------------------------------------------------
def main():
Tests of abbreviation expansions
# table :: [(String, Int)]
table = cmdsFromString(
add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1
Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3
cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3
extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2
forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1
split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3
Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1
parse preserve 4 purge 3 put putD query 1 quit read recover 3
refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4
rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3
status 4 top transfer 3 type 1 up 1
)
# tests :: [String]
tests = [
'riG rePEAT copies put mo rest types fup. 6 poweRin',
]
print(
fTable(__doc__ + ':\n')(lambda s: "'" + s + "'")(
lambda s: "\n\t'" + s + "'"
)(withExpansions(table))(tests)
)
- GENERIC -------------------------------------------------
- compose (<<<) :: (b -> c) -> (a -> b) -> a -> c
def compose(g):
Right to left function composition. return lambda f: lambda x: g(f(x))
- Just :: a -> Maybe a
def Just(x):
Constructor for an inhabited Maybe (option type) value.
return {'type': 'Maybe', 'Nothing': False, 'Just': x}
- Nothing :: Maybe a
def Nothing():
Constructor for an empty Maybe (option type) value.
return {'type': 'Maybe', 'Nothing': True}
- find :: (a -> Bool) -> [a] -> Maybe a
def find(p):
Just the first element in the list that matches p,
or Nothing if no elements match.
def go(xs):
for x in xs:
if p(x):
return Just(x)
return Nothing()
return lambda xs: go(xs)
- fst :: (a, b) -> a
def fst(tpl):
First member of a pair. return tpl[0]
- fTable :: String -> (a -> String)
- -> (b -> String) -> (a -> b) -> [a] -> String
def fTable(s):
Heading -> x display function ->
fx display function ->
f -> value list -> tabular string.
def go(xShow, fxShow, f, xs):
w = max(map(compose(len)(xShow), xs))
return s + '\n' + '\n'.join([
xShow(x).rjust(w, ' ') + (' -> ') + fxShow(f(x))
for x in xs
])
return lambda xShow: lambda fxShow: lambda f: lambda xs: go(
xShow, fxShow, f, xs
)
- maybe :: b -> (a -> b) -> Maybe a -> b
def maybe(v):
Either the default value v, if m is Nothing,
or the application of f to x,
where m is Just(x).
return lambda f: lambda m: v if m.get('Nothing') else (
f(m.get('Just'))
)
- unwords :: [String] -> String
def unwords(xs):
A space-separated string derived from
a list of words.
return ' '.join(xs)
- words :: String -> [String]
def words(s):
A list of words delimited by characters
representing white space.
return re.split(r'\s+', s)
- MAIN ---
if __name__ == '__main__':
main()</lang>
- Output:
Simple abbreviations:
'riG rePEAT copies put mo rest types fup. 6 poweRin' ->
'RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT'
'' ->
''
Racket
<lang racket>#lang racket (require srfi/13)
(define command-table #<<EOS add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 EOS
)
(define command/abbr-length-pairs
(let loop ((cmd-len-list (string-split command-table)) (acc (list)))
(match cmd-len-list
((list) (sort acc < #:key cdr))
((list-rest a (app string->number (and ad (not #f))) dd) (loop dd (cons (cons a ad) acc)))
((list-rest a d) (loop d (cons (cons a (string-length a)) acc))))))
(define (validate-word w)
(or (let ((w-len (string-length w)))
(for/first ((candidate command/abbr-length-pairs)
#:when (and (>= w-len (cdr candidate)) (string-prefix-ci? w (car candidate))))
(string-upcase (car candidate))))
"*error*"))
(define (validate-string s) (string-join (map validate-word (string-split s))))
(module+ main
(define (debug-i/o s) (printf "input: ~s~%output: ~s~%" s (validate-string s))) (debug-i/o "") (debug-i/o "riG rePEAT copies put mo rest types fup. 6 poweRin"))
(module+ test
(require rackunit) (check-equal? (validate-string "riG rePEAT copies put mo rest types fup. 6 poweRin") "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT") (check-equal? (validate-string "") ""))</lang>
- Output:
input: "" output: "" input: "riG rePEAT copies put mo rest types fup. 6 poweRin" output: "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT"
Raku
(formerly Perl 6)
Demonstrate that inputting an empty string returns an empty string in addition to the required test input.
<lang perl6>< add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 > ~~ m:g/ (<.alpha>+) \s* (\d*) /;
my %abr = => , |$/.map: {
my $abbrv = .[0].Str.fc;
|map { $abbrv.substr( 0, $_ ) => $abbrv.uc },
+(.[1].Str || .[0].Str.chars) .. .[0].Str.chars;
};
sub abbr-simple ( $str ) { %abr{$str.trim.fc} // '*error*' }
- Testing
for 'riG rePEAT copies put mo rest types fup. 6 poweRin', -> $str {
put ' Input: ', $str; put 'Output: ', join ' ', $str.words.map: *.&abbr-simple;
}</lang>
- Output:
Input: riG rePEAT copies put mo rest types fup. 6 poweRin Output: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT Input: Output:
REXX
<lang rexx>/*REXX program validates a user "word" against a "command table" with abbreviations.*/ parse arg uw /*obtain optional arguments from the CL*/ if uw= then uw= 'riG rePEAT copies put mo rest types fup. 6 poweRin' say 'user words: ' uw
@= 'add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3',
'compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate', '3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2', 'forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load', 'locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2', 'msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3', 'refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left', '2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1'
say 'full words: ' validate(uw) /*display the result(s) to the terminal*/ exit /*stick a fork in it, we're all done. */ /*──────────────────────────────────────────────────────────────────────────────────────*/ validate: procedure expose @; arg x; upper @ /*ARG capitalizes all the X words. */
$= /*initialize the return string to null.*/
do j=1 to words(x); _=word(x, j) /*obtain a word from the X list. */
do k=1 to words(@); a=word(@, k) /*get a legitmate command name from @.*/
L=word(@, k+1) /*··· and maybe get it's abbrev length.*/
if datatype(L, 'W') then k=k + 1 /*yuppers, it's an abbrev length.*/
else L=length(a) /*nope, it can't be abbreviated.*/
if abbrev(a, _, L) then do; $=$ a; iterate j; end /*is valid abbrev?*/
end /*k*/
$=$ '*error*' /*processed the whole list, not valid. */
end /*j*/
return strip($) /*elide the superfluous leading blank. */</lang>
- output when using the default input:
user words: riG rePEAT copies put mo rest types fup. 6 poweRin full words: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Ruby
<lang Ruby>str = "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3
compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"
RE = /(?<word1>[a-zA-Z]+)\s+(?<word2>[a-zA-Z]+)/ str = str.upcase
- add missing wordsizes
2.times{ str.gsub!(RE){ [ $~[:word1], $~[:word1].size, $~[:word2] ].join(" ")} }
table = Hash[*str.split].transform_values(&:to_i)
test = "riG rePEAT copies put mo rest types fup. 6 poweRin" ar = test.split.map do |w|
(res = table.detect{|k,v| k.start_with?(w.upcase) && w.size >= v}) ? res[0] : "*error*"
end
puts ar.join(" ") </lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Rust
cargo clippy and cargo fmt run against it <lang rust>use std::collections::HashMap;
// The plan here is to build a hashmap of all the commands keyed on the minimum number of // letters than can be provided in the input to match. For each known command it will appear // in a list of possible commands for a given string lengths. A command can therefore appear a // number of times. For example, the command 'recover' has a minimum abbreviation length of 3. // In the hashmap 'recover' will be stored behind keys for 3, 4, 5, 6 & 7 as any abbreviation of // 'recover' from 3 until 7 letters inclusive can match. This way, once the length of the input // string is known a subset of possible matches can be retrieved immediately and then checked. // fn main() {
let command_table_string =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3
compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate
3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2
forward 2 get help 1 hexType 4 input_command 1 powerInput 3 join 1 split 2 spltJOIN load
locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2
msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3
refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left
2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1";
// Split up the command table string using the whitespace and set up an iterator // to run through it. We need the iterator to be peekable so that we can look ahead at // the next item. let mut iter = command_table_string.split_whitespace().peekable();
let mut command_table = HashMap::new();
// Attempt to take two items at a time from the command table string. These two items will be
// the command string and the minimum length of the abbreviation. If there is no abbreviation length
// then there is no number provided. As the second item might not be a number, so we need to peek at
// it first. If it is a number we can use it as a key for the hashmap. If it is not a number then
// we use the length of the first item instead because no abbreviations are available for the
// word i.e. the whole word must be used. A while loop is used because we need to control iteration
// and look ahead.
//
while let Some(command_string) = iter.next() {
let command_string_length = command_string.len() as i32;
let min_letter_match = match iter.peek() {
Some(potential_number) => match potential_number.parse::<i32>() {
Ok(number) => {
iter.next();
number
}
Err(_) => command_string_length,
},
None => break,
};
// The word must be stored for every valid abbreviation length.
//
for i in min_letter_match..=command_string_length {
let cmd_list = command_table.entry(i).or_insert_with(Vec::new);
cmd_list.push(command_string.to_uppercase());
}
}
const ERROR_TEXT: &str = "*error*";
let test_input_text = "riG rePEAT copies put mo rest types fup. 6 poweRin";
let mut output_text = String::new();
let mut iter = test_input_text.split_whitespace().peekable();
// Run through each item in the input string, find the length of it
// and then use this to fetch a list of possible matches.
// A while loop is used because we need to look ahead in order to indentify
// the last item and avoid adding an unnecessary space.
//
while let Some(input_command) = iter.next() {
let input_command_length = input_command.len() as i32;
let command_list = match command_table.get(&input_command_length) {
Some(list) => list,
None => {
output_text.push_str(ERROR_TEXT);
continue;
}
};
let input_command_caps = input_command.to_uppercase();
let matched_commands: Vec<&String> = command_list
.iter()
.filter(|command| command.starts_with(&input_command_caps))
.collect();
// Should either be 0 or 1 command found
assert!(
matched_commands.len() < 2,
"Strange.. {:?}",
matched_commands
);
match matched_commands.first() {
Some(cmd) => output_text.push_str(cmd),
None => output_text.push_str(ERROR_TEXT),
}
if iter.peek().is_some() {
output_text.push(' ');
}
}
println!("Input was: {}", test_input_text);
println!("Output is: {}", output_text);
let correct_output = "RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT"; assert_eq!(output_text, correct_output)
}</lang>
- Output:
Input was: riG rePEAT copies put mo rest types fup. 6 poweRin Output is: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Scala
<lang Scala> object Main extends App {
implicit class StrOps(i: String) {
def isAbbreviationOf(target: String, targetMinLength: Int): Boolean = {
@scala.annotation.tailrec
def checkPAsPrefixOfM(p: List[Char], m: List[Char]): Boolean = (p, m) match {
case (Nil, _) => true //prefix empty
case (_, Nil) => false //main string empty
case (ph :: pt, mh :: mt) if ph.toUpper == mh.toUpper => checkPAsPrefixOfM(pt, mt) //case insensitive match of head characters
case _ => false
}
i.length >= targetMinLength && checkPAsPrefixOfM(i.toList, target.toList)
}
}
val commands = """
add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3
compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate
3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2
forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load
locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2
msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3
refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left
2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1
""".stripMargin.replace("\n", " ").trim.split(" ")
val commandWithMinLengths = commands.sliding(2, 1)
.filter{ window =>
window.length > 1 && Try(window(0).toInt).toOption.isEmpty
}
.map{ w =>
(
w(0),
Try(w(1).toInt).toOption.getOrElse(0)
)
}
.toList
val input = "riG rePEAT copies put mo rest types fup. 6 poweRin".split(" ").filter(!_.isEmpty)
val resultLine = input.map{ i =>
commandWithMinLengths.find{case (c, l) => i.isAbbreviationOf(c, l)}.map(_._1.toUpperCase).getOrElse("*error*")
}.mkString(" ")
println(resultLine)
} </lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Tcl
<lang tcl>proc appendCmd {word} {
# Procedure to append the correct command from the global list ::cmds
# for the word given as parameter to the global list ::result.
# If a matching word has been found and appended to ::result, this procedure
# behaves like a "continue" statement, causing the loop containing it to
# jump over the rest of the body.
set candidates [lsearch -inline -all -nocase -glob $::cmds "${word}*"]
foreach cand $candidates {
if {[string length $word] >= $::minLen($cand)} {
lappend ::result [string toupper $cand]
return -code continue
}
}
}
set cmds {Add ALTer BAckup Bottom CAppend Change SCHANGE CInsert CLAst COMPress COpy
COUnt COVerlay CURsor DELete CDelete Down DUPlicate Xedit EXPand EXTract Find NFind NFINDUp NFUp CFind FINdup FUp FOrward GET Help HEXType Input POWerinput Join SPlit SPLTJOIN LOAD Locate CLocate LOWercase UPPercase LPrefix MACRO MErge MODify MOve MSG Next Overlay PARSE PREServe PURge PUT PUTD Query QUIT READ RECover REFRESH RENum REPeat Replace CReplace RESet RESTore RGTLEFT RIght LEft SAVE SET SHift SI SORT SOS STAck STATus TOP TRAnsfer Type Up}
- Find the minimum lengths necessary for each command.
foreach c $cmds {
regexp {^[A-Z]+} $c match
set minLen($c) [string length $match]
}
set words {riG rePEAT copies put mo rest types fup. 6 poweRin} set result {}
foreach w $words {
appendCmd $w lappend result *error*
}
puts "user words: $words" puts $result</lang>
- Output:
./abbreviations_simple.tcluser words: riG rePEAT copies put mo rest types fup. 6 poweRin RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
VBA
<lang vb>Private Function ValidateUserWords(userstring As String) As String
Dim s As String
Dim user_words() As String
Dim command_table As Scripting.Dictionary
Set command_table = New Scripting.Dictionary
Dim abbreviations As Scripting.Dictionary
Set abbreviations = New Scripting.Dictionary
abbreviations.CompareMode = TextCompare
Dim commandtable() As String
Dim commands As String
s = s & "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 "
s = s & "compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate "
s = s & "3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 "
s = s & "forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load "
s = s & "locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 "
s = s & "msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 "
s = s & "refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left "
s = s & "2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1 "
commandtable = Split(s, " ")
Dim i As Integer, word As Variant, number As Integer
For i = LBound(commandtable) To UBound(commandtable)
word = commandtable(i)
If Len(word) > 0 Then
i = i + 1
Do While Len(commandtable(i)) = 0: i = i + 1: Loop
number = Val(commandtable(i))
If number > 0 Then
command_table.Add Key:=word, Item:=number
Else
command_table.Add Key:=word, Item:=Len(word)
i = i - 1
End If
End If
Next i
For Each word In command_table
For i = command_table(word) To Len(word)
On Error Resume Next
abbreviations.Add Key:=Left(word, i), Item:=UCase(word)
Next i
Next word
user_words() = Split(userstring, " ")
For Each word In user_words
If Len(word) > 0 Then
If abbreviations.exists(word) Then
commands = commands & abbreviations(word) & " "
Else
commands = commands & "*error* "
End If
End If
Next word
ValidateUserWords = commands
End Function Public Sub program()
Dim guserstring As String guserstring = "riG rePEAT copies put mo rest types fup. 6 poweRin" Debug.Print "user words:", guserstring Debug.Print "full words:", ValidateUserWords(guserstring)
End Sub </lang>
- Output:
user words: riG rePEAT copies put mo rest types fup. 6 poweRinfull words: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Wren
Based on an older version of the Go entry. <lang ecmascript>import "/fmt" for Fmt import "/str" for Str
var table =
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 " + "compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate " + "3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 " + "forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load " + "locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 " + "msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 " + "refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left " + "2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"
var validate = Fn.new { |commands, words, minLens|
var results = []
if (words.count == 0) return results
for (word in words) {
var matchFound = false
var wlen = word.count
for (i in 0...commands.count) {
var command = commands[i]
if (minLens[i] != 0 && wlen >= minLens[i] && wlen <= command.count) {
var c = Str.upper(command)
var w = Str.upper(word)
if (c.startsWith(w)) {
results.add(c)
matchFound = true
break
}
}
}
if (!matchFound) results.add("*error*")
}
return results
}
var splits = table.split(" ") // get rid of empty entries for (i in splits.count-1..0) if (splits[i] == "") splits.removeAt(i) var slen = splits.count var commands = [] var minLens = [] var i = 0 while (true) {
commands.add(splits[i])
var len = splits[i].count
if (i == slen - 1) {
minLens.add(len)
break
}
i = i + 1
var num = Num.fromString(splits[i])
if (num != null) {
minLens.add( (num < len) ? num : len )
i = i + 1
if (i == slen) break
} else minLens.add(len)
} var sentence = "riG rePEAT copies put mo rest types fup. 6 poweRin" var words = sentence.split(" ") // get rid of empty entries for (i in words.count-1..0) if (words[i] == "") words.removeAt(i) var results = validate.call(commands, words, minLens) System.write("user words: ") for (j in 0...words.count) {
System.write("%(Fmt.s(-results[j].count, words[j])) ")
} System.write("\nfull words: ") System.print(results.join(" "))</lang>
- Output:
user words: riG rePEAT copies put mo rest types fup. 6 poweRin full words: RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
Yabasic
<lang Yabasic>c$ = "add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3" c$ = c$ + " compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate" c$ = c$ + " 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2" c$ = c$ + " forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load" c$ = c$ + " locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2" c$ = c$ + " msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3" c$ = c$ + " refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left" c$ = c$ + " 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1"
c$ = upper$(c$)
dim chunk$(1)
n = token(c$, chunk$())
dim lonc(n)
for i = 1 to n - 1
v = val(chunk$(i + 1))
if v then
lonc(i) = v
chunk$(i + 1) = ""
else
lonc(i) = len(chunk$(i))
end if
next
inp$ = "riG rePEAT copies put mo rest types fup. 6 poweRin" inp$ = upper$(inp$)
dim w$(1)
x = token(inp$, w$())
dim lonw(x)
for i = 1 to x : lonw(i) = len(w$(i)) : next
for j = 1 to x
p$ = ""
for i = 1 to n
lc$ = left$(chunk$(i), lonw(j)) : lw$ = w$(j)
if (lw$ = lc$) and (lonc(i) <= lonw(j)) p$ = chunk$(i) : break
next
if p$ = "" p$ = "*error*"
r$ = r$ + " " + p$
next
print r$</lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT
zkl
<lang zkl>commands:=Data(0,String, // "add\01\0alter\0..."
- <<<
"add 1 alter 3 backup 2 bottom 1 Cappend 2 change 1 Schange Cinsert 2 Clast 3 compress 4 copy 2 count 3 Coverlay 3 cursor 3 delete 3 Cdelete 2 down 1 duplicate 3 xEdit 1 expand 3 extract 3 find 1 Nfind 2 Nfindup 6 NfUP 3 Cfind 2 findUP 3 fUP 2 forward 2 get help 1 hexType 4 input 1 powerInput 3 join 1 split 2 spltJOIN load locate 1 Clocate 2 lowerCase 3 upperCase 3 Lprefix 2 macro merge 2 modify 3 move 2 msg next 1 overlay 1 parse preserve 4 purge 3 put putD query 1 quit read recover 3 refresh renum 3 repeat 3 replace 1 Creplace 2 reset 3 restore 4 rgtLEFT right 2 left 2 save set shift 2 si sort sos stack 3 status 4 top transfer 3 type 1 up 1" .toUpper().split());
- <<<
var szs=Dictionary(); // [<index>:<length> ...] n:=0; while(n<commands.len()){
cmd,nc := commands.readString(n), n + cmd.len() + 1;
len:=commands.readString(nc);
if(len.matches("[0-9]*")){ szs[n]=len.toInt(); n=nc+len.len()+1 }
else { szs[n]=cmd.len(); n=nc; }
}
testText:="riG rePEAT copies put mo rest types "
" fup. 6 poweRin";
testText.split().apply('wrap(w){
w=w.toUpper(); n:=0;
while(True){ // check for length requirement and, if there, verify
n=commands.find(w,n);
if(Void==n) return("*error*"); // end of loop if no match
c:=commands.readString(n);
if(w.len()>=szs.find(n,99999)) return(c);
n+=c.len();
}
}).concat(" ").println();</lang>
- Output:
RIGHT REPEAT *error* PUT MOVE RESTORE *error* *error* *error* POWERINPUT